OPERATION MANUAL (for network scanner) LASER PRINTER
INTRODUCTION The optional Network Scanner Expansion Kit (AR-NS3) enables the machine to be used as a network scanner. This manual explains only the network scanner functions of the product. For detailed information on the software in the CD-ROM that accompanied the AR-NS3, please view the user's guide (PDF format) that is included on the CD-ROM.
TABLE OF CONTENTS Page Page INTRODUCTION................................................................. 1 ABOUT THE NETWORK SCANNER FUNCTION .............. 3 SETTINGS AND PROGRAMMING REQUIRED FOR THE NETWORK SCANNER FEATURE...................................... 4 ACCESSING WEB PAGES ........................................... 4 ABOUT THE WEB PAGE .............................................. 4 SETTING UP DESTINATION INFORMATION.............. 5 STORING SENDER INFORMATION (Scan to E-mail)............
ABOUT THE NETWORK SCANNER FUNCTION The AR-NS3 Network Scanner Expansion Kit adds network scanner functionality to your machine. A machine with the network scanner functionality can scan a paper document, photograph, or other printed information into a data file, and send the file to a file server or personal computer over a corporate network (intranet) or the Internet. You can select from the following transmission methods, depending on where you wish to send the scanned image data.
SETTINGS AND PROGRAMMING REQUIRED FOR THE NETWORK SCANNER FEATURE To use the Network Scanner feature, settings for the SMTP server, DNS server, and destination addresses must be established. To establish the settings, use a computer that is connected to the same network as the machine to access the machine's Web page. The Web page can be displayed with your Web browser (Internet Explorer 5.5 or later (Windows)/5.1 or later (Macintosh), or Netscape Navigator 6.0 or later).
SETTINGS AND PROGRAMMING REQUIRED FOR THE NETWORK SCANNER FEATURE SETTING UP DESTINATION INFORMATION Click "Destination" in the Web page menu frame to display the Destination Management screen. If you are prompted to enter the password, enter it to display the screen. This screen allows you to store the name and address of a destination in a one-touch key. The Destination Management screen can also be used to edit or clear stored destinations.
SETTINGS AND PROGRAMMING REQUIRED FOR THE NETWORK SCANNER FEATURE Storing Groups If you are using Scan to E-mail or Internet-Fax transmission, a scanned image can be sent to multiple destinations in a single operation. To use this function, you must first store the destinations in a group. Click "Group" and then select the destinations that you wish to store in the group. Up to 500*1 (300*2) destinations can be stored in total.
SETTINGS AND PROGRAMMING REQUIRED FOR THE NETWORK SCANNER FEATURE SETTINGS FOR NETWORK SCANNING The administrator must configure the following settings. First, click “Admin Mode” in the menu frame to display the administrator screen. Then configure each setting item. Menu frame Click the menu items displayed here to configure the corresponding settings. Network Scanning Configure basic settings for the network scanner function. i-Fax Configure Internet-Fax transmission and reception settings.
SETTINGS AND PROGRAMMING REQUIRED FOR THE NETWORK SCANNER FEATURE Change custom index name screen This screen is displayed when you click "Custom Index" in the network scanning setup screen. Programmed destinations appear as one-touch keys in the Address book screen of the touch panel, and are normally included in the ABC index. Two types of indexes are available: the ABC index and group indexes (custom directories). Group indexes allow you to assign any index name to the destination for easy searching.
CONDITION SETTINGS SCREEN OF SCANNER MODE The condition settings screen of scanner mode is displayed by pressing the [IMAGE SEND] key (refer to page 1-12 of "Operation manual (for general information and copier operation)") while the document filing mode*1 (print mode*2), copy mode, or job status screen appears in the touch panel*3. In the explanations that follow, it is assumed that the initial screen that appears after pressing the [IMAGE SEND] key is the condition setting screen (shown below).
CONDITION SETTINGS SCREEN OF SCANNER MODE [ORIGINAL] key (pages 19 - 22) Touch this key when you wish to manually set the size of the original to be scanned or scan both sides of the original (if a B/W scanner module/ DSPF is installed). [FILE FORMAT] key (page 24) Touch this key to set the file format of scan images that you transmit. The selected file format setting will be highlighted above the key. The initial factory setting is "PDF MMR(G4)".
