ENGLISH FRANÇAIS OPERATION MANUAL MODE D'EMPLOI MANUAL DE OPERACIÓN OPERATION MANUAL ESPAÑOL LC-46SE94U LC-52SE94U LC-65SE94U LC-46SE94U LC-52SE94U LC-65SE94U LIQUID CRYSTAL TELEVISION TÉLÉVISEUR ACL TELEVISOR CON PANTALLA DE CRISTAL LÍQUIDO MODE D'EMPLOI SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07430-2135 LC-46SE94U/LC-52SE94U MANUAL DE OPERACIÓN SHARP CORPORATION LC-65SE94U Printed in Mexico Imprimé au Mexique Impreso en México TINS-D476WJZZ 1 08P01-MX-NM IMPORTANT : Plea
Dimensional Drawings Unit: inch (mm) LC-65SE94U 60 25/64 (1534) 2 21/64 (59) 313/16 (792) 5 63/64 (152) 3 61/64 (100) 25 19/32 (650) 12 13/16 (325) 17 21/64 (440) 22 9/32 (566) 313/4 (806.5) 40 3/32 (1018) 37 49/64 (959) 35 3/4 (908) 56 29/64 (1433.5) 16 7/64 (409) LC-46_52_65SE94U_E_Hyo_Se8mm.
ENGLISH LC-46SE94U LC-52SE94U LC-65SE94U LIQUID CRYSTAL TELEVISION ENGLISH OPERATION MANUAL • The illustrations and on-screen displays in this operation manual are for explanation purposes and may vary slightly from the actual operations. • Menu items that are not selectable are grayed out. • The examples used throughout this manual are based on the LC-52SE94U model. IMPORTANT: To aid reporting in case of loss or theft, please record the TV's model and serial numbers in the space provided.
IMPORTANT INFORMATION CAUTION: DO NOT PLACE THIS PRODUCT ON AN UNSTABLE CART, STAND, TRIPOD, BRACKET, OR TABLE. THE PRODUCT MAY FALL CAUSING SERIOUS PERSONAL INJURY AND SERIOUS DAMAGE TO THE PRODUCT. USE ONLY WITH A CART, STAND, TRIPOD, BRACKET, OR TABLE RECOMMENDED BY THE MANUFACTURER OR SOLD WITH THE PRODUCT. FOLLOW THE MANUFACTURER'S INSTRUCTIONS WHEN INSTALLING THE PRODUCT AND USE MOUNTING ACCESSORIES RECOMMENDED BY THE MANUFACTURER. A PRODUCT AND CART COMBINATION SHOULD BE MOVED WITH CARE.
DEAR SHARP CUSTOMER Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Instructions carefully before using this product. IMPORTANT SAFETY INSTRUCTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety.
IMPORTANT SAFETY INSTRUCTIONS • Outdoor Antenna Grounding — If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges.
Supplied Accessories Make sure the following accessories are provided with the product. LC-46SE94U/ LC-52SE94U LC-46SE94U/ LC-52SE94U LC-65SE94U Remote control unit (g1) Page 8 H AC cord (g1) Page 7 Operation manual (g1) H Cable clamp (g1) Cable tie (g1) Page 7 Stand hole cover (g2) Page 45 Speaker unit (g1) Pages 5 and 6 Stand unit (g1) Page 6 “AAA” size battery (g2) Page 8 • Always use the AC cord supplied with the TV. • AC cord enclosed in this product is for 110-125V.
QUICK REFERENCE ■ LC-46SE94U/LC-52SE94U • Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged. 1 Confirm that there are 4 screws and a screwdriver supplied with the speaker unit. 2 Insert the projections on the speaker unit into the corresponding slots on the TV, then fasten the screws. 3 Connect the ends of the cables to the speaker terminals as shown below. Connect the leads to the speaker terminals of the same color.
