/24/2019 Contents Sharp operation manual ＞ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting 8. Specifications, etc. You can select an OSD language from among 8 languages. English (UK) >> Français >> Deutsch >> Italiano >> Русский >> Español >> Polski >> English (US) >> Ver. 1.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting 8. Specifications, etc. Contents 1. Part Names 1-1. Monitor 1-7. Name of Remote Control Buttons 2. Basic Operation 2-1. Initial Installation 2-3. Basic Operation 2-4. Using Timer 2-5. Listening with Headphones 3. Menu Operation 3-1. How to Use Menu 3-2. How to Use Setup Menu 3-3.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names Part Names Monitor Front 2. Basic Operation 3. Menu Operation Name Page POWER lamp 1 Lit white: operating state Unlit: power-off state 2-3 4. USB Media 5. AQUOS LINK and Other Devices 2 Remote control light receiving section Point the remote control toward this section. ― 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting 8. Specifications, etc. You can select an OSD language from among 8 languages.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names Part Names Monitor Rear 2. Basic Operation 3. Menu Operation 4. USB Media Name 1 3-4 to 4-1 3 USB2 terminal Connect USB memory. You can enjoy photo / music / video files stored in USB memory on the Monitor. You can use the multimedia auto play function. ― 4 INPUT 1 to 4 (HDMI) (INPUT 1: (4K)~4:4:4, INPUT 2/3/4: (4K)~4:2:0) Connect 4K or 2K output HDMI compatible device. 5-1 to 5-9, 5-11, 5-13, 5-14, 5-27, 5-28 5 AUDIO OUTPUT 3.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names Part Names Monitor Rear 2. Basic Operation Name 3. Menu Operation 6 4. USB Media 7 INPUT 7 A to D (HDMI) Connect 8K image output compatible device. Page 5-1, 5-2 INPUT 8 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting 8. Specifications, etc. You can select an OSD language from among 8 languages.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names Part Names Monitor Rear 2. Basic Operation Name 3. Menu Operation 8 4. USB Media 9 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) LAN terminal (10BASE-T／100BASE-TX) Used for home network, etc. INPUT 5 AV INPUT/AUDIO IN FOR INPUT1/INPUT6/INPUT7/INPUT8 Page ― 3-35, 5-15, 5-27, 5-28, 5-29 10 Digital audio output (optical) terminal Connect the audio device.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names Part Names Monitor Rear 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting 8. Specifications, etc. Name Page 12 Power button 2-3 13 MENU button Displays the menu. 3-2 14 INPUT button When in the Menu, this functions as the OK button. 1-6 15 16 forward / backward button When Menu is operated, it is used as and cursor.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names Part Names Monitor Using the button of the Monitor to disable the child lock. 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting 8. Specifications, etc. You can select an OSD language from among 8 languages.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names Part Names Name of Remote Control Buttons 2. Basic Operation 3. Menu Operation 4. USB Media Button name 1 2 POWER Page 2-3 DISPLAY Display the information. ― 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting 8. Specifications, etc. You can select an OSD language from among 8 languages.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names Part Names Name of Remote Control Buttons 2. Basic Operation Button name Number Page 3. Menu Operation 3 4. USB Media 4 AUDIO 2-3 5 VOL +/- ― 5. AQUOS LINK and Other 6 MUTE ― Devices 6. Operating the Monitor Using a PC (IP control) 7 8 Also used to enter characters or numbers and perform the setup operations. INPUT Also used to change the input source to PC, USB media, etc. CH ― 5-18, 5-26 ― 7. Troubleshooting 8.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names Part Names Name of Remote Control Buttons 2. Basic Operation Button name EXIT Page 3. Menu Operation 9 4. USB Media 10 5. AQUOS LINK and Other 11 APPS 3-2 12 MENU 3-44 Devices 6. Operating the Monitor Using a PC (IP control) 13 Used to quit the menu, character entry, etc. / / / , ENTER Used for the menu, character entry, etc. RETURN Used for the menu, character entry, etc. 3-2, 3-45 3-2, 3-45 3-2, 3-45 7.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names Part Names Name of Remote Control Buttons 2. Basic Operation 3. Menu Operation Button name 14 A/B/C/D Operation for character entry Page 3-45 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting 8. Specifications, etc. You can select an OSD language from among 8 languages. English (UK) >> Français >> Deutsch >> Italiano >> Русский >> Español >> Polski >> English (US) >> Ver.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media Basic Operation Initial Installation Perform the following steps before you press POWER on the remote control unit. 1. Insert the batteries into the remote control unit. 2. Plug in the AC cord to the AC outlet. Language (Language setting) Select from among 8 languages: English(UK), English(US), French, Spanish, German, Italian, Russian and Polish. 1.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation Basic Operation Initial Installation (Continue) Location Select your using location from home use or store use. Select where this device is being used, between home use or as a shop display unit 2. Press / to select location, and then press ENTER. 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting 8. Specifications, etc.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices Basic Operation Basic Operation 1. Turn on the Monitor Each time you press the power button on the remote control turn on or off the Monitor. After pressing the power button on the rear side of the Monitor to turn "ON", the POWER lamp turns white. The POWER lamp will not disapper even though the power is turned off by pressing the power button on the Monitor.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media Basic Operation Using Timer Turning off the power after a specified time (Sleep timer) To check the remaining time of the sleep timer Press APPS If the sleep timer has already been set, the remaining time will be displayed. The display of remaining time will disappear after a while. Do not press the APPS during the display of the remaining time. Otherwise, the remaining time will be affected.