CONDITION SETTINGS SCREEN OF SCANNER MODE [GLOBAL ADDRESS SEARCH] key (page 17) select multiple destinations before touching this key. [BCC] key (page 14) This key is displayed only if “ENABLE BCC” of the key operator program, "BCC Setting", is set. If you wish to send a "BCC" ("Blind Carbon Copy") of a Scan to E-mail transmission to other recipients in addition to the main recipient, after selecting destinations using one-touch keys or the global address search function, touch this key.
SENDING AN IMAGE BASIC TRANSMISSION METHOD sure 1 Make mode. needed, adjust the resolution setting. 4 If(Refer to page 23.) the machine is in scanner EXPOSURE 300x300dpi RESOLUTION PDF MMR(G4) FILE FORMAT AUTO 8½ X11 ORIGINAL When the [IMAGE SEND] key light is on, the machine is in scanner mode. If the light is not on, press the [IMAGE SEND] key. Depending on the feature to be used, touch the [MODE SWITCH] key to select the E-MAIL/ FTP mode or the INTERNET-FAX mode.
SENDING AN IMAGE 8 Touch the [SUBJECT] key. correct key. The highlighting will move to the new key. To enter the file name directly, touch the [DIRECT ENTRY] key and enter the file name. The selected or entered file name will be the name of the file attached to the e-mail. The subject selection screen appears. The list of subjects that were registered on the Web FILE NAME page is displayed. SENDER NAME For Scan to FTP and ADD THE SEND Scan to Desktop, the subject cannot be set. Proceed to step 11.
SENDING AN IMAGE 16 Touch the [OK] key. NOTES Refer to pages 5 to 6 for information on programming one-touch key destinations. When touching a one-touch key, corresponding information from the email destination screen is shown in the message display. Up to 35 characters can be displayed in the message screen, regardless of the number of characters that have been entered.
SENDING AN IMAGE you have another page to scan, change 24 Ifpages and then press the [START] key. Using the automatic document feeder 23 Press the [START] key. Repeat this sequence until all pages have been scanned. You can change the resolution and exposure settings as needed for each page (refer to page 23). If no action is taken for one minute, scanning automatically ends and the transmission job is stored. Scanning begins and the transmission job is stored.
SENDING AN IMAGE DESTINATION INPUT METHODS In the section of "BASIC TRANSMISSION METHOD", a destination is specified with a one-touch key (steps 18 to 20). This machine, however, provides the following destination input methods. Manual entry: Enter the e-mail address directly. (only for Scan to E-mail and Internet-Fax transmission) (Quick) key: After touching the key, enter the three-digit number that was assigned when the address was registered.
SENDING AN IMAGE Address entry with 1 Touch the 2 Touch the desired LDAP server key. (Quick) key key. SERVER CHANGE OK CANCEL Document division 1 1/2 Document division 2 E-MAIL/FTP MODE SWITCH A1210 project team Software development center To search the highlighted server, proceed to step 3. 3 Touch the [OK] key. 2 Enter the three-digit assigned number. When a three-digit number is entered, the relevant address will be set as a destination address.
SENDING AN IMAGE 6 Touch the desired destination key. Touch the [OK] key to return to the initial screen. NOTE When you perform a broadcast transmission, the compression mode set with the key operator program, "Compression mode at broadcasting" (page 56), is used as the file compression mode for all destinations.The default setting is "MMR (G4)". To display the remaining destinations, touch the tanaka a tana [ ] key.
SENDING AN IMAGE SCANNING AND TRANSMITTING A TWO-SIDED ORIGINAL (when using B/W scanner module/DSPF) If a B/W scanner module/DSPF is installed, a two-sided original can be automatically scanned and transmitted using the automatic document feeder. Follow the steps below. sure the machine is in scanner mode 1 Make and then load the document in the 4 Touch the [OK] key. automatic document feeder. RESEND 2 Touch the [ORIGINAL] key.
SCANNING SETTINGS (ORIGINAL SIZE, EXPOSURE, RESOLUTION, AND FILE FORMAT) When sending an image, you can adjust the original size, exposure, resolution, and file format settings as needed. MANUALLY SETTING THE SCANNING SIZE If you load an original that is not a standard size (such as an AB size), or if you wish to change the scanning size, touch the [ORIGINAL] key and set the original size manually.
