MODEL AJ-6000 COLOUR INKJET COPIER OPERATION MANUAL Page GETTING STARTED 4 SETTING UP THE UNIT 6 LOADING PAPER 19 OPERATION PANEL PART NAMES AND FUNCTIONS 23 COPYING 31 USER PROGRAM 43 USER MAINTENANCE 50 TROUBLESHOOTING 60 APPENDIX 64
This equipment complies with the requirements of Directives 89/336/EEC and 73/23/EEC as amended by 93/68/EEC. Dieses Gerät entspricht den Anforderungen der EG-Richtlinien 89/336/EWG und 73/23/EWG mit Änderung 93/68/EWG. Ce matériel répond aux exigences contenues dans les directives 89/336/CEE et 73/23/CEE modifiées par la directive 93/68/CEE. Dit apparaat voldoet aan de eisen van de richtlijnen 89/336/EEG en 73/23/EEG, gewijzigd door 93/68/EEG. Dette udstyr overholder kravene i direktiv nr.
Cautions Follow the cautions below when using this unit. ! The unit is affected by the environment in which it is installed. Do not install your unit in the following area. −Dusty areas If dust enters the internal parts of the unit, damage or poor-quality output can result. −Areas in direct sunlight Direct sunlight can distort the plastic parts of the unit and result in poor-quality output.
CONTENTS GETTING STARTED MAIN FEATURES ............................................................................................ 4 USER'S MANUAL ............................................................................................ 5 SETTING UP THE UNIT CONFIRMING THE CONTENTS ..................................................................... 6 PART NAMES AND FUNCTIONS ................................................................... 7 UNPACKING................................................
USER PROGRAM SAVING THE USER DEFAULT SETTING .................................................... 43 RESETTING THE USER DEFAULT SETTING ............................................. 44 PROGRAM TIMEOUT ................................................................................... 44 SLEEP MODE................................................................................................ 45 CHANGING THE PAPER DEFAULT SETTING ............................................ 46 CHANGING THE LANGUAGE SETTING .
GETTING STARTED MAIN FEATURES ! High-speed copying of 12cpm (monochrome), or 7cpm (colour).*1 ! Scan once print many (SOPM) feature *2 allows excellent copying productivity. ! Its variety of functions including editing posters and reversing scanned images enable you to use this unit for various purposes. ! Carbon black ink enables clear copying quality of laser copier level. ! Each ink tank is independent, they can be used until completely spent, ensuring minimum waste of ink.
USER'S MANUAL The contents of this manual are as follows. GETTING STARTED Provides you with information on how to use this manual, a list of cautions, main feature of the unit, and other useful tips that will help you set up the unit. SETTING UP THE UNIT Lists the setup procedures including how to install the print heads and the ink tanks. LOADING PAPER Explains how to insert paper into the unit, and other requirements for copying.
SETTING UP THE UNIT Here we explain how to install the print heads and the ink tanks, after removing the unit from its packaging. CONFIRMING THE CONTENTS The following items are packed with the unit in the box. If any of the following items are missing, please contact your point of purchase or your nearest authorised SHARP service centre.
PART NAMES AND FUNCTIONS The following illustration shows the part names and function of the unit. Before operating, it is advisable to familiarise yourself with the unit. The illustration below shows the unit with all the parts installed. Front Side Paper knob When copying onto thick paper, adjust the knob to setting. (Return the knob to its original setting after copying.) Original cover Open this cover to set an original for copying.
PART NAMES AND FUNCTIONS Internal Part Print head latch Colour print head Use this to attach/detach print heads. Applies ink onto the paper. Black print head Cyan ink tank Yellow ink tank Magenta ink tank Applies ink onto the paper. Carriage Black ink tank Rear Side Bypass tray Use this tray to copy on a single page. Insert paper into the tray copy side up. When copying onto thick paper, open the tray until it reaches position 2. (The tray has two stop positions.
