Let’s get started VX31 vax.com.au vax.co.
Let’s talk safety This vacuum cleaner is intended for household use only and NOT for commercial or industrial use. Basic safety precautions READ ALL THE INSTRUCTIONS BEFORE USING THIS APPLIANCE • It is a battery-operated appliance, the battery being charged outside the appliance. • Only use the vacuum cleaner indoors and keep the area you’re cleaning well lit. • Keep fingers, hair and loose clothing from moving parts and openings whilst using the vacuum cleaner.
ull un • Only Vax recommend tools and accessories should be used with this vacuum cleaner • Keep the charger and batteries in a dry place, and use them indoors only. • Do not use charger with damaged cord or plug. If appliance or charger is not working as it should, has been dropped, damaged, left outdoors or dropped into water, take it to a Vax authorised repair agent prior to continuing use. Please contact our Customer Care Line on: AU: 1300 361 505 / NZ: 0800 800 900 (Mon-Fri 8.30am to 5.
Thank you for buying this Air Cordless Lift. Taking care of your carpets and hard floors The Air Cordless Lift is designed to make vacuuming carpets and hard floors regularly, as effective and efficient as possible and this user guide will help you get the most out of your machine. Maintaining your carpets and hard floors will ensure they keep their appearance for longer. You’ve chosen the carpets and hard floors for your home for a reason and Vax will help you take good care of them.
Contents Let’s talk safety Getting to know your machine Air™ Cordless Lift Included with your machine 2x LithiumLife™ extended runtime batteries Getting started Battery charger Using your machine Taking care of your machine Let’s talk technical Notes Accessories and replacement parts What to do if it goes wrong Getting in touch 2-in-1 tool Articulating up-top tool
Getting to know your machine Handle Boost button Extension tube Main body release button Hose Brushbar On/Off button On/Off button Dirt container release button Pre-motor filter (hidden) Separator 2-in-1 tool Battery Brushbar Floorhead Technical Specification Name Air Cordless Lift Product code VX31 Battery 20V Weight 5.1kg Dirt container Capacity 1L Battery Specification Type Lithium-Ion rechargeable battery pack Nominal voltage 18VDC Capacity 4Ah/72Wh Battery Model No.
nz Getting started PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE CAUTION: The battery used in this device may present a risk of fire or chemical burn if mistreated. Do not disassemble or heat above manufacturer’s maximum temperature limit (60° C/140°F) or incinerate. Replace battery with Vax battery only. Use of another battery may present a risk of fire or explosion. Dispose of used battery promptly. Keep away from children. Do not disassemble and do not dispose of in fire.
Getting started Assembling your vacuum cleaner CAUTION: The motor is contained in the dirt container lid, always make sure the pre-motor filter is correctly fitted before using the vacuum cleaner. Loss of suction may be experienced if the filter insert is not removed before use. Press the dirt container release button. Pull and remove the dirt container off the vacuum cleaner. Lift the handle on the pre-motor filter assembly. Remove the filter assembly from dirt container.
Using your machine CAUTION: When the vacuum is reclined with the brushbar switched on, never leave the vacuum in one position for any long periods of time. The brushbar should be ON for carpets and OFF for hard floors. Press the On/Off button to switch the vacuum cleaner on. Place your foot on the base and pull the handle backwards to recline. Press the brushbar button to activate the brushbar. Stand the vacuum cleaner in the upright position to use the hose.
Using your machine Using the hose with the main body attached CAUTION: Constant use of the boost button will reduce the battery running time. Always switch off the vacuum cleaner before connecting or disconnecting any tools. Do not use the vacuum with base and main body attached to clean stairs. Remove the hose from the side of the vacuum cleaner by pressing the hose end clip and pulling hose out of the hose entry point. Press handle release clip and lift to remove handle.
Using your machine Using the hose with the main body detached CAUTION: When cleaning stairs to prevent the vacuum cleaner falling, always use with the main body detached from the base. Hold or place it securely on or at the bottom of the stairs during use. Do not place the vacuum cleaner on furniture. Remove the hose from the side of the vacuum cleaner by pressing the hose end clip and pulling hose out of the hose entry point. Press handle release clip and lift to remove handle.
Taking care of your machine Emptying and cleaning the dirt container TIP Press the dirt container release button. Pull and remove the dirt container off the vacuum cleaner. Hold the dirt container over a bin, press the dirt release button to open, allow the dirt to fall out. Don’t over fill the dirt container to avoid blocking the air flow through the vacuum cleaner and replace filter every 6 months depending of level of use. Damaged or discoloured filters need replacing.
Let’s talk technical Cleaning terminals Using a dry cloth or soft dusting brush remove any dust/debris from terminals on battery charger, battery and vacuum cleaner. Clearing a blockage from the brushbar IMPORTANT: If the brushbar has been obstructed, the Motor Protection Sensor may have been activated. Remove the battery and dirt container and clear any obstruction from the brushbar. Wait 30 minutes for the vacuum cleaner to reset itself. Replace the battery and dirt container.
Let’s talk technical Changing/replacing brushbar Standard brushbar (included with this machine) Multi-floor brushbar* Hard-floor brushbar* Remove battery and lie the vacuum cleaner flat. Squeeze the clips on the brushbar cover towards the brushbar and lift off brushbar cover. Choose brushbar. Remove brushbar firstly lifting the side of brushbar not connected to belt. Refit brushbar, fitting the belt to the brushbar first. Then aligning both sides of the brushbar into base.
Notes
Accessories and replacement parts Don’t forget your accessories! Order at: www.vax.com.au / www.vax.co.nz Pro Cleaning Kit Model no. VPCK Crevice tool For awkward gaps and crevices. Upholstery attachment Gently cleans large areas of upholstery, curtains, sofas and chairs. Pet hair removal attachment Tackles stubborn pet hair on furniture, rugs and carpets. Stubborn dust brush attachment Removes built up dust from skirting, banisters and corners.
Accessories and replacement parts Don’t forget your accessories! Order at: www.vax.com.au / www.vax.co.nz Battery Charger Model no. BH03200ANZ LithiumLife Extended Runtime Battery Model no. BH03120ANZ LithiumLife battery technology brings power and cordless convenience for whole-home cleaning. Filter Model no.
What to do if it goes wrong Problem Why does my vacuum cleaner have no power? Solution • Check the battery is inserted correctly into the vacuum cleaner. • The battery may not be charged, remove and charge battery. • Battery might be too hot, remove and allow to cool for 30 minutes. Replace battery. • The motor thermostat may have tripped. If this has happened, switch off the vacuum cleaner. Remove and empty the dirt container and check for blockages.
Getting in touch * Calls are charged at the standard local rate. Please make a note of the serial number and model number of the vacuum cleaner before calling.
Distributed by Techtronic Industries Australia Pty. Ltd. 31 Gilby Road, Mt Waverley, VIC 3149 Australia. Careline AU: 1300 361 505 www.vax.com.au Careline NZ: 0800 800 900 www.vax.co.nz © 2014 All rights reserved. VAX®, VAX Lozenge, Air Cordless are trade marks or registered trade marks of Techtronic Floor Care Technology Ltd.