NA S1 ZZ AL-2030_2040CS.
AL-2030_2040CS.book 1 ページ 2007年4月6日 金曜日 午前11時32分 FOR YOUR PROTECTION... To aid in reporting this unit in case of loss or theft, please record below the model number and serial number located on the back of the unit. We also suggest you record all the information listed and retain for future reference.
AL-2030_2040CS.book 1 ページ 2007年4月6日 金曜日 午前11時32分 CAUTIONS Caution label on the unit The label ( , ) in the fusing area of the unit indicates the following: : Caution, risk of danger : Caution, hot surface Cautions on using Follow the cautions below when using this unit. Warning: • The fusing area is hot. Exercise care in this area when removing misfed paper. • Do not look directly at the light source. Doing so may damage your eyes. Caution: • Place the unit on a firm, level surface.
AL-2030_2040CS.book 2 ページ 2007年4月6日 金曜日 午前11時32分 Trademark acknowledgements • Microsoft®, Windows®, Windows® 98, Windows® Me, Windows® 2000, Windows® XP and Internet Explorer® are registered trademarks or trademarks of Microsoft Corporation in the U.S.A. and other countries. • Adobe®, the Adobe® logo, Acrobat®, the Adobe® PDF logo, and ReaderTM are registered trademarks or trademarks of Adobe Systems Incorporated in the United States and other countries.
AL-2030_2040CS.book 3 ページ 2007年4月6日 金曜日 午前11時32分 CONTENTS 1 INTRODUCTION USING THE MANUALS ................. 4 PART NAMES ................................ 5 OPERATION PANEL...................... 6 2 SETTING UP THE UNIT SETUP PROCEDURE ................... 7 CHECKING PACKED COMPONENTS AND ACCESSORIES ............................. 8 PREPARING THE UNIT FOR INSTALLATION .............................. 8 INSTALLING THE TD CARTRIDGE .......................... 10 POWER ON .................................
AL-2030_2040CS.book 4 ページ 1 2007年4月6日 金曜日 午前11時32分 INTRODUCTION This chapter provides basic information for using the unit. USING THE MANUALS In addition to this printed manual an online manual is also provided. To get full use of all features and functions of this product, be sure to familiarize yourself with both manuals. This printed manual provides all installation and setup instructions as well as instructions in the use of all copier functions.
AL-2030_2040CS.
AL-2030_2040CS.book 6 ページ 2007年4月6日 金曜日 午前11時32分 OPERATION PANEL 1 2 3 4 Original to copy key and indicators* Two-sided copies from one-sided originals. Turn on Long Edge or Turn on Short Edge can be selected. Exposure mode selector key and indicators Use to sequentially select the exposure modes: AUTO, MANUAL or PHOTO. Selected mode is shown by a lit indicator. (p.49) Light and dark keys and indicators Use to adjust the MANUAL or PHOTO exposure level.
AL-2030_2040CS.book 2 7 ページ 2007年4月6日 金曜日 午前11時32分 SETTING UP THE UNIT Follow the installation procedure below to use the unit properly. If the unit does not function properly during setup or use, or if a function cannot be used, see "TROUBLESHOOTING THE UNIT" (p.61). SETUP PROCEDURE 2 When using the unit for the first time, setup the unit following the procedure shown below. 1 Open the package, and make sure that all the accessories are supplied with the unit. (p.
AL-2030_2040CS.book 8 ページ 2007年4月6日 金曜日 午前11時32分 CHECKING PACKED COMPONENTS AND ACCESSORIES Open the carton and check if the following components and accessories are included. If anything is not included or is damaged, contact our Technical Assistance Department at 1-(630)378-3590 in the USA.
AL-2030_2040CS.book 2 9 ページ 2007年4月6日 金曜日 午前11時32分 Remove all pieces of tape shown in the illustration below. Then open the SPF and remove protective materials. After that, take out the bag containing the TD cartridge. 2 AL-2040CS AL-2030 3 Release the scan head locking switch. The scan head locking switch is under the document glass. If the switch is locked ( ), the unit will not operate. Unlock the switch ( as shown below. ) Grasp here and turn in the direction of the arrow.
AL-2030_2040CS.book 10 ページ 2007年4月6日 金曜日 午前11時32分 INSTALLING THE TD CARTRIDGE 1 Open the multi-bypass tray, and then open the side cover. 2 Remove the CAUTION tape from the front cover and remove the two protective pins from the fusing unit by pulling the strings upward one at a time. Protective pins CAUTION tape 3 Push gently on both sides of the front cover to open the cover. 4 Remove the TD cartridge from the bag. Remove the protective paper.
AL-2030_2040CS.book 11 ページ 2007年4月6日 金曜日 5 Gently insert the TD cartridge until it locks in place while pushing the lock release button. 6 Close the front cover and then the side cover by pressing the round projections near the side cover open button. 午前11時32分 Lock release button 2 When closing the covers, be sure to close the front cover securely and then close the side cover. If the covers are closed in the wrong order, the covers may be damaged.