QUICK REFERENCE STOP! To safely remove the AQUOS television from the box • It's best to use 2 people to remove the AQUOS television for stability. • Lift onto installation location as the diagram illustrates. Ventilation & Cleaning Tips Keep your AQUOS television in a well ventilated area and make sure not to place it by a heat source or use it near water. The AQUOS television is designed for AC use only and should be used with the supplied AC cord.
QUICK REFERENCE If the remote control fails to operate TV functions, replace the batteries in the remote control unit. 1 Open the battery cover. 2 Insert two “AAA” size batteries (supplied with the product). 3 Close the battery cover. • Place the batteries with their terminals corresponding to the (e) and (f) indications in the battery compartment. CAUTION Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
Contents IMPORTANT INFORMATION ................................. 1 Trademarks ............................................................. 2 DEAR SHARP CUSTOMER .................................... 3 IMPORTANT SAFETY INSTRUCTIONS ................. 3 Supplied Accessories............................................. 5 QUICK REFERENCE ............................................... 5 Attaching the Speaker Unit ..................................5 Attaching the Stand ............................................
Part Names TV (Front) Remote control sensor OPC sensor (See page 22.) OPC indicator (See page 22.) SLEEP indicator (See page 16.) POWER indicator (See page 15.
Part Names Remote Control Unit 1 2 3 17 18 4 19 1 TV POWER: Switch the TV power on or enters standby. (See page 15.) 2 DISPLAY: Display the channel information. 3 SOURCE POWER: Turns the power of the external equipment on and off. 4 External equipment operational buttons: Operate the external equipment. 5 0–9: Set the channel. (See page 16.) 6 • (DOT): (See pages 16 and 33.) 7 NET: Switches the display to the Sidebar Widget, TVkWeb, Web or TV screen. (See pages 38 to 44 for details.
Preparation Using the Remote Control Unit Use the remote control unit by pointing it towards the remote control sensor on the TV. Objects between the remote control unit and the remote control sensor may prevent proper operation. Cautions Regarding the Remote Control Unit • Do not expose the remote control unit to shock. In addition, do not expose the remote control unit to liquids, and do not place in an area with high humidity. • Do not install or place the remote control unit in direct sunlight.
Preparation You can connect many types of external equipment to your TV like a Blu-ray disc player, HD-DVD player, DVD player, VCR, Digital TV tuner, HDMI equipment, game console or camcorder. To view external source images, select the input source from INPUT on the remote control unit or on the TV. (See page 16.) CAUTION • To protect equipment, always turn off the TV before connecting any external equipment. • Please read the relevant operation manual (Blu-ray disc player, etc.
Preparation Using Digital Audio Output It is possible to output audio through the DIGITAL AUDIO OUTPUT terminal. (See page 31 for details.) PCM audio outputs from the terminal. To optical digital input of external audio devices Optical fiber cable (commercially available) • Depending on the connected equipment, audio will not output from the DIGITAL AUDIO OUTPUT terminal in HDMI connection. In this case, set the audio formats of the connected equipment to PCM, 32/44.1/48 kHz and 16 bits.
Watching TV Turning On/Off the Power Press POWER on the TV, or TV POWER on the remote control unit to turn the power on. • POWER indicator (Blue): The TV is on. (After a few seconds, a window appears with sound.) POWER • The initial setup starts when the TV powers on for the first time. If the TV has been turned on before, the EZ Setup will not be invoked. See page 24 for performing EZ Setup from the Setup menu. Press POWER on the TV, or TV POWER on the remote control unit again to turn the power off.
Direct Button Operation Sleep Timer Allows you to set a time when the TV automatically switches to standby. Press SLEEP. • The remaining time displays when the sleep timer has been set. • Each time you press SLEEP, the remaining time switches as shown below. Off 30 60 90 120 • When set, the time automatically starts counting down. • If you want to adjust the sleep timer, you can press SLEEP twice then change the time setting. • Five minutes before the time expires, the remaining time displays every minute.
Direct Button Operation AV MODE AUDIO AV MODE gives you 8 viewing options to choose from to best match the surrounding environment of the TV, which can vary due to factors like room brightness, type of program watched or the type of image input from external equipment. Press AV MODE. Current AV MODE displays. • Press AV MODE again before the mode displayed on the screen disappears.