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names Basic Operation Listening with Headphones Setting up the headphones 2. Basic Operation Sets the audio sound that comes out of the speakers / headphone terminal during the use of headphones. 3. Menu Operation 1. Press MENU to display the home screen 2. Press / / / to select "Setup", and then press ENTER 4. USB Media 3. Press 4. Press 5. Press 5.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation Menu Operation How to Use Menu The screen that serves as a gateway to operating the Monitor is called the "Menu". This section describes how to use Menu. 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting 8. Specifications, etc. You can select an OSD language from among 8 languages.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation Menu Operation How to Use Setup Menu Basic operation for using the setup menu 1. Press MENU to display the Menu, press / to select "Setup", and then press ENTER If / button is pressed, the Menu item can be selected as follows. 4. USB Media Setup Application Input List Link operation 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting 2.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media Menu Operation List of Setup Menu Items Easy Setup When you turn on the Monitor for the first time, the “Easy Setup” screen appears. Configure the setting by following onscreen instructions. Menu item names Language Location 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) 7.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor Menu Operation List of Setup Menu Items Multimedia Autoplay Playback the pictures in the USB memory automatically when power is turned on. Create a folder and name it as "autoplay", then put pictures into this folder.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) Menu Operation List of Setup Menu Items Individual setting (Continue) Standby Mode IP Control is active even during standby. Menu item name Setup Standby Mode No Go into normal standby. Yes (Always) The standby power consumption will increase when "Yes" is selected.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation Menu Operation List of Setup Menu Items Screen display button setting This setting allows you to choose the displayed information when you press DISPLAY. 3. Menu Operation Menu item name Setup Input display Yes, During Input select, No 4. USB Media Input detail Yes, During Input select, No Sound/Screen info. Display Yes, During Input select, No Playback status display Yes, During operation, No 5.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation Menu Operation List of Setup Menu Items Reset Before transferring or disposing the Monitor, erase all of your personal information. The information (various adjustment values, LAN setup, passwords, etc.) will be erased. 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting 8. Specifications, etc.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Menu Operation List of Setup Menu Items AV Mode This function allows you to switch the video and sound to be more suitable for movies, games, etc.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices Menu Operation List of Setup Menu Items Backlight You can adjust the backlight brightness. Setup -16 to 0 to +16 Contrast You can adjust the contrast. Setup 0 to +40 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting 8. Specifications, etc. Brightness You can adjust the brightness.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices Menu Operation List of Setup Menu Items Colour You can adjust the colour saturation. Setup -30 to 0 to +30 Tint You can adjust the colour tint. Setup -30 to 0 to +30 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting 8. Specifications, etc. Sharpness You can adjust the sharpness.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation Menu Operation List of Setup Menu Items Advanced C.M.S.-hue Adjusts six-color hue. Menu item name Setup 4. USB Media 5. AQUOS LINK and Other Devices C.M.S.-hue 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting R -30 to 0 to +30 Y -30 to 0 to +30 G -30 to 0 to +30 C -30 to 0 to +30 B -30 to 0 to +30 M -30 to 0 to +30 Reset C.M.S.-saturation 8. Specifications, etc.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation Menu Operation List of Setup Menu Items Advanced (Continue) C.M.S.-value Adjusts six-color image value. Menu item name Setup 4. USB Media 5. AQUOS LINK and Other Devices C.M.S.-value 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting 8. Specifications, etc. You can select an OSD language from among 8 languages.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Menu Operation List of Setup Menu Items Advanced (Continue) Colour temp. You can make adjustments to make the color blueish white (color temperature; high) or redish white (color temperature: low). In addition, you can adjust the white balance by changing the R / G B gain values on a per-color temperature basis. Menu item name Setup Colour temp.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor Menu Operation List of Setup Menu Items Advanced (Continue) Resolution* High definition video with sharper images Menu item name Setup Details 0 to +10 Narrow edge 0 to +10 Wide edge 0 to +10 HDR-SDR Switch* Menu item name Setup Auto Select HDR/SDR mode automatically. 7.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation Menu Operation List of Setup Menu Items Advanced (Continue) Menu item name Setup 3. Menu Operation Active contrast* On, Off The video contrast can be automatically adjusted according to the scene. 4. USB Media Gamma adjustment* -3 to 0 to +3 The difference in tone between the bright and dark sections of a video image can be adjusted.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting 8. Specifications, etc. Menu Operation List of Setup Menu Items Advanced (Continue) Film mode*1*2*3*4*5 Intended to play back videos, such such as films on a DVD, whose original signal is 24 images per second at high image quality.