[00]COVER.fm 1 ページ 2004年10月26日 火曜日 午後3時41分 CODE : 00ZARFX12/A1E LASER PRINTER OPTIONS FAX EXPANSION KIT (For North America) MODEL AR-FX12 OPTION AR-MM9 CONTENTS [1] PRODUCT OUTLINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1 [2] CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1 [3] SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 1 [4] EXTERNAL VIEWS AND INTERNAL STRUCTURES . . . . . . .
[co]CONTENTS.fm 1 ページ 2004年10月26日 火曜日 午後3時41分 CONTENTS [1] PRODUCT OUTLINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 [6] SIMULATIONS, FAX SOFTWARE SWITCH 1. Entering the simulation mode . . . . . . . . . . . . . . . . . . . . 6-1 [2] CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 2. Switching the simulation mode . . . . . . . . . . . . . . . . . . . 6-1 3. Canceling the simulation mode . . . . . . . . . . . . . . . . . . . 6-1 4. Simulation list . .
[01]OUTLINE ・ CONFIGU.fm 1 ページ 2004年10月26日 火曜日 午後3時42分 [1] PRODUCT OUTLINE This unit provides the FAX function and the PC-FAX function when installed to the following machines: Machines to install this unit : •AR-M355U/M455U •AR-M351U/M451U •AR-M355N/M455N •AR-M351N/M451N [2] CONFIGURATION Extended memory * Installed to FAX I/F PWB. FAX I/F PWB *1 FAX Interface cable FAX-BOX unit *1) Installed to the machine MFP controller PWB.
[03]SPECIFICATIONS.fm 1 ページ 2004年10月26日 火曜日 午後3時42分 [3] SPECIFICATIONS F. Plural destinations specifications 1. FAX function A. Mode Scanner (Scan to E-mail, Scan to Sharpdesk, Scan to FTP, Scan to HDD), FAX, Internet FAX B. Support system Mode Support server Scanner SMTP Server FTP Server Internet FAX POP Server SMTP Server ESMTP Server FAX --- C.
[03]SPECIFICATIONS.
[04]ETERNALVIEWS.fm 1 ページ 2004年10月26日 火曜日 午後3時42分 [4] EXTERNAL VIEWS AND INTERNAL STRUCTURES 1. Operation panel Model Key name Description in this manual AR-M355N/ AR-M455N Described in the configuration where the optional fax expansion kit (AR-FX12) is installed on the AR-M355N/AR-M455N models. AR-M355U/ AR-M455U No functions related to document filing or Internet fax reception are described in this manual.
[04]ETERNALVIEWS.fm 2 ページ 2004年10月26日 火曜日 午後3時42分 2. FAX mode (Condition setting screen) The condition settings screen of fax mode is displayed by pressing the [IMAGE SEND] key while the document filing mode (printer mode), copy mode, or job status screen appears in the touch panel. In the explanations that follow, it is assumed that the initial screen that appears after pressing the [IMAGE SEND] key is the condition settings screen (shown below).
[04]ETERNALVIEWS.fm 3 ページ 2004年10月26日 火曜日 午後3時42分 B. Address book screen (alphabetically ordered) The screen below appears initially when the address book is set as the initial screen using "Default display settings" in the key operator programs. • The screen below is the alphabetical index screen. You can also have the user index screen appear initially. • The screen appears as shown below when the network scanner option is not installed. READY TO SEND.
[04]ETERNALVIEWS.fm 4 ページ 2004年10月26日 火曜日 午後3時42分 3. PWB 3 2 1 6 5 4 1 2 3 4 5 6 Modem control PWB FAX FLASH ROM PWB FAX power PWB TEL/LIU PWB FAX I/F PWB (Installed to the machine side) FAX extended memory (Installed to FAX I/F PWB) FAX communication control FAX control program Supplies power to the FAX unit.
[05]UNPACKINGANDINSTALLATION.fm 1 ページ 2004年10月26日 火曜日 [5] UNPACKING AND INSTALLATION • For installation of AR-FX12, the control PWB unit and the scanner unit must have been installed. • Start installation after checking that the COMMUNICATION indictor on the operation panel is neither lit nor blinking. 午後3時43分 3)Remove the FAX I/F cover. Remove the two screws that secure the FAX I/F cover of the control PWB unit and remove the FAX I/F cover.
[05]UNPACKINGANDINSTALLATION.fm 2 ページ 2004年10月26日 火曜日 午後3時43分 7)Attach the fax box unit. 11)Set the destination for the main unit. <1>Secure screw A to the rack. <2>Fit the positioning hole located on the side facing fax box unit to screw A, slide the fax box unit toward the rack, and secure the rack and the fax box unit using two screws B. • Be sure to set the destination for the main unit before setting the destination for the fax.
[05]UNPACKINGANDINSTALLATION.fm 3 ページ 2004年10月26日 火曜日 <4>Select the desired destination from the destination list (separate table 1) by entering the number using the 10-key pad and press the [START] key. (For example, to set the UK as the destination, enter [10110100] using the 10-key pad and then press the [START] key. 午後3時43分 <4>Use the 10-key pad to enter [1] in the submenu screen and press the [START] key. <5>The screen shown below is displayed and memory clear operation is executed.
[06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 1 ページ 2004年10月26日 火曜日 午後3時44分 [6] SIMULATIONS, FAX SOFTWARE SWITCH 1. Entering the simulation mode a. Normal mode Enter the copy mode and perform the following procedures. [P] [*] [C] [*] [Main code] [START] [Sub code] [START] b. FAX mode Enter the copy mode and perform the following procedures. [9] [*] [8] [#] [7] 2. Switching the simulation mode Press [USER SETTING] to return to the code entry screen. 3.
[06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 2 ページ Code 2004年10月26日 火曜日 午後3時44分 Function (Content) Purpose Section Item Main Sub 66 1 Used to set the FAX soft switch function. (Used to utilize the FAX soft switch function.) Setup FAX 2 Used to set the FAX soft switch setup to the default. (Except for the adjustment values) Data clear FAX Data 3 Used to check the operations of FAX PWB memory (read/write). (This adjustment is required when replacing the PWB with a new one.
[06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 3 ページ Code 2004年10月26日 火曜日 午後3時44分 Function (Content) Purpose Section Item Main Sub 66 21 Used to print the FAX information (registrations, communication Adjustment, setup, management, file management, system errors, protocol). operation data output, (Only when FAX is installed.) check (display, print) FAX 23 Used to download the FAX program. (Only when FAX is installed.) Inhibited FAX 24 Used clear the FAST memory data. (Only when FAX is installed.
[06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 4 ページ 2004年10月26日 火曜日 午後3時44分 5. Detail of simulations 22-11 Main code 22 Purpose 22-5 Purpose Function (Content) Other Used to check the ROM version of each unit (section). Section Item Software Operation/Procedure The version of each ROM is displayed. SIMULATION 22-5 ROM VERSION DATA DISPLAY. S/N : 000000000 MFP : 1.00 (LANGUAGE : 1.00) PCU : 1.00 BOOT : SCANNER : 1.00 FAX : FINISHER : 1.00 SADDLE UNIT : 1.00 LCC : INSERTER : 1.
