CD-C422/C422C/C2800/C2800C SERVICE MANUAL No. S3820CDC422// CD-C422/C422C CP-C422, REAR SPEAKER SYSTEM, Constitute CD-C422/C422C. CD-C2800/C2800C CP-C2800, REAR SPEAKER SYSTEM, Constitute CD-C2800/C2800C. Illustration: CD-C422/C422C • In the interests of user-safety the set should be restored to its original condition and only parts identical to those specified be used. Illustration: CD-C2800/C2800C CONTENTS Page IMPORTANT SERVICE NOTES (For U.S.A. Only) ..............................................
CD-C422/C422C/C2800/C2800C FOR A COMPLETE DESCRIPTION OF THE OPERATION OF THIS UNIT, PLEASE REFER TO THE OPERATION MANUAL. IMPORTANT SERVICE NOTES (For U.S.A.Only) BEFORE RETURNING THE AUDIO PRODUCT (Fire & Shock Hazard) Before returning the audio product to the user, perform the following safety checks. 1. Inspect all lead dress to make certain that leads are not pinched or that hardware is not lodged between the chassis and other metal parts in the audio product. 2.
CD-C422/C422C/C2800/C2800C NAMES OF PARTS CD-C422/C422C/ C2800/C2800C Front Panel 1. Disc Tray 2. Disc Skip Button 3. Open/Close Button: 2 3 1 4. Disc Number Indicator 5. Timer Indicator 6. Record Indicator 7. Sleep Indicator 8. Extra Bass Indicator: X-BASS 9. Function/CD Track/CD Counter/Frequency/Preset Channel/Volume/Timer/Sleep Time Indicator 10. Memory Indicator 11. FM Stereo Mode Indicator: ST 12. FM Stereo Indicator: 13. CD Repeat Indicator: 14. CD Play Indicator: 15.
CD-C422/C422C/C2800/C2800C Speaker Section Front Speaker CP-C422 CP-C422 1 1. Super Tweeter 2. Woofer 3. Bass Reflex Duct 4. Speaker Wire 2 3 CP-C2800 5. Tweeter 6. Super Tweeter 7. Woofer 8. Bass Reflex Ducts 9. Speaker Wire 4 CP-C2800 Rear Speaker 5 6 REAR SPEAKER SYSTEM 10. Full Range Speaker 11. Speaker Wire 7 8 9 10 11 CD-C422/C422C/ C2800/C2800C 1 Remote Control 1. Remote Control Transmitter LED CD Control section 2. Disc Number Select Buttons 3. Track Down/Review Button: 4.
–5– 9 8 7 6 5 4 3 2 CLOCK MEMORY/ SET POWER AM 12:00 AM 0:00 0:00 TUNING/ TIME ( ) In this example, the clock is set for the 12hour (AM 12:00) system. SETTING THE CLOCK Within 3 seconds, press the MEMORY/SET button. Press the CLOCK button. Press the POWER button to turn the power off. Press the TUNING/TIME ( or Press the MEMORY/SET button. ) button to adjust the hour. Press the TUNING/TIME ( minutes. or Press the MEMORY/SET button.
Red Rojo LEFT RIGHT LEFT FRONT SPEAKERS REAR SPEAKERS RATED SPEAKER IMPEDANCE: 5.4 OHMS MIN . 16 OHMS MIN . RIGHT Red Rojo –6– + + ● Batteries are not included. ● Las pilas no están incluidas. ● 2 "AA" batteries ● Dos pilas "AA" Remote control Control remoto POWER POWER 15 15 8" - 20' (0.
CD-C422/C422C/C2800/C2800C DISASSEMBLY CD-C422/C422C/ C2800/C2800C Caution on Disassembly Follow the below-mentioned notes when disassembling the unit and reassembling it, to keep it safe and ensure excellent performance: 1. Take cassette tape and compact disc out of the unit. 2. Be sure to remove the power supply plug from the wall outlet before starting to disassemble the unit. 3. Take off nylon bands or wire holders where they need to be removed when disassembling the unit.