UNPACKING 1 Remove the tapes to shown in the illustrations. Remove the protective material. 2 Open the front cover, and remove the protective material shown in the illustration. Refer to step 4 of "INSTALLING THE PRINT HEADS AND THE INK TANKS" for details on how to open the front cover. (See page 12) 3 Release the scan head locking switch. Released 4 Close the front cover. Refer to step 13 of "INSTALLING THE PRINT HEADS AND THE INK TANKS" for details on how to close the front cover.
ATTACHING THE TRAYS Attach the paper tray and the output tray to the front of the unit. Follow the steps shown below. 1 Attach the paper tray by firmly pushing down both edges. Make sure that the paper tray has been securely attached to the body. 2 Attach the output tray as shown in the illustration. Place this projection toward the unit. Refer to "LOADING PAPER" for more information (See page 19).
CONNECTING THE POWER CORD 1 Insert the power cord into the socket on the rear of the unit. 2 Connect the other end of the power cord to an outlet. The unit will be turned on automatically. Auto Shut Off The unit automatically turns off the power when 60 minutes have elapsed after the last operation. Press the "POWER" button ( ) to turn on the unit again. Do not connect the unit to other than 100V-240V outlet. Plugging the unit into incompatible power supply may cause irreparable damage or fire.
INSTALLING THE PRINT HEADS AND THE INK TANKS Follow the steps below to install the print heads and the ink tanks. This section describes how to install the print heads and ink tanks when you install them for the first time after purchasing this unit. Refer to "THE INK TANK" (See page 50) and "THE PRINT HEAD" (See page 52) for the information on replacing the ink tank or print head in the unit with new ones. 1 Make sure that the scan head fixing switch is released. Refer to step 3 of "UNPACKING".
INSTALLING THE PRINT HEADS AND INK TANKS 5 Open the maintenance cover. 6 Raise the print head latch. Raise the latch until it comes in contact with the front cover. 7 Remove the print heads from their protective cases. Do not touch the metal portion of the print head. Doing so may make the head inoperable. 8 Insert the print heads. Insert the black print head into the left carriage opening, and the colour print head into the right carriage opening.
INSTALLING THE PRINT HEADS AND INK TANKS 9 Lower the print head latch. Lower the latch until it clicks into the latched position. 10 Unpack the ink tanks from their protective wrapping and slowly remove the tape. ! Hold the ink tank upright when removing the tape. Do not touch the uncovered opening on the ink tank, as ink will get on your hands. ! Ensure that there are no pieces of tape remaining on the ink tank.
INSTALLING THE PRINT HEADS AND INK TANKS 12 Close the maintenance cover. 13 Close the front cover. Press both edges of the front cover with both of your hands until it locks. 14 Confirm on the display panel that print heads and ink tanks have been securely set to the unit. The unit automatically aligns the print heads, and a test chart will be printed.
ALIGNING THE PRINT HEADS The print heads must be adjusted after being installed to the unit, or when lines appear unevenly or with spaces on the output. Follow the steps listed below to adjust the print heads. 1 Insert paper into the unit Refer to "LOADING PAPER" for more information (See page 19). 2 Press the "MENU" button, and keep pressing the (or ) "ARROW" button until "Maintenance" is displayed on the first line of the display panel. 3.Maintenance 1.
ALIGNING THE PRINT HEADS 5 After aligning the print heads, the message shown below (A pattern) will appear in the display panel. Referring to the test chart results, use the (or ) "ARROW" button to display the best value (select from -8 to +8) on the second line of the display panel. Now press the "ENTER" button. Select A pattern 0 + Look at the chart A on your test chart. Select the number under the pattern sample, in which is located the closest to the centre of the two vertically parallel lines.
ALIGNING THE PRINT HEADS 7 Specify the best values for "C Pattern", "D Pattern" settings in the same manner. (select from -6 to +6) Look at the chart C and D on your test chart. Select the numbers under the pattern samples, which have the straightest lines. Example -6 -6 -5 -4 -3 +1 -2 -1 0 +1 +2 +3 +4 +5 +6 Select C pattern +1 + In the example shown above, "+1" shows the straightest line. Therefore, select "+1" to show on the display panel, and then press the ENTER button.