[06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 5 ページ 2004年10月26日 火曜日 午後3時44分 Main code 23 Main code 24 23-2 24-10 Purpose Function (Content) Jam/Trouble data print Section Item Operation/Procedure The current selected data is displayed on the side of the menu. Purpose Function (Content) Section Item Operation/Procedure SIMULATION 23-2 JAM/TOROUBLE DATA PRINT MODE. SELECT SETTING, AND PRESS START. 0. TRAY SELECT :AUTO ONLY 1.
[06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 6 ページ 2004年10月26日 火曜日 午後3時44分 0 1 2 Main code 46 46-12 Purpose Function (Content) Adjustment Used to adjust the print density in the FAX mode (all modes). An adjustment with this simulation affects all the reading density adjustment values. (Only when FAX is installed) Section Item Picture quality Operation/Procedure The exposure mode to be set is selected.
[06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 7 ページ 2004年10月26日 火曜日 午後3時44分 46-13 Purpose Function (Content) Adjustment Used to adjust the reading density in the FAX mode (Standard mode). (Only when FAX is installed.) Section Item Picture quality Operation/Procedure The exposure mode to be set is selected. (FAX Standard mode individual adjustment) 1) The current set value is highlighted on the right side of each item. In this screen, be sure to select "1: PRINT START.
[06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 8 ページ 2004年10月26日 火曜日 午後3時44分 46-14 Purpose Function (Content) Adjustment Used to adjust the reading density in the FAX mode (Fine mode). (Only when FAX is installed.) Section Item Picture quality Operation/Procedure The exposure mode to be set is selected. (FAX Fine mode individual adjustment) 1) The current set value is highlighted on the right side of each item. In this screen, be sure to select "1: PRINT START.
[06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 9 ページ 2004年10月26日 火曜日 午後3時44分 46-15 Purpose Function (Content) Adjustment Used to adjust the reading density in the FAX mode (Super Fine mode). (Only when FAX is installed.) Section Item Picture quality Operation/Procedure The exposure mode to be set is selected. (FAX Super Fine mode individual adjustment) 1) The current set value is highlighted on the right side of each item. In this screen, be sure to select "1: PRINT START.
[06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 10 ページ 2004年10月26日 火曜日 午後3時44分 46-16 Purpose Function (Content) Adjustment Used to adjust the reading density in the FAX mode (Ultra Fine mode). (Only when FAX is installed.) Section Item Picture quality Operation/Procedure The exposure mode to be set is selected. (FAX Ultra Fine mode individual adjustment) 1) The current set value is highlighted on the right side of each item. In this screen, be sure to select "1: PRINT START.
[06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 11 ページ 2004年10月26日 火曜日 午後3時44分 Main code 56 Main code 61 56-1 61-3 Purpose Function (Content) Data transfer Section Item Operation/Procedure Used to perform data transfer. Select an item with 10 digit key pad and press START key. The following operation is performed and the display returns to the original state. 1. Data transfer executed 2. Data transfer not executed Purpose Function (Content) SIMULATION 56-1 DATA COPY. SELECT 1 - 7, AND PRESS START. 1.
[06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 12 ページ 2004年10月26日 火曜日 午後3時44分 66-2 66-3 Purpose Function (Content) Purpose Function (Content) Data clear Used to set the FAX soft switch setup to the default. (Except for the adjustment values) Section FAX Item Data Operation/Procedure The current set value of SW1 is displayed. Entry of 1 ~ 8 is effective. 1) Specify the bit to be changed (highlighted) with a number. 2) Select the country code, and press START to rewrite the setting.
[06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 13 ページ 2004年10月26日 火曜日 午後3時44分 66-4 Purpose Function (Content) Operation test, check Used to check the operations of data signal output in the FAX data output mode. (Used to check the MODEM operation.) Send level 0db (Max.) (Only when FAX is installed.) Section FAX Item Operation Operation/Procedure Signal output check (level Max.) When CUSTOM SETTING is pressed during execution of this simulation, execution is stopped.
[06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 14 ページ 2004年10月26日 火曜日 午後3時44分 66-5 Purpose Function (Content) Operation test, check Used to check the operations of data signal output in the FAX data output mode. (Used to check the MODEM operation.) Signals are sent in the send level set with the soft switch. (Only when FAX is installed.) Section FAX Item Operation Operation/Procedure Signal output check (Send level is set with the soft SW.
[06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 15 ページ 2004年10月26日 火曜日 午後3時44分 SIMULATION 66-8 MESSAGE OUTPUT CHECK.(LEVEL MAX) SELECT 1-20, AND PRESS START. 1.NONE 2.PAUSE 3.MESSAGE1 4.MESSAGE2 5.MESSAGE3 6.MESSAGE4 7.MESSAGE5 8.MESSAGE6 9.MESSAGE7 10.MESSAGE8 11.MESSAGE9 12.MESSAGE10 13.MESSAGE11 14.MESSAGE12 15.MESSAGE13 16.MESSAGE14 17.MESSAGE15 18.ALARM 19.RINGER 20.EXT.TEL.
[06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 16 ページ 2004年10月26日 火曜日 午後3時44分 66-9 Purpose Function (Content) Operation test, check Used to check the output operation of the FAX sound signals. (Sound output IC operation check) (Only when FAX is installed.) Section FAX Item Operation Operation/Procedure A voice message is outputted. (Send level is set with SW.) Enter a number during execution to change the kind of signal. Press START to start sending a voice message.
[06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 17 ページ 2004年10月26日 火曜日 午後3時44分 66-11 66-12 Purpose Function (Content) Purpose Function (Content) Operation test, check Used to check the output operation of FAX G3 mode 300BPS. (Used to check the MODEM operation.) Send level Max. (Only when FAX is installed.) Section FAX Item Operation Operation/Procedure A signal of 300bps is outputted. (Level Max.) Enter a number during execution to change the kind of signal. Press START to start sending a voice message.
[06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 18 ページ 2004年10月26日 火曜日 午後3時44分 66-13 66-15 Purpose Function (Content) Purpose Function (Content) Setup Used to enter (set) the number for the FAX dial signal output test. (The dial number signal set with this simulation is outputted in the dial signal output test with SIM 66-14~16) (Only when FAX is installed.) Section FAX Item Data Operation/Procedure The dial test number is set. Enter a number with 10 digit key pad, * key, and # key.
[06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 19 ページ 2004年10月26日 火曜日 午後3時44分 66-16 66-17 Purpose Function (Content) Purpose Function (Content) Setup Used to test the dial signal (DTMF) output in the FAX tone dial mode. (The dial number signal set with SIM 66-13 is outputted.) The send level can be set to an optional level. Used to check dialing troubles and the operation. Section FAX Item Operation Operation/Procedure The dial test is performed. (DTMF signal output) 1) The level (dB) setup is made.
[06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 20 ページ 2004年10月26日 火曜日 午後3時44分 SIMULATION 66-20 ADDRESS DATA (READ FROM FLASH ROM) ARE YOU SURE ? 1. YES 2. NO 66-19 Purpose Function (Content) Setup Used to backup the Address data (Set values of rapid key dialing) into the flash Memory (AR-MM9). (When FAX is installed and FAX extended memory is installed.) Section FAX Item Operation Operation/Procedure Address data is backed up into Flash ROM.