CD-C422/C422C/C2800/C2800C ( E1 ) x2 ø3 x10mm ( H1 ) x1 ø3 x10mm Switch PWB Front Panel ( E1 ) x3 ø3 x10mm ( H2 ) x1 Washer Display PWB ( E1 ) x1 ø3 x 8mm Turntable ( E2 ) x1 ø3 x10mm Disc Tray ( J1 ) x1 ø2 x 4mm ( E3 ) x2 ( E3 ) x1 Main PWB ( J2 ) x1 Figure 8-1 ( J1 ) x1 ø2 x 4mm CD Player Unit ( E3 ) x1 ( J2 ) x1 Figure 8-3 Front Panel ( K1 ) x4 ø2.6 x 5mm ( G1 ) x6 ø3x10mm (L1 ) x1 ø2.
CD-C422/C422C/C2800/C2800C CP-C422 STEP 1 REMOVAL Front Speaker CP-C422 PROCEDURE FIGURE 1. Net .......................... (A1) x1 2. Duct Panel ............. (A2) x1 3. Screw ..................... (A3) x4 9-1 ( A1 ) x1 ( A3 ) x4 ø3 x34mm Woofer ( A2 ) x1 Screwdriver Figure 9-1 CP-C2800 STEP 1 CP-C2800 REMOVAL PROCEDURE Front Speaker 1. Net .......................... 2. Duct Panel ............. 3. Screw ..................... 4. Screw .....................
CD-C422/C422C/C2800/C2800C REMOVING AND REINSTALLING THE MAIN PARTS CD MECHANISM SECTION Perform steps 1, 2, 3, 13 and 14 of the disassembly method to remove the CD mechanism. Loading Up / Down Motor How to remove the loading motor (See Fig. 10-1) Motor PWB 1. Remove the screws (A1) x 2 pcs., to remove the loading motor. ( A1 ) x2 ø2.6 x5mm Figure 10-1 How to remove the pickup (See Fig. 10-2) Stop Washer ( B1 ) x2 ( B3 ) x1 ø2.6 x6mm 1. Remove the screws (B1) x 2 pcs., to remove the shaft (B2). 2.
CD-C422/C422C/C2800/C2800C ADJUSTMENT • FM RF Signal generator: 1 kHz, 75 kHz dev., FM modulated MECHANISM SECTION • Driving Force Check Torque Meter Test Stage Frequency Frequency Display Specified Value Play: TW-2412 Tape 1: Over 80 g Tape 2: Over 80 g • Torque Check Torque Meter Specified Value Tape 1 Play: TW-2111 Tape 2 30 to 60 g. cm Fast forward: TW-2231 — 60 to 120 g.cm Rewind: TW-2231 — 60 to 120 g.cm Normal speed Adjusting Point Specified Value MTT-111 Volume in motor.
CD-C422/C422C/C2800/C2800C TEST MODE • Setting the test mode Any one of test mode can be set by pressing several keys as follows. + + TEST: CD operation test • TEST mode Function — CD test mode Setting of TEST mode Indication of CD TST mode (Fig. 12-1) IL is not performed. OPEN/CLOSE operation is manual operation. The pickup can be moved by using the ( LASER ON Tracking on the spot. SERVO OFF PLAY key input ) or ( ) key.
CD-C422/C422C/C2800/C2800C NOTES ON SCHEMATIC DIAGRAM • The indicated voltage in each section is the one measured by Digital Multimeter between such a section and the chassis with no signal given. 1. In the tuner section, ( ) indicates AM < > indicates FM stereo 2. In the main section, a tape is being played back. 3. In the deck section, a tape is being played back. ( ) indicates the record state. 4. In the power section, a tape is being played back. 5. In the CD section, the CD is stopped.