AL-2030_2040CS.book 12 ページ 2007年4月6日 金曜日 午前11時32分 POWER ON Ensure that the power switch of the unit is in the OFF position. Plug the other end of the power cord into the nearest outlet. Turn the power switch on the left side of the unit to the "ON" position. The start ( ) indicator will light up and other indicators which show the initial settings of the operation panel will also light up to indicate the ready condition. For the initial settings, see "Initial settings of operation panel" (p.13).
AL-2030_2040CS.book 13 ページ 2007年4月6日 金曜日 午前11時32分 Initial settings of operation panel When the unit power is on, the operation panel will revert to the initial settings when the time set with the "Auto clear time" setting (p.55) elapses after a job is finished, or when the clear key is pressed twice. The initial settings of the operation panel are shown below. 2 "0" is displayed in the display. When copying has begun in this state, the settings in the following table are used.
AL-2030_2040CS.book 14 ページ 3 2007年4月6日 金曜日 午前11時32分 LOADING PAPER Follow the steps below to load paper into the tray. PAPER For best results, use only paper recommended by SHARP. Type of paper feeding Type of media Size Weight Paper tray Standard paper Letter (8-1/2" x 11") Legal (8-1/2" x 14") Invoice (5-1/2" x 8-1/2") 15 lbs. to 21 lbs. (56g/m2 to 80g/m2) Multi-bypass tray Standard paper and thick paper Letter (8-1/2" x 11") Legal (8-1/2" x 14") Invoice (5-1/2" x 8-1/2") 14 lbs. to 34.
AL-2030_2040CS.book 15 ページ 2007年4月6日 金曜日 午前11時32分 LOADING THE PAPER TRAY 1 Raise the handle of the paper tray and pull the paper tray out until it stops. 2 Remove the pressure plate lock. Rotate the pressure plate lock in the direction of the arrow to remove it while pressing down the pressure plate of the paper tray. 3 3 Store the pressure plate lock which has been removed in step 2. To store the pressure plate lock, rotate the lock to fix it on the relevant location.
AL-2030_2040CS.book 5 16 ページ 2007年4月6日 金曜日 午前11時32分 Fan the paper and insert it into the tray. Make sure the edges go under the corner hooks. Do not load paper above the maximum height line ( the line will cause a paper misfeed. 6 ). Exceeding Gently push the paper tray back into the unit. • Be sure that paper is free of rips, dust, wrinkles, and curled or bent edges. • Make sure all the paper in the stack is the same size and type.
AL-2030_2040CS.book 17 ページ 2007年4月6日 金曜日 午前11時32分 BYPASS FEED (including special paper) The multi-bypass tray can be used to feed standard paper, transparency film, labels, envelopes, and other special purpose paper. Paper measuring from 3-1/2" x 5-1/2" to 8-1/2" x 14" and in the weight range of 14 lbs. to 34.5 lbs. (52g/m2 to 128g/m2) can be used in this tray. (For paper weighing from 28 lbs. to 34.5 lbs. (105g/m2 to 128g/m2), 8-1/2" x 11" is the maximum size.
03-Paper.fm 2 18 ページ 2007年4月6日 金曜日 午後5時4分 Set the paper guides to the paper width. Insert the paper (print face down) all the way into the multi-bypass tray. Print face • Paper must be fed narrow side into the feed slot. • Special papers such as transparency film, labels, and envelopes must be fed one sheet at a time through the multi-bypass tray. • When copying onto transparency film, remove each copy promptly. Do not let copies stack up.
AL-2030_2040CS.book 4 19 ページ 2007年4月6日 金曜日 午前11時32分 INSTALLING THE SOFTWARE This chapter explains how to install and configure the software that is required for the printer and scanner functions of the machine. The procedure for viewing the Online Manual is also explained. • The scanner function is only available on the AL-2040CS. • The screen images in this manual are mainly for Windows XP. With other versions of Windows, some screen images may be different from those in this manual.
AL-2030_2040CS.book 20 ページ 2007年4月6日 金曜日 午前11時32分 BEFORE INSTALLATION Hardware and software requirements Check the following hardware and software requirements in order to install the software. Computer type IBM PC/AT or compatible computer equipped with a USB 2.0/1.
AL-2030_2040CS.book 21 ページ 2007年4月6日 金曜日 午前11時32分 INSTALLING THE SOFTWARE • If you need to use a different connection method after installing the software using a USB or network connection, you must first uninstall the software and then install it using the new connection method. • In the following explanations it is assumed that the mouse is configured for right hand operation. • The scanner function only works when using a USB cable.