[06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 21 ページ 2004年10月26日 火曜日 午後3時44分 66-23 66-30 Purpose Function (Content) Purpose Function (Content) Operation test, check Used to download the FAX program. (Only when FAX is installed.) Section FAX Item Operation Operation/Procedure The contents of ROM in the option memory (AR-MM9) installing section are copied as FAX program. Setup Used to check TEL/LIU status change. (Only when FAX is installed.
[06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 22 ページ 2004年10月26日 66-33 Purpose Function (Content) Section Item Operation/Procedure 火曜日 午後3時44分 66-35 Setup Used to check signal detection. FAX Operation When the signal is detected, the display is highlighted. Purpose Function (Content) Section Item Operation/Procedure (This mode is for production check, and inhibited in the market.) SIMULATION 66-33 SIGNAL DETECT CHECK.
[06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 23 ページ 2004年10月26日 火曜日 午後3時44分 66-36 66-39 Purpose Function (Content) Purpose Function (Content) Registration of FAX destination Section FAX Item Operation/Procedure The current destination saved in the EEPROM of FAXBOX is displayed. Entries of 1 - 6 only are valid. Enter the number corresponding to your desired destination. (If no destination is saved in the EERPOM of FAXBOX, "0" is displayed.
[06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 24 ページ 2004年10月26日 火曜日 午後3時44分 SIMULATION 66-43 PIC ADJUSTMENT VALUE WRITING . ENABLE WRITE PIN (for FAX PROGRAM ROM). SELECT 0-12, AND PRESS START. 0. WRITING for PIC 1. ci_level_judge 2 2. ci_cycle_min 10 3. ci_cycle_max 107 4. ci_range 5 5. ci_count 3 6. ci_detect 8 7. fnet_level_judge 1 8. fnet_range 3 9. fnet_time_out 100 10. fnet_count 3 11. poff_time 3 12.
[06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 25 ページ 2004年10月26日 火曜日 午後3時44分 6. FAX software switch A. SOFT SW SETUP CHANGE QUICK REFERENCE Large item Dial (Calling) Medium item Reception (Calling) Key operator Soft SW No.
[06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 26 ページ 2004年10月26日 Large item TEL/FAX auto switch Communication Medium item 火曜日 Content of switch General Receive print G3/SG3 Purpose of use SW 51-1 External Ring back tone ON time telephone call SG3 Receive Key operator Soft SW No.
[06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 27 ページ 2004年10月26日 火曜日 午後3時44分 B. Details SW Bit No. No. 1 Item 1-8 Country code Switch selection and function Country code set by ITU-T. Control is made according to the set country code.
[06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 28 ページ 2004年10月26日 SW Bit No. No. 4 Item 5 Not used 6 F code relay broadcast function 火曜日 午後3時44分 Switch selection and function USA Initial value Key operator 0 Used to set whether relay broadcast transmission is made by receiving F code relay broadcast instruction from the other party or F code relay broadcast instruction is not received (even though the relay box number by SUB is matched on).
[06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 29 ページ 2004年10月26日 SW Bit No. No. 6 7 Item 火曜日 Switch selection and function 1 Not used 2 Auto/Manual default setup Initial value 0 Rotate 0 Access allowed Key operator Send setup rotating EEPROM access inhibit When an access trouble to EEPROM in the modem controller occurs, FAX operation cannot be performed. When this item is set to INHIBIT, FAX operation can be performed.
[06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 30 ページ 2004年10月26日 SW Bit No. No. 9 Item 火曜日 午後3時44分 Switch selection and function USA 7,8 Not used Initial value Key operator 0 0 10 1-4 Ring back tone ON time Used to set the pseudo-ringing to an external telephone and the ring back tone ON time to the line. Setting can be made in the range of 0 ~ 3sec in the increment of 200ms. When set to 0, however, same as setting to 1sec.
[06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 31 ページ 2004年10月26日 SW Bit No. No. 14 2 3 Item 火曜日 午後3時44分 Switch selection and function USA Notification to external telephone in remote switch Used to set whether an alarm notification is sent to the external telephone or not when remote switch from an external telephone is performed. Remote switch operation allowed Used to set whether remote switch from an external telephone is allowed only when call-in or when call-in and call-out.
[06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 32 ページ 2004年10月26日 SW Bit No. No. 17 Item 火曜日 午後3時44分 Switch selection and function USA 5 Used to set whether error resend mode is executed or not. ECM Valid only when communication is made in a mode other than V.34. (Valid for other than V.34) 1: NO (ECM function NO) 0: YES (Reflected on V.21 DIS/ (ECM function YES) DCS.
[06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 33 ページ 2004年10月26日 SW Bit No. No. 20 Item 火曜日 午後3時44分 Switch selection and function USA Initial value 6 Used to set the time interval (sec) from sending CED or ANSam to sending Countermeasures FSK signal of DIS. against echo in reception 1: 500msec 0: 75msec (CED tone send interval) If either SW20-6 or SW2-7 is YES, disconnection of the line after completion of communication is delayed for 1.5sec.
[06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 34 ページ 2004年10月26日 SW Bit No. No. 24 2 3 Item 火曜日 Switch selection and function USA EQM judgment threshold value when confirming TCF reception Used to set whether the threshold value (FTT) is set severely or loosely for EQM judgment in confirmation of TCF reception. Judgment method in confirmation of TCF reception Used to set the judgment method of FTT in confirmation of TCF reception.
[06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 35 ページ 2004年10月26日 SW Bit No. No. Item 火曜日 午後3時44分 Switch selection and function USA 26 4-8 Not used Initial value Key operator 0 0 0 0 0 27 1-4 Echo suppressor tone setup Used to set YES/NO of echo suppressor tone in each high-speed modulation system. Bit No. 0 0 1 V.33 1 1 : NO 0 : YES V.17 2 1 : NO 0 : YES V.29 3 1 : NO 0 : YES V.27 4 1 : NO 0 : YES 5-8 Not used YES (No for V.
[06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 36 ページ 2004年10月26日 SW Bit No. No. Item 31 1-4 ID (No.) setting 2 (2nd digit: When dial inputting or dialing) 火曜日 午後3時44分 Switch selection and function USA Used to set the ID No. when the PBX function is enabled. This setting is valid when "ID" is set in SW59-7-8.If the set value is outside the specified range, it is not used as an ID No. 0 Used to set the ID No. when the PBX function is enabled. This setting is valid when "ID" is set in SW59-7-8.
[06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 37 ページ 2004年10月26日 SW Bit No. No. 35 5 Item Received document output setup 火曜日 午後3時44分 Switch selection and function USA Initial value Used to set whether all received data are collectively printed after completion of all FAX reception or each page is printed after completion of reception of each page. 0 Collectively outputted Key operator 1: Each page is printed 0: Collectively printed after reception of each after completion of all page.
[06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 38 ページ 2004年10月26日 SW Bit No. No. 37 7 Item Page number print 午後3時44分 Switch selection and function 1 2 NO (Not print) 0 0 NO (Not print) 0 1 Print (Always) 1 0 Only in an error (Print) 1 1 Used to set whether the communication speed during communication and the reception level during reception are displayed on the LCD or not.
