ELECTRONIC ORGANIZER MODEL OZ-290HII OPERATION MANUAL Instrucciones abreviadas en español CONTENTS Part Names and Key Assignments ..................................................... 1 Using the Organizer for the First Time ............................................... 2 Auto Power Off Function .............................................................. 3 Backlight ....................................................................................... 3 Adjusting the LCD Contrast .................
NOTICE • SHARP strongly recommends that separate permanent written records be kept of all important data. Data may be lost or altered in virtually any electronic memory product under certain circumstances. Therefore, SHARP assumes no responsibility for data lost or otherwise rendered unusable whether as a result of improper use, repairs, defects, battery replacement, use after the specified battery life has expired, or any other cause.
Part Names Key Assignments : 2nd Function key Activates the second function specifically assigned to the next key tapped.
Using the Organizer for the First Time Be sure to perform the following operations before using the Organizer for the first time. 1. Pull out the battery insulation sheets from the battery compartment on the back of the unit. R E S E T The Organizer starts operation. (The battery insulation sheets were inserted at the factory to prevent battery wear.) 3. Tap f, then x. To tap the touch keys, use the stylus (included in the package). The message will appear as “RESET!”. The Organizer is now initialized.
Auto Power Off Function Adjusting the LCD Contrast When none of the keys has been pressed or tapped for approximately 7 minutes, the Organizer automatically turns the power off to save the batteries. Backlight The Backlight allows you to view the display and use the Organizer even in low-light conditions. Pressing z once illuminates the display for as long as you continue to use the Organizer; if no key activities are detected within the specified interval, it will be turned off automatically.
Display Symbols Display Symbols Hourly Alarm: The Hourly Alarm is ON and will sound every hour. Schedule sign: Appears when the Home clock time reaches a Reminder time or a Start time of a schedule listing. Disappears when the time reaches the End time of the listing. Anniversary sign: Appears when a special day will arrive within days as set in Anniversary Reminder. > UP sign: More information exists above the current display. (Press k.) < DOWN sign: More information exists below the current display.
Characters assigned to s : Entering Characters Moving the Cursor Move the cursor by pressing j, l, k, or m . Making Corrections Entering Characters 1. Inserting or Overwriting characters Entering letters and numbers The initial setting for entering letters is small (lowercase) letters. To enter capital (uppercase) letters, turn “CAPS” on by tapping $. Touch Keyboard Alphabet entry mode Number entry mode Tap i, once or twice, to insert or overwrite characters. 2.
Setting the Home Clock Built-in Calendar and Clock Precautions • Calendar, Schedule, Expense, and Clock modes allow you to enter the desired date and time between Jan. 1, 1950 and Dec. 31, 2150. • If an attempt is made to store an invalid time or date, you will not be able to move the cursor to date entering, or store the time and date by pressing x. Enter the correct value and press x again. • The Organizer has 43 cities according to the time zones (see page 43).
10.Press x to set the Clock. NEW YORK 1 – 24 – 2006 TUE The clock starts from exactly the set time. 2nd 10 : 16 : 15 AM Setting Daylight Saving Time (DST: Summer time) ON/OFF 1. Tap C once to switch the DST setting. When the DST is ON, “ ” appears. NEW YORK 8 – 12 – 200 6 SAT 2nd Selecting the date format (Default: Month-Day-Year) 9 : 43 : 21 AM 1. Tap MENU , select "DATE FORMAT" by using k or m, and press x. 2. Select the desired date format by using k or m, and press x.
Setting the Daily Alarm time Alarm Set up the Daily Alarm to go off at a specified time. The Organizer has 3 kinds of alarm: once, twice, or three times. 1. Daily Alarm.......... Sounds every day at the specified time(for approx. 1 minute), when " " is displayed. Up to 3 alarms can be set separately (Alarm1, Alarm2, and Alarm3). 2. Hourly Alarm........Sounds every hour precisely (every time minutes reach "00"), when " " is displayed. 3. Schedule Alarm...
Telephone Mode Each entry has the following 14 fields. There are three telephone listing categories, Unfiled, Personal, and Business. Each listing can be simply classified for easy access to the data. Tap v, select the desired category by using k or m, and press x.