Direct Button Operation Closed Captions and Digital Closed Captions Your TV is equipped with an internal Closed Caption decoder. It allows you to view conversations, narration and sound effects as subtitles on your TV. Closed Captions are available on some TV programs and on some VHS home video tapes at the discretion of the program provider. Digital Closed Caption service is a new caption service available only on digital TV programs (also at the discretion of the service provider).
Direct Button Operation VIEW MODE You can select the screen size. 1 Press VIEW MODE. • The View Mode menu displays. • The menu lists the View Mode options selectable for the type of video signal currently being received. 2 Press VIEW MODE or a/b while the View Mode menu is displayed to select a desired item on the menu. • You can sequentially select a View Mode that has its own aspect ratio.
On-Screen Display Menu Menu Items For TV/INPUT 1/2/3 Mode For HDMI/PC-IN Mode For HTML Mode Picture Menu OPC ..................................................Page 22 Backlight...........................................Page 22 Contrast ...........................................Page 22 Brightness .......................................Page 22 Color ................................................Page 22 Tint ...................................................Page 22 Sharpness ............................
On-Screen Display Menu On-Screen Display Menu Operation Example Example Picture Option AQUOS LINK Setup OPC Backlight Contrast Off On On : Display [b12] a16 [b30] Brightness [ 0 0] a30 Audio Only b16 Input Select b40 Output select [Fixed] b30 Color System [Auto] [VIDEO] Color [ 0] a30 b30 Caption Setup Tint [ 0] a30 b30 Digital Caption Info.
On-Screen Display Menu Picture Menu Adjusts the picture to your preference with the following picture settings. Example Picture OPC Off On On : Display Backlight [b12] a16 b16 Contrast [b30] 0 b40 Brightness [ 0] a30 b30 Color [ 0] a30 b30 Tint [ 0] a30 b30 Sharpness [ b2] a10 b10 Advanced • When set to "On", the OPC senses the surrounding light and automatically adjusts the backlight brightness.
On-Screen Display Menu I/P Setting Converts input signals depending on the type of images. Fast: Suitable for fast-moving images Slow: Suitable for smooth images with low amounts of flickers Audio Menu You can adjust the sound quality to your preference with the following settings. Example Audio • "I/P Setting" is not selectable when channel display shows an input resolution of 480P, 720P, or 1080P.
On-Screen Display Menu Power Control Menu Setup Menu Power control setting allows you to save energy. Example Example Setup Power Control EZ Setup No Signal Off [Disable] No Operation Off [Disable] CH Setup Antenna Setup-DIGITAL Input Skip Parental CTRL Position Language 1 Press MENU to display the MENU screen, and then 2 3 4 [English] Reset press c/d to select "Power Control". Press a/b to select a "No Signal Off" or "No Operation Off", and then press ENTER.
On-Screen Display Menu CH Setup If initial setup does not memorize all the channels in your region, follow the instructions below to manually memorize the channels. Air/Cable: Make sure what kind of connection is made with your TV when selecting "Air" or "Cable". CH Search: Channel auto search makes the TV look for all channels viewable in the set area. CH Memory: You can select the channels to skip in each ANALOG (Air), ANALOG (Cable), DIGITAL (Air) and DIGITAL (Cable). On: Skips channels.
On-Screen Display Menu Position For adjusting a picture's horizontal and vertical position. H-Pos.: Centers the image by moving it to the left or right. V-Pos.: Centers the image by moving it up or down. • For resetting adjustments to the factory preset values, press a/b to select "Reset", and then press ENTER. • When connecting a PC to the HDMI terminal, the image position will be automatically adjusted. It cannot be manually adjusted.
On-Screen Display Menu ■ MPAA (Voluntary movie rating system) Example MPAA TV Guidelines G Can. English Ratings PG Can. French Ratings PG-13 R NC-17 X NONE G: General audiences. All ages admitted. PG: Parental guidance suggested. Some material may not be suitable for children. PG-13: Parents strongly cautioned. Some material may be inappropriate for children under 13. R: Restricted. Under 17 requires accompanying parent or adult guardian (age varies in some jurisdictions).