[06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 39 ページ 2004年10月26日 SW Bit No. No. 40 5 Item Report output (in confidential reception) 火曜日 午後3時44分 Switch selection and function USA Used to set whether the communication report table (reception) is outputted or not in confidential reception. 0 Initial value Key operator Output Initial setup In case of an error Initial setup 1: Communication report 0: Communication report table is not printed. table is printed.
[06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 40 ページ 2004年10月26日 SW Bit No. No. 43 2 Item V.34 mode function (when call in) 火曜日 Switch selection and function USA Used to set whether V.34 mode is enabled or not as a capacity of the own machine when receiving (calling in). 1: V.34 mode function disable 3-6 V.34Symbol Rate Mask (when receiving) 午後3時44分 Initial value 0 Enable 0 3429 0: V.34 mode function enable Used to set Symbol Rate in reception of V.34 mode.
[06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 41 ページ 2004年10月26日 SW Bit No. No. 46 1 2 Item Primary channel return mode setup 火曜日 午後3時44分 Switch selection and function USA Used to set the next state after completion of primary channel phase. 1: PPh signal send sequence 1 PPh signal 0 Continuous only 0: Sh signal send sequence Dial tone detection kind Used to set whether continuous or intermittent (repetition of ON/OFF) is detected as detection of the dial tone (DT) from the line switchboard.
[06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 42 ページ 2004年10月26日 SW Bit No. No. 50 51 7 Item Setup of send/receive complete sound (buzzer length) 8 Not used 1 Voice answering send level to the line 火曜日 午後3時44分 Switch selection and function USA Used to set the buzzer length from the speaker made after completion of FAX transmission and reception. Excluding when a communication error occurs. 1: 3sec 0 Initial value Key operator 1sec 0: 1sec 0 Used to set the voice answering volume to the line.
[06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 43 ページ 2004年10月26日 SW Bit No. No. 53 Item 3,4 Reception end sound volume 火曜日 午後3時44分 Switch selection and function Used to set the volume of the FAX reception end sound from the speaker. The volume is available in the following 4 levels. However, "Medium" cannot be selected with the key operation. Bit No.
[06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 44 ページ 2004年10月26日 SW Bit No. No. Item 55 1,2 Line monitor sound volume "Small" setup 火曜日 午後3時44分 Switch selection and function USA Used to set the sound level of "Small" line monitor sound (key operation setup) from the speaker. 1 Bit No.
[06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 45 ページ 2004年10月26日 SW Bit No. No. 59 3 Item Recall allow in communication error 火曜日 午後3時44分 Switch selection and function USA Used to set whether recall is made or not when a communication error occurs in transmission. 1 Recall 0 500ms 0 00 1: Recall 4 Lower limit of dial tone ON detection time Key operator Send setup 0: Not recall Used to set the dial tone and the minimum required time for detection of the dial tone when detecting the dial tone.
[06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 46 ページ 2004年10月26日 SW Bit No. No. Item 64 1-4 Minimum pause time (10PPS) setup 火曜日 午後3時44分 Switch selection and function USA Used to set the minimum pause time when dialing at 10PPS. The set range is 0 - 15 by binary input of N into "N x 10ms + 800ms" (800 950ms).
[06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 47 ページ 2004年10月26日 SW Bit No. No. Item 70 1-4 Pause time setup (between dialing) 火曜日 午後3時44分 Switch selection and function USA Used to set the pause time of every pause input in dialing. The set range is 0 15 by binary input of N into "1sec x N" (1sec - 15sec). When 0 is selected, it is set to the default (2sec).
[06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 48 ページ 2004年10月26日 SW Bit No. No. Item 火曜日 午後3時44分 Switch selection and function USA 72 3,4 Upper limit of busy tone Used to set the upper limit of detection time (ON time) of busy tone signal detection time frequency. To count a busy tone signal as 1 pulse, it must be detected for less (ON time) than the set time. 3 4 750ms Bit No.
[06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 49 ページ 2004年10月26日 SW Bit No. No. Item 火曜日 午後3時44分 Switch selection and function USA 76 5,6 Upper limit of call signal Used to set the upper limit of wait time from pulse (number of times) detection OFF time of a call signal (CI) to the next CI signal pulse. When the next CI signal pulse is not detected within the set range, the number of calls until then is cleared. Bit No.
[06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 50 ページ 2004年10月26日 SW Bit No. No. From 81 To 100 Item 火曜日 午後3時44分 Switch selection and function USA Not used Initial value 0 0 0 0 0 0 0 0 101 1 Setup of text print in mail receive without attached file Used to set whether the mail text is printed or not when the received mail has no attached file. 1: Mail text is printed. 0 Not print 0: Mail text is not printed. 2-5 Not used 1 0 0 0 6 Used to set the serve check (MDN) function.
[06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 51 ページ 2004年10月26日 SW Bit No. No. 103 7 8 Item 火曜日 Switch selection and function Nighttime FAX mode setting Used to set whether the minimum low power consumption mode is set or not when the right power switch is turned off. However, this function is valid only when iFAX receive setting is not made.
[06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 52 ページ 2004年10月26日 SW Bit No. No. Item 火曜日 午後3時44分 Switch selection and function USA 108 1-8 Not used Initial value Key operator 0 0 0 0 0 0 0 1 109 1 Not used 2-6 iFAX paper exit tray setting 0 Used to specify the default output tray in the combination of each output system. The combinations of the output trays are as follows.
[07]MACHINEOPERATION.fm 1 ページ 2004年10月26日 火曜日 午後3時45分 [7] MACHINE OPERATION 1. Key operator program Set value(Default) KEY OPERATOR PROGRAM Engine section LCD Operation Default display setting.
[07]MACHINEOPERATION.
[07]MACHINEOPERATION.fm 3 ページ 2004年10月26日 火曜日 午後3時45分 3. Own number sending 4. Quick On-line This function prints the date, time, your programmed name, your programmed fax number, and the transmitted page number at the top center of each page that you fax. All pages that you fax include this information.
[07]MACHINEOPERATION.fm 4 ページ 2004年10月26日 火曜日 午後3時45分 5. Trouble codes * MAIN SUB F6 Only the FAX-related codes are extracted. 97 A. Details of trouble codes Content FAX-BOX incompatibility trouble The FAX-BOX PWB is not one for the ARFX12(FAX detection). Details The Modem controller PWB of the FAX-BOX is not for the AR-FX12. Cause Because the FAX-BOX modem controller PWB information (hard detection) is not for the AR-FX12. Check & Remedy Check the FAX-BOX modem controller PWB.
[07]MACHINEOPERATION.fm 5 ページ 2004年10月26日 火曜日 午後3時45分 MAIN SUB U2 00 22 23 50 Content EEPROM read/write error (ICU). Details Write error to EEPROM. Cause EEPROM trouble. Installation of EEPROM which is not initialized. ICU PWB EEPROM access circuit trouble. Check & Remedy Check that the EEPROM is properly set. To save the counter data/adjustment values, make notes of the counter/adjustment values with the simulation. Cancel the U2 trouble with SIM16. Replace the ICU PWB.
