XL-MP130 MINI COMPONENT SYSTEM Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. CD-SW200 Mini Component System consisting of CD-SW200 (main unit), CP-S200 (front speaker) and CP-SW200 (Subwoofer). MODEL CD-SW200 OPERATION MANUAL Accessories Please confirm that the following accessories are included.
CD-SW200 SPECIAL NOTES Important Instruction CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
IMPORTANT SAFETY INSTRUCTIONS be read before the product is operated. 2 Retain Instructions - The safety and operating instructions should be retained for future reference. 3 Heed Warnings - All warnings on the product and in the operating instructions should be adhered to. 4 Follow Instructions - All operating and use instructions should be followed.
CD-SW200 IMPORTANT SAFETY INSTRUCTIONS (continued) 15 Outdoor Antenna Grounding - If an outside antenna or cable system 19 Object and Liquid Entry - Never push objects of any kind into this is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges.
Contents CD-SW200 Page General Information ENERGY STAR® Program Information Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Controls and indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 - 10 Products that have earned the ENERGY STAR® are designed to protect the environment through superior energy efficiency. System connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 - 13 Remote control . . . . . . . . . . . . . .
CD-SW200 Precautions General Please ensure that the equipment is positioned in a well ventilated area and ensure that there is at least 4" (10 cm) of free space along the sides, top and back of the equipment. 4" (10 cm) 4" (10 cm) Hold the AC power plug by the head when removing it from the AC outlet, as pulling the cord can damage internal wires. Do not remove the outer cover, as this may result in electric shock. Refer internal service to your local SHARP service facility.
Controls and indicators CD-SW200 1 2 3 13 14 15 4 5 6 7 16 17 18 8 19 9 10 20 21 22 11 Reference page 1. Disc Trays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 2. Timer Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 3. Power On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . 15 4. Disc Track Up or Fast Forward, Tape 2 Fast Forward, Tuner Preset Up, Time Up Button . . . . . . . . . . . 16, 19, 29, 31 5.
CD-SW200 Controls and indicators (continued) 1 2 3 4 5 6 7 8 9 11 12 13 16 17 General Information 10 18 14 19 15 3 4 5 6 1 7 8 9 2 Display Reference page 1. Disc Number Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 2. MP3/WMA Folder Indicator . . . . . . . . . . . . . . . . . . . . . . . . . 24 3. MP3/WMA Title Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . 24 4. MP3 Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CD-SW200 Front Speaker 1. Tweeter 2. Super Tweeter 3. Woofer 4. Bass Reflex Duct 5. Speaker Wire 1 2 3 5 Subwoofer 1. Subwoofer 2. Bass Reflex Duct 3. Subwoofer Light-Up Wire 4. Speaker Wire 1 General Information 4 2 3 4 9 03/12/17 CD-SW200 _2-14.
CD-SW200 Controls and indicators (continued) Remote control 1 General Information 2 7 8 9 13 17 CD 10 11 14 18 15 19 20 3 16 22 21 23 24 4 5 6 25 26 27 28 12 Reference page 1. Remote Control Transmitter . . . . . . . . . . . . . . . . . . . . . . . . 14 2. Disc Number Select Buttons . . . . . . . . . . . . . . . . . . . . . . . . 18 3. Cursor Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 4. Character Input/Disc Direct Search Buttons . . . . . . . .
System connections CD-SW200 Make sure to unplug the AC power cord before any connections. Antenna connection (see page 12) Right speaker Speaker connection (see page 12) AM loop antenna Left speaker Subwoofer Preparation for Use FM antenna AC Outlet (AC 120 V, 60 Hz) AC power connection (see page 13) 11 03/12/17 CD-SW200 _2-14.
CD-SW200 System connections (continued) Antenna connection Speaker connection Supplied FM antenna: Connect the FM antenna wire to the FM 75 OHMS terminal and position the FM antenna wire in the direction where the strongest signal can be received. Preparation for Use Supplied AM loop antenna: Connect the AM loop antenna to the AM LOOP jack. Position the AM loop antenna for optimum reception. Place the AM loop antenna on a shelf, etc., or attach it to a stand or a wall with screws (not supplied).
CD-SW200 Subwoofer Left speaker Main unit Right speaker Table Floor Note: The speaker grilles are not removable. AC power connection After checking all the connections have been made correctly, plug the AC power cord of this unit into the AC outlet. If you plug in the unit first, the unit will enter the demonstration mode. Demonstration mode The first time the unit is plugged in, the unit will enter the demonstration mode. You will see words scroll and the subwoofer will light up in flashing mode.
