E-MANUAL 22-2 Purpose Adjustment/Setting/Operation data check Function (Purpose) Used to check the total number of misfeed and troubles. (When the number of total jam is considerably great, it is judged as necessary for repair.) Section The paper jam, trouble counter value is displayed. Machine JAM counter RSPF JAM counter Trouble counter 22-3 Purpose Adjustment/Setting/Operation data check Function (Purpose) Used to check misfeed positions and the misfeed count of each position.
2-8 MACHINE Purpose Adjustment/Setting/Operation data check Function (Purpose) Used to check the number of operations (counter value) of the finisher, the RSPF, and the scan (reading) unit. Section Operation/Procedure SPF The counter values of the finisher, the RSPF, and the scanner related counters are displayed.
22-12 Purpose Adjustment/Setting/Operation data check Function (Purpose) Used to check the RSPF misfeed positions and the number of misfeed at each position. (When the number of misfeed is considerably great, it can be judged as necessary for repair.) Section RSPF Operation/Procedure The paper jam and misfeed history is displayed from the latest one up to 50 items. (The old ones are deleted sequentially.
36cpm machine Item/Display MAINTENANCE ALL MAINTENANCE COL FUSING BELT FUSING ROLLER PRESSURE ROLLER SEPARATE PAWL SEPARATE PLATE FUSING WEB UNIT FUSING WEB SEND TC1 BELT TRANSFER BLADE PTC TC2 BELT PS PAPER OZONE FILTER DEVE CTRG (K) DEVE CTRG (C) DEVE CTRG (M) DEVE CTRG (Y) DRUM CTRG (K) DRUM CTRG (C) DRUM CTRG (M) DRUM CTRG (Y) MAIN CHARGER (K) MAIN CHARGER (C) MAIN CHARGER (M) MAIN CHARGER (Y) DRUM BLADE (K) DRUM BLADE (C) DRUM BLADE (M) DRUM BLADE (Y) TONER CTRG (K) TONER CTRG (C) TONER CTRG (M) TONER
22-18 22-90 Purpose Adjustment/Setting/Operation data check Function (Purpose) Used to display the user data delete history. Purpose Section Section Operation/Procedure Operation/Procedure The date and time of the user data delete are displayed. 1) Item name START END Display item Date Year/month/day/hour/min. Year/month/day/hour/min. Content Delete history (Date and time of operation start) Delete history (Date and time of operation end) Change the display with scroll key.
23-80 24-2 Purpose Purpose Operation test/check Function (Purpose) Used to check the operation of paper feed and paper transport in the paper feed section and the paper transport section. Used to output the list of the operation status of the sensor and the detectors in the paper feed section and the paper transport section. Section Operation/Procedure 1) Select the item to be cleared with the touch panel key. 2) Press [EXECUTE] key.
18cpm/20cpm/23cpm/26cpm/31cpm machine Item/Display Maintenance MAINTENANCE ALL MAINTENANCE COL Fusing FUSING BELT (23cpm/26cpm/ 31cpm machine only) HEAT ROLLER (20cpm model) FUSING ROLLER PRESS ROLLER Separation SEPARATE PAWL SEPARATE PLATE CLEAN ROLLER Transfer TC1 BELT TRANS BLADE TC2 BELT PTC Drum DRUM CTRG K DRUM CTRG C DRUM CTRG M DRUM CTRG Y Content Maintenance counter (Total) (Counter) Maintenance counter (Total) (Number of use days) Maintenance counter (Color) (Counter) Maintenance
Transfer Item/Display TC1 BELT TRANS BLADE TC2 BELT PTC Drum DRUM CTRG K DRUM CTRG C DRUM CTRG M DRUM CTRG Y Main charger MAIN CHARGER K MAIN CHARGER C MAIN CHARGER M MAIN CHARGER Y Drum blade DRUM BLADE K DRUM BLADE C DRUM BLADE M DRUM BLADE Y Content Primary transfer belt (Counter) Primary transfer belt (Number of use days) Primary transfer belt (Accumulated number of rotations) Transfer blade (Counter) Transfer blade (Number of use days) Transfer blade (Accumulated number of rotations
Division Internet Fax 24-9 Purpose Data clear Function (Purpose) Used clear the printer mode print counter and the self print mode print counter. Section Operation/Procedure 1) Select the item to be cleared with the touch panel key. 2) Press [EXECUTE] key. 3) Press [YES] key. E-mail FTP Other The target counter is cleared.
25-2 25-4 Purpose Purpose Setting Function (Purpose) Used to make the initial setting of toner density when replacing developer. (Automatic adjustment) Image process (Photoconductor/Developing/Transfer/Cleaning) Section Operation/Procedure Select a color to be adjusted with the touch panel. 2) Press [EXECUTE] key. Item/Display The developing motor rotates for 1 min 30 sec, and the toner density sensor makes sampling of the toner density. The detected level is displayed.
26 Item/Display BUILT-IN AUDITOR OUTSIDE AUDITOR 26-1 Setting Purpose Function (Purpose) Used to set Yes/No of installation of the right paper exit tray. P VENDOR3 Operation/Procedure 1) Enter the set value with 10-key. 2) Press [OK] key. (The set value is saved.) This setting is required to use the right paper exit tray unit.
Details of the vendor mode MODE1 MODE2 MODE3 Completion of the specified quantity. (Money remaining) Condition 1 Operation 1 Operation 1 Operation 1 26-7 Insufficient money during copy job BW/Color (no money remaining) Color (Money remaining) Condition 2 Operation 2 Operation 1 Operation 3 Condition 3 Operation 2 Operation 2 Operation 2 Completion of the specified quantity.
26-18 26-30 Purpose Purpose Setting Function (Purpose) Used to set Disable/Enable of the toner save mode operation. (For the Japan and the UK versions.) Section Setting Function (Purpose) Used to set the operation mode corresponding to the CE mark (Europe safety standards). (For slow start to drive the fusing heater lamp) Operation/Procedure Section 1) Select an item to be set with scroll keys. Operation/Procedure 2) Enter the set value with 10-key. 1) 3) Press [OK] key.
26-38 26-49 Purpose Purpose Setting Function (Purpose) Used to set Continue/Stop of print when the maintenance life is reached. Setting Function (Purpose) Used to set the print speed of postcards mode. Section Section Operation/Procedure Operation/Procedure 1) Enter the set value with 10-key. Select the copy speed mode with the touch panel. (Default: LOW) 2) Press [OK] key. Item/Setting value LOW HIGH The set value in step 1) is saved.
(*2) Item B: COLOR MODE set value (OFF: Displayed/ON: Not displayed) Mode Set value Single OFF OFF ON ON OFF OFF ON ON 0 1 2 3 4 5 6 7 2-color OFF ON OFF ON OFF ON OFF ON 2-Color/Single Counter OFF OFF OFF OFF ON ON ON ON (*3) Postcard, envelope Label sheet, tab sheet, OHP Saddle stitch finisher Purpose Postcard, envelope Label sheet, tab sheet, OHP Target paper setting 0 1 If it is set to "1," The operation is stopped when the operation is 10 sheets of a same kind are discharged continuously.
26-53 26-69 Purpose Purpose Setting Function (Purpose) User auto color calibration (color balance adjustment) Inhibit/Allow setting. Setting Function (Purpose) Used to set the operating conditions for toner near end. Section Section Operation/Procedure Operation/Procedure 1) 1) Select an item to be set with scroll keys. 2) Enter the set value with 10-key. 3) Press [OK] key. Enter the set value with 10-key.
Item/Display Content E TONER END COUNT F TONER E-MAIL ALERT Setting of the number of copy/ print/FAX outputs Enable after TONER NEAR END. 0 Low status send of E-mail alert (When the toner preparation message is displayed) (in near near toner end) 1 Low status send of E-mail alert (near toner end) Setting range 1-3 Default value 1 0-1 1 Setting value Toner preparation message Toner preparation time Toner near end message EUROPE 0 (Displayed) 0 (Displayed) U.K. 0 (Displayed) AUS.
26-71 26-78 Setting Purpose Setting Purpose Function (Purpose) Used to set the trial mode of the web browsing function. (26cpm/36cpm/ 31cpm(A) machine) Function (Purpose) Used to set the password of the remote operation panel. Section Operation/Procedure Operation/Procedure 1) Section Enter a password with 10-key. (5 - 8 digits) 1) Enter the set value with 10-key. The entered password is displayed on the column of "NEW". 2) Press [OK] key.
27-2 Setting Purpose Function (Purpose) Used to set the sender's registration number and the HOST server telephone number. (FSS function) Section Operation/Procedure 1) Select an item to be set with touch panel. [USER FAX NO] [SERVA TEL NO] 2) Enter the set value with 10-key. 3) Press [SET] key. The set value in step 2) is saved. USER FAX_NO. SERVA TEL_NO. Sender registration number (Max. 16 digits) Host server telephone number (Max.
Item/Display H I J K L TONER ORDER TIMING(C) EMPTY NEAR_END 0.05 0.1 0.15 0.2 0.25 0.3 0.35 0.4 0.45 0.5 TONER ORDER EMPTY TIMING(M) NEAR_END 0.05 0.1 0.15 0.2 0.25 0.3 0.35 0.4 0.45 0.5 TONER ORDER EMPTY TIMING(Y) NEAR_END 0.05 0.1 0.15 0.2 0.25 0.3 0.35 0.4 0.45 0.5 TEMP HISTORY CYCLE LOG OUTPUT CAPACITY(PCU) Content Toner order auto send timing setting (C) Empty Near end 0.05 0.1 0.15 0.2 0.25 0.3 0.35 0.4 0.45 0.5 Toner order auto send Empty timing setting (M) Near end 0.05 0.1 0.15 0.2 0.25 0.
27-5 27-9 Purpose Purpose Setting Function (Purpose) Used to set the machine tag No. (This function allows the host computer to check the machine tag No.) (FSS function) Communication (RIC/MODEM) Section Setting Function (Purpose) Used to set the paper transport time recording YES/NO threshold value and shading gain adjustment retry number. (FSS function) Operation/Procedure Section 1) Enter the password (max. 8 digits) with 10-key.
27-11 27-12 Purpose Purpose Others Function (Purpose) Used to check the serial communication retry number and the scanner gain adjustment retry number history. (FSS function) Section Others Function (Purpose) Used to check the high density, halftone process control and the automatic registration adjustment error history. (FSS Function) Operation/Procedure Section The serial communication retry number history and the scanner gain adjustment retry number history are displayed.
Item/Display RSPF Content FEED TIME1 (SPF) FEED TIME2 (SPF) FEED TIME3 (SPF) FEED TIME4 (SPF) FEED TIME5 (SPF) FEED TIME6 (SPF) FEED TIME7 (SPF) FEED TIME8 (SPF) FEED TIME9 (SPF) FEED TIME10 (SPF) History of paper transport time between SPF sensors 1 History of paper transport time between SPF sensors 2 History of paper transport time between SPF sensors 3 History of paper transport time between SPF sensors 4 History of paper transport time between SPF sensors 5 History of paper transport time between SP
Item/ Display PAPER TYPE SET A3 A4 B4 B5 A3: FIRST A4: FIRST B4: FIRST B5: FIRST Content Setting of paper kind for paper order alert Paper order number setting [Number of sheets] (A3) Paper order number setting [Number of sheets] (A4) Paper order number setting [Number of sheets] (B4) Paper order number setting [Number of sheets] (B5) Paper order alert number setting (A3) (Number of used sheets) Paper order alert number setting (A4) (Number of used sheets) Paper order alert number setting (B4) (Nu
33 41 33-2 41-1 Data clear Purpose Operation test/check Purpose Function (Purpose) Used to delete the ID (IDM) information of Felica card. (23cpm/31cpm(G) machine only) Function (Purpose) Used to check the operations of the document size sensor and the control circuit. Section Operation/Procedure Operation/Procedure The operating conditions of the sensors and detectors are displayed. 1) Press [EXECUTE] key. 2) Press [YES] key.