[07]MACHINEOPERATION.fm 6 ページ 2004年10月26日 火曜日 午後3時45分 B. Communication report codes This code is indicated in the column of protocol communication report in a communication repot table and a communication management table when communication is terminated. Communication report XX (YY ZZ) <1>Communication report code XX (Top 2 digits): 00 ~ 99 <2>Communication report sub code 1: YY: Not used in this machine. (Always 00) <3>Communication report sub code 2: ZZ: Indicates details of the report.
[07]MACHINEOPERATION.fm 7 ページ 2004年10月26日 Report code (Communication Display in the column of result result) 火曜日 午後3時45分 Content of communication interruption Means of communication 59 RX NO F-CODE POLL In F code polling (calling), the remote machine has no DIS bit 47 (polling function). In F code polling (calling), the called side has no send data. (DIS bit 9 is 0.)
60 NO F-CODE POLL In F code polling (calling), DCN is received for SEP. In bulletin board, there is no send data for SEP.
[07]MACHINEOPERATION.fm 8 ページ 2004年10月26日 火曜日 午後3時45分 Report code (Communication Display in the column of result result) Means of communication Content of communication interruption 86 RECEIVED In e-mail receive, an unsupported attached file is received. Only the TIFF-F type is supported for attached files. •The TIFF-F type of the attached file cannot be recognized. •There is no attached file. 87 NG87XXXX* In e-mail receive, an attached file cannot be stored in memory.
[07]MACHINEOPERATION.fm 9 ページ 2004年10月26日 火曜日 午後3時45分 (3) Communication report sub code Report code 2 01 Content of communication interruption Send/Receive Send length over Send 02 EOL time up Receive 03 Carrier detection time up Receive 04 Not used - 05 Time up in phase C (8 min) Send 06 Memory image decode error Receive 07 Memory image decode error Send 08 Time up between frames in phase C (Report code is 0 or 16.
[07]MACHINEOPERATION.fm Report code 2 10 ページ 2004年10月26日 火曜日 午後3時45分 Content of communication interruption 90 In e-mail receive, an attached file cannot be stored in memory. Memory overCannot be stored in memory. 91 In e-mail receive, an attached file cannot be stored in memory. The file size is too great to be stored in memory. 92 In SMTP e-mail receive, an attached file cannot be stored in memory. Cannot be stored in memory. *1: Does not occur in Tiger and Dragon.
/ 26PIN / 36PIN CTS1,TXD1,RTS1 RXD1,CTS2,TXD2 RTS2,RXD2,FAX_RESRES_MFP-,MSW_OFF VLED,FAX_VPP,CNCT_FAXFAX_PWON-,PRON_FAX- MFP controller (FAX I/F PWB) Connect the ROM socket ROM Emulator I/F PWB PARTNER-ET II (ROM Emulator) AR-FX12 ELECTRICAL SECTION 8-1 ROM_VPP Inverter RESETPFrom RESET circuit From RESET RESET circuit CNCT_FAX- MFP-I/F connector (All Signal) H-UDI connector for emulator RESET RESET circuit From RESET circuit RESET1-,RESET (GA work memory) SDRAM +5VS(F) To NIGHT TIME FAX
to MFP Control Unit 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 FXA7 FXA8 FXA9 FXA10 FXA11 FXA12 FXA13 FXA14 FXA15 FXA16 FXA17 FXA18 FXA19 FXA20 RES_MFP(NC) DG DG (NC) FMCS15 FMCS16 FXA22 FOE2 FWE2 (NC) DTXD0 DRTS0 DRXD0 DCTS0 RES_FAXCTXD1 CRTS1 CRXD1 CCTS1 CNCT
AR-FX12 ELECTRICAL SECTION 8-3 A 8 (3-7D,4-7C) (3-5D,4-3C) 3,4 3,4 7 FXA[2:22] FXD[0:31] 7 (5-7C) 5 4 3 TP71 FMCS15 FMCS16 6 5 FX_VCCW (5-7C) (5-6C) FAX_PWONPRON_FAX- 5 5 (5-7C) (3-7C,4-7B) (3-7B,4-7B) 1 1 1 1 RES_MFP- 1 TP70 3,4 FOE2 3,4 FWE2 TP72 2 DTXD0 (2-7C) 2 DRTS0 (2-7C) 2 DRXD0 (2-7C) 2 DCTS0 (2-7C) RES_FAX(5-7C) 5 2 CTXD1 (2-7B) 2 CRTS1 (2-7B) 2 CRXD1 (2-7B) 2 CCTS1 (2-7B) CNCT_FAX(5-7C) 5 TP73 TP74 5 FRDY (5-5C) MSW_MON(5-7C) 5 3,4 RD/BY(3-5C,4-7B) FRESET (3-5C,4-7B) 3,
AR-FX12 ELECTRICAL SECTION 8-4 A 1 1 (1-6C) (1-6C) 1 1 1 (1-6C) (1-6C) (1-6C) 1 1 (1-6C) (1-6C) 1 (1-6C) 8 CCTS1 CRXD1 CTXD1 CRTS1 DCTS0 DRXD0 DTXD0 DRTS0 +3.3V +3.3V 1 1 1 TP10 TP15 TP9 0 R12 4.7kJ R20 0 R18 TP43 TP50 1 TP31 0 1 1 TP32 TP36 1 1 6 18 14 1 10 1 TP38 15 12 13 6 5 4 1 C13 0.1uF-D C12 0.1uF-D 2 18 14 1 10 1 TP17 15 1 12 13 6 5 4 2 TP29 1 6 TP28 C2 0.1uF-D C1 0.1uF-D TP33 R19 4.
8 FOE2 FWE2 1,4 (1-5C,4-7B) FMCS16 1,4 1 FXA[2:22] (1-5C,4-7B) (1-5C) 1,4 7 R11 4.7kJ 6 6 1 43 72 1 1 TP40 TP42 TP48 11 1 TP39 AR-FX12 ELECTRICAL SECTION 8-5 1 20 30 39 44 46 47 42 40 12 13 14 15 16 17 18 28 31 32 29 33 34 36 65 66 67 68 69 70 71 41 1 TP45 FXA2 FXA3 FXA4 FXA5 FXA6 FXA7 FXA8 FXA9 FXA10 FXA11 FXA12 FXA13 FXA14 FXA15 FXA16 FXA17 FXA18 FXA19 FXA20 FXA21 FXA22 5 177827-1 GND GND GND GND OE WP WE 2CE 1CE N.C N.C N.
AR-FX12 ELECTRICAL SECTION 8-6 A FXA[2:22] 8 RD/BYFRESET 1 FMCS15 1,3 FOE2 1,3 FWE2 (1-6B,3-5C) 1,3 (1-6B,3-5C) 1,3 (1-6C) (1-6C,3-7C) (1-6C,3-7B) (1-7D,3-7D)1,3 4.7kJ 4.7kJ TP19 R2 +3.3V R8 +3.