CD-SW200 Remote control Battery installation Use 2 “AA” size batteries (UM/SUM-3, R6, HP-7 or similar). Batteries are not included. 1 2 Preparation for Use 3 Open the battery cover. Insert the batteries according to the direction indicated in the battery compartment. When inserting or removing the batteries, push them toward the battery terminals. Close the battery cover. Notes concerning use: Replace the batteries if the operating distance is reduced or if the operation becomes erratic.
General control CD-SW200 Volume control CD-SW200 Main unit operation: When the VOLUME control is turned clockwise, the volume will increase. When it is turned counterclockwise, the volume will decrease. Remote control operation: Press the VOLUME (+ or -) button to increase or decrease the volume. 0 ..... 30 MAXIMUM Equalizer To turn the power on Press the ON/STAND-BY button to turn the power on. After use: Press the ON/STAND-BY button to enter the power stand-by mode.
CD-SW200 Setting the clock 5 Press the or button to adjust the hour and then press the MEMORY/SET button. CD-SW200 Press the or button once to advance the time by 1 hour. Hold it down to advance continuously. Basic Operation 6 In this example, the clock is set for the 12-hour (AM 12:00) display. 1 2 3 Press the ON/STAND-BY button to turn the power on. 4 Press the or button to select 12-hour or 24hour display and then press the MEMORY/SET button. Press the CLOCK/TIMER button.
Listening to a CD or MP3/WMA disc MP3: MP3 is a form of compression. It is an acronym which stands for MPEG Audio Layer 3. MP3 is a type of audio code which is processed by significant compression from the original audio source with very little loss in sound quality. This system supports MPEG 1 Layer 3, MPEG 2 Layer 3, and VBR files. During VBR file playback, time counter in the display may differ from its actual playback time.
CD-SW200 Listening to a CD or MP3/ WMA disc (continued) CD or MP3/WMA disc Playback CD-SW200 1 2 3 Press the ON/STAND-BY button to turn the power on. 4 Place the disc on the disc tray 1, label side up. Be sure to place 3" (8 cm) disc in the middle of the disc trays. Press the CD button. Press the 1 button and within 5 seconds, press the OPEN/CLOSE button to open the disc tray 1. 5" (12 cm) 5 3" (8 cm) Press the OPEN/CLOSE button to close the disc tray 1.
CD-SW200 Various disc functions Function Main unit Remote control Operation Play Press in the stop mode. To exchange other discs while playing a disc: Press one of the 1 - 5 buttons for the stopped disc and within 5 seconds, press the OPEN/CLOSE button and exchange discs. Stop Press in the playback mode. To remove the discs: In the stop mode, press the 1 press the OPEN/CLOSE button. Pause Press in the playback mode. Press the / button to resume playback from the paused point.
CD-SW200 Listening to a CD or MP3/ WMA disc (continued) CD or MP3/WMA disc Playback Notes for CD: Track up/track down is possible only within individual discs. Fast forward/fast reverse is possible only within individual discs. When the end of the last track is reached during fast forward, "END" will appear on the display and CD operation will be paused. When the beginning of the first track is reached during fast reverse, the unit will enter the playback mode.
Advanced CD or MP3/WMA disc playback To specify a disc to play You can play a disc by specifying the disc number. Press one of the 1- 5 buttons to select the desired disc. Direct track search By using the direct search buttons, the desired tracks on the current disc can be played. Use the direct search buttons on the remote control to select the desired track while playing the selected disc. Selected track number Selected disc number 2 Within 5 seconds, press the DIRECT PLAY button on the main unit.
CD-SW200 Advanced CD or MP3/WMA disc playback (continued) Repeat play Repeat play can play all 5 discs, all tracks on a chosen disc, or a programmed sequence continuously. CD or MP3/WMA disc Playback To repeat all tracks on up to 5 discs: Press the / button twice. Random play The tracks on the disc(s) can be played in random order automatically. To random play all tracks on up to 5 discs: Press the RANDOM button on the remote control.
Programmed play While in the stop mode, press the MEMORY/SET (MEMORY) button to enter the programming save mode. To clear the programmed selections: Press the CLEAR/DIMMER button on the remote control while the "MEMORY" indicator is flashing. Each time the button is pressed, one track will be cleared, beginning with the last track programmed. Press one of the 1 - 5 buttons to select the desired disc.