43 43-1 Setting Purpose Function (Purpose) Used to set the fusing temperature in each mode. Section Operation/Procedure 1) Select an item to be set with scroll keys. 2) Enter the set value with 10-key. 3) Press [OK] key. The set value in step 2) is saved.
Item/Display AS JOBEND_FUMON_TIME AT HL_UM_JOB_SET_TMP_B W Setting range Content Fusing motor after rotation time after completion of a job (Excluding heavy paper, OPH, and envelopes) Job enable temperature (B/W) when the upper roller temperature is lower than alpha C 0 - 255 70 - 230 Default value (SW-A) Group Group Group A B C 5 5 5 145 170 170 Default value (SW-B) Group Group Group A B C 5 5 5 160 175 175 Code descriptions TH_UM TH_LM TH_US SW-A SW-B Fusing thermistor main (Front surface o
Setting range Item/Display Content AN HI_WU_FM_ON_TMP AO HI_WU_END_TIME AP HI_WU_JOB_SET_TMP AQ HI_WARMUP_BORDER AR LO_WU_JOB_SET_TMP AS JOBEND_FUMON_TIME AT HL_UM_JOB_SET_TMP_ BW FM prior rotation start TH_US when Warm-Up at alpha C or above Warm-Up completion time when Warm-Up at alpha C or above Job enable TH_UM temperature when Warm-Up at alpha C or above Threshold value alpha to which SIM43-1-AN - AP is applied Job enable TH_UM temperature when Warm-Up at alpha C or below Fusing mo
Default value (SW-A) Group Group Group A B C 90 105 105 135 140 150 0 0 0 Setting range Item/Display Content AG AH AI HL_LM WARMUP_120L HL_US WARMUP_120L LO_WARMUP_TIME AJ HL_UM WARMUP_120H AK AL AM HL_LM WARMUP_120H HL_US WARMUP_120H HI_WARMUP_TIME AN HI_WU_FM_ON_TMP AO HI_WU_END_TIME AP HI_WU_JOB_SET_TMP AQ HI_WARMUP_BORDER AR LO_WU_JOB_SET_TMP AS JOBEND_FUMON_TIME AT HL_UM_JOB_SET_TMP_BW TH_LM set value when Warm-Up at 120C or below TH_US set value when Warm-Up at 120C or below
Item/Display X Y Z AA AB AC AD AE AF AG AH AI HL_US GLOSS PAPER HL_UM E-STAR HL_US E-STAR HL_UM PRE-JOB HL_LM E-STAR HL_UM HEAVY2 PAPER HL_LM HEAVY2 PAPER HL_US HEAVY2 PAPER HL_UM WARMUP_120L HL_LM WARMUP_120L HL_US WARMUP_120L LO_WARMUP_TIME AJ AK AL AM HL_UM WARMUP_120H HL_LM WARMUP_120H HL_US WARMUP_120H HI_WARMUP_TIME AN HI_WU_FM_ON_TMP AO HI_WU_END_TIME AP HI_WU_JOB_SET_TMP AQ HI_WARMUP_BORDER AR LO_WU_JOB_SET_TMP AS JOBEND_FUMON_TIME AT HL_UM_JOB_SET_TMP_ BW Setting range Content Gl
43-4 Purpose Setting Function (Purpose) Used to set the fusing temperature 2 in each mode. (Continued from SIM 43-1.) Section Operation/Procedure 1) Select an item to be set with scroll keys. 2) Enter the set value with 10-key. 3) Press [OK] key. The set value in step 2) is saved.
Item/Display J K L M N O P Setting range Content HL_LM HEAVY PAPER BW DUP HL_US HEAVY PAPER BW DUP HEAVY PAPER BW DUP APP CNT HL_UM HEAVY PAPER CL DUP HL_LM HEAVY PAPER CL DUP HL_US HEAVY PAPER CL DUP HEAVY PAPER CL DUP APP CNT Black-White heavy paper duplex TH_LM set value Black-White heavy paper duplex TH_US set value Black and white heavy paper duplex applying number of sheets Color heavy paper duplex TH_UM set value Color heavy paper duplex TH_LM set value Color heavy paper duplex TH_US set value Co
36cpm machine Item/Display A B C D HL_UM PLAIN PAPER BW DUP HL_LM PLAIN PAPER BW DUP HL_US PLAIN PAPER BW DUP PLAIN PAPER BW DUP APP CNT E F G H HL_UM PLAIN PAPER CL DUP HL_LM PLAIN PAPER CL DUP HL_US PLAIN PAPER CL DUP PLAIN PAPER CL DUP APP CNT I J K L HL_UM HEAVY PAPER BW DUP HL_LM HEAVY PAPER BW DUP HL_US HEAVY PAPER BW DUP HEAVY PAPER BW DUP APP CNT HL_UM HEAVY PAPER CL DUP HL_LM HEAVY PAPER CL DUP HL_US HEAVY PAPER CL DUP HEAVY PAPER CL DUP APP CNT M N O P Setting range Content Black-White pla
43-20 Purpose Adjustment/Setup Function (Purpose) Used to set the environmental correction under low temperature and low humidity (L/ L) for the fusing temperature setting (SIM 43-1) in each paper mode. Section Operation/Procedure 1) Correction value: -49 - +49, Input value: Actually inputted value (1 99) Select an item to be set with scroll keys. 2) Enter the set value with 10-key. 3) Press [OK] key. Correction value Input value The set value in step 2) is saved.
* Item D, F: When B5 size, correction of "-5" is made for item D and item F. * Item G, I: When B5 size, correction of "-5" is made for item G and item I.
26cpm/31cpm machine Item/Display A B C D E F G H I J K L M N O P Q R S T U V W X Y Z AA AB AC AD AE AF AG AH AI AJ AK AL AM AN HL_UM READY LL HL_LM READY LL HL_US READY LL HL_UM PLAIN BW LL HL_LM PLAIN BW LL HL_US PLAIN BW LL HL_UM PLAIN CL LL HL_LM PLAIN CL LL HL_US PLAIN CL LL WARMUP FUMON HL_US T LL WARMUP FUMOFF LL WARMUP END TIME LL HL_UM HEAVY LL HL_LM HEAVY LL HL_US HEAVY LL HL_UM OHP LL HL_LM OHP LL HL_US OHP LL HL_UM ENVELOPE LL HL_LM ENVELOPE LL HL_US ENVELOPE LL HL_UM GLOSS LL HL_LM GLOSS LL HL_
36cpm machine Item/Display A B C D E F G H I J K L M N O P Q R S T U V W X Y Z AA AB AC AD AE AF AG AH AI AJ AK AL AM AN HL_UM READY LL HL_LM READY LL HL_US READY LL HL_UM PLAIN BW LL HL_LM PLAIN BW LL HL_US PLAIN BW LL HL_UM PLAIN CL LL HL_LM PLAIN CL LL HL_US PLAIN CL LL WARMUP FUMON HL_US T LL WARMUP FUMOFF LL WARMUP END TIME LL HL_UM HEAVY LL HL_LM HEAVY LL HL_US HEAVY LL HL_UM OHP LL HL_LM OHP LL HL_US OHP LL HL_UM ENVELOPE LL HL_LM ENVELOPE LL HL_US ENVELOPE LL HL_UM GLOSS LL HL_LM GLOSS LL HL_US GLO
43-21 Purpose Adjustment/Setup Function (Purpose) Used to set the environment correction under high temperature and high humidity (H/H) for the fusing temperature setting (SIM 43-1) in each paper mode. Section Operation/Procedure 1) Select an item to be set with scroll keys. 2) Enter the set value with 10-key. 3) Press [OK] key. The set value in step 2 is saved.
* Item WARMUP END TIME HH: 1 Count = 1s Change Correction value for the other items: 1 count for 1C change Code descriptions TH_UM TH_LM TH_US Fusing thermistor main (Front surface of paper) Fusing thermistor main (Back surface of paper) Fusing thermistor sub (Front surface of paper) HL_UM HL_LM HL_US Heater lamp main (Heat roller for front surface of paper) Heater lamp main (Heat roller for back surface of paper) Heater lamp sub (Heat roller for front surface of paper) 23cpm machine Item/Display A B C
26cpm/31cpm machine Item/Display A HL_UM READY HH B HL_LM READY HH C HL_US READY HH D HL_UM PLAIN BW HH E HL_LM PLAIN BW HH F HL_US PLAIN BW HH G HL_UM PLAIN CL HH H HL_LM PLAIN CL HH I HL_US PLAIN CL HH J WARMUP FUMON HL_US T HH K L M N O P Q R S T U V W X Y Z AA WARMUP FUMOFF HH WARMUP END TIME HH HL_UM HEAVY HH HL_LM HEAVY HH HL_US HEAVY HH HL_UM OHP HH HL_LM OHP HH HL_US OHP HH HL_UM ENVELOPE HH HL_LM ENVELOPE HH HL_US ENVELOPE HH HL_UM GLOSS HH HL_LM GLOSS HH HL_US GLOSS HH HL_UM E
Item/Display AT HI_WU_JOB_SET_TMP_HH_B W Setting range Content Correction value (BW) for Job enable TH_UM temperature when Warm-Up at alpha C or above under HH environment 1 - 99 Default value Group Group Group A B C 40 45 50 * Item WARMUP END TIME HH: 1 Count = 1s Change Correction value for the other items: 1 count for 1C change Code descriptions TH_UM TH_LM TH_US Fusing thermistor main (Front surface of paper) Fusing thermistor main (Back surface of paper) Fusing thermistor sub (Front surface of
Item/Display AR LO_WU_JOB_SET_TMP_HH AS AT JOBEND_FUMON_TIME LL HI_WU_JOB_SET_TMP_HH_B W Content Correction value for Job Enable TH_UM temperature in Warm-Up at alpha C or below under HH environment Correction value for the after rotation time when completing a job under HH environment Correction value (BW) for Job enable TH_UM temperature when Warm-Up at alpha C or above under HH environment Setting range 1 - 99 Default value 45 1 - 99 1 - 99 50 45 * Item WARMUP END TIME HH: 1 Count = 1s Change
23cpm machine Item/Display A B C D HL_UM PLAIN BW DUP LL HL_LM PLAIN BW DUP LL HL_US PLAIN BW DUP LL PLAIN BW DUP APP CNT LL E F G H I HL_UM PLAIN CL DUP LL HL_LM PLAIN CL DUP LL HL_US PLAIN CL DUP LL PLAIN CL DUP APP CNT LL HL_UM HEAVY BW DUP LL J K HL_LM HEAVY BW DUP LL HL_US HEAVY BW DUP LL L HEAVY BW DUP APP CNT LL M N O P HL_UM HEAVY CL DUP LL HL_LM HEAVY CL DUP LL HL_US HEAVY CL DUP LL HEAVY CL DUP APP CNT LL Content Correction value for upper TH_UM Black-White plain paper duplex under LL en
36cpm machine Item/Display A B C D HL_UM PLAIN BW DUP LL HL_LM PLAIN BW DUP LL HL_US PLAIN BW DUP LL PLAIN BW DUP APP CNT LL E F G H I HL_UM PLAIN CL DUP LL HL_LM PLAIN CL DUP LL HL_US PLAIN CL DUP LL PLAIN CL DUP APP CNT LL HL_UM HEAVY BW DUP LL J K HL_LM HEAVY BW DUP LL HL_US HEAVY BW DUP LL L HEAVY BW DUP APP CNT LL M N O P HL_UM HEAVY CL DUP LL HL_LM HEAVY CL DUP LL HL_US HEAVY CL DUP LL HEAVY CL DUP APP CNT LL Content Correction value for upper TH_UM Black-White plain paper duplex under LL en
43-23 Purpose Adjustment/Setup Function (Purpose) Used to set the environment correction under high temperature and high humidity (H/H) for the fusing temperature setting (SIM 43-4) in each paper mode. Section Correction value: -49 - +49, Input value: Actually inputted value (1 99) Operation/Procedure 1) Select an item to be set with scroll keys. 2) Enter the set value with 10-key. 3) Press [OK] key. Correction value Input value -49 1 -25 25 -5 45 0 50 The set value in step 2) is saved.