CD-C422/C422C/C2800/C2800C WAVEFORMS OF CD CIRCUIT STOP FOCUS 1 2 PLAY SERCH 5ms 0.50 V IC1 20 F.E 5ms 5.0 V IC1 54 DRF 0.5ms 10.0 V IC1 33 JP+ 7 0.5ms 10.0 V IC1 32 JP- 8 0.5ms 0.50 V IC1 14 JP 9 0.5ms 1.00 V IC1 7 TE 3 1 3 6 PLAY CUE 0.5ms 1.00 V IC 41 42 HF NORMAL DISC TN0=01 4 0.5ms 5.0 V IC 37 HFL 1 5 0.5ms 5.0 V IC 36 TES 3 3 0.5ms 1.00 V IC 41 42 HF 10 20ms 1.00 V IC1 27 SPO 11 20ms 2.00 V IC1 13 CLV+ 2 REVIEW PLAY TCD-712 (140mm) TN0=01 4 5 0.5ms 5.
– 15 – Figure 15 BLOCK DIAGRAM (1/3) M M PICKUP IN SW4 M1 SPIN MOTOR M2 SLIDE MOTOR TRACKING COIL FOCUS COIL 24 25 30 31 12 13 6 7 1 2 3 4 22 32 8 9 10 11 IC5 M56748FP DRIVER 5 26 27 28 29 34 35 36 20 30 31 54 SERVO AMP. 15 16 27 23 29 FIN2 FIN1 E F LA9241M IC1 64 VCC1 62 LD0 TO FD SPO SP SLD JP– 32 CV+ 40 SLC 43 SL1 44 ~ Q1 SL– SL+ DRF 20 JP– PU-IN SW +B1 SL+. SL–.
CD-C422/C422C/C2800/C2800C FM&AM LOOP ANT +B4 +B4 IC301 FM FRONT END TA7358AP T302 6 FM RF T301 FM OSC 20 13 FM DET MPX IN AM OSC IN 23 FM OSC OSC BUFF 7 22 17 15 VCO MO/ST DET OUT 24 Q301 21 6 5 AM IF GND VCC 3 AM MIX L 9 R 10 FM/AM 16 11 FM/AM SWITCHING STEREO L312 FM DET 1 FM/AM IF MPX.
CD-C422/C422C/C2800/C2800C +B2 UNSWITCH +B1 FL701 DISPLAY 3 ~ MEMORY BACK UP 30 31 32 33 TO CD SECTION TO CD SECTION TAPE BIAS TAPE REC T1/T2 CD DSP WRQ CD DSP RWC CD DSP CQCK CD DSP COIN CD DSP SQOUT RESET CD DSP RES CD T/T OPEN/CLOSE Q701 9 10 FM/AM ITCHING FM Q381 7 8 6 9 10 11 12 13 14 15 16 17 18 19 20 TO POWER SECTION +B5 PHM1 21 22 23 24 ~ ~ 25 1 27 80 79 29 IC701 IX0191AW SYSTEM CONTROL MICROCOMPUTER ~ 77 72 71 70 30 VDD +B2 AVDD AVREF 34 35 XL702 4.