SCANNING SETTINGS (ORIGINAL SIZE, EXPOSURE, RESOLUTION, AND FILE FORMAT) 4 Touch the [OK] key. selected size appears in the top half of 6 The the [ORIGINAL] key. The specified original size is displayed as the scan size. 812 X13 OK 812X14 AB 11X17 INCH 300x300dpi RESOLUTION PDF MMR(G4) FILE FORMAT 8½ X11 ORIGINAL 5 Touch the [OK] key. 00% SEND SIZE AUTO NOTE You can return to automatic detection by pressing the [CA] key. You will return to the initial screen.
SCANNING SETTINGS (ORIGINAL SIZE, EXPOSURE, RESOLUTION, AND FILE FORMAT) the X (width) and Y (length) dimensions 6 Enter of the original with the keys. 9 To exit, touch the [ORIGINAL] key. X (width) is initially selected. A Y Enter X and then touch (2 1/2 17) 17 inch X the ( ) key to enter Y. (2 1/2 11 5/8) A width of 2-1/2" to 17" Y 11 inch (64 to 432 mm) can be RECALL STORE/DELETE entered in X, and a length of 2-1/2" to 11-5/8" (64 to 297 mm) can be entered in Y.
SCANNING SETTINGS (ORIGINAL SIZE, EXPOSURE, RESOLUTION, AND FILE FORMAT) SELECTING THE EXPOSURE You can adjust the exposure manually to match the type of original. After loading the original in scanner mode, follow the steps below. The default setting for the exposure is "AUTO". Q Change the exposure 1 Touch the [EXPOSURE] key. 3 Touch the [OK] key. AUTO EXPOSURE 300x300dpi RESOLUTION PDF MMR(G4) FILE FORMAT AUTO 8½ 11 Select [AUTO] or [MANUAL].
SCANNING SETTINGS (ORIGINAL SIZE, EXPOSURE, RESOLUTION, AND FILE FORMAT) 3 Touch the [OK] key. For resolution other than [200x200dpi], the [HALF TONE] key can be selected. OK Internet-Fax mode You will return to the initial screen. READY TO SEND.
SPECIAL FUNCTIONS You can use various functions for scanning and transmitting images. Set these functions as needed. ERASING EDGE SHADOWS (ERASE) The erase function is used to erase the shadow lines on images produced when scanning thick originals or books. The erase modes that can be selected are shown below. The erase width is approximately 1/2" (10 mm) in its initial setting.
SPECIAL FUNCTIONS TRANSMITTING A DIVIDED ORIGINAL (DUAL PAGE SCAN) When an open book is scanned and transmitted, you can use this function to divide the two open pages of the book into two separate pages. This function can only be used when the original is scanned using the document glass.
SPECIAL FUNCTIONS AUTOMATIC TRANSMISSION AT A SPECIFIED TIME (TIMER TRANSMISSION) This feature enables you to set up a transmission to be performed automatically at a specified time up to a week in advance. A combined total of 97 timer transmission and memory transmission jobs can be stored. NOTES To perform a timer transmission, the document must be scanned into memory.
SPECIAL FUNCTIONS TRANSMITTING TWO ORIGINAL PAGES AS A SINGLE PAGE (2IN1) This function allows you to reduce the size of original pages by one half to fit two pages evenly on one page when transmitting.
SPECIAL FUNCTIONS 3 Touch the [OK] key. You will return to the screen of step 1. RESEND SPEAKER the image as explained in "BASIC 4 Send TRANSMISSION METHOD" (pages 12 to 15). OK NOTE To cancel 2in1... DUAL PAGE SCAN Press the [CA] key. TRANSMITTING THE FRONT AND BACK SIDES OF A CARD ON ONE SHEET OF PAPER (CARD SHOT) When scanning a card, this function allows you to combine the front and back sides on a single sheet of paper. To use this function, the original must be scanned on the document glass.
SPECIAL FUNCTIONS the X dimension (width) and Y 3 Enter dimension (length) of the original with the steps 4 through 22 of "BASIC 6 Follow TRANSMISSION METHOD" (pages 12 to keys. 14). OK CANCEL 7 Press the [START] key. OK The front side of the card is scanned. SIZE RESET FIT TO SEND SIZE X (width) is initially selected. Enter X and then touch the Y ( ) key to enter Y. To return the X and Y values to the initial settings configured in the key operator programs, touch the [SIZE RESET] key.