LOADING PAPER Follow the steps below to load paper into the paper tray or bypass tray. You can load plain paper and other special paper. For detailed information on paper type, see page 65. LOADING PAPER INTO THE PAPER TRAY 1 Remove the output tray 2 Adjust the guides of the paper. 3 Load the paper. and , and open the front lid of paper tray . shown in the illustration to the width Load the paper so that the side to be copied onto is face down.
LOADING PAPER INTO THE PAPER TRAY 4 Move the guides ( , ) to touch the edges of the paper. When loading thick paper Set the paper knob to the "Thick Paper ( )" setting. Most paper will be fed correctly from the paper tray. However, if paper is particularly stiff or heavy, it should be fed one at a time through the bypass tray. This will avoid wrinkling or misfeeding. 5 Close the front lid of the paper tray by firmly pushing on it’s right edge.
LOADING PAPER INTO THE PAPER TRAY 7 Pull out the output tray extension to the proper position, and then raise the paper stop guide. ! Be sure that paper is free of rips, dust, wrinkles, and curled or bent edges. ! Make sure all the paper in the stack is the same size and type. ! Fan the paper and tap it against a flat surface before loading into the unit. ! The paper tray can hold up to 150 sheets of 75g/m2 (20lbs.) plain paper. Be sure to keep total thickness of the loaded paper stack below 15mm (0.
LOADING THE BYPASS TRAY WITH PAPER If you wish to print on another paper type not loaded into the main paper tray, use the bypass feed. Only one sheet of paper can be placed in the bypass tray at a time. 1 Open the bypass tray located on the rear of the unit. 2 Load the paper so that the side to be copied onto is face up. Align the paper with the right side of the bypass tray.
OPERATION PANEL PART NAMES AND FUNCTIONS Check the names and functions of the parts on the operation panel. OPERATION PANEL PART NAMES AND FUNCTIONS Refer to the illustration of the operation panel on your unit. POWER button ( ) Use to turn the unit on/off. (See page 30) Paper clip tray Keep paper clips here. COPY QUALITY button/ COPY QUALITY indicator ( , ) Use this button to select the required copy quality. (See page 34) ERROR indicator ( ) Turn on this lamp when an error occurs.
OUTLINE OF THE DISPLAY PANEL The display panel indicates the status of the unit with four styles of display as shown below. Displaying the ready message Ready to Copy 100% A4 Indicates the status of the copier. 0 Displays the number of copies. Displays the paper size. Indicates the reduction/enlargement copy ratio setting. One of the following characters is displayed when the setting is active.
OUTLINE OF THE DISPLAY PANEL Displaying the status messages Displays the status of the unit including the warning for no paper, no ink, paper jam and so on. Example: Load Paper; Press Start to resume Unable to Copy, Out of Black Ink Displaying the scrolling screens When the following items are displayed, the scroll function is accessible for use.
OUTLINE OF SETTING OPTIONS You can change your copier settings for "PAPER SELECT", "BRIGHTNESS/INTENSITY", "ZOOM" and "MENU". To change each setting, press the relevent button once, and press the (or ) "ARROW" button until the desired option name appears on the first line in the display panel. Use the (or ) "ARROW" button to adjust the setting values displayed on the second line of the display panel. After selecting the desired setting, press the "ENTER" button.
OUTLINE OF SETTING OPTIONS "ZOOM" button functions (See page 35) Setting option (Appears on the first line.) Setting value (Appears on the second line.) 1. Variable Use the , ARROW buttons to specify the setting between 25% - 400%. 2. Zoom Fixed reduction/enlargement copy ratios: 91% 3. AutoFit Displays the paper size currently selected. 4. Poster 5. Repeat Image 6. Mirror 7. Custom Use the , ARROW buttons to specify the setting between 25% - 400%.