Code descriptions TH_UM TH_LM TH_US Fusing thermistor main (Front surface of paper) Fusing thermistor main (Back surface of paper) Fusing thermistor sub (Front surface of paper) HL_UM HL_LM HL_US Heater lamp main (Heat roller for front surface of paper) Heater lamp main (Heat roller for back surface of paper) Heater lamp sub (Heat roller for front surface of paper) 26cpm/31cpm machine Item/Display A B C D HL_UM PLAIN BW DUP HH HL_LM PLAIN BW DUP HH HL_US PLAIN BW DUP HH PLAIN BW DUP APP CNT HH E F G H
43-24 Purpose Adjustment/Setup Function (Purpose) Used to set the correction of the temperature adjustment value of SIM 43-1 and 434. Section Correction value: -49 - +49, Input value: Actually inputted value (1 99) Operation/Procedure 1) Select an item to be set with scroll keys. 2) Enter the set value with 10-key. 3) Press [OK] key. Correction value Input value -49 1 -25 25 -5 45 0 50 5 55 25 75 49 99 The set value in step 2 is saved.
List of destination groups Group Group A Group B Group C JAPAN U. S. A EUROPE – CANADA U. K Destination – INCH AUS.
26cpm/31cpm machine Item/Display A NN_120_FUS_DUP_HL_UM B NN_120_FUS_DUP_HL_LM C LL_120_FUS_DUP_HL_UM D LL_120_FUS_DUP_HL_LM E HH_120_FUS_DUP_HL_UM F HH_120_FUS_DUP_HL_LM G H I J K L M NN_120_FUS_DUP_CNT LL_120_FUS_DUP_CNT HH_120_FUS_DUP_CNT COOL_DOWN_HEAVY COOL_DOWN_OHP COOL_DOWN_ENVELOPE NN_120_FUS_DUP_HL_US N LL_120_FUS_DUP_HL_US O HH_120_FUS_DUP_HL_US P Q R S T U V W X Y Z AA AB AC HL_UM THIN PAPER BW HL_LM THIN PAPER BW HL_US THIN PAPER BW HL_UM THIN PAPER CL HL_LM THIN PAPER CL HL_U
36cpm machine Item/Display A B C D E F G H I J K L M N O P Q R S T U V W X Y Z AA AB AC AD NN_120_FUS_DUP_HL_UM NN_120_FUS_DUP_HL_LM LL_120_FUS_DUP_HL_UM LL_120_FUS_DUP_HL_LM HH_120_FUS_DUP_HL_UM HH_120_FUS_DUP_HL_LM NN_120_FUS_DUP_CNT LL_120_FUS_DUP_CNT HH_120_FUS_DUP_CNT COOL_DOWN_HEAVY COOL_DOWN_OHP COOL_DOWN_ENVELOPE FUSER MOTOR NN_120_FUS_DUP_HL_US LL_120_FUS_DUP_HL_US HH_120_FUS_DUP_HL_US HL_UM THIN PAPER BW HL_LM THIN PAPER BW HL_US THIN PAPER BW HL_UM THIN PAPER CL HL_LM THIN PAPER CL HL_US THIN PA
43-31 Purpose 44 Adjustment/Setup Function (Purpose) Used to check the operation of the fusing web cleaning. (36cpm machine) Section Fusing Press [EXECUTE] key. When cleaning the fusing web is completed, "COMPLETE" is displayed. The set value may be changed for a design change or an individual arrangement. Except for the above cases, however, the set value must not be changed. If it is changed, a trouble may be occur.
Item/ Display TN_EMP Content Setting of Enable/ Disable of the toner falling distance detection control Setting of Enable/ Disable of the toner falling distance detection control of job interruption Setting of Enable/ Disable of the new toner cartridge falling distance detection control Setting of Enable/ Disable of execution of revision of the yield count conversion table for the toner supply control in the halftone process control Auto registration adjustment Enable/ Disable setting Auto registration adj
Classification REGIST Item/Display X Y Z REG_F PATCH (Y) REG_R PATCH (K) REG_R PATCH (C) AA REG_R PATCH (M) AB REG_R PATCH (Y) Error name Black sensor adjustment abnormality Color sensor adjustment abnormality Substrate scan abnormality Registration sensor F adjustment abnormality Registration sensor R adjustment abnormality Registration substrate F scan abnormality Registration substrate R scan abnormality Content Toner patch detection level F (Y) in the registration adjustment Toner patch de
44-9 Purpose Operation data display Function (Purpose) Used to display the result data of the high density process control operation. Section Image process (Photoconductor/Developing/Transfer/Cleaning) Operation/Procedure Select a target display mode with [CPY/PRN], [OTHER] keys.
Mode OTHER Item/Display (*: Correction value) CRUM CNT Content DESTINATION MODEL TYPE CRUM DEST_K CRUM DEST_C CRUM DEST_M CRUM DEST_Y PROCON COUNT HV PROCON COUNT HT 0-1 - Default value 0 - 0 - 99999999 0 - 99999999 0 0 Display range CRUM destination (Main unit data) Machine model type CRUM destination (CRUM data) High density process control number of executions Halftone process control number of executions 44-12 44-13 Operation data display Purpose Adjustment/Setup Purpose Function (Purpo
Item/Display HUMIDITY TH1_LSU Content Process control humidity sensor detection level LSU thermistor detection level (A/D value) (C) Display range Humidity: 5.0-90.0% (0.1%), AD value: 0-1023 Temperature: 5.0-60.0C (0.1C) AD value: 0-255 44-22 Purpose Operation data display Function (Purpose) Used to display the toner patch density level in the halftone process control operation. Process Section Operation/Procedure 1) 44-15 Purpose Select the display mode with [1ST STEP],[2ND STEP] key.
44-25 44-27 Purpose Purpose Setting Function (Purpose) Used to set the calculating conditions of the correction value for the halftone process control. Process Section Section 1) 1) Select a target adjustment color with [K] [C] [M] [Y] key. 2) 2) Select a target adjustment density level with scroll key on the touch panel. Enter the set value with 10-key. 4) Press [OK] key. Press [EXECUTE] key. Press [YES] key. The correction data of the halftone process control are cleared.
Mode Process control Enable/Disable setting Item/Display A INITIAL B SW ON C D E Setting of the execution conditions of the process control Content YES NO When supplying the power (when canceling power shut-off) TIME After passing the specified time from leaving READY continuously (Time can be changed by INTERVAL TIME) HUM_LIMIT HUM judgment is made when turning ON the power and after passing INTERVAL TIME.
Mode Setting of the execution conditions of the process control Setting of the execution condition of the registration adjustment Item/Display Content L LO-COV M TonerCA-END N AVERAGE-PAGE O LIMIT PAGE Setting of the execution judgment of the process control in continuous printing of low print ratio images Setting of the process control interval reduction when the toner cartridge remaining quantity is 25% or less (If this is set to Enable, item M RATIO is changed.
Mode Setting of the secondary transfer cleaning conditions Content Setting range Secondary transfer cleaning process time judgment threshold value 1 (The total number of sheets for cleaning execution conditions) (Cleaning time: Short) Secondary transfer cleaning process time judgment threshold value 2 (The total number of sheets for cleaning execution conditions) (Cleaning time: Medium) Secondary transfer cleaning process time judgment threshold value 3 (The total number of sheets for cleaning execution
Current DV Bias voltage Low speed mode Heavy paper mode Middle speed mode High speed mode Monochrome mode Time (T) from termination of continuous outputs to start of the next output operation Low speed mode Heavy paper mode Middle speed mode High speed mode Monochrome mode less than 300 [v] 300 [v] or more, less than 450 [v] 450 [v] or more less than 300 [v] 300 [v] or more, less than 450 [v] 450 [v] or more less than 300 [v] 300 [v] or more, less than 450 [v] 450 [v] or more Less than 10 [sec] & afte
Display/Item PROCON HIGH QUALITY1 MODE 44-61 Purpose Adjustment Function (Purpose) Used to adjust the color image density sensor. (The adjustment is made according to the input of SIM44-13 to set the target value of the color sensor gain adjustment.) HIGH QUALITY2 PRINT PERFORMANCE Section Operation/Procedure 1) BW MODE Select an adjustment target item with scroll key. 2) Enter the set value with 10-key. 3) Press [OK] key. (The set value is saved.
Item/Display G MAP Map H LIGHT Light document I TEXT(COPY TO COPY) Text (Copy document) J TEXT/PRINTED PHOTO (COPY TO COPY) PRINTED PHOTO (COPY TO COPY) Text/Printed Photo (Copy document) Printed Photo (Copy document) Text (Color tone enhancement) K L M N O P Q R S TEXT (COLOR TONE ENHANCEMENT) TEXT/PRINTED PHOTO (COLOR TONE ENHANCEMENT) TEXT/PHOTO (COLOR TONE ENHANCEMENT) PRINTED PHOTO (COLOR TONE ENHANCEMENT) PHOTOGRAPH (COLOR TONE ENHANCEMENT) MAP (COLOR TONE ENHANCEMENT) SINGLE COLOR
Item/Display I J K L LOW HIGH LOW HIGH Setting range 1 - 99 1 - 99 1 - 99 1 - 99 Default value 50 50 50 50 LOW HIGH 1 - 99 1 - 99 50 50 LOW HIGH 1 - 99 1 - 99 50 50 Content TEXT (COPY TO COPY) Text (Copy document) TEXT/PRINTED PHOTO (COPY TO COPY) PRINTED PHOTO (COPY TO COPY) Text/Printed Photo (Copy document) Printed Photo (Copy document) Light document LIGHT 46-5 Purpose Section Operation/Procedure 1) Select an adjustment target item with scroll key on the touch panel.
46-8 46-10 Purpose Purpose Adjustment (Color scanner mode) Function (Purpose) Used to adjust the image send mode color balance RGB. Adjustment Function (Purpose) Used to adjust the copy color balance and the gamma (for each color copy mode). Section Section Operation/Procedure Operation/Procedure 1) 1) Select an adjustment target mode with the touch panel key. 2) Select an adjustment target color with [K][C][M][Y] keys on the touch panel.
Density level (Point) Point 1 Point 2 Point 3 Point 4 Point 5 Point 6 Point 7 Point 8 Point 9 Point 10 Point 11 Point 12 Point 13 Point 14 Point 15 Point 16 Point 17 Item/Display A B C D E F G H I J K L M N O P Q POINT1 POINT2 POINT3 POINT4 POINT5 POINT6 POINT7 POINT8 POINT9 POINT10 POINT11 POINT12 POINT13 POINT14 POINT15 POINT16 POINT17 Setting range Default value 1 - 999 1 - 999 1 - 999 1 - 999 1 - 999 1 - 999 1 - 999 1 - 999 1 - 999 1 - 999 1 - 999 1 - 999 1 - 999 1 - 999 1 - 999 1 - 999 1 - 999 50
Item/Display B K (0: ENABLE 1: DISABLE) C CYAN MAX TARGET D MAGENTA MAX TARGET E YELLOW MAX TARGET F BLACK MAX TARGET Content 0 K engine highest density correction mode: Enable 1 K engine highest density correction mode: Disable Scanner target value for CYAN maximum density correction Scanner target value for MAGENTA maximum density correction Scanner target value for YELLOW maximum density correction Scanner target value for BLACK maximum density correction Setting range 0-1 Default value 1 0
When the adjustment value is increased, the image contrast of character edge and line edge is increased. When the adjustment value is decreased, the image contrast of character and line edge is decreased. When the adjustment values of items B, D, and F are increased, the image density of text and line edge section is decreased, and vice versa.