1 1 8 1 RES_FAX- AR-FX12 ELECTRICAL SECTION 8-7 FAX_PWON- CNCT_FAX- MSW_MON- RES_MFP- PRON_FAX- 1005 1005 7 N.M C18 N.M C19 1005 1005 N.M C22 N.M C16 1005 6 N.M C20 (1-6B) 6 1005 1 N.M C23 FX_VCCW 5 TP76 5 1 1 ICP-S1.2 F1 4 2 4 FFVPPW (1-6B) 1 2 (5-5C) 2 (5-5C) 2 2 (5-5C) (5-5C) 2 (5-5C) 2 2 (5-5C) (5-5C) 2 (5-5C) 3 3 FRDY CTS1 RTS1 RXD1 TXD1 CTS0 RTS0 RXD0 TXD0 1005 N.
A B C D 2 8 R123 2.7kJ SR0 DG D5 RB751V40 RB751V40 D4 C15 C38 C17 C14 C42 C75 DG DG DG DG DG 7 DG EXTAL SCL SDA PTC2 PINT3 PTC4 NMI IRQ3- IRQMDM- ( 8 ) CRTS2 ( 8 ) CCTS2 ( 8 ) CRXD2 ( 8 ) CTXD2 R26 22J TP258 XTAL EXTAL +3.3V(F) +3.3V(F) TP103 TP104 TP128 TP165 TP149 TP148 TP147 TP32 TP44 TP7 TP17 TP49 TP74 TP46 TP47 TP45 TP91 TP225 TP275 TP234 TP224 TP226 DG 47J 47J TP93 TP129 TP92 TP105 TP73 R47 TP206 TP205 33J TP11 TP33 TP72 TP35 TP34 TP233 4.
A B C RD- WE0- ( 1,5 ) 8 ( 6,7,8 ) FAX_VPP CS0- ( 1,5 ) ( 1,3 ) (5) IORES2( 1 ) ROMRY/BY- +3.3V(F) 4.7kJ D ( 1,3,5 ) CD[0:31] 4.7kJ R205 ( 1,3,5 ) CA[1:23] 4.7kJ R25 R216 CA[1:23] CD[0:31] C129 0.
A B C D 1 (5) N.M 8 TRJ-TWE 2 CD[0:31] DG +3.3V(F) C130 47uF/25V DG +MDM1.8V C146 47uF/25V N.M RB751V40 D13 N.M RB751V40 DG +3.3V(F) N.M D14 TP80 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 R213 47KJ +3.3V(F) 3 BR35 47J(BR) BR42 47J(BR) BR43 47J(BR) BR47 47J(BR) 74LVX08 +3.3V(F) 2 1 IC6A NDPRD C140 1000pF(B) IORES0- ( 1 ) IRQMDM- ( 5 ) IOWR0( 5 ) IOWR1- TPW14 N.
A B SPSELA SPSELB (5) (5) 2 N.M 8 TR3 DTC143Z TR4 DTC143Z 2 2 R117 2.2kJ DG C55 4700pF(B) DG DG C39 SIGTX SIGRX TRJ-TWE DG DG 3 3 R82 R83 R80 7 R78 10kJ +12V(F) R79 10kJ +12V(F) 0.1uF(FILM) R84 100kJ +REF6V(F) R81 18kJ C157 1 10kJ R118 BZ (5) +12VS(F) 39kJ 9.1kJ 91kJ DG C97 N.M TPW13 AG +12V(F) 0.
A B C +3.3V(F) (7) 0.1uF C174 0.1uF C162 8 0.1uF C173 11 27 39 C159 0.01uF DG VSSQ VSSQ VSSQ VSSQ VSS VSS VSS VDD VDD VDD VDDQ VDDQ VDDQ VDDQ NC NC LDQM \WE \CAS \RAS \CS BA0 BA1 CKE CLK UDQM 87 93 N.M RB751V40 D16 N.M RB751V40 DG 78 DQ15 DQ14 DQ13 DQ12 DQ11 DQ10 DQ9 DQ8 DQ7 DQ6 DQ5 DQ4 DQ3 DQ2 DQ1 DQ0 A11 A10(AP) A9 A8 A7 A6 A5 A4 A3 A2 A1 A0 N.M D15 +3.
A B C D PICCK- +5VS(F) R158 10kJ PICDI- 8 ( 8 ) MSW_OFF ( 1 ) PICDO- (1) R116 1kJ +5VS(F) R114 1kJ R140 1kJ ( 4 ) CIDIN(CI Detect TEL PWB(OLD)) +3.3V(F) (5) ( 5 ) PICRES ( 2,7,8 ) FAX_VPP ( 5 ) PICVPP ( 5 ) FNETON (FNET Detect permission) ( 5 ) MWAIT (Sleep demand) R159 10kJ +5VS(F) ( 4 ) FNETD(1300Hz / detect Combination) CI(CI 10-75Hz) 2 3 4 3 DG 3 3 3 3 TR12 DTC143Z DG DG 7 10 IC19E 74HC14 DG 3 DG 2 13 2 R139 1kJ +5VS(F) 3 C100 0.
A B N.M TPW10 1 +5V(F) N.M MANRES- 8 +12V(F) N.M TRJ-TWE 2 TRJ-TWE 2 N.M DG TRJ-TWE 2 N.M DG 1 TPW6 1 N.M RESET- TPW5 DG C1012 TPW7 1 AG 1 2 3 4 5 6 1 2 3 4 5 6 +3.3V(F) DG B6P-VH TRJ-TWE 2 N.M CN8 Power supply connector R18 R17 4.7kJ +3.3V(F) 74LVX14 47J 5 7 DG +12VS(F) N.M 1 N.M 2 N.M DG DG 6 N.M 2 TRJ-TWE C186 1 +M3.3VA(F) +5VS(F) 10 9 5 DG AG DG N.M 2 8 5 DG RES OUT C170 DG R65 1kJ R66 1kJ 2 DG C27 0.
A B C CCTS2 CRXD2 (1) (1) 8 (5) RESMFP ( 6 ) PRON_FAX CTXD2 CRTS2 (1) (1) DTXD1 DRTS1 DCTS1 DRXD1 (5) (5) (5) (5) +3.3V(F) +3.3V(F) TP345 TP366 4.7kJ R40 R35 4.7kJ +3.3V(F) 47J 47J R102 R103 4.7kJ 4.7kJ R256 R257 C2+ 5 C46 TP81 7 TP97 TP118 TP96 TP117 DG +5VS(F) R1IN R2IN TD62503 COM-E N.
A B C MJ2-1 MJ2-6 CN2-16 MJ2-4 MJ2-3 CN2-12 CN2-15 MJ2-5 ARG ARG CP62 TEL2 8 BT1 BT2 S CP74 CP72 CP67 ARG ARG 7 C10 N.M 1000p/AC250V 12V 12V R20 HZS2C1 R11 HZS2C1 10 1/4W 91 1/4W EXHS 11 7 16 9 11 8 6 RY1 12 1 2 D1 N.M 1SS133 RY2 1 2 IC2 C37 N.M 3 0.1u 7 DG CP9 5V D11 JP JP1 6 C DG DG 1 4 REC1 S1ZB60 12VS Q23 DTC143ZKA 51k 1/4W R16 CP51 CP38 15k 1W CI D4 2 5 AG 0.