SPECIAL FUNCTIONS TRANSMITTING A LARGE NUMBER OF PAGES (JOB BUILD) When you need to scan more pages than can be loaded in the automatic document feeder at once, use this function to scan the pages in sets. The maximum number of pages that can be loaded in the automatic document feeder is 50.
SPECIAL FUNCTIONS PRINTING A TRANSACTION REPORT (TRANSACTION REPORT) When performing Internet-Fax transmission, you can use this function to print a transaction report under conditions different from those of the relevant key operator program. If you use this function, you can print a transaction report under your desired conditions only for the current transmission job.
SPECIAL FUNCTIONS PROGRAMMING (PROGRAM) FREQUENTLY USED OPERATIONS This function allows you to store the steps of an operation, including the destination and scanning settings, into a program. When you want to send a document to that destination, you can simply call up the program and the steps will be performed automatically. This function is convenient when you frequently send documents, such as a daily report, to the same destination. Up to eight programs can be stored.
PRIORITY TRANSMISSION OF A STORED JOB If you have an urgent transmission job and multiple transmission jobs have already been stored, you can give priority to the urgent job so that it will be transmitted immediately after the job currently being executed. This is done from the job status screen. For details on using the job status screen, refer to page 1-14 of Operation manual (for general information and copier operation). 1 Press the [JOB STATUS] key.
CANCELING AN E-MAIL/FTP TRANSMISSION You can cancel a transmission job that is in progress or that has been stored. Cancelation is done from the scanner job status screen for the mode in which you stored tramsmission. 1 Press the [JOB STATUS] key. the job key of the transmission job 3 Touch you wish to cancel. The touched key is highlighted. 4 Touch the [STOP/DELETE] key. ING ING ING the mode 2 Touch [INTERNET-FAX]).
INTERNET FAX RECEPTION This function is available only if the model of the main unit is AR-M355N or AR-M455N, or if the document filing functions are expanded. For reception of Internet-Fax data, this machine connects automatically to the mail (POP3) server at specified intervals* to check to see if new Internet-Fax data has been received. If new data has been received, this machine reads and prints it.
TRANSFERRING RECEIVED INTERNET-FAXES TO ANOTHER MACHINE WHEN PRINTING IS NOT POSSIBLE (FORWARDING FUNCTION) This function is available only if the model of the main unit is AR-M355N or AR-M455N, or if the document filing functions are expanded. When printing is not possible because of a paper, toner, or other problem, you can transfer received Internet-Faxes to another Internet-Fax machine if that machine has been appropriately programmed in your machine.
STORING, EDITING, AND DELETING FROM THE TOUCH PANEL One-touch and group keys for Scan to E-mail and Internet-Fax, group indexes, and senders can also be stored, edited and deleted from the touch panel of the machine. STORING ONE-TOUCH KEYS (only addresses for Scan to E-mail and Internet-Fax) The touch panel of the machine can also be used to store destinations for Scan to E-mail and Internet-Fax.
STORING, EDITING, AND DELETING FROM THE TOUCH PANEL 8 Touch a letter key. INITIAL CANCEL Q W E R T Y U I O A S D F G H J K L Z X C V B N M Touch the [ADDRESS] key. 13No.048 OK E-MAIL P ABC The E-mail address entry screen appears. ABCD NAME INITIAL abc FAX A ADDRESS SPACE Up to 10 search characters can be entered. If you make a mistake, touch the key to delete the mistake and then enter the correct character. the 14 Enter destination.
STORING, EDITING, AND DELETING FROM THE TOUCH PANEL you have finished programming the 19 When one-touch key, touch the [EXIT] key. Settings for Scan to E-mail File type: PDF*/TIFF Compression mode: NONE/MH(G3)/MMR(G4)* If you wish to program another one-touch key, touch the [NEXT] key. Settings for Internet-Fax Compression mode: MH(G3)*/MMR(G4) The default setting is indicated by an asterisk (*). When you have completed the settings, touch the [OK] key.