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation Menu Operation List of Setup Menu Items Advanced (Continue) Range of OPC You can set the desired maximum / minimum values for the operational sensitivity range when the brightness sensor (OPC) is set to "ON". The brightness sensor does not work if the set range is narrow, but it depends on the brightness of the surrounding area. 3. Menu Operation 4. USB Media 5.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation Menu Operation List of Setup Menu Items Auto volume If the volume level differs in the same input, you can set to adjust the volume automatically. 3. Menu Operation Setup High Volume range will be kept very narrow. 4. USB Media Middle Volume range will be kept narrow. 5. AQUOS LINK and Other Low Volume range will be kept slightly narrow. Off This function is disabled. Volume range will be kept as original.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices Menu Operation List of Setup Menu Items Treble You can adjust Treble Setup -15 to 0 to +15 Bass You can adjust Bass Setup -15 to 0 to +15 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting 8. Specifications, etc. Balance You can adjust the balance of the speaker volume for both left and right.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting Menu Operation List of Setup Menu Items Surround It realizes quasi-space surrounding Monitor, which is filled with realistic sensation, with in-built speakers. Setup Auto, On, Off Select surround mode Select the mode when surround setting is enabled.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation Menu Operation List of Setup Menu Items Sound Mode This function enables you to set the sound quality of the picture mode selected. 3. Menu Operation Setup Standard Standard setting. 4. USB Media Dynamic Dynamic sound setting. 5. AQUOS LINK and Other Band extension Expands band area. Devices 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting 8. Specifications, etc.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation Menu Operation List of Setup Menu Items View setting for wall mounting This function is intended to set the sound quality suitable for the wall mount. 3. Menu Operation Menu item name Setup 4. USB Media View setting for wall mounting Yes, No 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) 7.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media Menu Operation List of Setup Menu Items Clear voice When it is difficult to hear the dialogue of a drama or a movie, this setting makes it easier to hear and understand by emphasizing the human voice range. Setup Standard This audio setting sets the audio volume to that of the standard sound quality. Mild It makes sound quality milder than the standard.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor Menu Operation List of Setup Menu Items Power off linked with an ambient brightness When the lighted environment surrounding Monitor gets dark, such as when the room light turns off, Monitor is automatically turned off. Menu item name Set "Cancel" "Set" of the Light reliant power off function. Power off transition time 0min., 15min.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices Menu Operation List of Setup Menu Items Audio only You can hear only audio sound with no video playing. Setup On, Off NOTE It is automatically set to "Off" if you operate to restore video or turn the power off once. To restore video Perform operations other than "Volume adjustment", "Mute" or "Audio change". 6. Operating the Monitor Using a PC (IP control) 7.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices Menu Operation List of Setup Menu Items No signal off Enter standby automitically if no signal is received for 15min. Setup Enable, Disable No operation off Enter standby automatically if no operation is occured for a preset period. Setup Disable, 30min, 1hr.00min., 2hr.00min., 3hr.00min. 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting 8.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation Menu Operation List of Setup Menu Items Screen On Time It is a function that displays the play time every 30 minutes to prevent her / him from losing track of time playing games 3. Menu Operation 4. USB Media It is displayed when the input is changed to INPUT1 to INPUT6. Setup On, Off 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting 8. Specifications, etc.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Menu Operation List of Setup Menu Items Control Lock You can set to lock the operation of the remote control or Monitor. Setup Off, RC control lock, Button control lock NOTE In case you lock the remote control operation by mistake, use Monitor operation button (1-6 page) to unlock. Devices 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting 8.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation Menu Operation List of Setup Menu Items Option for view Menu item name Multi-audio When a program has multiple audio channels, you can switch between the audio channels. 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting 8. Specifications, etc. You can select an OSD language from among 8 languages.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Menu Operation List of Setup Menu Items Option for view (Continue) Menu item name Wide mode Depending on the type of content, the black borders around the monitor can be removed by changing the horizontal or vertical width in the "Wide Mode" setting. This operation can also be performed from the Application.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Menu Operation List of Setup Menu Items Option for view*(Continue) Menu item name AQUOS LINK control Enables operation of an AQUOS LINK device. Manual Displays the built-in Operation Manual. NOTE *This is not selectable while the manual is displayed. Exit the manual before selecting this. Devices 6. Operating the Monitor Using a PC (IP control) 7.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation Menu Operation List of Setup Menu Items AQUOS LINK setup Menu item name Setup 3. Menu Operation AQUOS LINK control On, Off Set it to "Off" if the power supply is turned on or the channel changes automatically when connecting a device that is not AQUOS LINK-enabled. 4. USB Media Auto power on Yes, No Set it to turn on automatically once an AQUOS LINK-enable device is operated.