Entry 6. Press m to move the cursor to the Home # field. 1. Tap v , and select “BUSINESS”, then press x. 7. Enter “585-4280”. SEARCH NAME? The Business search display will appear. 8. Press m to move the cursor to the Office # field and enter “619-5427320”. 9. Enter each field in the same manner. 10.At the Note field, press x to store the telephone listing. 2. Tap e. The display will change to the record input mode. The Business search display will appear.
Search Calendar Mode Last Name Alphabetical Search 1. Tap v and select the Category by using k or m key, then press x. The search display will appear. 2. Press < or > to search for the target listing in alphabetical order. Last Name Direct Search 1. Tap v and select the Category (Business, in this example) by using k or m key, then press x. The search display will appear. SEARCH NAME? sm i s 2. Enter some of the last name letters in order. Up to 10 letters can be entered.
Directly go to the target month Schedule Mode 1. At the Calendar mode, tap =. SEARCH DATE? 08 – 15 – 2006 Date input screen will appear. 2. Enter the target date. 3. Press x. 2nd The monthly calendar of the target date will appear. Note: • In the Calendar mode, monthly calendars from January 1950 to December 2150 are available.
5. Press m. The End time will automatically change to 30 minutes after the Start time. (However, the End time will remain within the specified day.) 9. Enter the name of the scheduled item into the PLAN field. (Project meeting). Up to 96 alphanumeric characters can be entered. 6. Enter 11:00AM for the End time, and press m. 10.Press x to store the schedule listing. 7. Press < or > to select “Yes” or “No” for Alarm setting, and press m.
Date search Anniversary Mode 1. Tap CALENDAR/SCHEDULE once or twice to enter the Schedule mode. 2. Set the desired date. Select the month, day and year field, and enter the desired number. SEARCH DATE? 09 – 11 – 2006 2nd 3. Press x to search for the target schedule listing of the specific date. Pressing < or > can display the listings on that day.
5. Enter the Reminder date from 0 to 9. To Do Mode 6. Press m. 7. Enter “Nancy’s Birthday”. 8. Press x to store the anniversary listing. The anniversary sign ( A ) will not appear until the day is set in Reminder. Search MEMO/ANN Entry You have to visit the HK Exhibition by December 10, 2006. < TO DO> SEARCH DATE? 08 – 12 – 2006 1. Tap TO DO/EXPENSE once or twice to enter the To Do mode. Sequential search 1.
5. Press m to let the status as "PENDING". Date search 6. In the description field, enter what you have to do by the target day. Enter “Visit HK Exhibition”. 1. Tap Up to 96 alphanumeric characters can be entered. TO DO/EXPENSE once or twice to enter the To Do mode. < TO DO> SEARCH DATE? 12 – 10 – 2006 2. Select the month, day or year field, and enter the desired date. 7. Press x to store the To Do listing. 2nd 3. Press x to search for the target To Do listing of the specific date.
Search Memo Mode You can store memos using the Memo mode. Up to 96 alphanumeric characters can be entered per one listing. Sequential Search 1. Tap MEMO/ANN once or twice to enter the Memo mode. The Memo mode search display will appear. 2. Press < or > to search for the listing. Entry Direct Search Enter your passport number: 12AB34567 1. Tap MEMO/ANN once or twice to enter the Memo mode. SEARCH? F 2. Tap e and enter as follows. MEMO : Pa s s po r t No .
The first number depends on your Date Format selection. These examples are in the MM-DD-YYYY format. Expense Mode The Expense record function is an easy-to-use method of tracking personal and business expense information. The Expense Report allows you to see the total expenses for a single day or for a certain period.
10. Press m, and select “YES” or “NO” using < or > in the “RECEIPT” field. AMOUNT : 2nd Summary Report 1200 . PAYMENT : ( CHECK ) RECE I PT : ( YES ) 11. Press m, and enter “Flight ticket” in the “MEMO” field. 12. Press x to store the data. Recall 1. Tap TO DO/EXPENSE once or twice to enter the Expense mode. 2. Press k or m to select "EXPENSE", then press x. The Expense search display will appear. 3. Press < to view the next record, > to view the previous record. 3.