CD-C422/C422C/C2800/C2800C CNS902 JK961 HEADPHONES 5 CNS901 R567 E C B T381 R384 R512 Q512 Q565 R514 R584 R511 R513 C534 R536 C520 R520 R519 R501 R535 C519 R537 C501 R539 C533 C502 R531 R533 Q513 R540 R538 R534 R532 C540 C532 C539 C531 C503 C543 R551 C43 R78 C56 C54 C31 R35 C32 R34 C51 R82 C52 C67 C55 L1 R86 R88 C53 R87 C57 R38 C34 R41 3 2 1 R32 R33 R27 R61 R96 C19 R25 C18 R30 C20 C44 C17 R19 C15 R31 C11 C12 C94 36 35 R17 C14 R13 R11 C9 Q91
Q571 C570 R570 C572 D702 D701 D703 R710 CNS704 R782 1 2 3 R802 R759 R798 Q704 3 2 1 R786 B C E 1 2 3 R707 R781 R723 D704 R806 R784 L701 SW705 REC PAUSE DEMO R780 C702 C714 R716 R717 R724 R725 SW708 PLAY R726 R730 R731 R727 R732 C701 R715 R702 11 C715 CNS701 R766 R771 R770 R769 R768 R767 R788 CNS701 E C B C716 2 R746 D708 3 2 1 CNP10 MELF SW719 VIDEO/AUX SW718 TAPE (1 2) SW717 TUNER (BAND) R747 8 R748 1 R749 CNS705 10 9 8 7 6 5 4 3 2 1 SW716 CD WH
CD-C422/C422C/C2800/C2800C POWER PWB-B F901: CANADA ONLY(CD-C422C/CD-C2800C) JUMPER: USA ONLY(CD-C422/CD-C2800) A PT901 POWER TRANSFORMER D905 A R906 R907 R901 R903 ZD902 C901 D911 TF901 R902 Q901 E C B C905 D910 C910 ZD901 C C909 D907 C902 7 D906 D908 1 C906 RD WH BK WH BK WH BK C903 CNS901 1 2 3 4 5 6 7 C904 CNS901 TO MAIN PWB P18 5-B CNP901 D909 B F901 C907 C908 D902 D904 D903 D901 S0901 AC POWER INPUT SOCKET AC 120V/60Hz R905 R904 TO DISPLAY PWB CNSM1 D SW
CD-C422/C422C/C2800/C2800C WB-B PICKUP UNIT(306) AC POWER CORD AC INPUT CNS1A TO MAIN PWB P18 4-H CNP1 1 2 3 4 5 TO MAIN PWB P18 6-H CNP2 1 2 3 4 5 6 7 8 0901 OWER SOCKET 0V/60Hz CNS1B BK WH PK YL BL BL PK WH YL BK GY 1 2 3 4 5 RD WH GY WH GY WH GY WH 1 2 3 4 5 6 7 8 CNS2A CNS2B CNS5 SW2 MECHA UP R 2 1 SENSOR PWB-D SW1 OPEN/CLOSE M3 T/T UP/DOWN LOADING CNS10 OR BR WH GY WH GY WH GY WH RD 1 - SOLENOID SOLM2 BIM5 TO MAIN PWB P18 7-H CNP10 10 9 8 7 6 5 4 3 2 1 SW3 DISC NUMBER 2 1
CD-C422/C422C/C2800/C2800C A F F 9G 4G 3G 2G 1G P17 P18 P19 P12 P1 8G P2 P3 7G 6G P4 P5 5G P6 P7 P8 P9 NC NC 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 NC P10 P11 P14 P20 P13 3 4 5 6 7 8 9 NC 1 2 P16 P15 F F FL701 DISPLAY Q701 KRC107 M B 2 3 1 R724 1K R725 1K R726 1K R727 1K R728 1K R729 1K R730 1K R731 1K R732 1K R733 1K R734 1K +B 9G L-CH INPUT T2 RUN PLSE AVSS CD UP/DOWN,DISC NO CD T.
CD-C422/C422C/C2800/C2800C R715 10K R716 10K R717 3.3K DISPLAY PWB-A2 C701 0.022 R702 10K R710 1K R741 8.2K R743 1K L-CH INPUT R-CH INPUT R750 1K R751 1K KEY-1 R752 1K 27 SET UP R753 1K R748 5.6K R747 3.9K R749 12K SW714 SW717 SW718 SW719 SW712 SW713 TIMER SW715 SW716 TUNER TAPE VIDEO POWER CLOCK /SLEEP MEMORY CD /AUX /BAND KEY-3 KEY-2 R704 1.
CD-C422/C422C/C2800/C2800C R1 1K R42 560 TR– TR+ FO+ FO– GND F PD VR LD TR+ FO+ FO– GND PD VR LD 6 5 4 3 2 1 6 5 4 3 2 1 HFL + TES SL+ JP– JP+ HF R35 C31 470 0.0027 39 38 37 36 35 34 33 6 7 R30 15K R27 220K R26 220K R25 R24 1.2K 10K C20 0.0033 C18 1/50 C19 47/16 4 40 SLD 29 30 31 32 12 C16 0.001 R22 6.8K SL– SLEO REF 27 28 C17 0.47/50 R20 10K R21 56K SPO SP– + TGL – R32 56K 41 C53 220P SLOF SLOF + FSTA – – SPG REF SPI SP FE– AGND C15 0.0047 R14 10K C30 2.