OUTLINE OF SETTING OPTIONS "MENU" button functions Setting option (Appears on the first line.) Setting value (Appears on the second line.) 1.Original Type (See page 32) 1. Auto 2. Ink Levels (See page 52) 1. Black 3. Maintenance (See page 52) 2. Text/Graphics 3. Photo/Halftone Default setting value: 1. Auto 2. Cyan 3. Magenta 4. Yellow 1. Clean PrintHead 1 2. Clean PrintHead 2 3. Clean PrintHead 3 4. Clean PrintHead 4 5. Print Test Page 6. Align Print Head 4. Feature Defaults 1. Save new 2.
OUTLINE OF SETTING OPTIONS Example: Setting the "Paper Size" 1) Press the "PAPER SELECT" button. Ready to Copy 100% A4 0 1.Paper Type 1.Plain Paper 2) Press the "ARROW" button. The "Paper Type" setting screen will switch to the "Paper Size" setting screen. To go back to the previous setting option, press ARROW button. 2.Paper Size 3.A4 1.Paper Type 1.Plain Paper Keep pressing the "ARROW" button until the desired paper size appears.
POWER SAVE MODES / PROGRAM TIMEOUT To reduce overall power consumption, this unit has the "SLEEP MODE" (See page 45) and the "Auto Shut Off" mode. Sleep Mode The following message appears in the display panel while the unit is in the sleep mode. Sleep Mode; press Start to begin Auto Shut Off The unit automatically turns off the power when 60 minutes past after the last operation. Press the "POWER" button ( ) to turn on the unit again.
COPYING In this chapter, you will learn a variety of copying operations. NORMAL COPYING 1 Make sure that the power is on. Make sure that the supplied power code is plugged into a power source. (See page 11) The unit will automatically turn on the power when it is plugged into a power source. If the power code is plugged into a power source and the unit is still off, press the "POWER" button ( ) to turn on the unit.
NORMAL COPYING 2) Gently close the original cover. The unit can read up to A4 size (Max. 216mm x 297mm) original. Setting the original type setting To change the setting, follow the steps below. 1) Press the "MENU" button, and keep pressing the (or ) "ARROW" button until the "Original Type" setting is displayed on the first line of the display panel. 1.Original Type 1.
NORMAL COPYING 2) Keep pressing the (or ) "ARROW" button to adjust the second line of the display panel until it corresponds to the inserted paper type. The paper setting values are listed below. Paper type 1. Plain Paper (Default setting) 2. Coated Paper 3. Photo Paper 4. Transparency 5. Iron-on 6. Card Stock Description Select this type when copying onto normal paper. Select this type when copying onto coated paper. Select this type when copying onto photo quality paper.
NORMAL COPYING 4 Set the number of copies. If you make a single copy, go to step 5. If you make multiple copies, use the ( specify the number of copies. ), ( ) "COPY QUANTITY" buttons to Set the number of copies using the increase ( ) / decrease ( ) buttons. Repeatedly pressing the buttons will increase/decrease the display in increments of 1. If either button is pressed and held down, the display will change in increments of one until 5 is reached and then will change in increments of 5. (Ex. 10.
REDUCING/ENLARGING THE IMAGE SIZE FOR COPYING The image size can be reduced/enlarged for copying between 25% and 400%. You can also use useful functions such as "Poster", "Repeat Image", and "Mirror" functions. 1 Set the original on the original table and make sure that the desired size of paper is set in any of the paper trays.
REDUCING/ENLARGING THE IMAGE SIZE FOR COPYING Example:"Poster" setting Original For this example the enlargement is set to 200%. In the example, the printable area of the original image is enlarged by 200%. The machine will automatically determine the required number of copy sheets required to contain the composite image. To assemble the sheets to make the final poster, it will be necessary to trim the edges of the paper. Copy Trim the margin area. Connect all the pages.
REDUCING/ENLARGING THE IMAGE SIZE FOR COPYING 3 To change the reduction/enlargement ratio option, keep pressing the (or ) "ARROW" button, and set the reduction/enlargement ratio to the desired setting (25% - 400%). 5.Repeat Image 30% + 4 Press the "ENTER" button. A checkmark ( ) will appear, indicating the selected value. After displaying the selected value for one second, the display will return to the ready message. 5.