CN1-3 CN1-2 CN2-19 CN2-23 CN2-22 CN2-21 CN2-20 CN1-4 CN1-1 CP113 CP100 CP94 RX- RX+ 8 CP146 /RCVMUTE CP132 /VRSEL3 CP127 /VRSEL2 CP123 /VRSEL1 CP119 /MICMUTE TX- TX+ AG CP95 C N.M DTC143ZKA C N.M DTC143ZKA C R45 N.M 22k R33 N.M 22k R34 N.M 22k N.M DTC143ZKA C R38 N.M 22k C B 12V L2 N.M SBT0260 D2 N.M 1SS133 AG 7 IC5 BU4066B AG 0.1u N.M 0.1u 7 C48 14 D3 N.M 1SS133 C35 AG C6 DG CP148 L3 N.M CP147 N.M SBT0260 4.7u/50V DG + C23 N.
AR-FX12 ELECTRICAL SECTION 8-18 A B C D CN2-25 CN1-6 CN2-11 CN1-5 CN2-1 CN2-30 CN2-27 CN2-2 CN2-3 CN2-7 CN2-8 CN2-29 CN2-28 CN3-3 CN2-14 CN2-24 CN3-2 CN3-1 8 CP183 CP181 CP178 CP176 CP184 _DG /RHS JP3 N.M JP D14 DG DG C9 N.M 1000p(B) 7 5V 5V DG D5 N.M 1SS133 D6 R7 N.M N.M 1SS133 4.7k DG + C24 47u/25V AG + C45 47u/25V 12V 12VS N.M 1SS133 6 7 Q22 CP165 N.M DTC143ZKA C B CP162 RY5 N.M G6E-134P-US TP3 N.M SBT0260 L1 N.M R2 N.M 0 C8 N.
[08]ELECTRICALSECTION.fm 19 ページ 2004年10月26日 火曜日 午後3時46分 4.Part Layout A.
[08]ELECTRICALSECTION.fm 20 ページ 2004年10月26日 火曜日 午後3時46分 B.
[08]ELECTRICALSECTION.
[08]ELECTRICALSECTION.fm 22 ページ 2004年10月26日 火曜日 午後3時46分 C.
q PARTS GUIDE CODE :00ZARFX12/P1/ レーザープリンタ オプション FAX拡張キット 拡張キット DIGITAL LASER COPIRER/ PRINTER OPTION FAX EXPANSION KIT MODEL AR-FX12 CONTENTS 1 FAX BOX ユニット (FAX BOX UNIT) 2 梱包及び付属品 (Packing material&Accessories) 3 TEL/LIU 基板 (TEL/LIU PWB U)…JAPAN 4 TEL/LIU 基板 (TEL/LIU PWB U)…USA,CANADA 5 TEL/LIU 基板 (TEL/LIU PWB U)…EUROPE 6 TEL/LIU 基板 (TEL/LIU PWB U)…Australia,New Zealand 7 モデムコントロール基板 (Modem control PWB U) 8 FAX インターフェース基板 U(FAX interface PWB U) 9 FAX AC 電源基板 (FAX AC power supply
補修部品のランク付 市場における補修部品の在庫管理が、適正に運営出来る手助けとなることを、目的とします。 Aランク : メンテナンスパーツ、メンテナンスパーツには入っていないがメンテナンスパーツに近い消耗パーツ。 Bランク : 性能・機能パーツ(センサー、クラッチ等の電気パーツ) 、消耗パーツ。 Eランク : 基板含むユニットパーツ。 Dランク : 整備パーツ(外装、パッキング、同梱パーツ)。 Cランク : 上記ランク以外のパーツ(基板の子部品を除いたもの) 。 DEFINITION Rank Rank Rank Rank Rank A B E D C : : : : : Maintenance parts, and consumable parts which are not included in but closely related to maintenance parts Performance/function parts (sensors, clutches, and other electrical parts), consumable parts Unit parts includi
1 FAX BOX ユニット (FAX BOX UNIT) NO. PRICE RANK Ex. Ja. AA DD AC DD AB DD AA DD BR LX BR LX CB TX PARTS CODE LHLDW2087SCZZ LX-BZ0938FCZZ LX-WZ0443FCZZ XBPS726P08000 CPLTM5788FCE9 501 CPLTM5788FCF0 CPLTM5788FCF2 41 43 45 46 NEW MARK PART RANK C C C C E E E N N N N DESCRIPTION [Japan] ミニクランプ FAX ホルダービス アース用平ワッシャ ビス [Japan] FAX 電源ユニット [100V series] FAX 電源ユニット [200V series] FAX 電源ユニット Wire holder FAX holder screw Washer Screw(2.
2 梱包及び付属品 (Packing material & Accessories) NO.
3 TEL/LIU 基板 (TEL/LIU PWB U)…JAPAN NO. 1 2 3 4 5 6 ! ! PARTS CODE QCNCM1156FCZZ QCNCW1155FCZZ QJAKT0001FCZZ QJAKT0002FCZZ QSOCD0081FCZZ RCILZ0089FCZZ PRICE RANK Ex. Ja.
3 TEL/LIU 基板 (TEL/LIU PWB U)…JAPAN NO. PARTS CODE PRICE RANK Ex. Ja. AA DD AA DD AA DD AA DD AA DD AA DD AA DD AA DD AA DD AA DD AB DD AB DD AE DS AB DD AP EQ AF DS AK DX NEW MARK PART RANK C C C C C C C C C C C C B B B B B DESCRIPTION VSDTC143ZKA-1 AC DJ B VSDTC143ZKA-1 (Unit) 901 CPWBN1619FCE1 AC DJ B Resistor(1/16W 3.3KΩ ±5%) [R19] Resistor(1/16W 36KΩ ±5%) [R47] Resistor(1/16W 3.9KΩ ±5%) [R55] Resistor(1/16W 39KΩ ±5%) [R18] Resistor(1/16W 4.7KΩ ±5%) [R7] Resistor(1/16W 5.
4 TEL/LIU 基板 (TEL/LIU PWB U)…USA,CANADA NO. PARTS CODE VRS-CZ1JD103J VRS-CZ1JD113F VRS-CZ1JD113J VRS-CZ1JD153J VRS-CZ1JD183J VRS-CZ1JD223F VRS-CZ1JD223J VRS-CZ1JD272J VRS-CZ1JD273J VRS-CZ1JD332J VRS-CZ1JD364J VRS-CZ1JD512F VRS-CZ1JD621F VRS-CZ1JD621J VRS-RA3AA153J VS2SA1807-P-1 VS2SC2412KS-1 VS2SC3415-P-1 VS2SD1266A0-1 VS2SD592A-S-1 VSDTC143ZKA-1 (Unit) 901 CPWBN1619FCE2 52 53 54 55 56 57 58 59 60 61 62 64 66 67 68 69 70 71 72 73 74 PRICE RANK Ex. Ja.
5 TEL/LIU 基板 (TEL/LIU PWB U)…EUROPE NO. PARTS CODE PRICE RANK Ex. Ja.
6 TEL/LIU 基板 (TEL/LIU PWB U)…Australia,New Zealand NO. 36 37 38 39 40 41 42 43 44 45 47 48 49 50 51 52 53 54 55 PARTS CODE VHEMTZJ4R7B-1 VHEMTZJ6R8B-1 VHIBU4066BCF1 VHINJM3414M-1 VHINJM4558MF1 VHITHS56F//-1 VHPTLP621-1GB VHPTLP627//-1 VHVDSS-401M// VHVDSS301L/-1 VRD-HT2EY100J VRD-HT2EY103J VRD-HT2EY150J VRD-HT2EY163J VRD-HT2EY181J VRD-HT2EY301J VRD-HT2EY332J VRD-HT2EY513J VRS-CZ1JD000J PRICE RANK Ex. Ja.