CD-C422/C422C/C2800/C2800C MAIN PWB-A1(1/4) +B R45 1K CD SIGNAL R46 1K +B 4.7/25 IC2 LC78623D SERVO/SIGNAL CONTROL C56 100P C57 100P R60 1K C55 100P C22 0.01 C54 100P R47 1K +B 11 12 PW SFSY FSX SBCK RWC WRQ COIN SQOUT /RES CLV+ C92 0.022 R76 270 R75 270 CD_L 15 16 17 C43 100/10 34 TEST4 33 DIGITAL OUT PCK EXTERNAL OUTPUT JP_ JP+ TGL C69 220P GND A_GND R73 2.
CD-C422/C422C/C2800/C2800C C403 0.047 (ML) C418 100P C422 0.33/50 (ML) IC401 LC75394E AUDIO PROCESSOR 16 15 14 13 12 11 10 C401 0.047 (ML) R401 1K TAPE_L TAPE_R R411 R413 C411 39K 1.
CD-C422/C422C/C2800/C2800C 420 00K C453 0.022 C452 1/50 D401 1SS133 C450 100/16 +B +12V(AUDIO) C451 1/50 R432 4.7K MAIN_R A_GND MAIN_L C454 2.2/50 5 3 2 TO MAIN PWB(3/4) P28 1-E TO MAIN PWB(3/4) P28 1-B 1 R431 4.7K R421 00K GND C456 0.022 C455 2.2/50 REC_L UT_L EC_R TUN_R R577 100K 8 K TUN_L TAPE_L +12V(AUDIO) A_GND D_GND D_GND R559 10K R565 1K GND(MOTOR) 11 18 TO MAIN PWB(1/4) P25 12-E 19 TO MAIN PWB(1/4) P25 9-H 2 R563 470 R566 4.7K Q565 KRC104 M R567 4.
CD-C422/C422C/C2800/C2800C MAIN PWB-A1(3/4) A – + IC961 LA4450 POWER AMP. C970 47/50 C967 100/50 R97 27 (1/2W R968 220 C973 100/50 CNS702 TO DISPLAY PWB 2 P22 1-F C974 0.022 +12V (MECHA) +12V DRIVER TO MAIN PWB(2/4) 5 P27 12-B +12V AUDIO Q941 2SD2012 Y IC941 KIA7812P VOLTAGE REGULATOR C941 0.022 R941 10K TO MAIN PWB(1/4) 4 P25 12-E 3 1 E C949 2200/50 D C966 100/50 C965 100/50 C R973 270 (1/2W) 2 C947 0.1 (ML) C944 0.
CD-C422/C422C/C2800/C2800C HEADPHONE PWB-A4 5 CNS902 5 JK961 HEADPHONES R982 330 (1/2W) R981 330 (1/2W) C979 0.047 (ML) R971 4.7 SO961 SPEAKER TERMINAL + – – + L-CH TO FRONT SPEAKER MIN 5.4 OHMS R-CH + – – + C992 22/50 C991 22/50 L-CH R-CH F901: CD-C422C/ CD-C2800C ONLY +B GND GND +B VF1 –VP VF2 1 2 3 4 5 6 7 D902 RL203F (AUDIO) PT901 POWER TRANSFORMER C907 0.1 (ML) (PWR) (PWR) TO REAR PEAKER MIN 16 OHMS 1 D901 RL203F (AUDIO) C908 0.
