model 25N-M100 CONTENTS • • • • • • • • • • • • • • Page Important Information .................................... 2 - 3 Important Safeguards .................................... 3 - 4 Supplied Accessories ......................................... 5 Before Operating Your Television ....................... 5 Antenna Connections ......................................... 6 Quick Reference Control Operation .............. 7 - 9 EZ SETUP during First Power On .................... 10 Demo Mode ...............
Welcome to the SHARP Family. We are pleased that you are now the owner of a SHARP Color Television – built for outstanding quality, reliability and performance. Every SHARP Color Television set is tuned and adjusted for proper color and sound, and has passed through the most stringent quality control tests at the factory. We have prepared this OPERATION MANUAL so that you may adjust the picture and color to your personal viewing preference.
Important Information (Continued) WARNING - FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate this equipment. Important Safeguards CAUTION: Please read all of these instructions before you operate your television and save these intructions for later use. Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure your personal safety.
Important Safeguards 14. If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges.
Supplied Accessories Infrared Remote Control Part Number : RRMCG1324CESA Size AA Dry Batteries Before Operating Your Television Location • For normal operation, your TV should be located in an area of the room where cool adequate ventilation is provided. Do not place the back of the television set in a place where free airflow will be restricted. • Any magnetic force may disturb the color picture.
Antenna Connections Antennas • The antenna requirements for good color television reception are more important than those for black & white television reception. For this reason, a good quality outdoor antenna is strongly recommended. The following is a brief explanation of the type of connections that are provided with the various antenna systems: 1. A 75 ohm system is generally a round cable with F-type connector that can easily be attached to a terminal without tools (not supplied).
Quick Reference Control Operation L Location of Controls (ENGLISH) Front Panel VIDEO/AUDIO IN TERMINALS POWER Press → On. Press again → Off. VOLUME UP/DOWN (+) Increases sound. (–) Decreases sound. SENSOR AREA FOR REMOTE CONTROL CHANNEL UP/DOWN (8) Selects next higher channel. (9) Selects next lower channel. • Press both at same time to access MAIN MENU screen. Basic Remote Control Functions Infrared Transmitter Window POWER Press → On. Press again → Off.
Referencia rápida de los controles de operación L Ubicación de los controles (ESPAÑOL) Front Delantero TERMINALES DE ENTRADA VIDEO/AUDIO ALIMENTACION (POWER) Pulsando → Enciende (On). Pulsando nuevamente → Apaga (Off). AUMENTO/DISMINUCION DEL VOLUMEN (VOL) (+) Aumenta el sonido. (–) Disminuye el sonido. ZONA DEL SENSOR DEL MANDO A DISTANCIA Funciones basicas del control remoto CANAL SUPERIOR/INFERIOR (CH) (8) Selecciona el siguiente canal superior. (9) Selecciona el siguiente canal inferior.
Quick Reference Référence rapideControl sur les commandes Operation L Emplacement des touches (FRANÇAIS) Panneau Avant PRISES D’ENTRÉE VIDÉO/AUDIO ALIMENTATION (POWER) Appuyer pour mettre sous tension. Appuyer de nouveau pour mettre hors tension. AUGMENTATION/REDUCTION DU VOLUME SONORE (VOL) (+) Pour augmenter le volume du son. (–) Pour diminuer le volume du son.
EZ SETUP during First Power On L When you turn on the TV for the first time, it will automatically memorize the broadcasting channels. Please perform the following instructions before you press the power button. (1) Insert the batteries into the remote control. (See page 5) (2) Connect the antenna cable to the TV set. (See page 6) (3) Plug in the AC POWER cord to the wall outlet.
Demo Mode • To quickly learn more about the TV set, press and hold for more t h a n three seconds both CH UP (8) and DOWN (9) on the TV set. The TV (On the set) 9 set will go into DEMO mode and briefly explain the various features. • To cancel DEMO mode, again press both CH UP (8) and DOWN (9) on the TV set.
Sleep Timer L You can set the number of minutes for your TV to automatically turn off. 1 2 Press MENU to access MAIN MENU screen. Press VOL (+) or (–) to access TIMER SET mode. → (MAIN MENU screen) 3 4 Press VOL (+) or (–) to set a sleep time of 30, 60, 90 or 120 minutes. Press MENU to exit. → NOTE: (TIMER SET mode) • To turn off the Sleep Timer, repeat the above SLEEP TIMER steps and select “– – – REMAIN” during step 3.