Edit the Category Editing Listings You can change the category name for your convenience. 1. Tap TO DO/EXPENSE once or twice to enter the Expense mode. 2. Press k or m to select "CATEGORY", then press x. ED I T CATEGORY Mea l s Ho t e l Ca r Phone Edit 1. Recall a listing in the desired mode. 2. Tap e. The display will change to the edit mode. 3. Select the category you wish to change using k or m. 3. Edit the data.
Word Translator Mode The Organizer offers an English-Spanish bi-directional word translator function. Each time E S is tapped, the mode switches between the Word Translator mode and the Spell Checker mode. 1. Tap E S once or twice to enter the English → Spanish translation mode; Tap j or l to enter the Spanish → English mode. English field E:1 S: 2. Enter the desired source word and press x. Spanish field The matching English or Spanish word will then be displayed.
Spell Checker Mode Diet Function Mode The Spell Checker Mode can be helpful when the exact spelling of a query word is not known. Each time ABC is tapped, the mode switches between the Spell Checker mode and the Word Translator mode. Searching a word with ambiguous spelling 1. Tap ABC once or twice to enter the Spell Checker Mode. 2. To check spelling, enter the word SPELL and press ENTER to start checking. Maximum length of the pe r s o na l entry word is 36 characters.
Measuring your stride length < > User Profile Mode 3. Fill the STRIDE entry field with USER PROF I LE your stride length value obtained STR I DE i n c h from the above method, and tap 32. m. WE I GHT l b 2nd 4. Enter your body weight value in 0. the WEIGHT field, and tap m. 5. If necessary, follow the above steps to enter the target values for your daily calorie and nutrient intake.
Positioning the unit Close the cover, and insert the unit into the carrying case as shown in the illustration, then make sure that the top flap is fastened. Clip Secure the carrying case clip to your belt or to the top of your shorts or pants. The unit must be attached in vertical position to the ground in order to count steps correctly. • Make sure that the holder’s clip is secured firmly in place. If worn improperly, the unit may be detached or may result in incorrect measurements.
• The calculation runs once every minute to accumulate values. * Based on “ACSM’s Guidelines for Exercise Testing and Prescription”, © American College of Sports Medicine, 2000. Published by Lippincott Williams & Wilkins, 2000. • The displayed calorie value is rounded off to three decimal places. Note: • Check the memory on a regular basis. • When the memory is full, an alert message is displayed, and the pedometer will not record your data.
When no match is found, then a message "NOT FOUND!" is displayed. 4. Use k and m to select the entry 03–2 5 –2006 field for each AMOUNT and the : BUTTER , SA FOOD DATE of the intake to enter LTED values. 717. 2nd You can adjust the portion size by AMOUNT : entering any decimal in the AMOUNT field. Example: 1 = 100g 0.5 = 50g 0.25 = 25g 5. Press ENTER to write the entry. • Tap C•CE to return to the initial display.
4. Tap m, and input values for START DATE and END DATE, followed by ENTER . 5. A report is displayed. • INTAKE : Use k or m to switch display the selected item report. • CONSUMPTION : The report of the selected item is displayed. 2nd FM : 0 3 – 20 – 2006 TO : 03 – 20 – 2006 The icon is displayed when a result exceeds the target value. CALOR I E Kc a l 2000. 2nd < I NTAKE> – –REPORT – – I TEM : The present calorie 20 0. 5. Press ENTER to display your BMI. (Rounded off to one decimal place.
Example Calculator Mode The Organizer’s built-in calculator can perform arithmetic calculations in up to 12 digits. Calculator mode is selected by tapping q the appropriate number of times. O. Each time you press the key, the display switches as follows: Calculation mode ➠ Currency Conversion mode ➠ Metric Conversion mode ➠... Before performing any calculations, tap c twice to clear the display.