7 モデムコントロール基板 (Modem control PWB U) NO. 1 2 3 4 6 7 PARTS CODE QCNCM1069ACZZ QCNCM7014SC0B QCNCM7014SC0C QCNCW1155FCZZ QSOCN0082FCZZ QSOCZ0094FCPZ PRICE RANK Ex. Ja.
7 モデムコントロール基板 (Modem control PWB U) NO. PARTS CODE PRICE RANK Ex. Ja.
8 FAX インターフェース基板 U(FAX interface PWB U) NO. 1 2 3 4 5 6 7 8 9 10 11 12 901 PARTS CODE QCNCW1180FCZZ QSOCN0082FCZZ QSOCZ0092FCZZ RC-KZ0008QCZZ VCEASM1CM106M VCKYCZ1CF104Z VHILHF80J01-1 VHIMAX3225E-1 VHVICPS1.2/-1 VRS-CZ1JD000J VRS-CZ1JD000J VRS-CZ1JD101J VRS-CZ1JD101J VRS-CZ1JD101J VRS-CZ1JD101J VRS-CZ1JD472J (Unit) CPWBX1640FCE1 PRICE RANK Ex. Ja.
9 FAX AC 電源基板 (FAX AC power supply unit)…100V series NO.
9 FAX AC 電源基板 (FAX AC power supply unit)…100V series NO.
F FAX AC 電源基板 (FAX AC power supply unit)…200V series NO.
F FAX AC 電源基板 (FAX AC power supply unit)…200V series NO.
F FAX AC 電源基板 (FAX AC power supply unit)…200V series NO. ! ! PARTS CODE 0FT35866337// 0FT33673027// 0FT23671666// 0FT23665429// 0FT33603762// 0FT33331673// 0FT23314081// 0FT23379450// 0FT23379450// 0FT23432963// 0FT33461429// 0FT33461437// 0FT33525117// 0FT33693842// 0FT33213581// 0FT33676877// 0FT23423816// 0FT33730969// (Unit) 901 RDENC0031FCZZ 167 168 169 170 171 172 173 174 175 176 178 179 180 181 182 183 184 185 PRICE RANK Ex. Ja.
■ 索引 (Index) PARTS CODE [C] CPLTM5788FCE9 CPLTM5788FCF0 CPLTM5788FCF2 CPWBN1619FCE1 " CPWBN1619FCE2 " CPWBN1620FCE1 " CPWBX1618FCE1 " CPWBX1640FCE1 " [D] DHAI-3027FCAZ DHAI-3204FC11 DHAI-3206FC11 DHAI-3207FC11 DHAI-3297FCZZ DHAI-3298FCZZ DHAI-3418FCZZ DHAI-3444FCZZ DHAI-3446FCAZ DUNT-7136FCA1 [G] GCAB-0946FCZ2 GCAB-0946FCZ3 GCAB-0947FCZZ [L] LBSHZ1001ACZZ LBSHZ2050SCZZ LFIX-0560FCZZ LFIX-0567FCZZ LHLDW1499FCZZ LHLDW2087SCZZ LHLDZ1493FCZZ LHLDZ1494FCZZ LPLTM5787FCZZ LPLTM5788FCZZ LPLTM5789FCZZ LPLTM5892FCZ
PARTS CODE TINSE2786FCZZ TINSE2787GHZZ TINSE2791FCZZ TINSF2789GHZZ TINSG2788GHZZ TINSJ2785FCZZ TINSW2790GHZZ [V] VCCCCZ1EH151J VCCCCZ1EH221J " " " VCCCCZ1HH100D VCCCCZ1HH101J " " VCEASM1CM106M " VCEASM1EM107M VCFYDA1HA104J VCFYDA1HA105J " VCFYDA1HA334J VCFYDA1HA474J VCFYJU2AA824K VCFYJU2EA105K " " VCFYJU2EA474K VCFYJU2EA824K " VCFYJU2GA473K VCKYCZ1AB104K " VCKYCZ1AB273K VCKYCZ1AB333K VCKYCZ1AB473K " VCKYCZ1AB683K " " VCKYCZ1AF224Z VCKYCZ1CB103K VCKYCZ1CF104Z " " " VCKYCZ1EB472K VCKYCZ1HB102K " " VCKYCZ1HB18
PARTS CODE VRD-HT2EY113J VRD-HT2EY120J VRD-HT2EY123J VRD-HT2EY124J " VRD-HT2EY150J " VRD-HT2EY163J VRD-HT2EY181J " VRD-HT2EY183J " VRD-HT2EY202J VRD-HT2EY224J " VRD-HT2EY300J " VRD-HT2EY301J VRD-HT2EY302J VRD-HT2EY303J " VRD-HT2EY332J " VRD-HT2EY471J VRD-HT2EY472J VRD-HT2EY474J VRD-HT2EY513J " " VRD-HT2EY751J VRD-HT2EY910J " VRS-CZ1JD000J " " " " " VRS-CZ1JD101J " VRS-CZ1JD102J " " VRS-CZ1JD103J " " " " VRS-CZ1JD104J " " " VRS-CZ1JD112J VRS-CZ1JD113F " VRS-CZ1JD113J " " " VRS-CZ1JD122J " VRS-CZ1JD123J VRS-C
PARTS CODE VS2SD592A//-1 VS2SD592A-S-1 " VSDTA114EUA-1 VSDTC143ZKA-1 " " " VSDTC143ZUA-1 [X] XBBS740P06000 XBPS726P08000 " XEBS730P10000 XEBS730P12000 XHBS730P06000 XHBS740P06000 [0] 0FT14365100// 0FT23040224// 0FT23042251// 0FT23075095// " 0FT23095657// " " " " " " 0FT23124819// 0FT23124827// 0FT23194310// 0FT23204782// 0FT23204790// " 0FT23241823// " 0FT23259382// 0FT23259420// 0FT23259447// 0FT23259498// " " 0FT23287629// " 0FT23287637// " 0FT23287696// " 0FT23287823// 0FT23314081// " 0FT23319431// " " "
PARTS CODE NO.
PARTS CODE NO.
CAUTION FOR BATTERY REPLACEMENT (Danish) ADVARSEL ! Lithiumbatteri - Eksplosionsfare ved fejlagtig håndtering. Udskiftning må kun ske med batteri af samme fabrikat og type. Levér det brugte batteri tilbage til leverandoren. (English) Caution ! Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to manufacturer's instructions.
[00]COVER.
[00]COVER.fm 3 ページ 2004年10月26日 火曜日 午後3時41分 COPYRIGHT c 2004 BY SHARP CORPORATION All rights reserved. Printed in Japan. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of the publisher. Trademark acknowledgments Windows and Windows NT are trademarks of Microsoft Corporation in the U.S.A. and other countries.