AL-2030_2040CS.book 22 ページ 2007年4月6日 金曜日 AL-2030 AL-2040CS 7 To install all of the software, click the "Standard" button and go to step 12. To install particular packages, click the "Custom" button and go to next step. 7 To install all of the software, click the "Standard" button and go to step 12. To install particular packages, click the "Custom" button and go to next step. 8 Click the "Printer Driver" button. 8 Click the "MFP Driver" button.
AL-2030_2040CS.book 23 ページ 2007年4月6日 金曜日 午前11時32分 AL-2030 9 Select "Connected to this computer" and click the "Next" button. AL-2040CS 9 The files required for installation of the MFP driver are copied. Follow the on-screen instructions. When "The installation of the SHARP software is complete." appears, click the "OK" button. Follow the on-screen instructions. When "The installation of the SHARP software is complete." appears, click the "OK" button and go to step 12.
AL-2030_2040CS.book 24 ページ 2007年4月6日 金曜日 午前11時32分 In Windows 98/Me/2000, if the following screen appears, click the "Skip" button or the "Continue" button as appropriate to continue the Sharpdesk installation. If "Skip" is selected, the Sharpdesk installation will continue without installing Sharpdesk Imaging. If "Continue" is selected, Sharpdesk Imaging will be installed. If Imaging for Windows is installed on your computer, Sharpdesk Imaging will overwrite Imaging for Windows.
AL-2030_2040CS.book 25 ページ 2007年4月6日 金曜日 午前11時32分 Connecting a USB cable Follow the procedure below to connect the machine to your computer. A USB cable for connecting the machine to your computer is not included with the machine. Please purchase the appropriate cable for your computer. • USB is available with a PC/AT compatible computer that was originally equipped with USB and had Windows 98, Windows Me, Windows 2000 Professional, Windows XP Professional or Windows XP Home Edition preinstalled.
AL-2030_2040CS.book 26 ページ 2007年4月6日 金曜日 午前11時32分 5 Double-click the "setup" icon ( 6 The "SOFTWARE LICENSE" window will appear. Make sure that you understand the contents of the software license, and then click the "Yes" button. ) You can show the "SOFTWARE LICENSE" in a different language by selecting the desired language from the language menu. To install the software in the selected language, continue the installation with that language selected.
AL-2030_2040CS.book 27 ページ 2007年4月6日 金曜日 午前11時32分 • The "Ethernet Address" is indicated on the left side of the machine near the LAN connector. • If the machine is used on a different network after the IP address is set, the machine will not be recognized. Enter the Ethernet Address and click the "Initialize" button to initialize the IP address. Follow the on-screen instructions to click the "OK" button and then the "Search" button. 10 Enter the IP address, subnet mask, and default gateway.
AL-2030_2040CS.book 9 28 ページ 2007年4月6日 金曜日 午前11時32分 Read the message in the "Welcome" window and then click the "Next" button. 10 Select "LPR Direct Print" and click the "Next" button. 11 The printer or printers connected to the network will be detected. Click the printer to be configured (the machine) and click the "Next" button.
AL-2030_2040CS.book 29 ページ 2007年4月6日 金曜日 午前11時32分 14 Select the port you want to use with the machine, and click the "Next" button. 15 Select whether or not you wish the printer to be your default printer and click the "Next" button. Follow the on-screen instructions. If you are running Windows 2000/XP and a warning message appears regarding the Windows logo test or digital signature, be sure to click "Continue Anyway" or "Yes". 16 When "The installation of the SHARP software is complete.
AL-2030_2040CS.book 30 ページ 2007年4月6日 金曜日 3 Click the "Printer Driver" button. 4 Select "Connected via the network" and click the "Next" button. 5 Click the "Add Network Port" button. 6 Select the network printer that is shared and click the "OK" button. Click the "Display Readme" button to show information on packages that are selected. Ask your network administrator for the server name and printer name of the machine on the network.
AL-2030_2040CS.book 7 31 ページ 2007年4月6日 金曜日 午前11時32分 In the printer port selection window, verify the network printer that is shared and whether the machine is to be used as the default printer, make the selections and click the "Next" button. Follow the on-screen instructions. If you are running Windows 2000/XP and a warning message appears regarding the Windows logo test or digital signature, be sure to click "Continue Anyway" or "Yes". 8 You will return to the window of step 3.
AL-2030_2040CS.book 32 ページ 2007年4月6日 金曜日 午前11時32分 3 Select "Shared Printer" and click the "Next" button. 4 For the port to be used, select the machine set as a shared printer, and click the "Next" button. You can also click the "Add Network Port" button and select the printer to be shared (the machine) by browsing the network in the window that appears. If the shared printer does not appear in the list, check the settings in the printer server. 5 Follow the on-screen instructions.
AL-2030_2040CS.book 33 ページ 2007年4月6日 金曜日 午前11時32分 INDICATORS ON THE OPERATION PANEL The ONLINE indicator and the start ( scanner. ) indicator indicate the state of the printer or SCAN indicator ONLINE indicator Start indicator Power save indicator Start indicator On: Indicates the unit is ready for copying or scanning is being performed. Blinking: The indicator blinks in the following situations: • When a print job is interrupted. • When reserving a copy job.