Currency Conversion Mode Conversion Mode Each time you tap q , the display switches as follows: Calculation mode ➠ Currency Conversion mode ➠ Metric Conversion mode ➠... Conversion Table Conversion Pattern Unit 1 Unit 2 5 currency conversions are available.
6. Enter the rate; 1.45. Up to 12 numeric characters can be entered for the rate. If you need to clear the rate number, tap c. GBP USD RATE= 1.45 7. Press x to store the setting. Currency conversion Be sure to set the rate before starting a conversion. 1. Tap q the appropriate number of times to select the Currency Conversion mode. Metric Conversion Mode Metric conversion is capable of 12-digit calculation. Convert metric unit Calculate 68°F to °C 1.
Changing the Password Secret Function 1. In the Home Clock mode, tap The Secret function allows you to protect listings with a password, so that no unauthorized person can reach them. You can use up to a 6 characters as its password. Registering a Password As a safeguard, make a written record of the password. Also, be aware that the password is case-sensitive. 1. Tap (secret) in the Home Clock mode. The password entry display will appear. PASSWORD : 0 2. Enter the characters you wish to use.
Game Mode Tap GAME several times to display the Game mode screen and the Diet Function mode screen (Diet Function → BLACKJACK → ALPHA ATTACK → Diet Function → ...). BLACKJACK (Twenty-one) Make your “hand” (the total of the numbers on the cards) close to 21, without going over 21. 1. Tap GAME once, twice, or three times to display the following Game mode screen. 2. Press x to start a game. The left 2 cards are dealt for you. (One is faced up and the other is faced down.) 30 Your chips 3.
ALPHA ATTACK Managing the Organizer's Memory Type in characters (A to Z) displayed on the bottom line to clear them. The game is divided into 20 levels in speed. 1. Tap GAME once, twice, or three times to display the following Game mode screen. LEVEL : 01 2. Press < / > to select the level. • 01: slow, 20: fast 3. Press x to start a game. LEVEL : 03 EYKW 4. Tap the same key as the first character at the left end of the bottom line.
Using the Included PC Software The CD-ROM contains software to enable exchange of data with a PC. The software consists of: Synchronization Software: Can be used to synchronize Microsoft® Outlook® data, such as Contacts, Calendar, Tasks, and Notes, with the Organizer. Desktop Utilities: Can be used to backup/restore data in the Organizer, and export/ import data to different file formats.
Limitations when using with Windows® XP/2000 ® Windows XP • Log onto your PC with administrator privileges; the software may not be installed properly otherwise. Upon using the software, you will need to log on as an administrator. If you are logged in as a non-administrative account, then you must first log off to log into an administrator's account. Windows® 2000 • When installing as well as using the software, you will need to log on as an administrator.
Serial Port Setup Synchronization Software The serial port setting dialog box appears after you have finished software installation. Connecting the Organizer to your PC 1. Turn off the Organizer. 2. Connect the other end of the USB PCLink cable to the Organizer’s option port. 3. Turn on the Organizer. After the Serial Port Setup is complete, the Settings window will appear.
The Conflict Resolution Tab The Connection tab The Synchronization software’s Conflict Resolution tab allows you to select the way data conflicts are resolved when data modifications are made and the “Synchronize” option is selected on the General tab. • Add all conflicting items: Each modification on both the unit and the PC is reflected and saved respectively after synchronization. • Unit overwrites PC data: The PC data will be overwritten.
Export/Import The Export/Import menu of the Desktop Utilities allows you to import data created by each PC application to the unit, or export data out of the unit. • Export: Select the desired item (application data, Food Database, Consumption Record, or Intake Record), then click “Export...” and enter the desired filename to which you wish to export data. • Import: Select the desired application name, then click “Import...” and enter the desired filename from which you wish to import data.
2. When the Install Shield program screen appears, select “Remove”, then click “Next”. 3. For the verification prompt, click on the “OK” button. When the Uninstall window for the USB driver is displayed, disconnect the USB cable and click “Next” to execute the un-installation procedure. 4. When the un-installation procedure is complete, click the “Finish” button to finish.