SETTING UP THE PREFERENCES FOR COPIED IMAGES 3 Keep pressing the (or ) "ARROW" button until the desired setting value is displayed on the second line of the display panel. Select the desired value from "1. Lightest", "2. Lighter", "3. Normal" (Default setting), "4. Darker" and "5. Darkest" setting value. 4 Press the "ENTER" button. A checkmark ( ) will appear, indicating the selected values. After displaying the selected value for one second, the display will return to the ready message.
ADDING AN ANNOTATION ON YOUR COPY The annotation setting enables you to print one of the preset annotations on one of the preset positions. Follow the steps shown below to select the annotation and position for your document. Selecting the print pattern Select an annotation for your document. 1 Set the original on the original table and make sure that the desired size of paper is set in any of the paper trays. See page 33 to confirm the paper sizes in the unit.
ADDING AN ANNOTATION ON YOUR COPY 6 Press the "ENTER" button. 1.Print Pattern 2.Confidential A checkmark ( ) will appear, indicating the selected annotation. After displaying the selected value for one second, the display will return to the ready message. Unless you change the print position from the factory default setting, the annotation will be printed at the top right of the paper. For information on setting the print position, refer to "Selecting the print position" shown below.
ADDING AN ANNOTATION ON YOUR COPY 6 Press the "ENTER" button. 2.Print Position 5.Bottom/Centre A checkmark ( ) will appear, indicating the selected position. After displaying the selected value for one second, the display will return to the ready message. 7 After the number of the copies entry, and specifying the colour mode and copy quality setting, press the "START" button ( ). You get copies with the annotation in the selected position.
ADDING AN ANNOTATION ON YOUR COPY The print position of the annotation 14mm The print position of each value 4.Bottom/Right 1.Top/Right 2.Top/Centre 5.Bottom/Centre 3.Top/Left 6.
USER PROGRAM Depending on the user environment, you can save regularly used settings, and change the factory default settings to suit individual conditions. SAVING THE USER DEFAULT SETTING You can save the current settings on the unit as user default settings. Follow the steps shown below. You can save the following settings as user default settings; colour mode, copy quality, brightness, intensity, zoom, and original type. These settings will remain even after once the power is turned off.
SAVING THE USER DEFAULT SETTING The condition of the setting values Setting option Colour mode Copy quality Brightness Intensity Zoom Original Type Paper Type Paper Size Copy Quantity Program Timeout Sleep Mode Paper Default Setting Language Annotation Factory default setting COLOUR The third indicator 3. Normal 3. Normal 1. Variable 1. Auto 1. Plain Paper 3. A4 0 2. 60 seconds 1. 5 minutes 2. A4 2. English 1. Print Pattern: 1. None 2. Print Position: 1.
RESETTING THE USER DEFAULT SETTING 3 Press the "ENTER" button. The settings saved as the user default settings will return to the values of the factory default setting. The following message will appear for one second after the "ENTER" button is pressed. The unit will soon return to be ready. Resetting feature defaults...
SLEEP MODE When the unit is left idle for the specified period of time, the unit will automatically enter the sleep mode to save energy. Follow the steps listed below to set the time to elapse before switching over to the sleep mode function. 1 Press the "MENU" button, and keep pressing the (or ) "ARROW" button until "Sleep Mode" is shown on the first line of the display panel. 6.Sleep Mode 1.
CHANGING THE PAPER DEFAULT SETTING Use this function to change the default setting for paper used by the unit. The reduction/ enlargement copy ratio settings will also changed automatically. Refer to "REDUCING/ ENLARGING THE IMAGE SIZE FOR COPYING" for more information on making changes to these settings. (See page 35) Follow the steps listed below to change the paper default setting.