AL-2030_2040CS.book 34 ページ 2007年4月6日 金曜日 午前11時32分 USING THE PRINTER MODE For problems with the printer function, see the online manual or the help file for the driver. Opening the printer driver from the start menu Open the printer driver setup screen by the method shown below. 1 Click the "start" button. 2 Click "Control Panel", select "Printers and Other Hardware", and then click "Printers and Faxes". On Windows 98/Me/2000, select "Settings" and click "Printers".
AL-2030_2040CS.book 35 ページ 2007年4月6日 金曜日 午前11時32分 How to print 1 Make sure that the paper of the desired size and type is loaded in the tray. The procedure for loading paper is the same as for loading copy paper. See "LOADING PAPER" (p.14). 2 Open the document you intend to print, and select "Print" from the application's "File" menu. 3 Make sure that "SHARP AL-xxxx" is selected as the current printer.
AL-2030_2040CS.book 36 ページ 2007年4月6日 金曜日 午前11時32分 USING THE SCANNER MODE (AL-2040CS only) The scanner driver for this unit includes an STI (Still image) driver and WIA (Windows Image Acquisition) driver. You can install software that supports the STI driver and WIA driver to enable scanning using the operation panel of the unit. For problems with the scanner function, see the online manual or the help file for the driver.
AL-2030_2040CS.book 37 ページ 2007年4月6日 金曜日 午前11時32分 Windows 98/Me/2000 To scan directly into an application using the Button Manager on Windows 98, Windows Me and Windows 2000. Set the Event Manager properties to send only to Button Manager as shown below. 1 Click the "Start" button, select "Control Panel" from "Settings", and open "Scanners and Cameras" in start menu.
AL-2030_2040CS.book 38 ページ 2007年4月6日 金曜日 午前11時32分 Scan Button Destination Setting Dialog Box After you have completed the Button Manager settings in Windows, configure the scan settings in Button Manager. To configure the scan settings in Button Manager, right click the ( ) icon in the Taskbar and select "Setting" from the menu that appears. For details on configuring the scan settings in Button Manager, see the online manual or the help file.
AL-2030_2040CS.book 39 ページ 2007年4月6日 金曜日 午前11時32分 Flow of the Button Manager setting The Button Manager can directly handle an AL-2040CS device event and start your selected application according to the scan setting made on the AL-2040CS operation panel (SC1, SC2, SC3, SC4, SC5, SC6). This will scan directly into your application from the device. Scanner AL-2040CS SCAN key pressed. Event Manager Button Manager Windows OS No Selection dialog is displayed.
AL-2030_2040CS.book 40 ページ 2007年4月6日 金曜日 午前11時32分 All About The Windows Event Manager and scanner events in Windows 98, Windows Me, Windows 2000 and Windows XP. Windows Platforms provide a mechanism for software to handle external events for a scanner device like the SHARP AL-2040CS products. This mechanism is controlled by the device manager on a device basis.
AL-2030_2040CS.book 41 ページ 2007年4月6日 金曜日 午前11時32分 Using the SCAN key to begin scanning • Scanning is not possible during a copy job. ) key is pressed during a print job, the scan job will be • If the SCAN ( stored. • When scanning an original that has been placed in the SPF, only one original can be placed unless you are using Sharpdesk. 1 Press the SCAN ( ) key. The unit enters scan mode. 2 Place the original you wish to scan on the document glass/SPF.
AL-2030_2040CS.book 4 42 ページ 2007年4月6日 Press the start ( 金曜日 午前11時32分 ) key. Scanning will start and the scanned data will be transferred to the application. • If the following screen appears, select Button Manager and click "OK". Button Manager starts and the application associated with Button Manager starts. If you want only Button Manager to start in this case, set up Button Manager for use in Windows as explained in "Setting up the Button Manager" (p.36).
AL-2030_2040CS.book 43 ページ 2007年4月6日 金曜日 午前11時32分 Using the SHARP TWAIN 1 Place the original(s) you wish to scan on the document glass/SPF. For the procedure for placing the original, see "ORIGINAL PLACEMENT" (p.47). 2 After starting Sharpdesk, click the "File" menu and select "Select Scanner". 3 Select "SHARP MFP TWAIN P", and click the "Select" button. If you use more than one scanning device, select the scanner you want to use through the application.
AL-2030_2040CS.book 44 ページ 2007年4月6日 金曜日 午前11時32分 Scanning with the "Scanner and Camera Wizard" in Windows XP Windows XP includes as a standard feature an image scanning function. The procedure for scanning with the "Scanner and Camera Wizard" is explained here. To cancel scanning, click the "Cancel" button in the screen that is displayed. 1 Place the original you wish to scan on the document glass/SPF.