When the B Symbol Appears 1. Press o to turn the power off. 2. Loosen the screw (turn counterclockwise) and remove the battery holder cover on the back of the unit. 3. Remove one used battery using a ball-point pen or similar object. • Do not use a mechanical pencil or sharp pointed object. 4. Install one new battery with the positive side (+) facing up. 5. Repeat step 3 and 4 for replacing both batteries, if necessary. 6. Replace the battery holder cover and secure with the screw. 7.
Specifications Model: Product name: Display: Memory capacity: User area: Clock mode Accuracy: Display: Clock system: Telephone mode: Calendar mode: Schedule mode: OZ-290HII Electronic Organizer 14 columns x 5 lines with the Backlight 1.5 MB Equivalent* Approx.
Secret function: Protects listings with a password Power consumption: 0.13 W Operating temperature: 0°C ~ 40°C (32°F ~ 104°F) Power supply: – (DC) (Lithium battery CR2032 x 2) 3.0V ... Auto Power Off Function: Approx. 7 minutes Battery life: (at 25°C/77°F) • Approx. 6 months While PEDOMETER is set to ON, with 5 minutes of data search, 55 minutes of data display, and 10000 step counts per day. • Approx. 1800 hours When data is continuously displayed with PEDOMETER set to OFF. • Approx.
Appendix Names and zone numbers of the cities in the clock Zone No. 0 1 2 3 3. 3 4 5 6 6. 3 7 7. 3 8 8. 3 9 9. 3 10 City TONGA AUCKLAND WELLINGTON NOUMEA GUAM SYDNEY ADELAIDE TOKYO SINGAPORE HONG KONG BEIJING BANGKOK YANGON DHAKA NEW DELHI KARACHI KABUL DUBAI TEHRAN RIYADH MOSCOW Zone No.
Declaration of Conformity Electronic Organizer : OZ-290HII USB PC-Link cable: CE-179T This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
ESPAÑOL Instrucciones abreviadas en español ÍNDICE Asegúrese de realizar las operaciones siguientes antes de emplear el Organizador por primera vez. 1. Saque las hojas de aislamiento de las pilas del compartimiento de las pilas situado en la parte posterior de la unidad. T E S E R Empleo del organizador por primera vez ................................ S-1 Función de desconexión automática ....................................... S-2 Luz de fondo ...........................................................
Función de desconexión automática Cuando ninguna de las teclas haya sido pulsada o tocada durante aproximadamente 7 minutos, el Organizador desconectará automáticamente la alimentación para ahorrar energía de las pilas. Luz de fondo La luz de fondo le permitirá ver el visualizador y utilizar el Organizador incluso en condiciones de baja iluminación.
Teclado táctil Modo de introducción de letras Modo de introducción de números NEW YORK 01 – 01 – 2006 SUN 3. Seleccione su ciudad de residencia utilizando < o >. 12 : 05 : 35 AM • Cada vez que se pulse f, el teclado táctil cambiará entre el modo de introducción de letras y el modo de introducción de números. Para pulsar las teclas táctiles, utilice el lapicero (incluido en el paquete). • Pulse sobre el centro de cada tecla.
Búsqueda Modo de teléfono Búsqueda alfabética del apellido Entrada 1. Pulse v , seleccione “BUSINESS”, y luego pulse x. SEARCH NAME? 1. Pulse v y seleccione la categoría utilizando la tecla k o m, luego pulse x. Aparecerá la visualización de búsqueda. 2. Pulse < o > para buscar en orden alfabético la lista deseada. Búsqueda directa del apellido 2. Pulse e. El visualizador cambiará al modo de introducción de registro. 3. Introduzca el apellido. Por ejemplo, “Smith”. 4.
3. Pulse x. Modo de calendario Aparecerá el calendario mensual de la fecha deseada. Navegación en la visualización del calendario mensual 1. Pulse CALENDAR/SCHEDULE una o dos veces para entrar en el modo de calendario. Aparecerá el calendario mensual del mes actual. Parpadeará el día actual. Navegue por el calendario utilizando las teclas siguientes: < > : visualiza el mes 8 – 2006 posterior o anterior.