1 2 3 C301 82P D301 1SS133 C319 0.001 AM SIGNAL C309 0.001 C315 0.0047 R314 22 C330 10/16 C305 4.7P C306 0.022 FM IF T302 1 AM BAND COVERAGE fL T333 R340 100K AM TRACKING fL VD331 SVC321C2-1 T331 AM OSC 2 C318 100P R322 680 R312 47 Q301 KTC3194 Y AM ANT C307 10/16 VD332 SVC321C2-1 C334 0.022 3 FM BAND COVERAGE fL VD302 SVC211C T301 R309 10K R301 10 R323 47K C310 15P (CH) C311 18P C302 6.8P L312 FM RF R311 100K C316 0.022 R313 33K C304 0.01 C336 470P R342 100K R341 4.
CD-C422/C422C/C2800/C2800C IC1 PIN NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 VOLTAGE 2V 2V 2.1V 2.1V 2V 2V 2V 2V 2V 2V 2V 2V 2V 2V 2V 2V 2V 2V 2V 2V 2V 0V 2V 2V 2V 2V 2V 2V 2V 1.8V 1.8V 0V 0V 4V 4V 0V 0V 4V 0V 0V 0.3V 2V 2.1V 2.1V 0V 2V 2V 0V 0V 2V 4V 4V 0V 4V 4V 4V 2.1V 2.1V 0V 0V 2V 3.4V 0V 4V IC5 IC2 PIN NO.
CD-C422/C422C/C2800/C2800C TROUBLESHOOTING (CD SECTION) When the CD does not function When the CD section does not operate When the objective lens of the optical pickup is dirty,this section may not operate.Clean the objective lens,and check the playback operation.When this section does not operate even after the above step is taken,check the following items. Remove the cabinet and follow the troubleshooting instructions.
CD-C422/C422C/C2800/C2800C • When the CD tray fails to open or close. Is there following voltage input in specific state of IC701 pin 19? Open state: 0V Close state: 0V Intermediate state between open state and close state: 4.3V Check the OPEN CLOSE SW and the wiring from the IC701 pin 19 to the OPEN CLOSE SW. No Yes Is H output to IC2 pin 24 or 25 for 7 seconds when the OPEN/ CLOSE key is pressed?IC91 is defective. Replace it. Check the wiring of the IC2 pins 24 and 25, IC91 pins 1 and 3.
CD-C422/C422C/C2800/C2800C • Playback can only be performed when a disc is loaded. Is the Focus servo active? (Can you hear it working?) No Check the laser diode driver. Check the area around IC1(16) - (21) (focus servo circuit). No If the disc is not turning, the DRF should not change to "H". Yes Yes Does the DRF signal change from "L" to "H"? Check the spin system. Yes Yes No Is HF waveform normal (see the Fig.34-1, 2)? Check the periphery of IC1 pins 41 and 42. Level is abnormal.
CD-C422/C422C/C2800/C2800C • Checking the spin system. Play operation is performed without disc. Yes Yes The turntable rotates a little. The spin driver circuit is normal. No Yes The turntable fails to rotate or rotates at high speed. Check the periphery of IC1 pins 23 to 27, pin 39, and pin 40, IC2 pin 12 and pin 13, IC5 to CNP3. • Checking the VCO-PLL system Play operation is performed when disc exits. Yes Although HF waveform is normal, TOC data cannot be read. Yes Check PDO waveform (Fig. 35).
CD-C422/C422C/C2800/C2800C FUNCTION TABLE OF IC IC2 VHiLC78623D-1:Servo/Signal Control(LC78623D) (1/2) Pin No. Terminal Name Input/Output 1 DEFI 2 TAI 3 PDO Output 4 VVSS — 5 ISET Input 6 VVDD — Power terminal for integrated VCO. 7 FR Input VCO frequency range adjustment. 8 VSS 9 EFMO Output 10 EFMIN Input 11 TEST2 Input 12 CLV+ Outout Output for disk motor control. 3 values can be output with the commands. 13 CLV- Output Output for disk motor control.