On-Screen Display Menu Canadian Rating Systems (Canadian English ratings and Canadian French ratings) • The TV rating systems in Canada are based on the Canadian Radio-Television and Telecommunications Commission (CRTC) policy on violence in television programming. • While violence is the most important content element to be rated, the structure developed takes into consideration other program content like language, nudity, sexuality and mature themes.
On-Screen Display Menu Input Select Option Menu If the image does not come in clearly from the external equipment connected to INPUT 1 or 3, you may need to change the input signal type setting from the list below: Example Option Auto/COMPONENT/VIDEO AQUOS LINK Setup Audio Only Output Select [Fixed] Caption Setup Digital Caption Info.
On-Screen Display Menu Caption Setup This function allows you to adjust the closed caption screen appearance to suit your preference. You can adjust 7 items: "Caption Size", "Font Style", "Foreground Color", "Foreground Opacity", "Background Color", "Background Opacity" and "Character Edge". Example: Selectable items available for "Font Style". Default: The font specified by broadcasting station or default font. Type 0: Proportional font used in the MENU screen. Type 1: Monospaced with serifs.
On-Screen Display Menu Digital Setup Menu Software Update This setting allows you to optimize the settings of Digital broadcasting. Example Digital Setup Audio Setup This function allows software updates by inserting a USB memory device with the update file into the SERVICE terminal on the TV. To check for the availability of a software update, visit www.sharpusa.com. If you have any questions, please call 1-800-BE-SHARP (800-237-4277).
On-Screen Display Menu 5 Press ENTER to start checking the data in the USB memory device. Insert the USB memory device containing the software update file. 7 Press ENTER to start updating. • The screen becomes dark for a while until the update screen can be displayed. Please wait for the update screen to appear. Do not unplug the AC cord. The picture will temporarily go dark until the Software Update display appears. Wait several minutes and do not unplug the AC cord.
Other Viewing Options Presetting Remote Control Function You can operate the connected AV products (AV receiver, cable box, SAT tuner, DTV, VCR, DVD, LD) using the presetting manufacturer function of your remote control unit. Operating the Connected Equipment To operate the connected equipment, press FUNCTION to select the LED for your device. (VCR, AUDIO, CBL/SAT (cable converter) or DVD.) The LED lights up, and the remote control unit button will function as follows.
Other Viewing Options Manufacturer codes VCR BRAND REMOTE CONTROL CODE NUMBER DVD/BD/LD BRAND REMOTE CONTROL CODE NUMBER CATV/SAT BRAND REMOTE CONTROL CODE NUMBER • Numbers marked with * are SAT codes, all others are CATV codes. AUDIO BRAND REMOTE CONTROL CODE NUMBER 34 LC-46_52_65SE94U_E.
Using AQUOS LINK Controlling HDMI Equipment Using AQUOS LINK What’s AQUOS LINK? • Using the HDMI CEC (Consumer Electronics Control) protocol, with AQUOS LINK you can interactively operate compatible system equipment (Blue-ray Disc equipment, AV amplifier, DVD). • By connecting AQUOS LINK-compatible devices with HDMI-certified cables to the TV, you can control a recorder or AV amplifier using the remote control of the TV.
Using AQUOS LINK AQUOS LINK Setup One Touch Recording This function allows easy one-touch recording of the program being viewed on the TV to AQUOS LINKcompatible equipment with a recording function by simply pressing REC on the remote control. 1 Press MENU to display the MENU screen, and then press c/d to select "Option". 2 Press a/b to select “AQUOS LINK Setup”, and then press ENTER. 3 Press a/b to select a specific item, and then press ENTER.