1. Pulse CALENDAR/SCHEDULE una o dos veces para entrar en el modo de programa de actividades. SEARCH DATE? 08 – 12 – 2006 Aparecerá la visualización de búsqueda del programa de actividades. 2nd La fecha actual se visualizará y el cursor situado en el primer número parpadeará. El primer número depende de su elección del formato de la fecha. Estos ejemplos están en el formato MM-DD-AAAA. 2. Pulse e. Aparecerá la visualización de introducción del programa de actividades.
Búsqueda Modo de aniversario Búsqueda del programa de actividades para hoy 1. Pulse CALENDAR/SCHEDULE una o dos veces para entrar en el modo de programa de actividades. 8 – 12 – 2006 2. Pulse < o > para buscar START : 12 : 15 END : 12 : 45 la lista del programas de ALARM : YES actividades deseada. 2nd REM I NDER : Las listas guardadas en el Organizador se visualizarán en orden cronológico. PM PM Búsqueda de fecha 1.
2. Pulse e. Búsqueda Aparecerá la visualización de cosas a hacer. Búsqueda secuencial 1. Pulse MEMO/ANN una o dos veces para entrar en el modo de aniversario. 2. Pulse < o > para buscar las listas. 3. Introduzca 12 en el campo del mes y luego introduzca 10 y 2006 respectivamente. 2nd 12 – 10 – 2006 PR I OR I TY : ( 1 ) ( PEND I NG ) DESCR I PT I ON : Búsqueda de fechas Introduzca la fecha para ir a la fecha deseada en el paso 2 de arriba y luego pulse x. Consulte también Edición de listas ...........
Búsqueda de fecha < TO DO> SEARCH DATE? 12 – 10 – 2006 1. Pulse TO DO/EXPENSE una o dos veces para entrar en el modo de cosas a hacer. 2. Seleccione el campo del mes, el día o el año y luego introduzca la fecha deseada. 2nd 3. Pulse x para buscar la lista de cosas a hacer deseada de una fecha especificada. Modo de apuntes Puede guardar apuntes empleando el modo de apuntes. Se puede introducir un máximo de 96 caracteres alfanuméricos por lista.
Búsqueda Modo de gastos Búsqueda secuencial 1. Pulse MEMO/ANN una o dos veces para entrar en el modo de apuntes. Aparecerá la visualización de búsqueda del modo de apuntes. 2. Pulse < o > para buscar las listas. Búsqueda directa 1. Pulse MEMO/ANN una o dos veces para entrar en el modo de apuntes. Pa s s po r t No . Aparecerá la visualización de 1 2AB34 567 búsqueda. 2. Introduzca la(s) primera(s) letra(s) del apunte deseado (ej. “pasa”). Se puede introducir un máximo de 10 letras. 3.
6. Seleccione la categoría de gastos utilizando < o >. Hay 8 categorías preajustadas para elegir. Meals ➠ Hotel ➠ Car ➠ Phone ➠ Fares ➠ (Enter’t ) Entertainment ➠ Tips ➠ (Misc) Miscellaneous ➠... 7. Pulse m e introduzca 1200. Se puede introducir un máximo de 12 dígitos. 8. Pulse m. 9. Seleccione el pago utilizando < o >. Hay 4 sistemas de pago preajustados para elegir. 2nd ( Fa r e s ) AMOUNT : 12 00 . PAYMENT : ( CHECK ) Cash ➠ Check ➠ Card ➠ Others ➠... 10.
Edición de listas Modo del traductor de palabras 1. Edición 1. Recupere una lista en el modo deseado. 2. Pulse e. La visualización cambiará al modo de edición. 3. Edite los datos. j l k m: mueve el cursor a la izquierda, derecha, arriba o abajo respectivamente. d: se puede utilizar para borrar caracteres. i: cambia entre el modo INSERT y el modo OVERWRITE. 4. Pulse x para guardar. Este aparato ofrece una función de traducción de inglés a español y viceversa.
