CD-BK147V CP-BK147 CD-BK147V 92L2390137W010 CD-BK147V Video CD Mini System consisting of CD-BK147V (main unit), CPBK147 (front speakers) and 92L2390137W010 (surround speakers). VIDEO CD MINI SYSTEM MODEL CD-BK147V OPERATION MANUAL NTSC/PAL CD-BK147V(FRONT) ENGLISH 1 01.9.28, 10:25 Please refer to pages E-1 to E-35.
ENGLISH CD-BK147V Introduction Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. Contents Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Special notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Listening to a CD (CDs) . . . . . . . . .
CD-BK147V Accessories Please confirm that the following accessories are included. Remote control 1 "AA" size battery (UM/ SUM-3, R6, HP-7 or similar) 2 AM loop aerial 1 FM aerial 1 Video cable 1 AC power lead 1 Only the above accessories are included. - Accessories / Special notes - Important Instruction Note: Special notes Warning: CAUTION z When the ON/STAND-BY button is set at STAND-BY position, mains voltage is still present inside the unit.
Precautions CD-BK147V „ General „ Volume control z Please ensure that the equipment is positioned in a well-ventilated area and ensure that there is at least 10 cm (4") of free space along the sides, top and back of the unit. The sound level at a given volume setting depends on speaker efficiency, location, and various other factors.
CD-BK147V Controls and indicators 1 2 3 4 5 9 6 7 10 11 4 5 1 6 - Controls and indicators - General Information „ Display 8 2 7 3 8 10 11 12 13 14 15 9 16 20 17 21 18 22 19 23 24 25 26 27 28 29 E-4 ENGLISH 1. Disc Number Indicators 2. Timer Indicator 3. Tape 2 Record Indicator 4. Sleep Indicator 5. Extra Bass Indicator 6. Disc or Tuner Memory Indicator 7. FM Stereo Mode Indicator 8. FM Stereo Receiving Indicator 9. Disc Repeat Play Indicator 10. Disc or Tape Play Indicator 11.
CD-BK147V „ Rear panel Reference page „ Front speaker 1 2 3 4 5 1. Full-Range Speaker 2. Bass Reflex Duct 3. Speaker Wire 6 7 8 9 1 „ Surround speaker 2 1. Full-Range Speaker 2. Speaker Wire 2 - Controls and indicators - General Information 1. Video Output Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 2. AC Power Input Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7, 9 3. AC Voltage Selector . . . . . . . . . . . . . . . . . .
CD-BK147V Controls and indicators (continued) „ Remote control Reference page 1 3 - Controls and indicators - General Information 2 4 5 6 7 8 9 10 11 12 E-6 ENGLISH 13 14 15 16 17 18 19 20 21 22 23 24 25 26 1. Remote Control Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 2. Audio Mode Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 3. Video CD Auto/On Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CD-BK147V „ Aerial connection TV/monitor (See page 13.) Supplied FM aerial: Connect the FM aerial wire to the FM 75 OHMS terminal and position the FM aerial wire in the direction where the strongest signal can be received. Supplied AM loop aerial: Surround speaker (Right) AM loop aerial Surround speaker (Left) Connect the AM loop aerial wire to the AM LOOP socket. Position the AM loop aerial for optimum reception. Place the AM loop aerial on a shelf, etc.
CD-BK147V System connections (continued) „ Speaker connection „ Placing the speaker system Front speakers To enjoy the surround effect, we recommend that you place each speaker as shown to the below. Connect the black wire to the FRONT (-) terminal, and the red wire to the FRONT (+) terminal. Main unit Surround speakers Connect the black wire to the SURROUND (-) terminal, and the white wire to the SURROUND (+) terminal.
CD-BK147V „ To mount the surround speakers on the wall The design of the surround speakers allows them to be hung on the wall. Be sure to use the type and size of screw that is shown to the below. 9 mm (3/8") Drive one screw through the wall for each speaker. z Make sure that both the screw and the wall can support a load of 20 kg (45 lbs.). z Drive the screws, so there is about a 5 mm (3/16") space between the wall and the head of the screw.
CD-BK147V System connections (continued) Remote control „ Setting the FM/AM span selector „ Battery installation 1 Remove the battery cover. 2 Insert the supplied batteries according to the direction indicated in the battery compartment. When inserting or removing the batteries, push them towards the nals. battery termi- Preparation for Use - System connections / Remote control - 3 Replace the cover. Precautions for battery use: z Replace all old batteries with new ones at the same time.
General control CD-BK147V „ Extra bass (X-BASS)/Pre-programmed equaliser (Main unit operation) You can select the extra bass and pre-programmed equaliser modes with the same button on the main unit. Changing the mode: The first time the unit is plugged in, the unit will enter the demonstration mode. You will see words scroll.