CD or MP3/WMA disc Playback CD-SW200 MP3/WMA navigation (only for MP3/WMA files) MP3/WMA navigation: You can search and play files by folder or title. For example, when you assign three titles to a file, enter genre (such as jazz) as title 1, album name as title 2, and music title as title 3 to search the file by any title. You can search and play files by folder or title 1/2/3 within one MP3/WMA disc (see page 25).
CD-SW200 File search (by folder or title 1/2/3) You can search and play files by folder or title 1/2/3 within one MP3/ WMA disc. 1 Press one of the 1 5 buttons to select a disc tray containing an MP3/WMA disc. 2 Press the disc. 3 Press the CD button to stop playback. "NAVI READ" appears and the display shows the total number of folders and files on the selected disc. Use the or cursor button to scroll and select a folder (or title), and then press the ENTER button.
CD-SW200 MP3/WMA navigation (only for MP3/WMA files) (continued) Character search (for folder or title 1/2/3) CD or MP3/WMA disc Playback By entering a name, you can search files by folder or title 1/2/3 within one MP3/WMA disc. 1 Perform steps 1 - 3 in "File search (by folder or title 1/2/3)" on page 25. 2 3 Press the NAVIGATION button. 4 5 6 Press the , , or cursor button on the remote control to select "FOL", "T-1", "T-2" or "T-3". To search files by folder name, select "FOL" (will flash).
CD-SW200 1 2 3 4 Perform steps 1 - 3 in "File search (by folder or title 1/2/3)" on page 25. Press the , , or cursor button on the remote control to select "FOL", "T-1", "T-2" or "T-3" and then press the ENTER button. The total number of folders (or titles) appears for 2 seconds, and names of the first 2 folders (or titles) are displayed. Press the or cursor button to select the desired folder (or title) and then press the MEMORY button. Repeat step 4 for other folders (or titles).
CD-SW200 Listening to the radio Tuning 1 2 Press the ON/STAND-BY button to turn the power on. 3 Press the TUNING ( station. Press the TUNER (BAND) button repeatedly to select the desired frequency band (FM or AM). or ) button to tune in to the desired Radio Manual tuning: Press the TUNING button as many times as required to tune in to the desired station. Auto tuning: When the TUNING button is pressed for more than 0.
CD-SW200 Memorizing a station 1 2 Perform steps 1 - 3 in "Tuning" on page 28. 3 Within 30 seconds, press the PRESET ( or ) button to select the preset channel number. Store the stations in memory, in order, starting with preset channel 1. 4 Press the MEMORY/SET (MEMORY) button to enter the preset tuning saving mode. To recall a memorized station Press the PRESET ( or lect the desired station. To scan the preset stations The stations saved in memory can be scanned automatically.
CD-SW200 Listening to a cassette tape (TAPE 1 or TAPE 2) Tape Playback Before playback: For playback, use normal or low-noise tapes for the best sound. (Metal or CrO tapes are not recommended.) Do not use C-120 tapes or poor-quality tapes, as they may cause malfunctions. Before loading a tape into the cassette compartment, tighten the slack with a pen or a pencil. Tape playback 1 2 Press the ON/STAND-BY button to turn the power on.
Recording on a cassette tape Function Main unit Remote control Operation Playback Press in the stop mode. Stop Press in the playback, fast forward or rewind mode. Fast forward/ Rewind (TAPE 2 only) Press in the playback or stop mode. Before recording: When recording important selections, make a preliminary test to ensure that the desired material is properly recorded. SHARP is not liable for damage or loss of your recording arising from malfunction of this unit.
CD-SW200 Recording on a cassette tape (continued) Recording from a CD or MP3/WMA disc You can record the desired disc using the DIRECT PLAY button. 1 2 3 Tape Recording 4 Press the ON/STAND-BY button to turn the power on. Press the CD button. Load a cassette into the TAPE 2 cassette compartment with the side to be recorded on facing you. Wind past the leader of the tape, on which recording cannot be performed. Press the button. Recording will be paused.
CD-SW200 To perform programmed recording: 1 Program discs and tracks (see page 23). 2 Press the button. 3 Press the / ( ) button to start recording. Dubbing from tape to tape You can record from TAPE 1 to TAPE 2. 1 2 Press the ON/STAND-BY button to turn the power on. Load a prerecorded cassette into the TAPE 1 cassette compartment. Insert a blank tape into the TAPE 2 cassette compartment. To stop recording: Press the (TAPE ) button. The disc and tape will stop.