Notas: • Las abreviaturas indican lo siguiente: (Am): Inglés americano (Br): Inglés británico (adj): Adjetivo (adv): Adverbio (n): Nombre (pron): Pronombre (v): Verbo (f.): Género femenino (m.): Género masculino • Algunas veces es posible que aparezcan dos palabras idénticas en la lista de palabras. • Introduzca correctamente los caracteres europeos y los espacios. De otra forma, la unidad tal vez no pueda realizar la búsqueda. • En el campo del español, usted podrá introducir las letras siguientes.
Medición de la longitud de su zancada Modo de función dieta La función de dieta podrá organizar su consumo diario de calorías al caminar, así como administrar su toma diaria de calorías. Usted también podrá calcular su índice de masa del cuerpo (BMI), una guía para su salud en términos de obesidad, introduciendo su estatura y su peso.
< > 3. Rellene el campo de introducción USER PROF I LE de STRIDE (zancada) con el valor STR I DE i n c h de la longitud de su zancada 32. obtenido con el método WE I G HT l b 2nd anteriormente indicado, y toque 0. m. 4. Introduzca el valor del peso de su cuerpo en el campo WEIGHT (peso), y toque m. 5. Si es necesario, siga los pasos de arriba para introducir valores objetivos de su toma diaria de calorías y alimentación.
• Cerciórese de que la presilla haya quedado firmemente asegurada en su lugar. Si colocase inadecuadamente la unidad, podría desprenderse u ofrecer mediciones incorrectas. • La presilla para el cinturón ha sido diseñada para sujetar la unidad mientras camine. La presilla puede no sujetar la unidad o puede romperse si la expone a una condición de fuerte impacto, como cuando corra o juegue al béisbol.
Modo de consumo Usted podrá ver el consumo diario de calorías y el cómputo de pasos del día. 1. Toque DIET una, dos o tres veces para entrar en el modo de dieta. 2. Seleccione “CONSUMPTION” (consumo) utilizando k o m, y presione ENTER . 3. Utilice < y > para seleccionar el día que desee visualizar. Para hacer que se visualice el cómputo de paso y el consumo de calorías. • Si no hay datos almacenados, se visualizará el mensaje “NOT FOUND!” (no encont).
Búsqueda y edición 1. Toque DIET una, dos o tres veces para entrar en el modo de dieta. 2. Seleccione “FOOD DATABASE” (bd alim.) utilizando k o m, y presione ENTER . 3. Presione < o > para seleccionar el nombre del alimento deseado. • Usted podrá introducir las primeras letras del nombre del alimento deseado, y después desplazarse por los elementos utilizando < o >. Cuando no haya ninguna concordancia, se visualizará “NOT FOUND” (no encont). 4.
Modo de cálculo del BMI Modo de conversión Usted podrá calcular su índice de masa del cuerpo (BMI), una guía para su salud en términos de obesidad, introduciendo su estatura y su peso. 1. Toque DIET una, dos, o tres veces para entrar en el modo de función de dieta. 2. Seleccione “BMI” utilizando k o m, y presione ENTER . 3. Introduzca el valor del peso de su cuerpo en el campo WEIGHT, y toque m. 4. Introduzca el calor de su estatura en el campo HEIGHT. 5. Presione ENTER para hacer que se visualice su BMI.
6. Introduzca la tasa; 1,45. Para la tasa se puede introducir un máximo de 12 caracteres alfanuméricos. Si necesita borrar el número de la tasa, pulse c. GBP USD RATE= 1.45 Toque varias veces GAME para hacer que se visualice la pantalla del modo de juegos y la pantalla del modo de función dieta (función dieta → BLACKJACK → ALPHA ATTACK → función dieta → ...). BLACKJACK (Veintiuno) 7. Pulse x para almacenar el ajuste.
4. Pulse @ para ver su mano. Cada vez que pulsa @ , se le entrega una carta nueva. Su mano La mano de quien reparte cartas • ”J”, “Q” y “K” cuentan como 10. J 28 • ”A” puede contar como 1 o como 11. 10 • Cuando las 2 primeras cartas Su apuesta sean “A” y una carta de figura (“J”, “Q” o “K”), su mano será “BLACKJACK”. 5. Pulse x para no recibir más cartas y quedarse plantado. A continuación se verá la mano de quien reparte las cartas y los resultados.