Video Adjust (Continued) 5 Press VOL (+) or (–) to adjust the setting. VOL UP(+) increase contrast VOL DOWN (–) decrease contrast 6 Repeat steps 4 - 5 to adjust other settings. 7 Press MENU to exit. Closed Caption L HOW TO SET CLOSED CAPTION • Your TV is equipped with an internal Closed Caption decoder. “Closed Caption” is a system which allows you to view conversations, narration, and sound effects in TV programs and home videos as subscript on your TV screen as shown on the right.
Closed Caption (Continued) 5 Press VOL (+) or (–) to change the CLOSED CAPTION setting. DATA : MODE : 6 Press MENU to exit. • If a broadcast has CLOSED CAPTION and the MUTE button is pressed, the set enters [CAPTION] mode automatically. Pressing MUTE again will return the set to its previous condition. • Closed Caption may malfunction (white blocks, strange characters, etc.) if signal conditions are poor or if there are problems at the broadcast source.
Parent Control (V-CHIP Operation Continued) Example 2. “R” in the age-based RATING is blocked. This will automatically block the high rating “NC17” and “X” also. NOTE: • MPAA RATING is only age-based ratings.
Parent Control (V-CHIP Operation Continued) Example 2.1 : Content- Based setting For “TV-PG”, “TV-14” and “TV-MA” select unblocked (“– – – –”) for each content rating but leave "AGE" blocked for “TV-PG” and “TV-14” only. TV-Y TV-Y7 TV-G TV-PG TV-14 TV-MA AGE D – – – – L – – – S – – – V – – – FV – – – – – : VIEW : BLOCK MENU : RETURN Example 2.2 : Content-Based setting For “TV-PG”, select "BLOCK" for only “V” (Violence).
Parent Control (V-CHIP Operation Continued) L HOW TO SET V-CHIP REMOTE KEYPAD VOLUME (+)/(–) CHANNEL UP (8)/ DOWN (9) MENU [1] MPAA RATING 1 Press MENU to access MAIN MENU screen. (MAIN MENU screen) 2 Press CH UP (8) or DOWN (9) to move the “ CONTROL”. 3 Press VOL (+) or (–) to access PARENT CONTROL mode, then press VOL (+) or (–) to access V-CHIP select mode. ” mark to “PARENT (PARENT CONTROL mode) 4 Press VOL (+) or (–) to access “MPAA RATING”.
Parent Control (V-CHIP Operation Continued) [2] TV GUIDELINES 1 2 Repeat steps 1 - 3 of [1] MPAA RATING. 3 Press VOL (+) or (–) to access TV GUIDELINES mode. 4 Press CH UP (8) or DOWN (9) to move the “ GUIDELINES”. ” mark to “TV To change CONTENT SETTING, press CH UP (8) or DOWN (9) to move the “ ” to the desired rating and then press VOL (+) or (–) to select.
Parent Control (V-CHIP Operation Continued) [3] ACTIVATE ON TO TURN ON V-CHIP BLOCK 1 Press CH UP (8 ) or DOWN (9 ) to move the “ ” mark to “STATUS”, then press VOL (+) or (–) to activate ON the V-CHIP BLOCK. (If STATUS is OFF, V-CHIP BLOCK will not be operated.) → 2 Press MENU, then “INPUT SECRET No.” will be displayed. 3 Enter the 4-digit SECRET No. using the REMOTE KEYPAD. 4 Press MENU and SECRET No. is registered. L To cancel the V-CHIP BLOCK screen while V-CHIP BLOCK has been activated.
Parent Control (V-CHIP Operation Continued) L To change the V-CHIP BLOCK setting. (Secret No. is registered.) 1 Repeat steps 1 - 3 of [1] MPAA RATING, then “INPUT SECRET No.” will be displayed. 2 Enter the 4-digit SECRET No. using the REMOTE KEYPAD and the V-CHIP select mode will be displayed. Repeat configuration of the V-CHIP BLOCK. L If you intend to change or have forgotten your Secret No., clear the original Secret No. and set up a new one.
Parent Control (V-CHIP Operation Continued) L DOWNLOAD V-CHIP DATA REMOTE KEYPAD VOLUME (+)/(–) CHANNEL UP (8)/ DOWN (9) MENU 1 If you watch the program with “New Rating System Data”, DOWNLOAD screen will be displayed. (DOWNLOAD screen) 2 DOWNLOAD screen will disappear, if DOWNLOAD is finished. NOTE: • DOWNLOAD would not be started if you don’t watch the program with “New Rating System Data”. [3]-B. Additional mode (Example) 1 2 Repeat steps 1 - 2 of [3] Additional mode.