STORING, EDITING, AND DELETING FROM THE TOUCH PANEL 7 Touch the [YES] key. The following steps are for deleting a one-touch key. 6 Touch the [DELETE] key. DELETE If you wish to delete another one-touch key, repeat steps 3, 6, and 7. DELETE THE ADDRESS? EXIT ABCD CORPORATION NO YES T-FAX 1/2 NOTES If you cannot edit or delete a one-touch key If you attempt to edit or delete a one-touch key in the following situations, a warning message will appear and editing/deletion will not be possible.
STORING, EDITING, AND DELETING FROM THE TOUCH PANEL 7 Touch the [OK] key. NOTE One group key cannot be stored in another group key. Group keys appear grayed out and cannot be selected. The number of destinations in the group appears to the right of the [ADDRESS] key. You can enter a destination directly by touching the [DIRECT ENTRY] key. If you select the transmission method to be used (such as E-mail or Internet-Fax), the relevant entry screen will be displayed.
STORING, EDITING, AND DELETING FROM THE TOUCH PANEL The following steps are for deleting a group key. The one-touch keys stored in the group are highlighted. To add another one-touch key to the group, touch the key to highlight it. To delete a one-touch key from the group, touch the key so that it is no longer highlighted. 6 Touch the [DELETE] key.
STORING, EDITING, AND DELETING FROM THE TOUCH PANEL 4 Touch the [SENDER NAME] key. 9 Touch the [OK] key. The "No." that automatically appears is the lowest number from 001 to 999*1 (500*2) that has not yet been programmed. When [SENDER NAME] is touched, the letter-entry screen appears. No.001 SENDER NAME INITIAL CANCEL I O J K L P abc ABC M 5 Enter the sender name. 10 Touch the [INDEX] key.
STORING, EDITING, AND DELETING FROM THE TOUCH PANEL 14 Enter the e-mail address of the sender. CANCEL E-MAIL ADDRESS 17 Touch the [LOGIN NAME] key. No.001 SENDER NAME OK ppd1@abcd.co INITIAL ADDRESS AB/ab 12#$% Up to 64 characters can be entered. If you make a mistake, touch the key to move the cursor ( ) back one space and then enter the correct character. 18 Enter the login name. LOGIN NAME 15 Touch the [OK] key. CANCEL INDEX KEY NAME LOGIN NAME ABC abc SPACE document d ppd1@abcd.
STORING, EDITING, AND DELETING FROM THE TOUCH PANEL 4 Edit or delete the sender. SENDER CONTROL / AMEND/DELETE No.001 SENDER NAME document INITIAL d ppd1@abcd.com ADDRESS KEY NAME document LOGIN NAME ********** DELETE INDEX Edit sender information in the same way that you stored it. When finished, touch the [EXIT] key to return to the screen of step 3. To delete the sender, touch the [DELETE] key. A message appears asking you to confirm your selection.
STORING, EDITING, AND DELETING FROM THE TOUCH PANEL 3 Touch the [SENDING ADDRESS LIST] key. 4 Touch the key of the list you wish to print. ADDRESS LIST ALL CUSTOM SETTING LIST INDIVIDUAL LIST SENDING ADDRESS LIST GROUP LIST PROGRAM LIST MEMORY BOX LIST [PROCESSING PRINT DATA] appears in the message display and printing begins. To cancel printing, touch the [CANCEL] key. NOTES The list is printed before other print jobs waiting to be printed.
STORING, EDITING, AND DELETING FROM THE TOUCH PANEL settings are displayed. Make sure 7 Your they are correct. NOTE Up to 500*1 (300*2) destinations can be stored in a program. Destinations can be entered using onetouch keys, group keys, and (Quick) key. PROGRAM No.1 REGISTRATION IS COMPLETED PROGRAM NAME PROGRAM FOR ABCD 6 Touch the [OK] key.
TROUBLESHOOTING If a problem or question arises, try to solve the situation using the following information before contacting your authorized SHARP dealer. The image cannot be scanned. Cause: The original is loaded upside down. Solution:The original must be placed face down. A moiré (stripe pattern) appears on the scanned image. Cause: A slight amount of moiré sometimes appears when printed matter is scanned.
TROUBLESHOOTING The recipient does not receive transmitted data. Cause: An incorrect destination was selected. Otherwise, there is a mistake in the information stored for the destination (e-mail address or FTP server information). Solution:Select the correct destination and make sure the correct information is stored for the destination. (Refer to page 14.
