MINI COMPONENT SYSTEM Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. CD-XP350W Mini Component System consisting of CD-XP350W (main unit), CP-XP350 (front speaker) and GBOXS0094AWM1 (surround speaker). MODEL CD-XP350W OPERATION MANUAL CDXP350WA_FRONT 1 Downloaded From Disc-Player.com Sharp Manuals 02.1.
CD-XP350W Special notes Warning: CAUTION z When the ON/STAND-BY button is set at STAND-BY position, mains voltage is still present inside the unit. When the ON/STAND-BY button is set at STAND-BY position, the unit may be brought into operation by the timer mode or remote control. z This unit contains no user serviceable parts. Never remove covers unless qualified to do so.
Accessories CD-XP350W ENGLISH Please confirm that the following accessories are included. Remote control 1 "AAA" size battery (UM-4, R03, HP-16 or similar) 2 AM loop aerial 1 FM aerial 1 Note: General Information Page Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Controls and indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 7 Preparation for Use System connections .
CD-XP350W ENGLISH Precautions General Volume control z Please ensure that the equipment is positioned in a well-ventilated area and ensure that there is at least 10 cm (4") of free space along the sides, top and back of the unit. The sound level at a given volume setting depends on speaker efficiency, location, and various other factors. It is advisable to avoid exposure to high volume levels, to avoid this do not turn the volume on to full at switch on and listen to music at moderate levels.
Controls and indicators CD-XP350W ENGLISH ! Front panel 9 10 4 5 6 11 7 12 13 14 8 17 18 19 20 15 16 - Controls and indicators - 1 2 3 General Information Reference page 1. Disc Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 2. Timer Set Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 3. On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 4.
CD-XP350W Controls and indicators (continued) ENGLISH Display 1 2 3 4 5 67 8 9 12 13 14 15 16 - Controls and indicators - General Information 10 11 1. CD Pause Indicator 2. Extra Bass Indicator 3. Disc Number Indicators 4. Tape 2 Record Indicator 5. FM Stereo Mode Indicator 6. FM Stereo Receiving Indicator 7. Timer Play Indicator 8. Sleep Indicator 9. Timer Recording Indicator 10.CD Play Indicator 11.CD Repeat Play Indicator 12.Karaoke Mode Indicator 13.Tape Reverse Mode Indicator 14.
CD-XP350W ENGLISH Front speaker Placing the speaker system To enjoy the surround effect, we recommend that you place each speaker as shown to the below. Main unit 3 Surround speaker (Right) Surround speaker (Left) 4 1. Tweeter 2. Woofer 3. Bass Reflex Duct 4. Speaker Wire Installation of the surround speakers: If possible, mount the surround speakers on the wall. Install them 60 cm - 90 cm (23" - 35") above the height of your ears when you are seated.
CD-XP350W Controls and indicators (continued) ENGLISH Remote control Reference page 1 - Controls and indicators - General Information 2 E-7 14 3 15 4 5 6 7 8 16 17 18 19 20 9 10 11 12 13 21 1. Remote Control Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 2. On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 3. Disc Number Select Buttons . . . . . . . . . . . . . . . . . . . . . . . .14, 16, 23 4.
System connections CD-XP350W Surround speaker (Right) ENGLISH Aerial connection AM loop aerial FM aerial Surround speaker (Left) Transport screw Supplied FM aerial: Connect the FM aerial wire to the FM 75 OHMS terminal and position the FM aerial wire in the direction where the strongest signal can be received. Supplied AM loop aerial: Placing the aerial on the stereo system or near the AC power lead may cause noise pickup. Place the aerial away from the stereo system for better reception.
CD-XP350W System connections (continued) ENGLISH Speaker connection Front speakers Connect the black wire to the FRONT (-) terminal, and the red wire to the FRONT (+) terminal. To mount the surround speakers on the wall The design of the surround speakers allows them to be hung on the wall. Be sure to use the type and size of screw that is shown to the below. Surround speakers Connect the black wire to the SURROUND (-) terminal, and the grey wire to the SURROUND (+) terminal.
CD-XP350W ENGLISH Setting the AC voltage selector Setting the FM/AM span selector Check the setting of the AC voltage selector located on the rear panel before plugging the unit into a wall socket. If necessary, adjust the selector to correspond to the AC power voltage used in your area. Turn the selector with a screwdriver until the appropriate voltage number appears in the window (110 V, 127 V, 220 V or 230 V - 240 V AC).