Energy Save L This feature lets you lower the power consumption of your TV set which in turn saves you money and minimizes the impact on the environment. When this feature is turned on, it reduces the brightness of the TV to a level that consumes approximately 20 percent less energy than when the feature is turned off. The reduction in brightness will be less noticeable under low room lighting conditions.
Set Up L EZ SETUP By operating the channel presetting functions, you can preset your TV to the desired channels for viewing. REMOTE KEYPAD VOLUME (+)/(–) CHANNEL UP (8)/ DOWN (9) MENU 1 2 Press MENU to access MAIN MENU screen. Press CH UP (8) or DOWN (9) to move the “ UP”. ” mark to “SET → (MAIN MENU screen) 3 Press VOL (+) or (–) to access SET UP mode, then press CH UP (8) or DOWN (9) to move the “ ” mark to “CH SETTING”. → (SET UP mode) 4 Press VOL (+) or (–) to access CH SETTING mode.
Set Up (Continued) L CHANNEL SETTING If EZ SETUP does not memorize all the channels in your region, follow the instructions below to manually memorize the channel. 1 2 Press MENU to access MAIN MENU screen. Press CH UP (8) or DOWN (9) to move the “ UP”. ” mark to “SET → (MAIN MENU screen) 3 4 Press VOL (+) or (–) to access SET UP mode. Press CH UP (8) or DOWN (9) to move the “ SETTING”. ” mark to “CH → (SET UP mode) 5 Press VOL (+) or (–) to access CH SETTING mode.
Set Up (Continued) L Saving broadcast TV channels into memory. 1.1 Press MENU to access MAIN MENU screen, then press CH UP (8 ) or DOWN (9) to move the “ ” mark to “SET UP”. Press VOL (+) or (–) to access SET UP mode, then press CH UP ( 8 ) or DOWN (9) to move the “ ” mark to “CH SETTING”. Press VOL (+) or (–) to access CH SETTING screen. Press CH UP (8) or DOWN (9) to move the “ ” mark to “CH SEARCH”, then press VOL (+) or (–) to access CH SEARCH mode. 1.2 1.3 1.4 → → → START 2.1 Press VOL (+).
Set Up (Continued) 2.4 Press MENU to exit. REMOTE KEYPAD VOL (+) To add channel 12 to the TV memory VOLUME (+)/(–) CHANNEL UP (8)/ DOWN (9) VOL (–) To erase channel 12 from the TV memory MENU (CH MEMORY (CH MEMORY unmemorized channel) memorized channel) NOTE: • If you press VOL (+) again while in the CH SEARCH mode, auto-program will start again, and the previously memorized channels will be lost. L BLUE SCREEN Automatically turns the screen blue if a broadcast signal is not received.
Using the Video and Audio Input Jacks L Connecting video equipment for playback of video material. • When the television is connected to video equipment as shown below, the material being played back on the video equipment can be seen on the television screen. Connecting video device equipped with video output terminal. CONNECTIONS (Front connection terminals of TV) VIDEO EQUIPMENT Camcorder To VIDEO OUTPUT To AUDIO OUTPUT TV Game L To watch video material playback.
Before Calling for Service PROBLEM QUICK SERVICE CHECK LIST POSSIBLE REMEDY No Playback of VCR and Disk Player No Picture or Sound from External Video/Audio Products Remote Control Doesn’t Work Bars on Screen Picture Distorted Picture Rolls Vertically No Color Poor Reception on Some Channels Weak Picture Lines or Streaks in Picture Ghosts in Picture Picture Blurred Sound OK, Picture Poor Picture OK, Sound Poor No Picture or Sound Dark and Blank Picture External Electrical Noise Interfering with TV’s Ope
Antes de llamar al servicio de reparaciones PROBLEMA LISTA DE COMPROBACIONES DE SERVICIO RAPIDO POSIBLE SOLUCIÓN El vídeo o el reproductor de discos de video no reproducen imágenes El equipo de video/audio externo no produce imágenes ni sonido El mando a distancia no funciona Barras en la pantella Imagen distorsionada La imagen se desplaza verticalmente No hay color Mala recepción de algunos canales Imagen débil Franjas en la imagen Imagen fantasma Imagen borrosa Sonido adecuado, imagen mala Sonido adec
NOTES 30
Limited Warranty CONSUMER LIMITED WARRANTY SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the “Product”), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.
SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07430-2135 Printed in U.S.A.