CHANGING THE LANGUAGE SETTING 5 Press the "ENTER" button. When you select "2. Yes", the following message will appear on the display panel to inform you that the unit is updating the display language. The unit will automatically return to be ready. Updating display language... After displaying the selected "1. No", the display will return to the ready message.
HOW TO USE THE "CLEAR/STOP" BUTTON "CLEAR/STOP" button functions Operation Function Display Description Example: Clears the number of copies setting Ready to Copy 100% A4 10 Ready to Copy 100% A4 0 Returns the specified number of copies to "0" when the number of copies has been set larger than "0". Example: Clears setting options 2.Paper Size 3.A4 Ready to Copy 100% A4 Press once During selection of a setting option, returns to the ready message. 0 Example: Stops copying Copying...
USER MAINTENANCE This chapter provides you with the daily maintenance information. You will learn how to maintain the unit and the accessories. Follow the steps shown in this chapter to change, clean or align the print heads or ink tanks. THE INK TANK Read below for information on the ink tank. Changing the ink tank When the ERROR indicator on the unit lights, and an error message appears informing you that no ink remains, change the ink tank specified in the error message.
THE INK TANK 7 Close the maintenance cover. 8 Close the front cover. 9 Make sure that the display panel shows the following message, and then clean the print head. Refer to "INSTALLING THE PRINT HEADS AND THE INK TANKS" for details on how to close the maintenance cover. (See page 15) Refer to "INSTALLING THE PRINT HEADS AND THE INK TANKS" for details on how to close the front cover. (See page 15) When all the ink tanks have been replaced... The unit automatically cleans both of the print heads.
THE INK TANK Checking the level of remaining ink To check the level of remaining ink, follow the steps below. 1 Press the "MENU" button, and keep pressing the (or ) "ARROW" button until "Ink Levels" is displayed on the first line of the display panel. 2.Ink Levels 1.Black 100% 2 Keep pressing the (or ) "ARROW" buttons until the ink you want to check is shown on the second line of the display panel. Select to the desired ink tank from "1. Black", "2. Cyan", "3. Magenta" and "4. Yellow" options.
THE PRINT HEAD 3 Press the "ENTER" button. The message shown below will appear in the display panel, and cleaning of the print head will start. After finishing cleaning operation, the unit will return to be ready. Cleaning the Print Head... 4 Print a test page when "Clean PrintHead 1" is selected. A test page is printed automatically when "Clean PrintHead 2-4" are selected. Check copy quality the printed test page. For details refer to "PRINTING A TEST PAGE".
THE PRINT HEAD 6 Remove the new print head from its protective case. 7 Insert the new print head. 8 Lower the print head latch. 9 Remove the ink tanks from the old print head and insert them into the newly inserted print head. Refer to "INSTALLING THE PRINT HEADS AND THE INK TANKS" for details. (See page 13) Refer to "INSTALLING THE PRINT HEADS AND THE INK TANKS" for details on how to insert the new print head. (See page 13) Refer to "INSTALLING THE PRINT HEADS AND THE INK TANKS" for details.
THE PRINT HEAD When the black print head has been replaced... New Black head? 1.Yes Select "Yes". New Colour head? 2.No Select "No". New colour ink? 1.No When the black print head and the colour ink tank have been replaced at the same time, instead of this message, the following message will appear to inform you that the unit is cleaning the print head. Select "Yes". Select "No". Cleaning the Print Head... Cleaning the Print Head... Printing... Alignment Patterns Printing...
THE PRINT HEAD When the print head latch is moved up and down without replacing any print head. New Black head? 2.No Select "No". New Colour head? 2.No Select "No". When all the ink tanks are replaced after opening the front cover. Cleaning the Print Head... The unit automatically cleans all the print heads. When the black ink tank is replaced after opening the front cover. New colour ink? 1.No Selected "Yes". Select "No". Cleaning the Print Head... Cleaning the Print Head...