Item/Display CHROMA (Chroma adjustment) A RED / BLACK B KS:CHROMATIC Red extraction mode (The red recognition area is adjusted.) Chromatic color extraction mode (The chromatic color recognition area is adjusted.) 46-37 0-6 C - Default value M - Y - 0-6 - - - Setting range Content Function (Purpose) Used to adjust the black component amount in the color copy mode. Section Section Operation/Procedure Operation/Procedure 1) Select a target item with scroll keys on the touch panel.
Item/Display (Copy mode) MANUAL COPY ORG/ PHOTO Select button (-) LUT2 (-) LUT1 NOMAL (+) LUT1 (+) LUT2 (-) LUT2 (-) LUT1 NOMAL (+) LUT1 (+) LUT2 (-) LUT2 (-) LUT1 NOMAL (+) LUT1 (+) LUT2 (-) LUT2 (-) LUT1 NOMAL (+) LUT1 (+) LUT2 (-) LUT2 (-) LUT1 NOMAL (+) LUT1 (+) LUT2 (-) LUT2 (-) LUT1 NOMAL (+) LUT1 (+) LUT2 (-) LUT2 (-) LUT1 NOMAL (+) LUT1 (+) LUT2 (-) LUT2 (-) LUT1 NOMAL (+) LUT1 (+) LUT2 (-) LUT2 (-) LUT1 NOMAL (+) LUT1 (+) LUT2 LIGHT ORIGINAL AUTO AUTO0 AUTO1 AUTO2 AUTO3 AUTO4 AUTO5 AUTO6
46-42 46-43 Purpose Purpose Adjustment/Setup Function (Purpose) Used to adjust the FAX send image density. (Fine) Adjustment/Setup Function (Purpose) Used to adjust the FAX send image density. (Super Fine) Section Section Operation/Procedure Operation/Procedure 1) Set the document on the document table. 1) Set the document on the document table. 2) Enter the set value with 10-key. 2) Enter the set value with 10-key.
46-44 46-45 Purpose Purpose Adjustment/Setup Function (Purpose) Used to adjust the FAX send image density. (Ultra fine) Adjustment/Setup Function (Purpose) Used to adjust the FAX send image density. (600dpi). Section Section Operation/Procedure Operation/Procedure 1) Set the document on the document table. 1) Set the document on the document table. 2) Enter the set value with 10-key. 2) Enter the set value with 10-key.
18cpm/20cpm/23cpm/31cpm(G) machine 46-46 Purpose Adjustment/Setup Function (Purpose) Used to adjust the FAX send image density. (RGB RIP) (26cpm/36cpm/31cpm(A) machine) Section Operation mode FILLING (COLOR) (COPY (COLOR mode))*1 Item/Display A COPY (C) LOW MIDDLE Operation/Procedure 1) HIGH Select a target mode for adjustment. 2) Set the document on the document table. 3) Enter the set value with 10-key. 4) Press [OK] key. When the set value is increased, the density becomes higher.
26cpm/36cpm/31cpm(A) machine Operation mode FILLING (COLOR) Filing (Color mode) Item/Display A FILLING (C) LOW MIDDLE HIGH FILLING (GRAY) Filing (Monochrome halftone mode) B FILLING (G) LOW MIDDLE HIGH PRINT HOLD (COLOR) Print hold (Color mode) C PRINT (C) LOW MIDDLE HIGH PRINT HOLD (GRAY) Print hold (Monochrome halftone mode) D PRINT (G) LOW MIDDLE HIGH Content Low compression (Color) Medium compression (Color) High compression (Color) Low compression (Halftone) Medium compression (
46-51 46-54 Purpose Purpose Adjustment/Setup Adjustment Function (Purpose) Used to adjust the gamma for the copy mode heavy paper mode and the image process mode. Function (Purpose) Used to perform the engine halftone automatic density adjustment (dither). Section Operation/Procedure Operation/Procedure 1) 1) Select a target adjustment mode with the touch panel key [PAPER/DITHER]. 2) Select an adjustment target color with [K][C][M][Y] keys on the touch panel.
46-55 Purpose Adjustment/Setup MONO Function (Purpose) Used to adjust the drop out color in the image send mode (monochrome manual text mode). (26cpm/36cpm/31cpm(A) machine) Section Operation/Procedure In the image send mode (monochrome manual text mode), the range where color images are reproduced as monochrome images is adjusted.
Scanning direction MAIN Item (copy mode) COLOR COPY K COLOR COPY C COLOR COPY M COLOR COPY Y MONO COPY K COLOR PRINT K COLOR PRINT C COLOR PRINT M COLOR PRINT Y MONO PRINT K Adjustment button (-)2 (-)1 0 (+)1 (+)2 (-)2 (-)1 0 (+)1 (+)2 (-)2 (-)1 0 (+)1 (+)2 (-)2 (-)1 0 (+)1 (+)2 (-)2 (-)1 0 (+)1 (+)2 (-)2 (-)1 0 (+)1 (+)2 (-)2 (-)1 0 (+)1 (+)2 (-)2 (-)1 0 (+)1 (+)2 (-)2 (-)1 0 (+)1 (+)2 (-)2 (-)1 0 (+)1 (+)2 Content Color copy For BLACK Default value 0 Color copy For CYAN 0 Color copy For MA
Scanning direction SUB Item (copy mode) COLOR COPY K COLOR COPY C COLOR COPY M COLOR COPY Y MONO COPY K COLOR PRINT K COLOR PRINT C COLOR PRINT M COLOR PRINT Y MONO PRINT K Adjustment button (-)2 (-)1 0 (+)1 (+)2 (-)2 (-)1 0 (+)1 (+)2 (-)2 (-)1 0 (+)1 (+)2 (-)2 (-)1 0 (+)1 (+)2 (-)2 (-)1 0 (+)1 (+)2 (-)2 (-)1 0 (+)1 (+)2 (-)2 (-)1 0 (+)1 (+)2 (-)2 (-)1 0 (+)1 (+)2 (-)2 (-)1 0 (+)1 (+)2 (-)2 (-)1 0 (+)1 (+)2 Content Color copy For BLACK Default value 0 Color copy For CYAN 0 Color copy For MAG
46-60 Purpose Adjustment/Setup Function (Purpose) Used to adjust the sharpness in the color auto copy mode. Section Operation/Procedure 1) Select a target item with scroll keys on the touch panel. 2) Input numeric value corresponding to sharpness level (filter process mode). 3) Press [OK] key. This is used to adjust the sharpness in the color auto copy mode and the smoothness (roughness) in the dark area.
46-61 Item/Display Purpose Adjustment/Setup Function (Purpose) Used to adjust the area separation recognition level. Section P SEGMENT: ADJUST [SCR 1 HIGH] Q SEGMENT: ADJUST [SCR 1 MIDDLE] R SEGMENT: ADJUST [SCR 1 LOW] S SEGMENT: ADJUST [SCR 2] SEGMENT: ADJUST [SCR 3] SEGMENT: ADJUST [LINE HALFTONE] Operation/Procedure 1) Select an adjustment mode. 2) Select a target adjustment item with scroll key on the touch panel. 3) Enter the adjustment value using the 10-key. 4) Press [OK] key.
Item/Display Content J AE_JUDGE _LV_L_U K AE_JUDGE LV_L_O L AE_JUDGE_ LV_C Color AE background density threshold value adjustment (lower limit) Color AE background density threshold value adjustment (upper limit) Color AE background detection level adjustment (chroma) AE mode ON/ ON OFF switch: OFF For color copy AE mode ON/ ON OFF switch: OFF For monochrome copy AE mode ON/ ON OFF switch : OFF For color scan AE mode ON/ ON OFF switch : OFF For monochrome copy Blank judgment level adjustment (value)
Item/Display H I J K L M N O P Content COLOR COPY : TEXT/PRINTED PHOTO (COPY TO COPY) COLOR COPY : TEXT (COPY TO COPY) COLOR COPY : PRINTED PHOTO (COPY TO COPY) COLOR PUSH : TEXT/PRINTED PHOTO COLOR PUSH : TEXT COLOR PUSH : PRINTED PHOTO COLOR PUSH : PHOTOGRAPH COLOR PUSH : TEXT/PHOTO COLOR PUSH : MAP Copy document, Character print (color copy) Copy document, Character (color copy) Copy document, Printed photo (color copy) Text print (color PUSH) Text (color PUSH) Printed photo (color PUSH) Photograph
46-66 Purpose Adjustment/Setup Function (Purpose) Used to adjust the reproduction capability of watermarks in the copy/printer mode. (26cpm/36cpm/31cpm(A) machine) Section Operation/Procedure This is to adjust the reproduction capability of watermarks in the copy/printer mode. 1) Select the adjustment mode. 2) Select an adjustment item according to the necessity. 3) Enter the adjustment value with 10-key and press [OK] key. 4) Make a copy, and check the adjustment result.
Item/Display COPY MODE POSITION Content A TEXT/PRINTED PHOTO B TEXT C PRINTED PHOTO Printed Photo mode select Enable/Disable D PHOTOGRAPH Photograph mode select Enable/Disable E TEXT/PHOTO F MAP Text/Photograph mode select Enable/ Disable Map mode select Enable/Disable G LIGHT H TEXT/PRINTED PHOTO (CPY TO CPY) I TEXT (CPY TO CPY) J PRINTED PHOTO (CPY TO CPY) K AUTO L DEFAULT MODE A LINE SPACE 1 B LINE SPACE 2 C LINE SPACE 3 D LINE SPACE 4 E BLANK H/B 1 F BLANK H/B 2
46-74 Purpose 46-90 Purpose Adjustment Function (Purpose) Copy color balance adjustment (Auto adjustment)/Printer color balance adjustment (Auto adjustment) Adjustment Function (Purpose) Used to set the process operation of highcompression PDF images. (26cpm/36cpm/31cpm(A) machine) Section Section Operation/Procedure Operation/Procedure This simulation is used to perform SIM46-24 and SIM67-24 continuously. 1) Select a target adjustment mode.
Item Display Content A SEGMENT PARAM COMMON SPECIAL B BG: JPEG QUALITY LV [COL: COMPACT] C BG: JPEG QUALITY LV [COL: ULTRA FINE] D BG: JPEG QUALITY LV [GRY: COMPACT] E BG: JPEG QUALITY LV [GRY: ULTRA FINE] F FG: TARGET AREA G FG: TEXT DENSITY [COL] H FG: TEXT DENSITY [GRY] I ULTRA FINE MODE TYPE0 TYPE1 TYPE2 OFF Description Area separation setting select JPEG recompression level adjustment [Color: High compression mode] JPEG recompression level adjustment [Color: Ultra fine mode] J
48-6 Mode Purpose Adjustment Function (Purpose) Used to adjust the rotation speed of each motor. Section Operation/Procedure Item/Display COLOR* F PFM COLOR* G POM HEAVY F FUSER SETTING RRM START RRM END 1) Select an adjustment target mode with [COLOR] [MONO] [HEAVY] keys on the touch panel. HEAVY G 2) Select a target adjustment item with scroll key on the touch panel. HEAVY H 3) Enter the set value with 10-key. 4) Press [OK] key.