CD-XP350W General control ENGLISH Remote control Battery installation 1 Open the battery cover. 2 Insert the batteries according to the direction indicated in the battery compartment. When inserting or removing the batteries, push them towards the battery terminals. Preparation for Use - General control / Remote control - 3 Close the battery cover. Precautions for battery use: Demonstration mode z Replace all old batteries with new ones at the same time. z Do not mix old and new batteries.
Sound control CD-XP350W Extra bass (X-BASS)/Pre-programmed equaliser ENGLISH (Main unit operation) You can select the extra bass and pre-programmed equaliser modes with the same button on the main unit. Changing the mode: Bass frequencies are emphasised. FLAT (X-BASS off) The sound is not modified. POPS (X-BASS off) Bass and treble are slightly emphasised. ROCK (X-BASS off) Bass and treble are emphasised. CLASSIC (X-BASS off) Treble is reduced a lot.
CD-XP350W Setting the clock ENGLISH 4 Press the TUNING/TIME ( or ) button to adjust the hour and then press the MEMORY/SET button. z Press the TUNING/TIME ( or ) button once to advance the time by 1 hour. Hold it down to advance continuously. z When the 12-hour display is selected, "AM" will change automatically to "PM". Press the TUNING/TIME ( or ) button to adjust the minutes and then press the MEMORY/SET button. In this example, the clock is set for the 24-hour (0:00) display.
Listening to a CD (CDs) CD-XP350W ENGLISH Press the OPEN/CLOSE button to close the disc tray. Total number of tracks on the CD whose number is flashing 1 2 3 4 Press the ON/STAND-BY button to turn the power on. Press the CD button. Press the OPEN/CLOSE button to open the disc tray. Place the CD(s) on the disc tray, label side up. When loading a third disc, press the DISC SKIP button to turn the disc tray, then place the CD in the open position.
CD-XP350W Listening to a CD (CDs) (continued) ENGLISH To locate the beginning of a track To move to the beginning of the next track: Press the / button for less than 0.5 seconds during playback. / button repeatedly until the dez You can skip to any track by pressing the sired track number appears. To restart the track being played: Starting playback with a desired track You can play a disc starting with the desired track.
CD-XP350W ENGLISH Repeat play Programmed play All tracks on up to 3 discs, or a programmed sequence can be continuously repeated. You can choose up to 32 selections for playback in the order you like. ( Whilst in the stop mode, press one of the 1 - 3 buttons on the remote control to select the desired disc. 2 Press the / or / select the desired track. ) button twice. button to You can also select a track by pressing the control.
CD-XP350W Listening to the radio ENGLISH Tuning 1 2 Press the ON/STAND-BY button to turn the power on. 3 Press the TUNING/TIME ( station. Manual tuning: Press the TUNER (BAND) button repeatedly to select the desired frequency band (FM or AM). or ) button to tune in to the desired Press the TUNING/TIME button as many times as required to tune in to the desired station. When the TUNING/TIME button is pressed for more than 0.
CD-XP350W ENGLISH Memorising a station To recall a memorised station You can store 40 AM and FM stations in memory and recall them at the push of a button. (Preset tuning) Perform steps 1 - 3 in "Tuning" on page 17. Press the MEMORY/SET button to enter the preset tuning saving mode. Within 30 seconds, press the PRESET ( preset channel number. or ) button to select the Store the stations in memory, in order, starting with preset channel 1.
CD-XP350W Listening to a cassette tape (TAPE 1) ENGLISH Tape Playback - Listening to a cassette tape (TAPE 1) - Before playback: z For playback, use normal or low-noise tapes for the best sound. (Metal or CrO tapes are not recommended.) z Do not use C-120 tapes or poor-quality tapes, as they may cause malfunctions. z Before loading a tape into the cassette compartment, tighten the slack with a pen or a pencil. E-19 1 2 3 Press the ON/STAND-BY button to turn the power on.
Listening to a cassette tape (TAPE 2) CD-XP350W 4 Load a cassette into the TAPE 2 cassette compartment with side A facing you. 5 Press the button to choose one side or both sides. Tape Playback Open the cassette door by pushing the area marked " PUSH EJECT". ... To listen to both sides. ... For endless repeat play of both sides. ... To listen to one side. 6 Press the ( for side B. ) button to listen to side A, or the ( T-2) button To play both sides ( ), start from side A.