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media Menu Operation List of Setup Menu Items Sleep timer Turn the power off after the specified time has elapsed (page 2-4) Setup Change Off, 0hr.30min., 1hr.00min., 1hr.30min., 2hr.00min., 2hr.30min. No 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting 8. Specifications, etc. You can select an OSD language from among 8 languages.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation Menu Operation List of Setup Menu Items Terminal setting Headphone Switches the audio sound between speakers and headphones during the use of the headphones. Menu item name 4. USB Media 5. AQUOS LINK and Other Using a PC (IP control) 7. Troubleshooting 8. Specifications, etc. Mode1 This is intended to listen to the Monitor with the headphones alone.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices Menu Operation List of Setup Menu Items Terminal setting (Continue) Analogue Audio output setting Changes the analog audio output setting. INPUT1 audio select*1 Switches the audio input terminal for INPUT 1. INPUT6 audio select*2 Sets the audio input for INPUT 6. Menu item name Setup 6.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation Menu Operation List of Setup Menu Items Terminal setting (Continue) Selection of audio sound for INPUT7*1 Sets the audio input for INPUT7. Menu item name 4. USB Media 5. AQUOS LINK and Other Devices INPUT7 audio select 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting 8. Specifications, etc. You can select an OSD language from among 8 languages.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation Menu Operation List of Setup Menu Items Terminal setting (Continue) Input skip Unused inputs (INPUT1 to 4, INPUT6, INPUT7, INPUT8) can be skipped during input change. Menu item name Setup 4. USB Media 5. AQUOS LINK and Other Devices Input skip 6. Operating the Monitor Using a PC (IP control) 7.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation Menu Operation List of Setup Menu Items Terminal setting (Continue) Input label The device names displayed in the input menu, etc. can be changed to the names of the devices connected to INPUT 1 to 8. 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices Menu item name Setup Input label*1 (Entry depends on selection) User Setting: EDIT NOTE *1 It is displayed when the input is changed to INPUT1 to INPUT8. 6.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation Menu Operation List of Setup Menu Items Terminal setting (Continue) Suitable mode for signals Changes the suitable mode for signals in order to maintain compatibility with connected devices. (INPUT 1 only) Menu item name Setup 4. USB Media 5. AQUOS LINK and Other Devices 6.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation Menu Operation List of Setup Menu Items Terminal setting (Continue) 4K signal for each mode Supported frame rate Supported chroma sampling BT.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation Menu Operation List of Setup Menu Items Screen effect Menu item name 3. Menu Operation 4. USB Media Position Setup H-Pos. Adjusts the position of a left-aligned or right-aligned image using / button. V-Pos. Adjusts the position of an image positioned too high or low using / button. Reset Resets to factory default. 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) 7.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation Menu Operation List of Setup Menu Items Screen effect (Continue) Auto Wide According to the type of original video, you can display the video on the screen of the size most suitable for the video. 3. Menu Operation 4. USB Media 5.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting 8. Specifications, etc. Menu Operation List of Setup Menu Items Identification Displays the system status Setup Start, Test pattern Software license Displays software licenses Software update Updates software. Setup USB update Manual Displays E-Manual (operation guide).
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor Menu Operation How to Use Application Menu Basic procedure for using the Application 1. Press APPS to display the Application. You can also use the Application menu by selecting "Application" of the Menu item. 2.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation Menu Operation Entering Letters (Software Keyboard) If you are required to enter letters, use on-screen software keyboard for entry. The software keyboard will be displayed if you select an entry field and press ENTER. Software keyboard screen example 1 (Screen showing predictive conversion candidates, character types, etc. is for illustrative purposes only.) 4. USB Media 5.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation USB Media Before Using USB Media What you can do with USB Media You can play the photo, music or video files stored on USB memory. In addition, you can copy photos to a USB memory . 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting 8. Specifications, etc. You can select an OSD language from among 8 languages.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other USB Media Before Using USB Media About USB memories that can be attached to Monitor Devices that can be connected to USB terminal USB memory, USB card reader (mass storage class) File system FAT, FAT32 NOTE If you attach a USB memory to Monitor with the power on, the USB Media will be displayed. Devices 6. Operating the Monitor Using a PC (IP control) 7.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other USB Media Before Using USB Media About USB memories attached to Monitor How to attach / remove USB memory Do not remove the USB memory from Monitor while transferring files, viewing slide shows, switching screens or before exiting "USB Media" at the input selection menu. Do not insert and remove a USB memory repeatedly without any reason.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media USB Media Before Using USB Media About files in USB memory that can be played on Monitor Photo file format JPEG (jpg) (DCF2.0-compliant) Maximum resolution (image size): 16384 x 16384 pixels Minimum resolution (image size): 32 x 32 pixels If a JPEG still image file is large in size, the file may be required time to display the photo. 