CD-BK147V Setting the clock 4 Press the TUNING/TIME ( or ) button to adjust the hour and then press the MEMORY/SET button. z Press the TUNING/TIME ( or ) button once to advance the time by 1 hour. Hold it down to advance continuously. z When the 12-hour display is selected, "AM" will change automatically to "PM". Press the TUNING/TIME ( or ) button to adjust the minutes and then press the MEMORY/SET button. In this example, the clock is set for the 24-hour (0:00) display.
Any CD that contains motion pictures can be played. You can enjoy motion pictures with the sound quality of MDs and the picture quality of VHS tapes. Digital compression technology allows the continuous playback of up to 74 minutes from a 12 cm disc. With video CDs, you can select the items you want to watch from the on-screen menu. Discs which support "Playback control" can display still pictures. (See pages 15 - 16.) The disc symbols are found on the disc labels or jackets.
CD-BK147V Preparation for video CD playback (continued) „ Selecting the video output format „ To change the audio mode Video CD is recorded in PAL or NTSC format. Select the video output format (NTSC, PAL or PAL 60) according to your TV or VCR. Sound of the playback source can be switched among the STEREO, L-CH, and RCH modes. The audio mode function is used when the left and right channels have individual signals from each other.
Playback of a video CD (CDs) with P. B. C. (Version 2.0) 1 2 3 4 5 Turn on the TV and set the input selector to "VCR". Press the ON/STAND-BY button to turn the power on. Press the CD/VIDEO CD (CD) button. Press the OPEN/CLOSE button to open the disc tray. Place the video CD(s) with P.B.C. on the disc tray, label side up. When loading a third disc, press the DISC SKIP button to turn the disc tray, then place the video CD in the open position.
CD-BK147V Playback of a video CD (CDs) with P. B. C. (Version 2.0) (continued) Video CD Playback - Playback of a video CD (CDs) with P. B. C. (Version 2.0) - 9 Select the desired menu number using the direct search buttons on the remote control. „ To move the menu screen (menu screen with more than 1 page) z Playback will begin. To move to the next menu screen: z After playback has finished, the menu will reappear. Select the menu number you want to play.
Playback of a video CD (CDs) without P. B. C. (Version 1.1) 5 CD-BK147V Place the video CD(s) on the disc tray, label side up. When loading a third disc, press the DISC SKIP button to turn the disc tray, then place the video CD in the open position. Press the OPEN/CLOSE button to close the disc tray.
CD-BK147V Playback of a video CD (CDs) without P. B. C. (Version 1.1) (continued) „ To skip to the beginning of a track (skip search) To move to the beginning of the next track: Video CD Playback - Playback of a video CD (CDs) without P. B. C. (Version 1.1) - Press the / By using the direct search buttons, the desired tracks can be played. 1 Whilst in the stop mode, press the Selected disc number DISC SKIP button to select the desired disc.
Programmed play Press the direct search buttons on the remote control to select the desired track. You can also select a track by pressing the (NEXT ) button. 3 Selected track number / ( PREV.) or / Press the MEMORY/SET (MEMORY) button to save the track number. Playback order When the track is memorised, "MEMORY" will appear. 4 Repeat steps 1 - 3 for other tracks. Up to 32 tracks can be programmed. If you make a mistake, the programmed tracks can be cleared by pressing the CLEAR button.
CD-BK147V Repeat or random play Time search selection „ Repeat play You can play back from the desired scene by specifying the time. 1 To repeat all tracks on up to 3 discs: Press the / ( /SELECT/RESUME) button twice. Whilst in the stop or playback mode, hold down the DIGEST (DIGEST/TIME SEARCH) button to enter the time search mode. T I ME SEARCH TNO 01 --:-- - Repeat or random play / Time search selection - Advanced Video CD (Version 1.
Digest selection of discs and tracks CD-BK147V / (NEXT ) button will display the next 9 tracks. PREV.) button to return to the previous display. To cancel the disc digest: Press the ( /RETURN) button. Notes: z The disc digest function is available only in the stop mode. z This function is not available with an audio CD. „ Track digest selection Each track is divided into 9 sections. You can look at the sections and select the scene you want to start watching from.
CD-BK147V Bookmark function „ To recall a bookmarked scene 1 Whilst in the stop or playback mode, hold down the BOOKMARK button on the remote control for more than 1 second. The marked scenes and numbers will be displayed on the TV screen. After displaying every scene, this unit will enter the pause mode automatically. 2 Press the direct search buttons on the remote control to select the scene you want to play back. z Playback will begin from the selected scene.
During the stop mode, hold down the button for more than 1 second. / ( /SELECT/RESUME) You can check the operation of the main unit by the on-screen display. Playback will begin at the point where playback has stopped. Notes: z You can perform the resume play even if the unit is set to the stand-by mode or the function is changed from CD/VIDEO CD (CD) to another. z Resume play cannot be performed in the P.B.C. mode.