Utilización del software de PC incluido El CD-ROM contiene software para activar el intercambio de datos con un PC. El software consiste en: Software de sincronización: Puede resultar útil para sincronizar datos de Microsoft® Outlook® como, por ejemplo, contactos, calendarios, tareas y apuntes, con el Organizador.
Windows® 2000 • Cuando instale o utilice el software, tendrá que entrar en sesión como administrador. Si es necesario, tendrá que ponerse en contacto con el administrador del PC en un entorno de trabajo. Instalación Precauciones: • Antes de instalar el software de sincronización, cerciórese de haber instalado y configurado Microsoft® Outlook®. En caso contrario, instale y configure en primer lugar Outlook®, y después el software de sincronización. • Desconecte el cable USB antes de la instalación.
Conexión del Organizador al PC Ficha general 1. Apague el Organizador. En la ficha general usted podrá: 2. Conecte el otro extremo del cable USB PC-Link al puerto para opciones del Organizador. • Hacer clic en la casilla de verificación de cada aplicación para activar la sincronización con el PC. • Utilizar el botón “Option” o hacer doble clic en la fila de ajustes deseada para configurar el método de comunicación. • Hacer clic en el botón “Default” para reponer los ajustes de opciones. 3.
La ficha PIM Utilidades de escritorio La ficha PIM le permite configurar los ajustes de descarga de los datos PIM Haga clic con el botón derecho del ratón en el icono de sincronización de la bandeja del sistema Windows®, y luego seleccione "Desktop Utilities..." en el menú. • Utilización de Outlook HOME “Address” y “Fax number”: Descarga o sincroniza solamente los datos de las direcciones HOME y los números de FAX.
• Importar: Seleccione el nombre de la aplicación deseada, y luego haga clic en “Import...”, y a continuación introduzca el nombre del archivo deseado del que usted quiere importar datos. Para importar la base de datos de alimentos: 1. Seleccione “Food Database”. 2. Haga clic en el botón “Select Database” para hacer que se visualice la pantalla de importación de la base de datos de alimentos. 3. Seleccione el nombre del grupo de alimentos deseado de la base de datos de alimentos.
2. Cuando aparezca la pantalla del programa Install Shield, seleccione “Remove”, y después haga clic en “Next”. 3. Cuando aparezca el mensaje de verificación, haga clic en el botón “OK”. Cuando aparezca la ventana Uninstall para el controlador USB, desconecte el cable USB y haga clic en “Next” a fin de ejecutar el procedimiento de desinstalación. 4. Cuando termine la desinstalación, haga clic en el botón "Finish" para finalizar el proceso de desinstalación.
Cuando se visualice B Cambio de las pilas OZ-290HII(Sp).pm65 28 • No retire todas las pilas en el mismo tiempo. Retire y instale las pilas una a la vez. 1. Pulse o para desconectar la alimentación. 2. Afloje el tornillo (hacia la izquierda) y retire la cubierta del compartimiento de las pilas ubicada en la parte posterior de la unidad. 3. Retire una pila usada con un bolígrafo u otro objeto similar. • No emplee un lápiz mecánico ni un objeto puntiagudo. 4.
8. Ajuste el reloj a la hora correcta. (Consulte la página S-3.) Precaución: • Los ajustes del reloj y/u otros ajustes y listines podrán perderse cuando las pilas sean retiradas durante mucho tiempo. Reemplace las pilas lo más rápidamente posible. • Confirme que todos los ajustes sean los correctos después de cambiar las pilas. S-29 OZ-290HII(Sp).pm65 29 05.2.
MEMO S-30 OZ-290HII(Sp).pm65 30 05.2.
MEMO S-31 OZ-290HII(Sp).pm65 31 05.2.
MEMO S-32 OZ-290HII(Sp).pm65 32 05.2.
LIMITED WARRANTY SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the “Product”), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.
SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07430-1163 PRINTED IN CHINA/IMPRESO EN CHINA 05AT (TINSE0818EHZZ) OZ-290HII(Cover).pm65 4 05.1.