5. AQUOS LINK and Other Devices 6.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting 8. Specifications, etc. You can select an OSD language from among 8 languages. USB Media Before Using USB Media About files in USB memory that can be played on Monitor Music file format FLAC (.fla) Bit rate: 128k to 2304kbps Sampling frequency: 8k, 16k, 22.05k, 24k, 32k, 44.1k, 48k, 88.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) USB Media Before Using USB Media About files in USB memory that can be played on Monitor Video file format m2ts, mp4, 3gp NOTE jpeg files in progressive format cannot be supported. 3D-form photos cannot be supported. Music files in USB1.1 device may not be played properly.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor USB Media Enjoying Photo Displaying photo About this function You can display photos on USB memory. NOTE It may take more than 20 seconds to display a photo depending on the pixel size. How to operate 1.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting USB Media Enjoying Photo Displaying photo 4. Press 5. Press / to select a folder, and then press ENTER / / / to select photo, and then press ENTER The photo appears full-screen. If you select a folder, all images in the folder will be displayed.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting USB Media Enjoying Photo Operation during photo display About this function When viewing photos, you can switch to the next photo. A guidance (operation guide) indicating the operation method is displayed at the bottom of the screen.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names USB Media Enjoying Photo 2. Basic Operation Switching photo display mode About this function 3. Menu Operation How to operate 4. USB Media 5. AQUOS LINK and Other You can switch the photo display mode 1. During the display of photo, press APPS, use the / button to select "Screen Size", and then press ENTER 2.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation USB Media Enjoying Photo Enjoying slide show About this function Photos can be displayed as a slide show. The photos from USB memory can be selected to be displayed as slide show. 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting 8. Specifications, etc. You can select an OSD language from among 8 languages.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media USB Media Enjoying Photo Enjoying slide show To play a slide show based on photo list 1. Press INPUT, followed by / to select "USB media" and then press ENTER 2. If more than one USB memory are connected, select desired memory with C 3. Press / to select "Photo Mode", and then press ENTER 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting 8.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices USB Media Enjoying Photo Enjoying slide show To play a slide show based on a photo list. 4. Press / 5. Press C to select a folder, and then press ENTER Photo selection mode will be used to display photos. Press / / / to select the photos to be displayed as a slide show. Press D to toggle between selecting / deselecting the photos.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media USB Media Enjoying Photo Setting up slide show About this function 1. Press APPS on the photo list screen to display the function menu. 2. Press / to select "Slide Show Setup", and then press ENTER 3. Press / to select the setting, and then press ENTER 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting 8. Specifications, etc.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) USB Media Enjoying Photo Setting up slide show Slide show interval Set the time duration before switching to the next picture. Depending on the photo, the display may not be switched according to the set time. Slide show off timer setting Set the timer for the slide show.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting USB Media Enjoying Photo Selecting BGM for a slide show About this function Choosing the music (BGM) that will be played when displaying the slide show. The music stored in the USB memory can be used as BGM. 1. Press B in the slide show picture selection mode. 2.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting 8. Specifications, etc. USB Media Enjoying Photo Copying photo About this function Copying a photo from USB memory to another memory. When copying a photo to an SD memory card, a USB card reader is needed. Attach the USB memory to be used for copying to the Monitor in advance.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting 8. Specifications, etc. You can select an OSD language from among 8 languages. USB Media Enjoying Photo Copying photo To copy photos, more than one USB memories need to be connected. However, only one connection is allowed when setting the USB memory destination. 1.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor USB Media Enjoying Photo Copying photo NOTE The limit for the file name is up to 80 two-byte or 160 one-byte characters. Files name that exceed the limit cannot be copied. If the input source is changed during copying photo, the copying operation will be interrupted.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting 8. Specifications, etc. USB Media Enjoying Photo To remove the USB memory that is used as the copy destination How to operate 1. Press MENU to display the Menu, press 2. Press / / / ENTER 3.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names USB Media Enjoying Photo 2. Basic Operation Deleting photo About this function 3. Menu Operation How to operate 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) You can delete unnecessary photos stored on a USB memory. 1. Press APPS on the photo list screen to display the function menu. 2. Use the / button to select "Delete photo", and then press ENTER 3.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names USB Media Enjoying Music 2. Basic Operation Playing back music About this function 3. Menu Operation How to operate You can play back music file in USB memory. 4. USB Media 1. Press INPUT, followed by 2. Press / 5. AQUOS LINK and Other 3. Press / / / / to select "USB media", and then press ENTER to select "Music Mode", and then press ENTER to select a song title, and then press ENTER Devices 6.