CD-BK147V Listening to a CD (CDs) 1 2 3 4 Press the ON/STAND-BY button to turn the power on. Press the CD/VIDEO CD (CD) button. Press the OPEN/CLOSE button to open the disc tray. Place the CD(s) on the disc tray, label side up. When loading a third disc, press the DISC SKIP button to turn the disc tray, then place the CD in the open position. z CDs can be placed on any open position on the disc tray. z Be sure to place 8 cm (3") CD(s) in the middle of the disc positions.
CD-BK147V „ To locate the beginning of a track /SELECT/RESUME button. To stop playback: Press the To move to the beginning of the next track: Press the / ( /RETURN) button. To remove the CDs: Whilst in the stop mode, press the OPEN/CLOSE button. The disc tray will open. Remove the two discs. Then, press the DISC SKIP button to rotate the disc tray and remove the remaining disc. To restart the track being played: Press the After use: Press the ON/STAND-BY button to enter the power stand-by mode.
CD-BK147V Listening to the radio 1 2 Press the ON/STAND-BY button to turn the power on. 3 Press the TUNING/TIME ( station. Manual tuning: Press the TUNER (BAND) button repeatedly to select the desired frequency band (FM or AM). or ) button to tune in to the desired Press the TUNING/TIME button as many times as required to tune in to the desired station. Auto tuning: Radio - Listening to the radio - When the TUNING/TIME button is pressed for more than 0.
Listening to the memorised station „ To recall a memorised station „ Memorising a station You can store 40 AM and FM stations in memory and recall them at the push of a button. (Preset tuning) Press the PRESET ( the desired station. or ) button for less than 0.5 seconds to select Perform steps 1 - 3 in "Listening to the radio" on page 26. Press the MEMORY/SET button to enter the preset tuning saving mode.
CD-BK147V Listening to a cassette tape (TAPE 1 or TAPE 2) Tape Playback - Listening to a cassette tape (TAPE 1 or TAPE 2) - Before playback: z For playback, use normal or low-noise tapes for the best sound. (Metal or CrO tapes are not recommended.) z Do not use C-120 tapes or poor-quality tapes, as they may cause malfunctions. z Before loading a tape into the cassette compartment, tighten the slack with a pen or a pencil. Playback is possible in TAPE 1 compartment as well as in TAPE 2.
Playing karaoke 1 Set the MIC LEVEL control to MIN to protect the speakers from shock noise and to avoid disturbing noises. 2 Connect the microphone to the MIC socket. z Use a microphone with a 6.3 mm (1/4") plug, an impedance of 600 ohms. z Use a standard plug adaptor when using a microphone with a 3.5 mm (1/8") diameter plug. 3 4 Press the ON/STAND-BY button to turn the power on. Press the CD/VIDEO CD or TAPE (1 source and play it.
CD-BK147V Recording to a cassette tape Before recording: z When recording important selections, make a preliminary test to ensure that the desired material is properly recorded. z SHARP is not liable for damage or loss of your recording arising from malfunction of this unit. z The volume and sound controls can be adjusted with no effect on the recorded signal (Variable Sound Monitor). z For recording, use only normal tapes. Do not use metal or CrO tapes.
CD-BK147V „ Dubbing from tape to tape „ Recording from the radio You can record from TAPE 1 to TAPE 2. For recording, use only normal tapes. Do not use metal or CrO tapes. Tune in to the desired station. (See page 26.) Load a cassette into the TAPE 2 cassette compartment with the side to be recorded on facing you. Wind past the leader of the tape, on which recording cannot be performed. Press the REC PAUSE (TAPE)] button. [ Load a prerecorded cassette into the TAPE 1 cassette compartment.
CD-BK147V Timer and sleep operation Timer playback: The unit turns on and plays the desired source (video CD, CD, tuner, tape) at the preset time. Timer recording: „ Timer playback or timer recording Before setting timer: 1 Press the CLOCK button to check that the clock is on time. 2 For timer playback: Load a cassette or discs to be played. For timer recording: Load a cassette for recording in the TAPE 2 cassette compartment.
CD-BK147V 5 Press the TUNING/TIME ( or ) button to specify the hour to start, then press the MEMORY/SET button. „ Sleep operation 1 2 Play back the desired sound source. Press the TIMER/SLEEP button repeatedly until "SLEEP" is displayed. The illustrations show the timer playback setting. 6 Press the TUNING/TIME ( or ) button to specify the minutes, then press the MEMORY/SET button. or ) button.
CD-BK147V Troubleshooting Maintenance „ If trouble occurs „ Cleaning the tape-handling parts When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is operated incorrectly, it may malfunction. z Dirty heads, capstans or pinch rollers can cause poor sound and tape jams. Clean these parts with a cotton swab moistened with commercial head/pinch roller cleaner or isopropyl alcohol.
Specifications As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. „ General Dimensions Width: 270 mm (10-5/8") Height: 300 mm (11-4/5") Depth: 344 mm (13-1/2") Weight 6.2 kg (13.7 lbs.) MPO: 104 W (52 W + 52 W) (10 % T.H.D.
9906 92L2010147V020 B0111.HK 01/9/28 CD-BK147V(S)_BACK.