PRINTING A TEST PAGE After changing the ink tank, aligning or changing the print head, print a test page to check print quality. Follow the steps below to print a test page. 1 Press the "MENU" button, and keep pressing the (or ) "ARROW" button until "Maintenance" appears on the first line of the display panel. 3.Maintenance 1.Clean PrintHead1 2 Keep pressing the (or ) "ARROW" button until "Print Test Page" appears on the second line of the display panel. 3.Maintenance 5.
CLEANING AND STORING THE UNIT Refer to the information below to clean the unit or store it for an extended period of time. Before cleaning, be sure to turn off the power using the "POWER" button ( then unplug the power cord. ) and Cleaning the cabinet If the cabinet becomes dirty, wipe it with a soft, clean and dry cloth without any waste thread. Cleaning the inside of the unit If the smudge is sticky and hard to remove, wipe it with firmly squeezed wet cloth.
CLEANING AND STORING THE UNIT Storing the unit To ensure no dust or foreign substances enter the machine during storage, follow the steps below. Remove the power cord and secure with tape.
TROUBLESHOOTING When an error message appears, or you believe the unit is suffering from a malfunction, refer to the "TROUBLESHOOTING" guide for assistance. Before contacting your point of purchase in relation to a problem, refer to the guide below for a possible remedy. Error message Problem and solution Page Unable to Copy, Out of xxxxx Ink The displayed ink tank is out of ink. Change the displayed ink tank. Page 50 (The ink colour that is empty is indicated on xxxxx.
IDENTIFYING UNIT PROBLEMS When an error message appears, or you believe the unit is not operating normally (e.g. copy quality is poor, etc.), refer to the guide below before contacting your nearest service centre. The Unit does not operate If the unit does not operate, first check if the power cord is inserted correctly. Check 1 Is the power cord firmly plugged into an electrical socket? Check if the power plug is plugged in correctly.
IDENTIFYING UNIT PROBLEMS Copying does not run smoothly Check 1 Have you specified the paper size preference? After loading different size of paper, make sure to change the paper size setting through the paper size setting option. Check 2 Have you changed the "Brightness" or "Intensity" setting options? Change the "Brightness" and "Intensity" settings appropriately. Check 3 Is the original table glass dirty? Clear the dirty portions on the original table glass.
IDENTIFYING UNIT PROBLEMS 2) Take off the output tray to remove the jammed paper. Under certain circumstances, the jammed paper can also be accessed by removing the paper tray. 3) After closing the jam cover and attaching the output tray, press the "START" button ( ). Make sure the "Clear Paper Jam..." message in the display panel has disappeared. If the jammed paper cannot be removed easily, do not pull the paper too hard as it may tear, or you may damage the unit.
APPENDIX This chapter shows specifications of the unit, supplies, and how to store the supplies. SPECIFICATIONS Model Type Scanner type Copy technology Copy resolution Scanning resolution Bit depth Sensor Mono Copy speed*1 Colour Scan width Min.
SUPPLIES Supply Part Number Ink tank (Black) Ink tank (Cyan) Ink tank (Magenta) Ink tank (Yellow) AJ-T20B AJ-T20C AJ-T20M AJ-T20Y Print head (Black type) Print head (Colour type) AJ-H20B AJ-H20C ! When storing spare ink tanks and print heads, leave them unopened in their packaging until you are ready to use them. ! For best results, use ink tanks within 6 months of installation.
INDEX A I Aligning the print head ........................... 16 Annotation setting ............................ 28, 39 Arrow button..................................... 23, 26 AutoFit.................................................... 35 Ink tank......................... 6, 8, 12, 14, 50, 60 Installing − Ink tank............................................... 14 − Print head ........................................... 12 − Tray .................................................... 10 Intensity .........
INDEX P Paper clip tray ........................................ 23 Paper default setting ........................ 28, 47 Paper knob................................... 7, 20, 22 Program timeout............................... 28, 45 Paper size .............................................. 32 Paper size setting............................. 26, 32 Paper type.............................................. 65 Paper type setting ............................ 26, 32 Part names and functions − Front side ..........
SHARP CORPORATION PRINTED IN CHINA KS 2001C TINSE0026ESZZ