AL-2030_2040CS.book 45 ページ 2007年4月6日 金曜日 午前11時32分 HOW TO USE THE ONLINE MANUAL The online manual provides detailed instructions for operating the unit as a printer or scanner and a list of methods for dealing with printing or scanner problems. To access the online manual, your computer must have Acrobat Reader 6.0 or a later version. 1 Turn on your computer. 2 Insert the supplied CD-ROM into your CD-ROM drive. 3 Click the "start" button, click "My Computer" ( double-click the CD-ROM ( ) icon.
AL-2030_2040CS.book 46 ページ 5 2007年4月6日 金曜日 午前11時32分 MAKING COPIES This chapter explains basic and other copying functions. The unit is equipped with a one-page memory buffer. This memory allows the unit to scan an original once only and make up to 99 copies. This feature improves workflow, reduces operation noise from the copier, and provides higher reliability by reducing wear and tear on the scanning mechanism. COPY FLOW 1 Make sure that paper has been loaded in the paper tray (p.
AL-2030_2040CS.book 47 ページ 2007年4月6日 金曜日 午前11時32分 • If you start a print job while a copy job is in progress, the print job will begin when the copy job is completed. • The scanning function cannot be used while a copy job is in progress.
AL-2030_2040CS.book 48 ページ 2007年4月6日 金曜日 午前11時32分 Using the SPF The SPF is designed to hold up to 50 originals measuring from 5-1/2" x 8-1/2" to 8-1/2" x 14" and weighting from 14 lbs. to 23.9 lbs. (52g/m2 to 90g/m2). • Before feeding originals in the document feeder tray, be sure to remove any staples or paper clips from them. • Before placing curled or wavy originals into the document feeder tray, be sure to flatten them. If not, original misfeeds may result.
AL-2030_2040CS.book 49 ページ 2007年4月6日 金曜日 午前11時32分 SET THE COPY QUANTITY Set the number of copies using the two copy quantity ( from the document glass or copying from SPF. , ) keys when copying • Press the clear key to clear an entry if a mistake is made. • A single copy can be made with the initial setting, i.e., when "0" is displayed. • Press the right copy quantity key to set the unit digit from 0 to 9. This key will not change the tens digit.
AL-2030_2040CS.book 50 ページ 2007年4月6日 金曜日 午前11時32分 Automatic exposure adjustment This automatic exposure level will remain in effect until you change it again by this procedure. The automatic exposure level can be adjusted to suit your copying needs. This level is set for copying from the document glass and copying from the SPF respectively.
AL-2030_2040CS.book 51 ページ 2007年4月6日 金曜日 午前11時32分 REDUCTION/ENLARGEMENT/ZOOM Three preset reduction ratios and two enlargement ratios can be selected. The zoom function enables copy ratio selection from 25% to 400% in 1% increments. (When the SPF is being used, the zoom copy ratio range is 50% to 200%.) 1 Set the original and check the paper size. 2 Use the copy ratio selector key and/or ZOOM ( select the desired copy ratio.
AL-2030_2040CS.book 52 ページ 6 2007年4月6日 金曜日 午前11時32分 SPECIAL FUNCTIONS This chapter describes the special functions of this unit. Use these functions as needed. TWO SIDED COPYING (AL-2040CS only) When copying from one-sided originals to two-sided copies, copying orientation can be selected between Turn on Long Edge and Turn on Short Edge. When making two-sided copies, the multi-bypass tray cannot be used.
AL-2030_2040CS.book 53 ページ 2007年4月6日 金曜日 午前11時32分 Making two-sided copies 1 Place the original(s) on the document glass or in the SPF. (see "ORIGINAL PLACEMENT" (p.47). 2 Select two-sided copy mode. When copying in a one-sided to two-sided mode: Use the original to copy key to select the desired one-sided to two-sided copying mode (Turn on Long Edge or Turn on Short Edge). See the illustrations on page 52. 3 Select the copy settings. See "SET THE COPY QUANTITY" (p.
AL-2030_2040CS.book 54 ページ 2007年4月6日 金曜日 午前11時32分 DESCRIPTION OF OTHER SPECIAL FUNCTIONS Toner save mode Reduces toner consumption by approximately 10%. Power save modes The unit has two power save modes of operation: preheat mode and auto power shut-off mode. Preheat mode When the unit enters the preheat mode, the power save ( ) indicator will light up and other indicators will remain on or off as before.
AL-2030_2040CS.book 55 ページ 2007年4月6日 金曜日 午前11時32分 3 To enter the toner save mode, press the light ( ) key. The light and dark indicator marked "1" will light up, indicating the toner save mode is selected. 4 Press the exposure mode selector key. The PHOTO ( ) indicator will stop blinking and light up steadily. The light and dark indicator marked "3" will light up. The toner save mode is now active.