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting 8. Specifications, etc. USB Media Enjoying Music Playing music Music is played. When selecting a folder, music files in that folder will be displayed. Press RETURN to display the previous screen.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media USB Media Enjoying Music How to operate during the playback of music Playing music that is store on USB memory. RETURN: Returns to the previous step. A: Plays / stops music playback. B: Stops playing music. D: Selects / deselect the music that will be played. APPS: Displays the function menu. 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) 7.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names USB Media Enjoying Video 2. Basic Operation Playing video About this function 3. Menu Operation How to operate You can play a video from USB memory. 4. USB Media 1. Press INPUT, use 5. AQUOS LINK and Other 2. Press / to select "USB media", and then press ENTER. Once USB memory is connected, "USB media" will be automatically displayed. / to select "Video mode", and then press ENTER Devices 6.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting 8. Specifications, etc. You can select an OSD language from among 8 languages. USB Media Enjoying Video Playing video 3. Use the / / / button to select a video, and then press ENTER The video will be played back.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation USB Media Enjoying Video How to operate during the playback of video 1. Press APPS during the playback of VIDEO to the Application menu. 2. Use the / button to select "Operation Panel," and then press ENTER How to use the operation panel 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting 8. Specifications, etc.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation USB Media Enjoying Video How to operate during the playback of video Operations during the playback of video You can perform operations such as pausing or playing a video. Plays the video. 4. USB Media Pauses the video. 5. AQUOS LINK and Other Fast reverses the video. Press the button down again to speed up.(4 steps) Devices Returns to the beginning of the chapter being viewed now. 6.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting 8. Specifications, etc. You can select an OSD language from among 8 languages.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation AQUOS LINK and Other Devices Connecting 8K output compatible Device Connect four HDMI cables (8K output compatible device) A commercially available premium HDMI cable is required. 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting 8. Specifications, etc. You can select an OSD language from among 8 languages.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) AQUOS LINK and Other Devices Connecting 8K output compatible Device Supported format 7680 × 4320 (24Hz, 25Hz, 30Hz, 50Hz, 60Hz) How to switch to 8K video input Press INPUT on the remote control. During the display of the input change menu, use the and press ENTER.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting AQUOS LINK and Other Devices Connecting 8K output compatible Device Supported audio sound signals Type: Linear PCM Sampling frequency: 48kHz / 44.1kHz / 32kHz How to change the input audio sound Press INPUT on the remote control.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names AQUOS LINK and Other Devices Connecting 4K output compatible Device Connecting a 4K output compatible BD recorder 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting Connecting a 4K output compatible AV amplifier 8. Specifications, etc. You can select an OSD language from among 8 languages.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names AQUOS LINK and Other Devices Connecting 4K output compatible Device Connecting 4K output compatible device 2. Basic Operation Use a PC that supports 4K output (resolution output of 3840 × 2160). 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting 8. Specifications, etc. NOTE You can select an OSD language from among 8 languages.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting 8. Specifications, etc. AQUOS LINK and Other Devices Viewing HDR Video (INPUT1, INPUT7, INPUT8) This Monitor provides support for HDR (High Dynamic Range) supported by “ULTRA HD Blu-rayTM".
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor AQUOS LINK and Other Devices Viewing HDR Video (INPUT1, INPUT7, INPUT8) Adjusting an HDR video to be either brightness-oriented or tone-oriented. 1. Press MENU to display the Menu, use the / / / to select "Setup", and then press ENTER 2. Press / / / to select " (Picture)" - "Advanced", and press ENTER 3.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices AQUOS LINK and Other Devices Using the AQUOS LINK What is AQUOS LINK? HDMI terminals are not limited to video or audio signals but it permits control signals, which allow for device-todevice control, which is transmitted through the HDMI cable.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media AQUOS LINK and Other Devices Using the AQUOS LINK Before using AQUOS LINK functions 1. Connect to an AQUOS LINK-enabled device With a commercially available HDMI-certified cable, connect an AQUOS LINK-compatible device and the Monitor using a commercially available HDMI-certified cable. 2. Configuring the settings.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices AQUOS LINK and Other Devices Connecting Recorder, Player, etc. To connect through HDMI terminals Check the output terminals of your recorder or player, and connect to a terminal that is capable of high definition / high image quality.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names AQUOS LINK and Other Devices Connecting Recorder, Player, etc. To connect through video terminals 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting 8. Specifications, etc. You can select an OSD language from among 8 languages.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices AQUOS LINK and Other Devices Connecting Recorder, Player, etc. For a device with an HDMI output terminal HDMI terminals allow video and audio signals to be transmitted through an HDMI-certified cable (commercial product). Be sure to use a commercially available HDMI-certified product (Premium HDMI cable).