Item/Display Content PCL (CONFIG) PCL (PROFILE) PCU (BOOT) PCU (MAIN) DESK (BOOT) DESK (MAIN) FIN (BOOT) FIN (MAIN) SCU (BOOT) SCU (MAIN) FAX (BOOT) FAX (MAIN) ANIMATION WEB HELP PCL Configuration data PCL Color profile PCU Boot section PCU Main section Desk unit boot section Desk unit main section Inner finisher boot section Inner finisher main section SCU Boot section SCU Main section FAX1 Boot section FAX1 Main section Animation data WEB help Error display in case of abnormality PCLC PCLP PCUB PCUM D
A. (RRC-A) Timing from starting document scanning to specifying the image lead edge reference is adjusted. (01.mm/step) 50 * When the value is decreased, the timing is advanced. When the value is increased, the timing is delayed. 50-1 Purpose B - F. (RRC-B) Timing of paper (registration roller ON) for the image position on the transfer belt is adjusted. (0.1mm/step) Adjustment * When the value is decreased, the timing is delayed. When the value is increased, the timing is advanced.
4) Press [EXECUTE] key. (The set value is saved.) 5) Make a copy at the magnification ratio of 100%, and adjust the rear edge void. Item/Display A Actual measurem ent value B C L2 Image loss area setting value D E L1 LEAD SIDE Void area adjustment DENA F DENB G FRONT/ REAR Description Distance from the image lead edge to the scale of 10mm. (Platen 400%, 0.1mm increment) Distance from the paper lead edge to the image lead edge (0.
50-5 Purpose Adjustment Function (Purpose) Used to adjust the print lead edge image position. (PRINTER MODE) Section Operation/Procedure 1) Select a target adjustment item (DEN-C) with scroll key on the touch panel. 2) Enter the adjustment value using the 10-key. 3) Press [EXECUTE] key. The set value is saved, and the adjustment check pattern is printed.
50-6 50-7 Purpose Purpose Adjustment Function (Purpose) Used to adjust the copy image position and the image loss. (RSPF mode) Section RSPF Operation/Procedure 1) Adjustment Function (Purpose) Used to adjust the copy image position and the image loss (RSPF mode). (This simulation is a simplified version of SIM 50-6.) (18cpm/20cpm/23cpm/31cpm(G) machine) RSPF Section Select an adjustment target item with scroll key on the touch panel. Operation/Procedure 2) Enter the set value with 10-key.
50-10 Purpose Adjustment Function (Purpose) Used to adjust the black print image magnification ratio and the off-center position. (The adjustment is made separately for each paper feed section.) Section Operation/Procedure 1) Select an adjustment target item with scroll key on the touch panel. 2) Enter the set value with 10-key. 3) Press [EXECUTE] key. (The set value is saved.
50-20 Purpose Adjustment Function (Purpose) Image registration adjustment (Main scanning direction) Section Operation/Procedure 1) Select an adjustment target item with scroll key on the touch panel. 2) Enter the set value with 10-key. 3) Press [EXECUTE] key. (The set value is saved.
50-22 Purpose Adjustment Function (Purpose) Used to adjust the image registration. (Main scan direction, sub scan direction) (Auto adjustment)/OPC drum phase adjustment (Auto adjustment) Section Operation/Procedure 1) Press [EXECUTE] key. The adjustment is automatically performed, and the adjustment data are displayed. The contents of the following list are mainly used by the technical division, and are not necessary for the market.
Item/Display MAIN F MAIN R SUB SKEW - REG_M_F (VALUE) () REG_M_F (DIF) - REG_M_R (VALUE) () REG_M_R (DIF) - REG_SUB (VALUE) () REG_SUB (DIF) CMY SKEW_CLC ALL_ ROTATE PHASE Color/ History CMY/- Default value 100 -199.0 - 199.0 (0.1) CMY/- 0 1.0 - 199.0 (0.1) CMY/- 100 -199.0 - 199.0 (0.1) CMY/- 0 1.0 - 199.0 (0.1) CMY/- 100 -199.0 - 199.0 (0.1) CMY/- 0 L99.9 - R99.9 (0.
50-24 Purpose (This simulation is normally not used in the market.) Function (Purpose) Used to display the detail data of SIM 44-2, 50-20, 21 and 22. Section Operation/Procedure This simulation is mainly used by the technical division, and is not necessary for the market. 50-27 Purpose Adjustment Function (Purpose) Used to perform the image loss adjustment of scanned images in the FAX or image send mode. Section Operation/Procedure 1) Select a target adjustment mode with [FAX] or [SCANNER] key.
50-28 Purpose Adjustment Function (Purpose) Used to automatically adjust the image loss, void area, image off-center, and image magnification ratio. Section Operation/Procedure The following adjustment items can be executed automatically with SIM50-28.
[RSPF] Mode SIDE1 SIDE2 ENGINE Display/Ite A NORMAL_PLAIN_HIGH B NORMAL_PLAIN_LOW C NORMAL_THIN _HIGH D NORMAL_THIN _LOW E RANDOM_PLAIN_HIGH F RANDOM_PLAIN _LOW G RANDOM_THIN_HIGH H RANDOM_THIN_LOW A NORMAL_PLAIN_ HIGH_1 B NORMAL_PLAIN_ LOW_1 A TRAY1(S) B TRAY1(L) C TRAY1 HEAVY PAPER (S) D TRAY1 HEAVY PAPER (L) E TRAY2(S) F TRAY2(L) G TRAY2 HEAVY PAPER (S) H TRAY2 HEAVY PAPER (L) I MANUAL PLAIN PAPER (S) J MANUAL PLAIN PAPER (L) K MANUAL HEAVY PAPER (S) L MANUA
Mode Display/Ite ENGINE P ADU PLAIN PAPER (L) Q ADU HEAVY PAPER (S) R ADU HEAVY PAPER (L) S DESK (S) T DESK (L) U DESK HEAVY PAPER (S) DESK HEAVY PAPER (L) A4LCC V W Setting range Content ADU/deflection adjustment value (Plain paper/Large size) ADU/deflection adjustment value (Heavy paper/Small size) ADU/deflection adjustment value (Heavy paper/Large size) DESK/deflection adjustment value (Plain paper/Small size) DESK/deflection adjustment value (Plain paper/Large size) DESK/deflection adju
53-8 55-3 Purpose Purpose Adjustment Function (Purpose) Used to adjust the document lead edge reference and the RSPF mode document scan position. (Do not use this function unless specially required.) Function (Purpose) Used to set the specifications of the controller operation. (SOFT SW) Section Section Operation/Procedure Operation/Procedure Select an adjustment item with [AUTO] [MANUAL] key.
PWB Type PCU 56 56-1 Backup Purpose Function (Purpose) Used to transport data between HDD - MFP PWB SRAM/EEPROM. (Used to repair the PWB.) Section Operation/Procedure 1) Select a target content of data transfer. 2) Press [EXECUTE] key and press [YES] key. Data transfer of the item selected in procedure 1) is executed. When the operation is completed normally, "COMPLETE" is displayed. In case of an abnormal end, "ERROR" is displayed.
56-5 Purpose Adjustment/Setting/Operation data check Function (Purpose) Used to import the SIM22-6 data to a USB memory in the TEXT format. Result display COMPLETE NO DATA Operation/Procedure ERROR (EXPORT DATA ILLEGAL) ERROR (LOW LEVEL BLOCK READ ERROR) 1) Insert the USB memory into the main unit. ERROR (NO DATA ADJUSTMENT) 2) Select a kind of data to be imported. ERROR (SD ACCESS ERROR) 3) Press [EXECUTE] key, and press [YES] key.
61-3 Purpose Adjustment/Setup Function (Purpose) Used to set the laser power Section Operation/Procedure 1) Select a target mode for adjustment with [COPY], [PR600/ FAX] on the touch panel. 2) Select an adjustment target item with scroll key on the touch panel. 3) Enter the adjustment value using the 10-key. 4) Press [OK] key. (The set value is saved.) When the laser power and the DUTY adjustment value are increased, the print density is increased and the line width of line images are increased.
Mode PR600/FAX Item/Display L M N O P Q R S T U V W X Y Z AA AB AC AD AE AF AG AH AI AJ AK AL AM AN LASER POWER LOW (C2) LASER POWER LOW (M1) LASER POWER LOW (M2) LASER POWER LOW (Y1) LASER POWER LOW (Y2) LASER POWER MIDDLE (BW1) LASER POWER MIDDLE (BW2) LASER POWER LOW (BW1) LASER POWER LOW (BW2) LASER DUTY MIDDLE (K) LASER DUTY MIDDLE (C) LASER DUTY MIDDLE (M) LASER DUTY MIDDLE (Y) LASER DUTY LOW (K) LASER DUTY LOW (C) LASER DUTY LOW (M) LASER DUTY LOW (Y) LASER DUTY MIDDLE (BW) LASER DUTY LOW (BW) LASE
Mode PR600/FAX Item/Display A B C D E F G H I J K L M N O P Q R S T U V W X Y Z AA AB AC AD AE AF AG AH AI AJ AK AL AM AN LASER POWER MIDDLE (K1) LASER POWER MIDDLE (K2) LASER POWER MIDDLE (C1) LASER POWER MIDDLE (C2) LASER POWER MIDDLE (M1) LASER POWER MIDDLE (M2) LASER POWER MIDDLE (Y1) LASER POWER MIDDLE (Y2) LASER POWER LOW (K1) LASER POWER LOW (K2) LASER POWER LOW (C1) LASER POWER LOW (C2) LASER POWER LOW (M1) LASER POWER LOW (M2) LASER POWER LOW (Y1) LASER POWER LOW (Y2) LASER POWER MIDDLE (BW1) LAS
Mode COPY PR600/FAX PR1200 Item/Display X Y Z AA AB AC AD A B C D E F G H I J K L M N O P Q R S T U V W X Y Z AA AB AC AD AE AF AG AH AI AJ AK AL AM AN A B C D E F G H I J K L M N O P Q R S T U LASER DUTY MIDDLE (Y) LASER DUTY LOW (K) LASER DUTY LOW (C) LASER DUTY LOW (M) LASER DUTY LOW (Y) LASER DUTY MIDDLE(BW) LASER DUTY LOW (BW) LASER POWER MIDDLE (K1) LASER POWER MIDDLE (K2) LASER POWER MIDDLE (C1) LASER POWER MIDDLE (C2) LASER POWER MIDDLE (M1) LASER POWER MIDDLE (M2) LASER POWER MIDDLE (Y1) LASER
Mode PR1200 Item/Display V W X Y Z AA AB AC AD LASER DUTY MIDDLE (C) LASER DUTY MIDDLE (M) LASER DUTY MIDDLE (Y) LASER DUTY LOW (K) LASER DUTY LOW (C) LASER DUTY LOW (M) LASER DUTY LOW (Y) LASER DUTY MIDDLE(BW) LASER DUTY LOW (BW) Setting range Content Laser DUTY select middle speed (C) Laser DUTY select middle speed (M) Laser DUTY select middle speed (Y) Laser DUTY select low speed (K) Laser DUTY select low speed (C) Laser DUTY select low speed (M) Laser DUTY select low speed (Y) Laser DUTY select midd
62-8 62-13 Purpose Purpose Data clear Function (Purpose) Used to format the hard disk/SD Card. (HDD: Excluding the Operation Manual, the watermark data, and the system area) (SD Card: User data) Section Section Operation/Procedure 1) Operation/Procedure 1) Press [EXECUTE] key. 2) Press [YES] key. Data clear Function (Purpose) Used to format the hard disk. (Operation Manual, watermark data only) 2) Press [EXECUTE] key. Press [YES] key. The operation manual data are deleted.