AL-2030_2040CS.book 56 ページ Program No. 2007年4月6日 金曜日 午前11時32分 Mode Parameters 6 SPF automatic original discharge time 1 3 5 5 min., *2 30 min., 60 min., 4 120 min., 240 min.
AL-2030_2040CS.book 7 57 ページ 2007年4月6日 金曜日 午前11時32分 MAINTENANCE This chapter describes how to replace the TD cartridge and drum cartridge and how to clean the unit. Be sure to use only genuine SHARP parts and supplies. TD CARTRIDGE REPLACEMENT The TD cartridge replacement required ( ) indicator will light up when toner is needed. For more information on purchasing the TD cartridge, see "ABOUT SUPPLIES AND OPTIONS" (p.71).
AL-2030_2040CS.book 4 58 ページ 2007年4月6日 金曜日 午前11時32分 Close the front cover and then the side cover by pressing the round projections near the side cover open button. The indicator ( ) will go out and the start ( ) indicator will light up. When closing the covers, be sure to close the front cover securely and then close the side cover. If the covers are closed in the wrong order, the covers may be damaged. DRUM CARTRIDGE REPLACEMENT The useful life of the drum cartridge is approximately 18,000 copies*.
AL-2030_2040CS.book 59 ページ 2007年4月6日 金曜日 午前11時32分 4 Gently install the TD cartridge. To install the TD cartridge, see step 5 in "INSTALLING THE TD CARTRIDGE" (p.11). 5 Close the front cover and then the side cover by pressing the round projections near the side cover open button. The drum replacement required ( ) indicator will go out and the start ( indicator will light up. ) When closing the covers, be sure to close the front cover securely and then close the side cover.
AL-2030_2040CS.book 60 ページ 2007年4月6日 金曜日 午前11時32分 Transfer charger If copies start becoming streaky or blotchy, the transfer charger may be dirty. Clean the charger using the following procedure. 1 Turn the power switch off. (p.13) 2 Ensure that the multi-bypass tray is open and then open the side cover while pressing the side cover open button. 3 Take the charger cleaner out by holding the tab.
AL-2030_2040CS.book 8 61 ページ 2007年4月6日 金曜日 午前11時32分 TROUBLESHOOTING THE UNIT This chapter describes misfeed removal and troubleshooting. For problems with the printer function or the scanner function, see the online manual or the Help file for the printer/scanner driver. TROUBLESHOOTING If any problem occurs, check the list below before contacting our Technical Assistance Department. Problem Unit does not operate. Blank copies Copies are too dark or too light.
08-Trouble.fm 62 ページ 2007年4月18日 水曜日 午後1時12分 STATUS INDICATORS When the following indicators light up or blink on the operation panel or the following alphanumeric codes appear in the display, solve the problem immediately referring to both the table below and the relevant page. Be sure to use only genuine SHARP parts and supplies. Indication Cause and remedy Page Replacement of drum cartridge will be needed 71 soon. Prepare a new cartridge. Drum cartridge must be replaced. Replace it with a new one.
AL-2030_2040CS.book 63 ページ 2007年4月6日 金曜日 午前11時32分 MISFEED REMOVAL When the misfeed ( ) indicator blinks or blinks in the display, the unit will stop because of a misfeed. When the SPF misfeeds an original sheet, the unit will stop and the SPF misfeed ( ) indicator will blink, while the misfeed ( ) indicator will remain off. For a misfeed of originals in the SPF, see "E: Misfeed in the SPF" (p.67). 1 Open the multi-bypass tray, and then open the side cover. 2 Check the misfeed location.
AL-2030_2040CS.book 64 ページ 2007年4月6日 金曜日 午前11時32分 A: Misfeed in the paper feed area 1 Gently remove the misfed paper from the paper feed area as shown in the illustration. When the misfeed ( ) indicator blinks, and the misfed paper is not seen from the paper feed area, pull out the paper tray and remove the misfed paper. If the paper cannot be removed, proceed to "B: Misfeed in the fusing area". The fusing unit is hot. Do not touch the fusing unit when removing misfed paper.
AL-2030_2040CS.book 65 ページ 2007年4月6日 金曜日 午前11時32分 B: Misfeed in the fusing area 1 Lower the fusing unit release lever. 2 Gently remove the misfed paper from under the fusing unit as shown in the illustration. If the paper cannot be removed, proceed to "C: Misfeed in the transport area". Fusing unit release lever The fusing unit is hot. Do not touch the fusing unit when removing misfed paper. Doing so may cause a burn or other injury.
AL-2030_2040CS.book 66 ページ 2007年4月6日 金曜日 午前11時32分 C: Misfeed in the transport area 1 Lower the fusing unit release lever. See "B: Misfeed in the fusing area" (p.65). 2 Open the front cover. To open the front cover, see "INSTALLING THE TD CARTRIDGE" (p.10). 3 4 Rotate the roller rotating knob in the direction of the arrow and gently remove the misfed paper from the exit area.