CD-SW200 Timer and sleep operation Timer playback: The unit turns on and plays the desired source (CD, tuner, tape) at a preset time. Timer recording: The unit turns on and starts recording from the tuner at the preset time. CD-SW200 This unit has 2 types of timer: ONCE TIMER and DAILY TIMER. Advanced Features Once timer: Once timer play or once timer recording works for one time only at a preset time. For example, if you are away but want to record a program on a radio station.
4 Within 10 seconds, press the or button to select "ONCE SET" or "DAILY SET", and press the MEMORY/ SET button. 5 Press the or button to select "PLAY" or "REC", and press the MEMORY/SET button. White Red 9 Switch input with the or button, and then press the MEMORY/SET button. To select the timer playback source: CD, TUNER, TAPE 1 or TAPE 2. To select the timer recording source: TUNER. When you select the tuner, select a station by pressing the or button, and then press the MEMORY/SET button.
CD-SW200 Timer and sleep operation (continued) 12 When the preset time is reached, playback or recording will start. The volume will increase gradually until it reaches the preset volume. Advanced Features 13 When the timer end time is reached, the system will enter the power stand-by mode automatically. Once timer: The timer will be canceled. Daily timer: The timer will operate at the same time every day. It will continue until the daily timer setting is canceled.
CD-SW200 1 2 3 4 Play back the desired sound source. Press the CLOCK/TIMER button. Within 10 seconds, press the or button to select "SLEEP", and press the MEMORY/SET button. Press the or button to select the time. (Maximum: 3 hours - Minimum: 1 minute) 3 hours - 5 minutes 5-minute intervals 5 minutes - 1 minute 1-minute intervals 5 6 Press the MEMORY/SET button. "SLEEP" will appear. The unit will enter the power stand-by mode automatically after the preset time has elapsed.
CD-SW200 Enhancing your system Listening to playback sounds of Game, VCR, DVD, etc. The connection cord is not included. Purchase a commercially available cord as shown below. Game, VCR, DVD player, etc. 1 2 To the line output jacks Advanced Features Connect a TV to the rear VIDEO OUT jacks. Switch the TV input to auxiliary. CD-SW20 3 4 5 Yellow White Connect a video game system, VCR, DVD, etc. to the front GAME INPUT (VIDEO, AUDIO L and R) jacks.
Troubleshooting chart Many potential problems can be resolved by the owner without calling a service technician. If something is wrong with this product, check the following before calling your authorised SHARP dealer or service centre. General Symptom The clock is not set to the correct time. When a button is pressed, the unit does not respond. CD-SW200 No sound is heard. Possible cause Did a power failure occur? Reset the clock. (Refer to page 16.
CD-SW200 Troubleshooting chart (continued) Cassette deck Symptom Cannot record. References Cannot record tracks with proper sound quality. Cannot erase completely. Sound skipping. Cannot hear treble. Sound fluctuation. Cannot remove the tape. Tuner Possible cause Is the erase-prevention tab removed? Is it a normal tape? (You cannot record on a metal or CrO tape.
CD-SW200 Note: If neither operation above restores the unit, clear all the memory by resetting it. Clearing all the memory (reset) 1 2 Press the ON/STAND-BY button to enter the power stand-by mode. While pressing down the button and the X-BASS (SURROUND)/DEMO button, press the TUNING button until "CLEAR ALL" appears. Before transporting the unit Remove all CDs from the unit. Make sure there is no CD in the disc tray. Then, set the unit to the power stand-by mode.
CD-SW200 Maintenance Specifications Cleaning the tape-handling parts Dirty heads, capstans or pinch rollers can cause poor sound and tape jams. Clean these parts with a cotton swab moistened with commercial head/pinch roller cleaner or isopropyl alcohol. When cleaning the heads, pinch rollers, etc., unplug the unit which contains high voltages.
CD-SW200 CD player D/A converter Frequency response Dynamic range 5-disc multi-play compact disc player Non-contact, 3-beam semiconductor laser pickup 1-bit D/A converter 20 - 20,000 Hz 90 dB (1 kHz) Tuner Frequency range FM: 87.5 - 108.
CONSUMER LIMITED WARRANTY SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the "Product"), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.