CD-C422/C422C/C2800/C2800C IC2 VHiLC78623D-1:Servo/Signal Control(LC78623D) (2/2) Pin No. Terminal Name Input/Output 49* PW Output Output terminal of subcodes P, A, R, S, T, U and W. 50* SFSY Output Output terminal of synchronous signal of subcode frame. It drops when subcode stands by. 51 SBCK 52* FSX Output Output terminal of synchronous signal of 7.35kHz divided from quartz oscillation. 53 WRQ Output Output terminal to stand by output of subcode Q.
CD-C422/C422C/C2800/C2800C IC1 VHiLA9241M/-1:Servo Amp.(LA9241M) (1/2) Pin No. Function Port Name 1 FIN2 Connection pin for photodiode of pickup. RF signal is generated through addition with FIN pin, and FE signal is generated through subtraction. 2 FIN1 Connection pin for photodiode of pickup. 3 E Connection pin for photodiode of pickup. TE signal is generated through subtraction with F pin. 4 F Connection pin for photodiode of pickup. 5 TB Pin for input of DC component of TE signal.
CD-C422/C422C/C2800/C2800C IC1 VHiLA9241M/-1:Servo Amp.(LA9241M) (2/2) Function Port Name Pin No. 51 CL Micro computer command clock input pin. 52 DAT Micro computer command data input pin. 53 CE Micro computer command chip enable input pin. 54 DRF (DETECT RF) RF level detection output. 55 FSS (Focus Serch Select) Pin to switch focus search mode. (± search/+ search for reference voltage) 56 VCC2 VCC pin for servo system and digital system.
CD-C422/C422C/C2800/C2800C IC701 RH-iX0191AWZZ:System Microcomputer (IX0191AW) (1/2) Pin No. Port Name Terminal Name 1-7 FIP6-0 FL DRIVER 8 VDD VDD Input/Output Output — Function Segment Output Connect with BACK UP VDD 9 P27 TAPE BIAS Output TAPE BIAS ON: H 10 P26 TAPE REC Output TAPE REC.
CD-C422/C422C/C2800/C2800C IC701 RH-iX0191AWZZ:System Microcomputer (IX0191AW) (2/2) Pin No.
CD-C422/C422C/C2800/C2800C IC5 VHiM56748FP-1: Focus/Tracking/Spin/Slide Driver (M56748FP) 15K Vref-in Vref-in 1 Stand TSD by OP1 23K Vref-out 2 23K Vref-out Gain1 4 Vctl1(–) 5 VM1(–) 6 VM1(+) 7 5K Gain1 5K OP1 10K OP1 10K VM1(–) PA VM1(+) 10K PA Pre-driver 3 Standby 35 SS.
CD-C422/C422C/C2800/C2800C PARTS GUIDE MODEL CD-C422/C422C CP-C422, REAR SPEAKER SYSTEM, Constitute CD-C422/C422C. CD-C2800/C2800C CP-C2800, REAR SPEAKER SYSTEM, Constitute CD-C2800/C2800C. “HOW TO ORDER REPLACEMENT PARTS” To have your order filled promptly and correctly, please furnish the following information. 1. MODEL NUMBER 2. REF. No. 3. PART NO. 4. DESCRIPTION For U.S.A. only Contact your nearest SHARP Parts Distributor to order.
CD-C422/C422C/C2800/C2800C NO. PRICE RANK PART CODE DESCRIPTION INTEGRATED CIRCUITS IC1 IC2 IC5 VHILA9241M/-1 VHILC78623D-1 VHIM56748FP-1 J J J IC91 IC301 IC302 IC303 IC401 IC501 VHITA7291S/-1 VHITA7358AP-1 VHILC72131/-1 VHILA1805//-1 VHILC75394E-1 VHIAN7345K/-1 J J J J J J IC701 RH-IX0191AWZZ J IC941 IC942 IC961 VHIKIA7812P-1 VHIKIA7805P-1 VHILA4450//-1 J J J AS Servo Amp.
CD-C422/C422C/C2800/C2800C NO.
CD-C422/C422C/C2800/C2800C NO.
CD-C422/C422C/C2800/C2800C NO. PRICE RANK PART CODE DESCRIPTION NO.
CD-C422/C422C/C2800/C2800C NO.