62-20 Purpose Operation test/check Function (Purpose) Used to check the operation of the mirroring hard disk. (26cpm/36cpm/31cpm(A) machine) Item/ Display ERROR CODE Content Error code (0, 1-14) (for debug) 3 Mirroring hard disk Section NOTE 0 1 2 Operation/Procedure 4 Enter the simulation mode, and the operation status of the HDD is displayed. 5 6 7 8 9 The status display is renewed in every second.
63-4 Purpose Adjustment/Setting/Operation data check Function (Purpose) Used to display the SIT chart patch density. This simulation is executed only when the copy color balance is manually adjusted. Section B C D E F G H I J K L M N O BASE Operation/Procedure 1) Set the SIT chart (UKOG-0280FCZZ or UKOG-0280FCZ1) to the reference position on the left rear frame side of the document table. 2) Press [EXECUTE] key. The patch of the SIT chart is scanned.
64 64-1 Operation test/check Purpose Function (Purpose) Test print. (Self print) (Color mode) Section Operation/Procedure 1) Set the print conditions. Select an item to be print condition with scroll keys. Set the print conditions with 10-key. Select a target print color with [K] [C] [M] [Y] key. 2) Press [EXECUTE] key. The test print (self print) is performed.
Pattern No. 21 22 29 (26cpm/36cpm/ 31cpm(A) machine) Content 4-point dot print (main scan) Slant line Dot print 1200dpi Pattern generating section LSU-ASIC LSU-ASIC LSU-ASIC NOTE • For every 1/4 of the main scanning direction paper size, print is made for each color. • When N=0, print of all the background is made in 4 colors. M = 1 (Fixed), N = 1 or 3 64-2 Operation test/check Purpose Function (Purpose) Test print.
Pattern No. Content 17 18 19 21 22 29 (26cpm/36cpm/ 31cpm(A) machine) All background (halftone) 256 gradations pattern (Other dither) 256 gradations pattern (For text dither) 4-point dot print (main scan) Slant line Dot print 1200dpi Pattern generating section Halftone (IMG-ASIC rear process) NOTE – – – LSU-ASIC • For every 1/4 of the main scanning direction paper size, print is made for each color. • When N=0, print of all the background is made in 4 colors.
64-5 Purpose Operation test/check Function (Purpose) Printer test print. (Self print) (PCL) Section Operation/Procedure 1) Set the print conditions. Select an item to be print condition with scroll keys. Set the print conditions with 10-key. Select a target print color with [K] [C] [M] [Y] key. 2) Press [EXECUTE] key. The test print (self print) is performed.
64-6 Purpose Operation test/check Function (Purpose) Printer test print. (Self print) (PS) Section Operation/Procedure 1) Set the print conditions. Select an item to be print condition with scroll keys. Set the print conditions with 10-key. Select a print color with [K] [C] [M] [Y] key. 2) Press [EXECUTE] key. The test print (self print) is performed.
64-7 65-2 Purpose Purpose Operation test/check Operation check/test Function (Purpose) Used to print the adjustment pattern of the test print. (Self print). (The adjustment pattern of SIM46-21 is printed.) Function (Purpose) Used to display the touch panel (LCD display section) detection coordinates. Section Operation/Procedure Operation/Procedure Touch the touch panel. 1) The coordinates X (horizontal direction) and Y (vertical direction) of the touched position is displayed in real time.
66 66-1 Purpose Setting Function (Purpose) Used to display the FAX-related soft SW (2 - 150) on the LCD to allow changing the soft SW while checking with the LCD. Section FAX Operation/Procedure 1) Enter the [SW NO] with 10-key. * When [C] key is pressed, the entered value of [SW NO] is cleared. 2) Press [DATA] button. The soft SW data entered in procedure 1) is displayed. * When [SW NO] button is pressed, the display returns to the initial screen.
Check item 66-6 1 Check memory item All Memory Device Check (once) 2 3 4 5 6 7 8 9 MFP SRAM (once) *1 MFP SRAM (repeat) *1 MFP FLASH + OP.FLASH (once) *1 MFP FLASH + OP.FLASH (repeat) *1 MODEM EEPROM <1> (once) MODEM EEPROM <1> (repeat) MODEM SDRAM <1> (once) MODEM SDRAM<1>(repeat) Remark All the items are checked once.
66-9 66-12 Purpose Purpose Operation test/Check Function (Purpose) Used to send the selected sound message to the line and the speaker. (Send level: Soft SW setting) * For details of sound messages, refer to the sound message table of SIM66-08. Section FAX Operation/Procedure Section 1) When the machine enters Simulation 66-09, the following screen is displayed.
66-15 Purpose 66-21 Purpose Adjustment Function (Purpose) Used to execute the dial pulse (20PPS) send test and to adjust the make time. Section Section FAX Check Function (Purpose) Used to print the selected items (system error, protocol monitor). FAX Operation/Procedure Operation/Procedure 1) When the machine enters Simulation 66-15, the following screen is displayed.
66-29 66-32 Purpose Purpose Clear Function (Purpose) Used to initialize the telephone book data (the one-touch registration table, the FTP/ Desktop expansion table, the group expansion table, the program registration table, the interface memory box table, the meta data, InboundRouting, and the DocumentAdmin table).
66-36 66-43 Purpose Purpose Operation test/Check Function (Purpose) Used to check send and receive data from the MODEM controller to the MFP controller or the data line or the command line individually. FAX Section 1) 2) Section When the machine enters Simulation 66-36, the following screen is displayed. Operation check 2) When [EXECUTE] key is pressed, it is highlighted and writing to the power control is executed. When writing is normally completed, "OK" is displayed.
67 67-17 Purpose Reset Function (Purpose) Printer reset Section Printer Operation/Procedure 1) Press [EXECUTE] key. 2) Press [YES] key. The set data related to the printer are initialized. (Including the NIC setting.) When the operation is completed, [EXECUTE] key returns to the normal display.
67-27 67-33 Purpose Purpose Adjustment/Setup Function (Purpose) Used to set the service target of the printer mode auto color balance adjustment. Section Adjustment/Setup Function (Purpose) Used to change the gamma of the printer screen. Section Printer Printer Operation/Procedure Operation/Procedure 1) Press [SETUP] key on the touch panel. 1) 2) Place the printed color balance adjustment pattern sheet printed in SIM 67-25 on the document table.
26cpm/36cpm/31cpm(A) machine Display HEAVY PAPER SCREEN1 SCREEN2 SCREEN3 SCREEN4 SCREEN5 SCREEN6 SCREEN7 SCREEN8 SCREEN9 SCREEN10 67-36 Content Purpose Heavy paper 600dpi 1bit Photo 600dpi 1bit Graphics 600dpi 4bit Photo 600dpi 4bit Graphics 1200dpi 1bit Photo 1200dpi 1bit Graphics B/W 600 dpi 1bit B/W 600 dpi 4bit B/W 1200dpi 1bit Gloss 600 dpi 4bit Adjustment/Setup Function (Purpose) Used to adjust the density in the low density section.
67-52 67-54 Purpose Purpose Adjustment/Setup Function (Purpose) Used to set the default of the gamma of the printer screen. Section Printer Adjustment Function (Purpose) Printer color balance adjustment (Automatic adjustment for each dither (The adjustment is disable in a GDI printer.)) Printer Operation/Procedure Section 1) Select a target default setting mode with the touch panel. Operation/Procedure Press [ALL] key to select all the modes.
[6] TROUBLESHOOTING D. Self diag operation Service Manual 1. Error code and troubleshooting When the machine recognizes a trouble, it stops the operation and displays the trouble message. A. General A warning message is displayed when a consumable part life is nearly expired or is expired. MX-3610N The machine always monitors its own state.
E.
Operatable mode Trouble content Laser trouble • LSU breakdown Engine trouble 1 • Connection trouble (Model data discrepancy) (PCU detection) • PCU troubles (motor, fusing, etc.
23cpm/26cpm/31cpm/36cpm machine Trouble content FAX board trouble • FAX board breakdown HDD trouble • SD card breakdown • HDD breakdown • HDD-ASIC breakdown • SCU communication error • PCU communication error • ACU communication error • Printer port system trouble • Backup battery voltage fall Scanner communication trouble Engine communication trouble Option communication trouble Printer port system trouble Backup battery voltage fall trouble Operation disable trouble 1 Operation disable trouble 2 Op
Trouble content Laser trouble • LSU breakdown Engine trouble 1 • Connection trouble (Model data discrepancy) (PCU detection) • PCU troubles (motor, fusing, etc.
Judgment block Trouble content Operation disable trouble SCU CPT ASIC trouble SCU ASIC trouble (SCU detection) Scanner trouble 1 Scanner trouble 2 CCD trouble • Connection trouble (Model data discrepancy) (SCU detection) • SCU CPT ASIC error • SCU ASIC error (SCU detection) SCU • SCU EEPROM error • Scanner section breakdown (mirror motor, lens, copy lamp) • CCD breakdown (shading, etc.
(2) Trouble detection sequence and trouble cancel sequence when turning on the power MFP event manager (Power ON sequence) H3, H4, H5, U1, U2, U6, F3 trouble check Trouble check is preformed in each block, and the result is sent to the MFP. H3, H4, H5 U1 U2 U6-09 F3-12, 22 When the power is turned on, check is made in each block.
F.
Trouble code Main Sub code code F1 19 20 21 31 32 F2 F3 F6 F9 H2 Trouble content 91 92 Finisher alignment operation trouble F Finisher alignment operation trouble R Finisher fan trouble Finisher saddle motor trouble (Saddle stitch finisher) Communication error between the finisher and the punch unit (Saddle stitch finisher) Punch unit shift operation trouble Punch operation trouble Punch paper edge detection error Finisher data backup RAM error Punch data backup RAM error Punch paper dust sensor erro
Trouble code Main Sub code code H3 00 01 02 H4 00 01 02 H5 01 H7 10 11 L1 00 L3 00 L4 02 03 04 05 06 07 11 12 16 31 32 34 35 43 50 51 L6 10 L8 01 20 P1 00 01 02 PC U1 01 U2 00 05 05 U6 U7 UC 10 11 24 30 40 41 42 50 60 80 81 90 91 00 01 02 09 10 20 21 22 50 51 52 50 51 02 20 Trouble content Fusing section high temperature trouble (TH_UM) Fusing section high temperature trouble (TH_LM) Fusing section high temperature trouble (TH_US) Fusing section low temperature trouble (TH_UM_AD2) Fusing section low tem
G. Details of error codes and countermeasures A0-01 PCU PWB ROM error Trouble content Detail Cause Check & Remedy A0-11 MFP The firmware version-up is not completed properly by interruption of the power during the version-up operation, etc. PCU PWB trouble. Use SIM49-1 to perform the firmware version-up procedure again. Replace the PCU PWB.
A0-21 Conflict firmware and EEPROM data version (PCU) Trouble content Detail Cause Check & Remedy A0-22 Conflict firmware and EEPROM data version (SCU) Trouble content Detail Cause Check & Remedy C1-10 Check & Remedy PTC trouble (TC high voltage trouble) Trouble content Detail Cause Check & Remedy SCU Inconsistency between the SCU firmware version and the EEPROM data version. Check the combination of the firmware.
E7-03 HDD trouble / Mirroring kit error Trouble content Detail Cause Check & Remedy E7-04 HDD-ASIC error Trouble content Detail Cause Check & Remedy E7-07 MFP HDD-ASIC trouble. (MFPC PWB trouble.) An error occurs in the HDD-ASIC self test when booting. Check or replace the MFPC PWB. Shading error (White correction) Trouble content Detail Cause Check & Remedy E7-14 Trouble content Detail Cause Check & Remedy E7-20 Check & Remedy MFP SD card trouble or contact error MFPC PWB trouble.