Using AQUOS LINK AQUOS LINK Menu AQUOS LINK Selecting Media Type for CEC-Compatible Recorder Recorder EPG You can switch the media (HDD or DVD) for playback or recording on the AQUOS LINK-compatible recorder. Top menu/title list 1 Press OPTION to display the AQUOS LINK MENU Media change By AQUOS AUDIO SP By AQUOS SP Sound mode change Model select 2 screen. Press a/b to select “Media change”, and then press ENTER. 3 Select the desired media such as DVD or HDD.
Using the Internet • By connecting your TV to a broadband system, you can access the Internet from the TV. • Display the “Sidebar Widget” on the TV screen to check out the latest Internet information and access a range of useful information for AQUOS users from the original home page*. * About the original home page • The original home page is a website set up specifically for AQUOS owners.
Using the Internet H If you cannot connect to the Internet Perform the procedures below to check your TV's network settings. Displaying the Sidebar Widget Perform the steps below to display the Sidebar Widget on the TV screen and view the latest Internet information. Ethernet Setup 1 Press EXIT to display the normal TV screen. 2 Press MENU to display the MENU screen, and then 1 press c/d to select “Digital Setup”.
Using the Internet Entering Text (Software Keyboard) When you are editing an input screen or specifying the Ethernet settings used for accessing the Internet, enter text from the software keyboard. Caps Off/Caps On/Caps Lock If “alphabet” is selected in “Character Set”, this switches characters between uppercase and lowercase.
Using the Internet Using the Browser ENTER, a/b/c/d • Press a/b/c/d to select a link that you want to jump, and then press ENTER. EXIT About links • Web pages on the Internet often include “links” that allow you to jump to other web pages (or sites). • “Links” can take various forms, including words or images, but they always work in the same way letting you jump to the link destination when you select them. • Selected items (such as links of text input fields) are enclosed in a yellow frame.
Using the Internet Using Tabs Using the Toolbar You can use the toolbar to control the browser and to specify settings. You can use tabs to view up to 3 web pages at the same time. Each page appears in a separate tab, and you can switch between the tabs. 1 Press B on the remote control unit to display the Tab menu. • You can also display the Tab menu by clicking “ the toolbar. Selected item ” in Description Select This Displays the web page in the selected tab.
Using the Internet Saving the URL of the Current Page Adding a web page to your bookmarks allows you to return to that page later by simply selecting it from your list of bookmarks. Editing Bookmarks You can rearrange or delete the bookmarks. ■ Switching between the URL and title name 1 Press D on the remote control unit to display the toolbar. 2 Press c/d to select “ ” in the toolbar, and then press ENTER. • Your bookmarks list is displayed.
Using the Internet Browser Settings You can check or modify your browser settings from the Browser menu. The Browser menu includes a display settings menu and a security settings menu. 1 Press D to display the toolbar. 2 Press c/d to select “ ” in the toolbar, and then press ENTER. 3 Press c/d to select the settings menu you want to access. 4 Press a/b to select and confirm the item you want to set. 5 Press a/b/c/d to specify the required setting, and then press ENTER. 6 Press D to exit.
Appendix Removing the Stand • Before detaching (or attaching) the stand, unplug the AC cord from the AC INPUT terminal. CAUTION • Do not remove the stand from the TV unless using an optional wall mount bracket to mount it. ■ LC-46SE94U/LC-52SE94U Before attaching/detaching the stand • Before performing work, make sure to turn off the TV. • Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
Appendix Setting the TV on the Wall CAUTION • This TV should be mounted on the wall only with the wall mount bracket AN-52AG4 (SHARP) (for LC-46SE94U/ LC-52SE94U) or AN-65AG1 (SHARP) (for LC-65SE94U). The use of other wall mount brackets may result in an unstable installation and may cause serious injuries. • Installing the TV requires special skill that should only be performed by qualified service personnel. Customers should not attempt to do the work themselves.
Appendix Troubleshooting Problem Possible Solution • No power • Check if you pressed TV POWER on the remote control unit. (See page 15.) If the indicator on the TV does not light up, press POWER on the TV. • Is the AC cord disconnected? (See page 7.) • Has the power been turned on? (See page 15.) • Unit cannot be operated. • External influences such as lightning, static electricity, may cause improper operation.