TROUBLESHOOTING Error Code Table Error Code Description of the Error CE-01 The network interface card is out of order. CE-02 Cannot find the specified mail server or FTP server. CE-03 The server was down during the scanning of the original. CE-04 An invalid account name or password for the FTP server has been entered. CE-05 An invalid directory of the FTP server has been entered. CE-06 Cannot find the specified mail server (POP3 server).
TROUBLESHOOTING IMPORTANT POINTS WHEN USING SCAN TO E-MAIL Be very careful not to send image data files that are too large. Your mail server's system administrator may have placed a limit on the amount of data that can be sent in one e-mail transmission. If this limit is exceeded, the e-mail will not be delivered to the recipient.
KEY OPERATOR PROGRAMS This section explains the key operator programs that are related to the network scanner feature of the machine. Key operators should read this section well to ensure correct use of the programs. For key operator programs that are related to general use of the machine, see the key operator's guide. NOTE Some programs in the key operator program list may not be available, depending on the model of the main unit and whether some peripheral units are installed or not.
KEY OPERATOR PROGRAMS the numeric keys to enter the five-digit 3 Use key operater code number. KEY OPERATOR CODE 4 desired 6 Make program. settings for the selected Select the desired program from among the programs listed on the previous page. Detailed descriptions for program settings start on the next page. For the factory default setting for the key operator code number, see page 2 of the key operator’s guide. the [OK] key to return to the screen 7 Touch of step 5.
KEY OPERATOR PROGRAMS SETTING PROGRAMS The setting programs for the network scanner feature of the machine are explained here. For key operator programs that are related to the copy function and general use of the machine, see the key operator’s guide. For programs related to the printer and network scanner functions, see the corresponding manuals.
KEY OPERATOR PROGRAMS Scan complete sound setting Initial file format setting This program is used to set the volume of the beep sound that informs you that the original has been scanned. Two volume levels are available, or the beep can be turned off. You can change the default file format (file type, compression mode, and file creation method) used when the e-mail address is entered manually for a Scan to E-mail transmission.
KEY OPERATOR PROGRAMS the [NAME] key and enter the name. 1 Touch The name entry screen appears. Original print on transaction report This program is used to have part of the first page of the Internet-Fax printed on the transaction report. This program is used in conjunction with the transaction report print setting (at right), and is not effective when printing of the transaction report is disabled.
KEY OPERATOR PROGRAMS KEY OPERATOR PROGRAMS ACTIVITY REPORT PRINT SELECT SETTING I-Fax reception report request timeout setting OK If the previous program "I-Fax reception report on/ off setting" is set, use this program to set the time to receive the reception report. You can select a value from 1 minute to 240 hours in 1 minute increments. The default setting is one hour.
KEY OPERATOR PROGRAMS Reception check interval setting If this setting is changed, the setting of "Maximum size of e-mail attachments" of E-MAIL/FTP settings will also be changed (page 56). This setting determines the interval at which the machine checks automatically to see if the mail (POP3) server has received new mail. After finding a new e-mail, the machine loads the data and prints it. The interval can be set from 0 minute to 8 hours in 1 minute increments. The default setting is 5 minutes.
KEY OPERATOR PROGRAMS Set address for data forwarding Anti junk mail/domain name setting When a problem prevents the machine from printing a received Internet-Fax, the transfer function can be used to forward the received Internet-Fax to another machine. Use this setting to program the e-mail address of the destination machine. Only one e-mail address can be programmed (maximum of 64 digits). Touch the [FORWARDING TO] key and input the address.
KEY OPERATOR PROGRAMS PRINTING OUT SETTINGS Settings established with the key operator programs can be verified by printing them out. 1 Press the [CUSTOM SETTINGS] key. the [KEY OPERATOR PROGRAMS 5 Touch LISTS] key. KEY OPERATOR PROGRAMS LIST PRINT OK KEY OPERATOR PROGRAMS LIST IMAGE SENDING ACTIVITY REPORT (FAX) ANTI JUNK FAX NUMBER LIST the [KEY OPERATOR PROGRAMS] 2 Touch key.
SPECIFICATIONS For information on power requirements, power consumption, dimensions, weight, and other specifications that are common to all features of the machine, refer to Operation manual (for general information and copier operation).
OPERATION MANUAL (for network scanner) SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07430-1163. www.sharpusa.com SHARP ELECTRONICS OF CANADA LTD.