E7-22 LSU laser detection error (M) Trouble content Detail Cause Check & Remedy E7-23 PCU Laser optical axis misalignment Reduced laser power, lighting error, laser diode trouble. LSU harness, connector trouble LSU trouble Use SIM61-1 to check the operation of the LSU. Check or replace the LSU control PWB. Check connection of the LSU harness. Replace the LSU.
E7-42 Image data trouble (Scanner expansion PWB (ACRE) ASIC) Trouble content Detail Cause Check & Remedy E7-46 Image data decode error (Scanner expansion PWB (ACRE) ASIC) Trouble content Detail Cause Check & Remedy E7-48 MFP A decode error occurs while high compression PDF images are made. (garbled data) Scanner expansion PWB (ACRE) connection trouble. Scanner expansion PWB (ACRE) trouble. MFPC PWB trouble. Check connection of the scanner expansion PWB (ACRE).
E7-80 MFP - SCU PWB communication error Trouble content Detail Cause Check & Remedy E7-89 Detail Cause Check & Remedy E7-90 No response can be obtained from the energy-saving NIC controller. MFP MFPC PWB trouble. Replace the MFPC PWB. Detail Cause Check & Remedy E7-93 Check & Remedy MFP PCU PWB - MFPC PWB connection trouble. PCU PWB trouble. MFPC PWB trouble. Check connection of the PCU PWB and the MFPC PWB. Check the ground. Replace the PCU PWB. Replace the MFPC PWB.
E7-96 MFPC PWB DIMM memory check error Trouble content Detail Cause Check & Remedy E7-A0 LSU LD PWB EEPROM read/write error (M) Trouble content Detail Cause Check & Remedy LSU LD PWB EEPROM read/write error (K) Trouble content Detail Cause Check & Remedy E7-A1 MFPC PWB DIMM memory access trouble MFP Memory data corruption occurs MFPC PWB trouble DIMM memory trouble or contact error Use SIM60-01 to check the read/write operations of the memory. Replace the MFPC PWB.
EE-EU Automatic toner density adjustment error (Under toner) Trouble content Detail Cause Check & Remedy F1-00 Finisher - PCU PWB communication error Trouble content Detail Cause Check & Remedy F1-03 PCU Connection trouble of the connector and the harness between the finisher and the PCU PWB. Finisher control PWB trouble. PCU PWB trouble. Check the connector and the harness between the finisher and the PCU PWB. Replace the finisher control PWB. Replace the PCU PWB.
F1-20 Finisher alignment operation trouble R Trouble content Detail Cause Check & Remedy F1-21 PCU Finisher paper alignment motor lock. Motor speed abnormality. Over-current to the motor. Finisher control PWB trouble. Home position sensor trouble. Use SIM3-3 to check the operation of the paper alignment motor R. Use SIM3-2 to check the operation of the home position sensor. Replace the finisher control PWB. Replace the paper alignment motor R. Replace the home position sensor.
F1-37 Finisher data backup RAM error Trouble content Detail Cause Check & Remedy F1-45 Saddle staple trouble Trouble content PCU Finisher control PWB trouble. Malfunction due to noises Replace the finisher control PWB. Readjust the finisher. (Use SIM3-10, Finisher control PWB DIP SW adjustment.) Detail Cause Check & Remedy F1-38 Punch data backup RAM error Trouble content Detail Cause Check & Remedy F1-39 Check & Remedy PCU Punch dust sensor trouble. Harness and connector connection trouble.
F2-24 Discharge lamp trouble (M) Trouble content Detail Cause Check & Remedy F2-25 Discharge lamp trouble (Y) Trouble content Detail Cause Check & Remedy F2-39 Check & Remedy Trouble content Detail Cause Check & Remedy F2-43 PCU Process thermistor trouble. Process thermistor harness connection trouble. PCU PWB trouble. Replace the process thermistor. Check connection of the process thermistor harness and the connector. Replace the PCU PWB.
F2-50 K drum phase sensor trouble Trouble content Detail Cause Check & Remedy F2-51 Check & Remedy Trouble content Detail Cause Check & Remedy PCU Drum phase sensor trouble. Drum phase sensor harness and connector connection trouble Drum drive section trouble. PCU PWB trouble. Use SIM30-1 to check the operation of "DHPD_CL". Replace the drum phase sensor. Check connection of the drum phase sensor harness and the connector. Repair the drum drive section. Replace the PCU PWB.
F2-71 Improper toner cartridge detection (C) Trouble content Detail Cause Check & Remedy F2-72 Improper toner cartridge detection (M) Trouble content Detail Cause Check & Remedy F2-73 Check & Remedy Trouble content Detail Cause Check & Remedy F2-77 Trouble content Detail Cause Check & Remedy F2-78 PCU An improper toner cartridge is inserted. (The main unit detects a toner cartridge of a different specification.) Toner cartridge trouble. PCU PWB trouble. Replace the toner cartridge.
F2-93 High density process control high voltage error (M) Trouble content Detail Cause Check & Remedy F2-94 High density process control high voltage error (Y) Trouble content Detail Cause Check & Remedy F3-12 Check & Remedy Check & Remedy Section Case 1 Cause Check and Remedy Case 2 Cause Case 4 LUD2 does not turn ON within the specified time. PCU LUD2 does not turn ON within the specified time. CLUD2 sensor trouble. Paper feed tray 2 lift unit trouble. PCU PWB trouble.
F6-97 Incompatibility between FAX control PWB and the main machine Trouble content Section Case 1 Cause Check and Remedy F6-98 Incompatibility between FAX control PWB and the main machine MFP The FAX control PWB installed is improper. FAX control PWB trouble. Install a proper FAX control PWB. Replace the FAX control PWB.
H3-00 Fusing section high temperature trouble (TH_UM) Trouble content Detail Cause Check & Remedy H3-01 Fusing section low temperature trouble (TH_UM_AD2) Trouble content PCU The fusing temperature exceeds the specified level. Thermistor trouble PCU PWB trouble Thermistor connector and harness connection trouble HL control PWB trouble Use SIM44-14 to check the state of the thermistor. Use SIM5-2 to check the flashing operation of the heater lamp. Use SIM14 to cancel the trouble.
H4-02 Fusing section low temperature trouble (TH_US) Trouble content Detail Cause Check & Remedy H5-01 5 times continuous POD1 not-reach jam Trouble content Detail Cause Check & Remedy H7-10 The fusing temperature does not reach the specified level within the specified time from turning ON the power relay. PCU Thermistor trouble. Heater lamp trouble. PCU PWB trouble. Thermostat trouble. Connector, harness connection trouble. HL control PWB trouble. Power unit trouble.
L4-02 Paper feed motor trouble Trouble content Detail Cause Check & Remedy L4-03 Detail Cause Check & Remedy Trouble content Detail Cause Check & Remedy The motor lock signal is detected during rotation of the fusing motor. PCU Fusing motor trouble Fusing motor harness and connector connection trouble PCU PWB trouble Use SIM6-1 to check the operation of the fusing motor. Replace the Fusing motor. Check connection of the fusing motor harness and the connection. Replace the PCU PWB.
L4-12 Secondary transfer separation trouble Trouble content Detail Cause Check & Remedy L4-16 Fusing pressure release trouble Trouble content Detail Cause Check & Remedy L4-31 A change in the fusing pressure release sensor signal cannot be detected within the specified time after outputting the fusing pressure release motor. PCU Fusing pressure release sensor trouble. Fusing pressure release motor trouble. Pressure release drive gear and pressure release idle gear trouble. PCU PWB trouble.
L6-10 Polygon motor trouble Trouble content Detail Cause Check & Remedy L8-01 The polygon motor does not reach the specified RPM within the specified time after starting rotation of the polygon motor. PCU Polygon motor trouble. LSU mother PWB trouble. Connection trouble of the connector and the harness. Use SIM61-1 to check the operation of the polygon motor. Check connection of the connector and the harness. Replace the LSU. Replace the LSU mother PWB.
U2-05 HDD/MFPC PWB SRAM contents inconsistency (18cpm/20cpm/23cpm/31cpm(G) machine) Trouble content Detail Cause Check & Remedy U2-05 Erroneous detection of account management data / HDD internal authentication DB table error (26cpm/36cpm/31cpm(A) machine) Trouble content Detail Cause Check & Remedy U2-10 The HDD or the MFPC PWB installed is improper. (Erroneous detection of account management data) MFP The HDD was replaced. The MFPC PWB was replaced.
U2-41 HDD system storage data area error Trouble content Detail Cause Check & Remedy U2-42 Machine adjustment data storage data area) error Trouble content Detail Cause Check & Remedy U2-50 MFP A file error occurs in the HDD system saved data area, disabling backup of the saved file of the machine adjustment values in the SD card. HDD trouble MFPC PWB trouble Check the HDD, and replace if necessary. Check the MFPC PWB, and replace if necessary.
U2-91 PCU PWB EEPROM check sum error Trouble content Detail Cause Check & Remedy U6-00 Check & Remedy Trouble content PCU PCU PWB EEPROM trouble PCU PWB trouble EEPROM socket contact trouble Replace the PCU PWB EEPROM. Replace the PCU PWB. Check contact of the EEPROM socket. Use SIM16 to cancel the trouble. (The check sum error detection data are calculated again to reset the proper check sum data.) Detail Cause Check & Remedy PCU Connection trouble of the connector and the harness.
U6-21 LCC transport motor trouble Trouble content Detail Cause Check & Remedy U6-22 Detail Cause Check & Remedy Trouble content Detail Cause Check & Remedy U7-50 The power voltage of DC24V is not supplied to the LCC unit. PCU Connection trouble of the harness and the connector between the machine and the LCC and those of the LCC control PWB.
(1) Descriptions on E7-91 - 94 errors Two-digit numbers with double parentheses are added to E7-91 - 94 error codes recorded in SIM22-6 indicate the detailed contents of the errors. The number in each digit has its own meaning. (Example) E7-91(**) The upper digit of the added code indicates the job kind at the occurrence of the error.
(2) Countermeasures in case of E7-91 - 94 (3) In case of E7-9x (11), E7-9x (21), E7-9x (31), E7-9x (41) Cause Check and remedy In case of E7-91 - 94, the DIMM memory (DRAM) is automatically read/written to perform a simplified check. If an abnormality is detected in that case, the added code becomes (*1). Therefore, there is a strong possibility that an abnormality lies around the memory. • Check the installing state of the DIMM memory and the MFPC PWB to insure that there is no abnormality.
(4) Relation between the MFPC PWB LED status and errors When the machine cannot be booted, check the LED status of the MFPC PWB to presume the error content and its cause.
2. JAM and troubleshooting A.
JAM detection method PPD1 remaining JAM (Main cassette paper) PPD1 remaining JAM (Main cassette 2 feed paper) PPD1 remaining JAM (Desk upper stage feed paper) PPD1 remaining JAM (Desk lower stage feed paper) PPD1 remaining JAM (Manual feed tray feed paper) CPFD1 OFF PPD1 OFF 149.9 65.0 JAM detection distance (A+B) [mm] 214.9 CPFD1 OFF PPD1 OFF 149.9 65.0 214.9 CPFD1 OFF PPD1 OFF 149.9 65.0 214.9 CPFD1 OFF PPD1 OFF 149.9 65.0 214.9 PPD1 ON PPD1 OFF 65.