CD-XP350W Playing karaoke ENGLISH You can enjoy karaoke to CDs, radio, cassettes, and other external devices by connecting a separately available microphone to this unit. 1 Set the MIC LEVEL control to MIN to protect the speakers from shock noise and to avoid disturbing noises. 2 Connect the microphone to the MIC socket. z Use a microphone with a 6.3 mm (1/4") plug, an impedance of 600 ohms. z Use a standard plug adaptor when using a microphone with a 3.5 mm (1/8") diameter plug.
CD-XP350W ENGLISH Notes: z The initial audio mode setting is "STEREO". z In any mode other than the STEREO mode, " " will appear. z The setting will remain unchanged when you change the disc, you set the unit to the stand-by mode or the function is changed from the CD to another function. z When playing a sound multiplexed disc on which a vocal and music have been separately recorded, select the audio mode as desired.
CD-XP350W Recording to a cassette tape ENGLISH Before recording: z When recording important selections, make a preliminary test to ensure that the desired material is properly recorded. z SHARP is not liable for damage or loss of your recording arising from malfunction of this unit. z The volume and sound controls can be adjusted with no effect on the recorded signal (Variable Sound Monitor). z For recording, use only normal tapes. Do not use metal or CrO tapes.
CD-XP350W ENGLISH Recording from the radio You can record from TAPE 1 to TAPE 2. Tune in to the desired station. (See page 17.) Load a cassette into the TAPE 2 cassette compartment with side A facing you. 1 2 Wind past the leader of the tape, on which recording cannot be performed. It is recommended that the recording tape is the same length as the master tape. Press the button to choose one side or both sides. 3 ... To record on both sides. ... To record on only one side.
CD-XP350W Timer and sleep operation ENGLISH Timer playback: The unit turns on and plays the desired source (CD, tuner, tape) at the preset time. Timer playback or timer recording Before setting timer: Timer recording: The unit turns on and starts recording from the tuner at the preset time. 1 Press the CLOCK button to check that the clock is on time. 2 For timer playback: Load a cassette or discs to be played. For timer recording: Load a cassette for recording in the TAPE 2 cassette compartment.
CD-XP350W ENGLISH 6 7 Press the TUNING/TIME ( or ) button to specify the minutes, then press the MEMORY/SET button. Sleep operation 1 2 Play back the desired sound source. Press the TIMER/SLEEP button repeatedly until "SLEEP" is displayed. The unit will enter the timer stand-by mode automatically. Press the ON/STAND-BY button to turn the power on. 8 When the preset time is reached, playback or recording will start.
CD-XP350W Enhancing your system ENGLISH The connection lead is not included. Purchase a commercially available lead as shown below. VCR, DVD, etc. To the line output sockets Red 1 Use a connection lead to connect the VCR, DVD, etc. to the VIDEO/ AUX sockets. When using video equipment, connect the audio output to this unit and the video output to a television. 2 3 4 Press the ON/STAND-BY button to turn the power on. Press the VIDEO/AUX button. Play the connected equipment.
Troubleshooting chart Symptom z The clock is not on time. Possible cause z Did a power failure occur? Reset the clock. (Refer to page 13.) z When a button is pressed, the unit z Set this unit to the power stand-by mode does not respond. and then turn it back on. z If the unit still malfunctions, reset it. (Refer to page 29.) z No sound is heard.
CD-XP350W Troubleshooting chart (continued) Maintenance If trouble occurs Cleaning the tape-handling parts ENGLISH When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is operated incorrectly, it may malfunction. If such a problem occurs, do the following: 1 Set the unit to the stand-by mode and turn the power on again.
Specifications As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. ! General Output terminals Input terminals Front speakers: MPO: 210 W (105 W + 105 W) (10 % T.H.D.) RMS: 140 W (70 W + 70 W) (10 % T.H.D.) RMS: 100 W (50 W + 50 W) (0.9 % T.H.
SHARP CORPORATION 9906 TINSZ0832AWZZ B0202.HK 02/1/24 Downloaded From Disc-Player.com Sharp Manuals CD-XP350W(A)_BACK.