AL-2030_2040CS.book 67 ページ 2007年4月6日 金曜日 午前11時32分 E: Misfeed in the SPF An original misfeed may occur at one of three locations: if the misfed original is seen from the document feeder tray, (A) in the document feeder tray; if the misfed original is not seen from the document feeder tray, (B) in the exit area or (C) under the document feeder cover. Remove the misfed original following the instructions for each location.
AL-2030_2040CS.book 68 ページ 2007年4月6日 金曜日 午前11時32分 IF AN ORIGINAL MISFEED OCCURS WHILE USING THE SPF If a misfeed occurs in the machine when the SPF is used, the SPF will automatically stop scanning. Manually remove the misfed original. You can check the number of originals that must be returned to the document feeder tray in the display on the operation panel. Follow the steps below to display the number of originals to be returned. The following procedure omits removal of the misfeed.
AL-2030_2040CS.
AL-2030_2040CS.book 70 ページ Bit depth Sensor Scanning speed Memory Power supply Power consumption Width Overall dimensions Depth Weight (Approximately) *8 Width Unit Depth dimensions Height Operating conditions Emulation Interface port Noise level 2007年4月6日 金曜日 午前11時32分 AL-2030 1 bit or 8 bit/pixel Color CCD Max. 2.88ms/line 8 MB 120V, 60Hz, 8.0A Max. 1.0kW 31-9/16" (802mm) 17-33/64" (445mm) AL-2040CS 16 MB 37.04 lbs. (16.8kg) 44.97 lbs. (20.
AL-2030_2040CS.book 71 ページ 2007年4月6日 金曜日 午前11時32分 ABOUT SUPPLIES AND OPTIONS When ordering supplies, please use the correct part numbers as listed below. Be sure to use only genuine SHARP parts and supplies. For best copying results, be sure to use only SHARP Genuine Supplies which are designed, engineered, and tested to maximize the life and performance of SHARP copiers. Look for the Genuine Supplies label on the toner package.
AL-2030_2040CS.book 72 ページ 2007年4月6日 金曜日 午前11時32分 MOVING AND STORING THE UNIT Moving instructions When moving the unit, follow the procedure below. When moving this unit, be sure to remove the TD cartridge in advance. 1 Turn the power switch off and remove the power cord from the outlet. 2 Open the side cover and front cover, in that order. Remove the TD cartridge and close the front cover and side cover, in that order.
AL-2030_2040CS.book 73 ページ 2007年4月6日 金曜日 午前11時32分 IMPORTANT SERVICE INFORMATION (U.S.A. only) If a Problem Occurs Most operational questions can be answered by referring to the Operation Manual or Online Manual. Also, for your convenience, you will find answers to frequently asked questions on our website at www.sharpusa.com. You can also e-mail your service question to www.digitalcopiersupport@sharpsec.com. Should you require further assistance, call Sharp at 1-630378-3590.
AL-2030_2040CS.book 74 ページ 2007年4月6日 金曜日 午前11時32分 END-USER LIMITED WARRANTY (Valid in U.S.A.
AL-2030_2040CS.
11-MSDS-F01231.fm 76 ページ 2007年4月11日 水曜日 午後1時1分 MATERIAL SAFETY DATA SHEET Page : 1/4 Date Revised : Mar . 1. 2007 Date Issued : Sep . 1. 2003 MSDS No. F-01231 1.PRODUCT AND COMPANY IDENTIFICATION Product Name : AL-1651CS/AL-1661CS/AL-1631/AL-1641CS/AL-1642CS/AL-1217D AL-1457D/FO-DC550/AL-1655CS/ FO-55ND/AL-100TD/AL-110TD/AL-100TDN(Black Toner) Supplier Identification : Sharp Corporation 22-22 Nagaike-cho, Abeno-ku, Osaka, Japan Local suppliers are listed below.
11-MSDS-F01231.fm 77 ページ 2007年4月11日 水曜日 午後1時2分 MATERIAL SAFETY DATA SHEET Page : 2/4 Date Revised : Mar . 1. 2007 Date Issued : Sep . 1. 2003 MSDS No. F-01231 3.HAZARDS IDENTIFICATION Most Important Hazards and Effects of the Products Human Health Effects : There are no anticipated carcinogenic effects from exposure based on animal tests performed using toner. When used as intended according to instructions, studies do not indicate any symptoms of fibrosis will occur.
11-MSDS-F01231.fm 78 ページ 2007年4月11日 水曜日 午後1時2分 MATERIAL SAFETY DATA SHEET Page : 3/4 Date Revised : Mar . 1. 2007 Date Issued : Sep . 1. 2003 MSDS No. F-01231 8.EXPOSURE CONTROLS / PERSONAL PROTECTION Engineering Measures Ventilation : Not required under intended use. Exposure Limit Values OSHA-PEL(USA) : 15mg/m3 (Total Dust), 5mg/m3 (Respirable Dust) ACGIH-TLV(USA) : 10mg/m3 (Total Dust), 3mg/m3 (Respirable Dust) Personal Protective Equipment Respiratory Protection : Not required under intended use.