CD-C422/C422C/C2800/C2800C CD-C422/C422C/ C2800/C2800C A 306-2 306 306-1 701 306-3 B 304 701 302 C 704 702 702 301 D 303 703 E M1 F 305 M2 305x2 G SW4 H PWB-E 1 2 3 4 Figure 6 CD MECHANISM EXPLODED VIEW – 67 – 5 6
CD-C422/C422C/C2800/C2800C CD-C422/C422C/ C2800/C2800C 603 A 615x4 212 213 603 612 603 B 611x2 613x3 217 PWB-A1 PWB-A2 C 614x2 PWB-A3 219 613x2 201 221 201-1 D 201-2 231 FL701 PWB-A4 223 220 616x2 258x2 (LUG962) 604 Silicon Grease 616x2 613x6 222 608 239 616 256 608 225 224 608 E 218 239 227 TAPE MECHANISM 610x4 203 (203-1,203-2, 203-3,203-4, 203-5,203-6, 203-7,203-8) PWB-B 257 For Canada Only F 210 608x2 603 211 G 612 215 214 228 243 216 204 244 H 1 2 3 4
CD-C422/C422C/C2800/C2800C CD-C422/C422C/ C2800/C2800C 232 617 A 202 202-3 202-2 612x2 618 202-1 206 B 254 238 SW3 253 C 253 240 253 207 612x2 D 209 208 205 602 242 CD MECHANISM E 233 253x2 615 607 247 608 226 605 245 234 248 236 249 253 605 249 246 601 252 251 F 235 237 SW2 233 255 250 606x2 G 253 229 608 230 M3 241 609x4 H PWB-E 253 1 2 3 4 Figure 8 CABINET EXPLODED VIEW (2/2) –– 89 –– SOLM2 5 6
CD-C422/C422C/C2800/C2800C CP-C422 SP3 (L-CH) SP4 (R-CH) A SP1 (L-CH) SP2 (R-CH) B 905 C 903 907 D SH AR P 902 E SP1,2 901 904x4 F SP3 (L-CH) SP4 (R-CH) 906 G 908 SP1 (L-CH) SP2 (R-CH) H 1 2 3 4 Figure 9 SPEAKER EXPLODED VIEW (1/3) –– 10 9 –– 5 6
CD-C422/C422C/C2800/C2800C CP-C2800 905 SP3,4 A 904x4 903 B 902 904x4 C 901 SP1,2 D E 906 907 TWEETER SP3 (L-CH) SP4 (R-CH) RED F SUPER TWEETER SP5 (L-CH) SP6 (R-CH) G SUPER TWEETER SP5 (L-CH) SP6 (R-CH) YELLOW BLACK Capacitor TWEETER SP3 (L-CH) SP4 (R-CH) RED BLACK Capacitor WOOFER SP1 (L-CH) SP2 (R-CH) WOOFER SP1 (L-CH) SP2 (R-CH) H 1 2 3 4 Figure 10 SPEAKER EXPLODED VIEW (2/3) – 10 11 – 5 6
CD-C422/C422C/C2800/C2800C REAR SPEAKER SYSTEM A 902 B SP1,2 C D 901 E F 903 904x3 G 904x3 H 1 2 3 4 Figure 11 SPEAKER EXPLODED VIEW (3/3) – 11 12 – 5 6
CD-C422/C422C/C2800/C2800C PACKING OFF THE SET (For U.S.A. Only) Setting position of switches and knobs Tape Mechanism STOP CD-C422/CD-C2800 Unit SPAKP0013AWZZ1 Polyethylene Bag Rear Speaker(L/R) SPAKA0197AWZZ Packing Add.,(Left/Right) 92L411-0063 Polyethylene Bag T P O FR ON T SPAKZ0383AWZZ Sheet O B T T M O 92L412-0064 Packing Add.
CD-C422/C422C/C2800/C2800C COPYRIGHT © 1998 BY SHARP CORPORATION ALL RIGHTS RESERVED. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of the publisher.