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting 8. Specifications, etc. You can select an OSD language from among 8 languages. AQUOS LINK and Other Devices Connecting Recorder, Player, etc.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation AQUOS LINK and Other Devices Connecting Recorder, Player, etc. For a device with a video output terminal (connection for playback) Do not turn on the Monitor and recoding device before completing connection between the Monitor and the recording device. 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting 8. Specifications, etc.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other AQUOS LINK and Other Devices Connecting Recorder, Player, etc. Switching to the screen of a BD recorder, etc. Switching to the screen of HDMI output allows you to watch BD or DVD video. The underlined step describes the operation of an external device such as BD recorder. 1. Connect a BD recorder to the Monitor, and press its power button to turn on the BD recorder 2.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) AQUOS LINK and Other Devices Connecting Recorder, Player, etc. Switching to the screen of a BD recorder, etc. The underlined step describes the operation of an external device such as BD recorder. 4.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor AQUOS LINK and Other Devices Connecting Recorder, Player, etc. Switching to the screen of a BD recorder, etc. To change displayed name of input source as desired The device names displayed in the input menu, etc. can be changed to the names of the devices connected to INPUT1 to 8. 1.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices AQUOS LINK and Other Devices Connecting Recorder, Player, etc. Switching to the screen of a BD recorder, etc. To skip unused inputs Unused inputs (INPUT1 to 4, INPUT6, INPUT7, INPUT8, USB Media) 1. Press MENU to display the Menu, followed by / / / to select "Setup", and then press ENTER 2. Press / / / to select "(Option)" - "Terminal setting" 3.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation AQUOS LINK and Other Devices Connecting Recorder, Player, etc. Switching to the screen of a BD recorder, etc. When connecting a video game console. You can connect and play video game console in all INPUT. In case you play video game in INPUT7, you can feel better response in PC mode. 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting 8.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media AQUOS LINK and Other Devices Connecting Recorder, Player or Game Player Switching to the screen of a BD recorder, video game console, etc. When connecting a video game console The game play time is displayed every half an hour (game time display setting).
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names AQUOS LINK and Other Devices Connecting Audio Device You can connect an audio device to the Monitor and enjoy impressive sound quality and volume. 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting 8. Specifications, etc. You can select an OSD language from among 8 languages.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media AQUOS LINK and Other Devices Connecting PC Using as a monitor for PC Before connecting a PC to the Monitor, check the output resolution of the PC. If the PC does not provide support for the following resolutions, the PC screen cannot be displayed on the Monitor. For the connection method, check pages 5-27 to 5-29.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other AQUOS LINK and Other Devices Connecting PC Using as a monitor for PC NOTE When a certain type of PC is connected to the Monitor, the PC screen may fail to display properly or completely even if the input signal is supported by the Monitor. "Out of range" message will be displayed if an unsupported signal is input.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media AQUOS LINK and Other Devices Connecting PC Using as a monitor for PC Selectable screen size for the Monitor (The selectable screen sizes may vary depending on the input signal from PC.) Input signal 5. AQUOS LINK and Other > Devices 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting 8. Specifications, etc.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting 8. Specifications, etc. AQUOS LINK and Other Devices Connecting PC Using as a monitor for PC Displaying the PC screen / selecting the screen size 1. Turn on PC 2.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names AQUOS LINK and Other Devices Connecting PC When the monitor is connected to a PC with DVI output terminal (digital connection) 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting 8. Specifications, etc. Français >> Be sure to use the supplied conversion cable.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names AQUOS LINK and Other Devices Connecting PC When the monitor is connected to a PC with HDMI output terminal (digital connection) 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting 8. Specifications, etc. You can select an OSD language from among 8 languages. English (UK) >> Be sure to use the supplied conversion cable.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names AQUOS LINK and Other Devices Connecting PC When the monitor is connected to a PC with analog RGB output terminal (digital connection) 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting 8. Specifications, etc. You can select an OSD language from among 8 languages.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names Operating the Monitor Using a PC (IP control) Connecting the Monitor and PC The Monitor is connected using a commercially available LAN cable. 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting 8. Specifications, etc. You can select an OSD language from among 8 languages. English (UK) >> How to communicate Send a control command from PC.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation Operating the Monitor Using a PC (IP control) Connecting the Monitor and PC Command and argument 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices 6.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting 8. Specifications, etc. You can select an OSD language from among 8 languages. English (UK) >> Operating the Monitor Using a PC (IP control) Settings to operate the Monitor How to communicate This is required to operate the Monitor remotely using a mobile device or PC.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names Operating the Monitor Using a PC (IP control) Command list Any commands not listed in the following table are out of operation guarantee range. 2. Basic Operation 3.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names Operating the Monitor Using a PC (IP control) Command list Function 2. Basic Operation Screen size “A”part WIDE 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting 8. Specifications, etc. You can select an OSD language from among 8 languages.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media Troubleshooting If You Suspect a Problem If you encounter a problem, verify the problem before asking for repair. Check the following; The power cannot be turned on Be sure to insert the power cord plug all the way in. (The operation manual supplied with the Monitor "Connecting AC Cord") 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting 8.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation Troubleshooting If You Suspect a Problem Check the following; The power cannot be turned on (Continue) If the lamp is not lit, press the power button on the Monitor to turn on the power. 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting 8. Specifications, etc. You can select an OSD language from among 8 languages.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation Troubleshooting If You Suspect a Problem General What if 3. Menu Operation 4. USB Media Devices 6. Operating the Monitor Using a PC (IP control) 8. Specifications, etc. You can select an OSD language from among 8 languages.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation Troubleshooting If You Suspect a Problem General What if Where to check Reference page Is there any object placed in front of the brightness sensor? 1-1 Change "Picture". 3-8 to 3-17 Adjust "Backlight". 3-9 Check "AV Mode". 3-8 Underexposure Adjust "Backlight", "Brightness", or "Advanced" - "Gamma adjustment".