11-MSDS-F01231.fm 79 ページ 2007年4月11日 水曜日 午後1時2分 MATERIAL SAFETY DATA SHEET Chronic Effect Page : 4/4 Date Revised : Mar . 1. 2007 Date Issued : Sep . 1. 2003 MSDS No. F-01231 and lung tumors. Moreover, a two-year cancer bioassay using a typical toner preparation containing carbon black demonstrated no association between toner exposure and tumor development in rats.
AL-2030_2040CS.book 80 ページ 2007年4月6日 金曜日 午前11時32分 MATERIAL SAFETY DATA SHEET Page : 1/4 Date Revised : Mar . 1. 2007 Date Issued : Sep . 1. 2003 MSDS No. F-31231 1.PRODUCT AND COMPANY IDENTIFICATION Product Name : AL-1651CS/AL-1661CS/AL-1631/AL-1641CS/AL-1642CS/AL-1217D AL-1457D/FO-DC550/AL-1655CS/ FO-55ND/AL-100TD/AL-110TD/AL-100TDN(Black Developer) Supplier Identification : Sharp Corporation 22-22 Nagaike-cho, Abeno-ku, Osaka, Japan Local suppliers are listed below.
AL-2030_2040CS.book 81 ページ 2007年4月6日 金曜日 午前11時32分 MATERIAL SAFETY DATA SHEET Page : 2/4 Date Revised : Mar . 1. 2007 Date Issued : Sep . 1. 2003 MSDS No. F-31231 3.HAZARDS IDENTIFICATION Most Important Hazards and Effects of the Products Human Health Effects : There are no anticipated carcinogenic effects from exposure based on animal tests performed using toner. When used as intended according to instructions, studies do not indicate any symptoms of fibrosis will occur.
AL-2030_2040CS.book 82 ページ 2007年4月6日 金曜日 午前11時32分 MATERIAL SAFETY DATA SHEET Page : 3/4 Date Revised : Mar . 1. 2007 Date Issued : Sep . 1. 2003 MSDS No. F-31231 Exposure Limit Values OSHA-PEL(USA) ACGIH-TLV(USA) Personal Protective Equipment Respiratory Protection Hand Protection Eye Protection Skin Protection Other Protective Equipment : 15mg/m3 (Total Dust), 5mg/m3 (Respirable Dust) : 10mg/m3 (Total Dust), 3mg/m3 (Respirable Dust) : Not required under intended use.
AL-2030_2040CS.book 83 ページ 2007年4月6日 金曜日 午前11時32分 MATERIAL SAFETY DATA SHEET Chronic Effect Page : 4/4 Date Revised : Mar . 1. 2007 Date Issued : Sep . 1. 2003 MSDS No.
AL-2030_2040CS.book 84 ページ 2007年4月6日 金曜日 午前11時32分 INDEX A D Acrobat Reader ................................. 45 Alarm indicator - Drum replacement required indicator.............................. 6, 58, 62 - Misfeed indicator ................ 6, 62, 63 - TD cartridge replacement required indicator.............................. 6, 57, 62 Appendix ........................................... 69 Auto clear time ............................ 54, 55 Auto power shut-off mode ...........
AL-2030_2040CS.book 85 ページ 2007年4月6日 金曜日 午前11時32分 M R Making copies ................................... 46 MFP driver - Print Status Window ..................... 19 - Printer driver................................. 19 - Scanner driver .............................. 19 Misfeed indicator ..................... 6, 62, 63 Misfeed removal - Fusing area .................................. 65 - Paper feed area............................ 64 - SPF ..............................................
AL-2030_2040CS.book 86 ページ 2007年4月6日 金曜日 午前11時32分 U Z USB interface cable..................... 25, 71 Using the manuals............................... 4 Using the printer mode ...................... 34 Using the scanner mode ................... 36 Using the SHARP TWAIN ................. 42 ZOOM indicator ............................. 6, 51 ZOOM key ..................................... 6, 51 INDEX BY PURPOSE Checking the package ......................... 8 Cleaning the unit - Cabinet ..............
AL-2030_2040CS.
AL-2030_2040CS.
AL-2030_2040CS.book 1 ページ 2007年4月6日 金曜日 午前11時32分 ♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠ For users in the USA This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
!!Cover4.fm 1 ページ 2007年4月18日 水曜日 午後1時21分 AL-2030/AL-2040CS OPERATION MANUAL SHARP ELECTRONICS CORPORATION 1 Sharp Plaza, Mahwah, New Jersey 07430-1164. www.sharpusa.com This manual has been printed using a vegetable-based soy oil ink to help protect the environment.