Appendix RS-232C Port Specifications ■ PC control of the TV • Attach an RS-232C cable cross-type (commercially available) to the supplied Din/D-Sub RS-232C for the connections. ■ Command format Eight ASCII codes e CR C1 C2 C3 C4 P1 P2 P3 Command 4-digits • This operation system should be used by a person who is accustomed to using computers. ■ Communication conditions Set the RS-232C communication settings on the PC to match the TV's communication conditions.
Appendix Specifications Item LCD panel Model: LC-46SE94U Model: LC-52SE94U Model: LC-65SE94U 46o screen size class Advanced Super View & BLACK TFT LCD (Diagonal Measurement: 45 63/64o ) 52o screen size class Advanced Super View & BLACK TFT LCD (Diagonal Measurement: 52 1/32o ) 65o screen size class Advanced Super View & BLACK TFT LCD (Diagonal Measurement: 64 33/64o ) 2,073,600 pixels (1,920 g 1,080) Resolution TV-standard (CCIR) TV Function Receiving Channel American TV Standard ATSC/NTSC Syst
CLEARING THE SECRET NUMBER If you forget the secret number, clear the secret number using the following procedure. 1 Press MENU to display the MENU screen, and then press c/d to select “Setup”. 2 Press a/b to select “EZ Setup”, “CH Setup”, “Parental CTRL”, “Reset”, “Color System” or “Software Update”, and the Secret number input screen displays. 3 Press and hold both CHr and VOLk on the TV simultaneously until the message appears on the screen. The secret number is .
Appendix Information on the Software License for This Product ■ Software composition The software included in this product is comprised of various software components whose individual copyrights are held by SHARP or by third parties.
Calling for Service For location of the nearest Sharp Authorized Service, or to obtain product literature, accessories, supplies, or customer assistance, please call 1-800-BE-SHARP.
53 LC-46_52_65SE94U_E.
NOTE LC-46_52_65SE94U_E.
Dimensional Drawings Unit: inch (mm) LC-46SE94U 17 3/8 (441) 22 43/64 (575.6) 26 17/64 (667) 28 5/16 (719) 40 19/64 (1023.4) 2 3/32 (53) 30 25/64 (772) 43 43/64 (1109) 18 25/32 (477) 5 3/64 (128) 3 1/2 (89) 3 4 15 / (400) 6 57/64 (175) 15 3/4 (400) 13 1/2 (343) LC-52SE94U 48 29/32 (1242) 29 / (743) 18 25/32 (477) 5 3/64 (128) 3 1/2 (89) 3 4 15 / (400) 5 25/64 (137) 15 3/4 (400) 18 7/8 (479) 25 21/32 (651.
Dimensional Drawings Unit: inch (mm) LC-65SE94U 60 25/64 (1534) 2 21/64 (59) 313/16 (792) 5 63/64 (152) 3 61/64 (100) 25 19/32 (650) 12 13/16 (325) 17 21/64 (440) 22 9/32 (566) 313/4 (806.5) 40 3/32 (1018) 37 49/64 (959) 35 3/4 (908) 56 29/64 (1433.5) 16 7/64 (409) LC-46_52_65SE94U_E_Hyo_Se8mm.
ENGLISH FRANÇAIS OPERATION MANUAL MODE D'EMPLOI MANUAL DE OPERACIÓN OPERATION MANUAL ESPAÑOL LC-46SE94U LC-52SE94U LC-65SE94U LC-46SE94U LC-52SE94U LC-65SE94U LIQUID CRYSTAL TELEVISION TÉLÉVISEUR ACL TELEVISOR CON PANTALLA DE CRISTAL LÍQUIDO MODE D'EMPLOI SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07430-2135 LC-46SE94U/LC-52SE94U MANUAL DE OPERACIÓN SHARP CORPORATION LC-65SE94U Printed in Mexico Imprimé au Mexique Impreso en México TINS-D476WJZZ 1 08P01-MX-NM IMPORTANT : Plea