CPUC2 ON CPFD2 ON 103.4 65.0 JAM detection distance (A+B) [mm] 168.4 Reception of the paper feed start command from DESK (At position 45mm from the final roller of the DESK.) Reception of the paper feed start command from DESK (At position 45mm from the final roller of the DESK.) MPFS ON CPFD2 ON 35.5 65.0 100.5 CPFD2 ON 35.5 65.0 100.5 PPD1 ON 83.2 65.0 148.2 CPFD1 ON PPD1 ON 151.9 65.0 216.9 CPFD1 ON PPD1 ON 149.6 65.0 214.6 CPFD1 ON PPD1 ON 149.6 65.0 214.
JAM detection method PPD2 remaining JAM (Main cassette feed paper) PPD2 remaining JAM (Main cassette 2 feed paper) PPD2 remaining JAM (Desk upper stage feed paper) PPD2 remaining JAM (Desk lower stage feed paper) PPD2 remaining JAM (Manual feed tray feed paper) PPD2 remaining JAM (ADU refeed paper) POD1 remaining JAM POD2 remaining JAM (When left paper exit) POD2 remaining JAM (When ADU reversing) PPD1 OFF PPD2 OFF 62.9 65.0 JAM detection distance (A+B) [mm] 127.9 PPD1 OFF PPD2 OFF 62.9 65.0 127.
JAM detection method JAM code PPD1_N2 PPD1_N3 PPD1_N4 PPD1_NA PPD1_NL PPD2_N1 PPD2_N2 PPD2_N3 PPD2_N4 PPD2_NM PPD2_NA PPD2_NL POD1_N POD2_N POD3_N APPD1_N APPD2_N CPFD1_S1 CPFD1_S2 CPFD1_S3 CPFD1_S4 CPFD2_S2 CPFD2_S3 JAM content PPD1 not-reached JAM (Main cassette 2 feed paper) PPD1 not-reached JAM (Desk upper stage feed paper) PPD1 not-reached JAM (Desk lower stage feed paper) PPD1 not-reached JAM (ADU refeed paper) PPD1 not-reached JAM (LCC feed paper) PPD2 not-reached JAM (Main cassette feed paper) PP
JAM detection method PPD2 remaining JAM (Desk lower stage feed paper) PPD2 remaining JAM (Manual feed tray feed paper) PPD2 remaining JAM (ADU refeed paper) PPD2 remaining JAM (LCC feed paper) POD1 remaining JAM POD2 remaining JAM (When left paper exit) POD2 remaining JAM (When ADU reversing) PPD1 OFF PPD2 OFF 62.9 65.0 JAM detection distance (A+B) [mm] 127.9 PPD1 OFF PPD2 OFF 61.4 65.0 126.4 PPD1 OFF PPD2 OFF 61.4 65.0 126.4 PPD1 OFF PPD2 OFF 62.9 65.0 127.
Reception of the paper feed start command from DESK (At position 45mm from the final roller of the DESK.) MPFS ON CPFD2 ON 35.5 65.0 JAM detection distance (A+B) [mm] 100.5 PPD1 ON 113.2 65.0 178.2 CPFD1 ON PPD1 ON 151.9 65.0 216.9 CPFD1 ON PPD1 ON 149.6 65.0 214.6 CPFD1 ON PPD1 ON 149.6 65.0 214.6 CPFD1 ON PPD1 ON 149.6 65.0 214.6 APPD2 ON PPD1 ON 133.3 65.0 198.3 Reception of the paper feed start command from LCC (Extension amount 19mm position) CPFD1 ON PPD1 ON 141.
JAM detection method JAM code JAM content PPD1_SL PPD1 remaining JAM (LCC refeed paper) PPD2_S1 PPD2 remaining JAM (Main cassette feed paper) PPD2 remaining JAM (Main cassette 2 feed paper) PPD2 remaining JAM (Desk upper stage feed paper) PPD2 remaining JAM (Desk lower stage feed paper) PPD2 remaining JAM (Manual feed tray feed paper) PPD2 remaining JAM (ADU refeed paper) PPD2 remaining JAM (LCC feed paper) POD1 remaining JAM POD2 remaining JAM (When left paper exit) POD2 remaining JAM (When ADU revers
(5) RSPF JAM detection method JAM code JAM content SPPD1_N SPPD1 not-reached JAM SPPD2_N SPPD2 not-reached JAM SPPD3_N SPPD4_N SPPD2_NR SPPD1_S SPPD2_S SPPD3_S SPPD4_S SPPD2_SR SPSD_SCN SPPD3 not-reached JAM SPPD4 not-reached JAM SPPD2 reverse notreached JAM SPPD1 remaining JAM SPPD2 remaining JAM SPPD3 remaining JAM SPPD4 remaining JAM SPPD2 reverse remaining JAM Exposure start notification timer end Paper feed start (When the document width is more than B5 size.
(7) LCC JAM code LCC LPFD_SL JAM content Side LCC paper feed JAM (LPFD not-reached) LPFD remaining JAM (Side LCC feed paper) JAM detection start trigger LPFC ON (paper feed start) LPFD ON JAM detection method JAM judgment condition LPFD does not turn ON within the specified time. LPFD does not turn OFF within the specified time.
JAM code FSTPLJ JAM content Staple JAM FPNCHJ Punch JAM FIN_TIME Finisher paper early reaching JAM FIN_PAOF Paper attribute data reception overflow FPATPD_S Saddle transport remaining JAM FPPD3_N Saddle paper exit notreached JAM Saddle paper exit remaining JAM FPPD3_S FSSMJ FDRLMJ FSDMJ Stapler shift motor JAM Paper exit roller lift motor JAM Saddle motor JAM JAM detection method JAM detection start JAM judgment condition trigger Driving the staple FSHS ON is not detected within the motor
JAM code FGMJ FSPTMJ JAM content Gripper motor JAM Saddle paper transport motor JAM JAM detection method JAM detection start JAM judgment condition trigger Driving the gripper Change from FGHPS ON to OFF is motor is started. not detected within the specified time during the gripper operation. Change from FGHPS OFF to ON is not detected within the specified time during the gripper operation.
Report code (Communication result) 0 – 31 33 34 Display in the column of result Refer to “previous table”. BUSY CANCEL 35 36 37 38 NG35 XXXX (No record paper) (Record paper jam) MEM.
Report code (Communication result) 75 NG75 XXXX *1 76 NG76 XXXX *1 77 78 NG77 XXXX *1 NG78 XXXX *1 79 80 NG79 XXXX *1 NG80 XXXX *1 81 NG REPORT 82 NO REPORT 83 84 85 NG LIMIT REJECTED NG85 XXXX *1 86 RECEIVED 87 NG87 XXXX *1 88 NG88 XXXX *1 89 NG89 XXXX *1 90 91 NG90 XXXX *1 NG91 XXXX *1 *2 92 NG92 XXXX *1 *2 93 NG93 XXXX *1 94 NG94 XXXX *1 95 96 98 99 NG95 XXXX *1 NG96 XXXX *1 NG98 XXXX *1 NG99 XXXX *1 Display in the column of result Content of communication interruption •
(2) Communication report sub code 1 The communication report sub code 1 (upper 2 digits) are always indicated as "00." (3) Communication report sub code 2 Report code 2 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 60 61 62 63 64 70 71 72 73 74 75 76 80 81 82 83 84 85 86 87 Content of communication interruption When the conditions after 01 do not apply.
Report code 2 88 90 91 92 Content of communication interruption The TIFF type of the attached file in received e-mail cannot be recognized. Data error In e-mail receive, an attached file cannot be stored in memory. Memory over. Cannot be stored in memory. In e-mail receive, an attached file cannot be stored in memory. The file size is too great to be stored in memory. In SMTP e-mail receive, an attached file cannot be stored in memory. Cannot be stored in memory.
MX-3610N [7] FIRMWARE UPDATE Service Manual 1. Outline A. Cases where update is required C. Update procedures and kinds of firmware ROM update is required in the following cases: There are following methods of update of the firmware. 1) When there is a necessity to upgrade the performance. 1) Update method using SIM 49-1 2) When installing a new spare part ROM for repair to the machine.
Execution of the firmware by SIM49-01 5) 1) Insert the media or USB memory which stores the firmware into the main unit. (Be sure to use the USB I/F on the operation panel.) 2) Enter the SIM49-01. Press [EXECUTE] key. “ARE YOU SURE? [YES] [NO]” becomes clear. Press [YES] key to start the update of selected firemware. Press the key of the file to be updated. The screen transfers to the update screen.
B. Firmware update using FTP FTP software is used to transfer the firmware data (extension ".sfu") from the PC to the machine. The controller recognizes the firmware identifier and the machine automatically switches to firmware write mode. After the firmware is updated, the machine automatically resets. Machine 1 Machine 3 10.36.112.83 10.36.112.84 Firmware.sfu Machine 2 Machine 4 FTP Client 10.36.101.52 10.36.101.53 C.
D. Firmware update using the CN update function (There are three methods.) (1) Outline The update method using the DIP SW of the MFP PWB is called the CN update. c. DIP-SW used in the CN update mode To enter the CN update mode, turn ON the UPDATE DIP-SW on the MFP PWB and boot the machine. When terminating the CN update mode, reset UPDATE DIP-SW to OFF (normal mode). a. Function There are the following three functions in the CN update mode.
(2) Operating procedures 6) Select the firmware update mode. Select the update mode with [MENU] key and [BACK] key. a. Firmware update function This function is used to revise the firmware by using the USB memory for the MFP PWB, the SCU PWB, the PCU PWB, the FAX PWB, and each option. Firm Update From USB Memory It is basically same as SIM 49-01, but differs in the following points. 1) The update target ROM is automatically selected.
[8] MAINTENANCE MX-3610N Service Manual 1. Works necessary when executing the maintenance A. Counter check Before execution of the maintenance, execute SIM22 to check the counter values of the following counters to confirm consuming states of each section. 1) Each consumable part counter 2) Each unit counter 3) Trouble counter, JAM counter B. Counter reset When a part or consumable part is replaced with new one in the maintenance, execute SIM24 to reset the following counters.
2. Display of maintenance execution timing The message of maintenance execution timing is displayed when each counter reaches the set value. The relations between the messages and the counters are shown below. A. Maintenance counter Display condition Display content Maintenance required. Code: TA Maintenance required. Code: TA Maintenance required. Code: CA Maintenance required. Code: CA Maintenance required. Code: AA Maintenance required.
* After execution of the maintenance, execute SIM24-4 to clear the fusing roller counter, the fusing belt counter, the fusing web print counter, the accumulated rotation number counter, and the use day counter. E. OPC drum Display condition Display content Maintenance required.: DK SIM26-38-A set value 0 (Print continue) OPC drum print counter (K) Maintenance required.
3. Maintenance list Main unit (18cpm machine) ✕: Check (Clean, replace, or adjust according to necessity.
Section/Unit work sequence 3 Name Transfer section Unit name Primary transfer unit Work sequence Part name When calling 80 k 160 k 240 k 320 k 400 k 480 k 1 2 Separation pawl Primary transfer belt – – ✕ ✕ ✕ ✕ ✕ ✕ 3 Secondary drive transmission gear Primary transfer belt drive roller Primary transfer belt follower roller Primary transfer belt tension roller Registration backup roller Y auxiliary roller PTC backup roller Primary transfer roller Transfer cleaner seals F/R P
Section/Unit work sequence 8 9 Name Tray paper feed section Paper registration section (paper transport section)/ Paper exit section/ ADU section Unit name Tray paper feed unit PS unit Right door unit Other Drive section Main drive unit Transport drive unit Fusing drive unit Paper exit drive unit 11 Fusing section Fusing unit Part name When calling 80 k 160 k 240 k 320 k 400 k 480 k Remark 1 Paper pickup roller ✕ 2 Paper feed roller ✕ 3 Sep