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation Troubleshooting If You Suspect a Problem General What if 3. Menu Operation 4. USB Media You cannot operate the buttons on the remote control or Monitor 5. AQUOS LINK and Other Devices You hear a crack sometimes Where to check Reference page It may be attributable to external or interference noises.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting 8. Specifications, etc.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names Troubleshooting If You Suspect a Problem IP control-related 2. Basic Operation What if 3. Menu Operation No IP control 4. USB Media 5. AQUOS LINK and Other Devices Where to check Go to the setup menu, and then " Reference page (Initial Setup)" - "Network Setup" - "IP Control setup". Check if it is set to "Enable".
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names Troubleshooting If Error Message Appears Message concerning USB Media 2. Basic Operation On-screen error message example 3. Menu Operation The power supply requirement of the connected USB device is too large. After turning power off the Monitor, connect only necessary USB devices. 4. USB Media Solution USB inrush current has occurred.It can occur when multiple USB devices are connected to the Monitor.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names Troubleshooting If Error Message Appears Message concerning USB Media 2. Basic Operation On-screen error message example 3. Menu Operation Cannot play. Unable to play this file. 4. USB Media 5. AQUOS LINK and Other Devices Cannot play. Cannot playback the audio file. Solution Out-of-spec video data cannot be played back. Check if the video data format can be played back on the Monitor.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor Troubleshooting What If If the Monitor cannot be operated If the Monitor is exposed to intensive external noise (very large amount of static electricity, source voltage error caused by lighting strike, etc.), or if you operate the Monitor in an improper manner, an error may result, such as failure to operate or control the Monitor.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names Specifications, etc. Specifications Speaker Full range x 2 pcs, Middle range x 2 pcs, subwoofer x 2 pcs Annual power consumption On mode power: 260 W Annual power consumption: 361 kWh/year 70 W（10 W+10 W+10 W+10 W+15 W+15 W） Operating temperature 0 °C to 40 °C Power consumption 725 W (during standby: 0.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names Specifications, etc. PC Supported signal timing Horizontal frequency （kHz) Vertical frequency （Hz） Digital （HDMI） Analog （D-SUB） 31.5 60 o o 37.9 72 o o 37.5 75 o o 35.1 56 o o 37.9 60 o o 48.1 72 o o 46.9 75 o o 48.4 60 o o 56.5 70 o o 60.0 75 o o 1280 x 800 49.7 60 o o 1366 x 768 47.7 60 o o 1280 x 1024 64.0 60 o o 1400 x 1050 65.3 60 o o 720 x 400 31.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names Specifications, etc. AV Supported signal timing Resolution 2. Basic Operation Vertical frequency （Hz） Digital （HDMI) Analog （D-SUB） 24 o ― 29.98 o ― 30 o ― 50 o ― 59.94 o o 60 o o 59.94 o ― 50 o ― 60 o ― 29.98 o ― 30 o ― 50 o ― 59.94 o o 60 o o 59.94 o o Français >> 60 o o Deutsch >> 59.94 o ― 3. Menu Operation 4. USB Media 1920 x 1080p 5. AQUOS LINK and Other Devices 6.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names Specifications, etc. Dimensional Drawing 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting 8. Specifications, etc. You can select an OSD language from among 8 languages. English (UK) >> Français >> Deutsch >> Italiano >> Русский >> Español >> Polski >> English (US) >> Ver. 1.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names Specifications, etc. Setting the Monitor on the Wall For the screws, refer to the table shown below. 2. Basic Operation 3. Menu Operation 4. USB Media Unit: mm Standard screws M8 (Use 1.25 pitch screws.) Length(Depth of mounting holes) 12 Quantity 4 pcs. 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting NOTE To use this Monitor mounted on a wall, remove the cable tie as needed.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices 6. Operating the Monitor Using a PC (IP control) 7. Troubleshooting Specifications, etc. Software License Information on the open-source software license. Software composition The software included in this product is comprised of various software components whose individual copyrights are held by third parties.
1/24/2019 Contents Sharp operation manual ＞ ＜ 1. Part Names 2. Basic Operation 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices Specifications, etc. Software License Information on licenses of software used in the Monitor NOTE Select "Setup" - " (Information)" - "Software licence" on the MENU to display the information concerning the licenses of software used for the Monitor. and LC logo mark are registered trademarks of SHARP Corporation.
1/24/2019 Contents 1. Part Names 2. Basic Operation Sharp operation manual ＜ Specifications, etc. Software License Trademark, Registered Trademark, etc. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. 3. Menu Operation 4. USB Media 5. AQUOS LINK and Other Devices 6.
