SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07430-2135 SHARP CORPORATION OPERATION MANUAL MODE D’EMPLOI MANUAL DE OPERACIÓN MANUAL DE OPERAÇÃO Printed on post-consumer recycled paper. Imprimé sur du papier recyclé. Impreso en papel reciclado. Impresso em papel reciclado pós utilização.
ENGLISH LC-22SV2U LIQUID CRYSTAL TELEVISION ENGLISH OPERATION MANUAL IMPORTANT: To aid reporting in case of loss or theft, please record the TV’s model and serial numbers in the space provided. The numbers are located at the rear of the TV. Model No.: Serial No.: U.S.A. ONLY IMPORTANT INFORMATION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN.
IMPORTANT INFORMATION (Continued) WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate this equipment. U.S.A. ONLY CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
DEAR SHARP CUSTOMER Thank you for your purchase of the Sharp LCD Color TV product. To ensure safety and many years of trouble-free operation of your product, please read the Safety Precautions carefully before using this product. IMPORTANT SAFETY PRECAUTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety.
IMPORTANT SAFETY PRECAUTIONS (Continued) ■ Cleaning—Unplug the power cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners. ■ Water and moisture—Do not use the product near water, such as bathtub, washbasin, kitchen sink and laundry tub, swimming pool and in a wet basement. ■ Stand—Do not place the product on an unstable cart, stand, tripod or table.
IMPORTANT SAFETY PRECAUTIONS (Continued) ■ If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges.
CONTENTS Page IMPORTANT INFORMATION ....................................................................................................... 1, 2 DEAR SHARP CUSTOMER ............................................................................................................. 3 IMPORTANT SAFETY PRECAUTIONS ....................................................................................... 3-5 CONTENTS .........................................................................................................
SUPPLIED ACCESSORIES Make sure the following accessories are provided with the product.
PREPARATION Using the Remote Control ■ Use the remote control by pointing it towards the remote control sensor window on the main unit. Objects between the remote control and sensor window may prevent proper operation. POWER OPC SLEEP SLEEP indicator OPC indicator POWER indicator OPC sensor Remote control sensor Cautions regarding use of the remote control ■ Do not expose the remote control to shock. In addition, do not expose the remote control to liquid, and do not place in an area with high humidity.
PREPARATION (Continued) Antenna Connection ANTENNAS • The antenna requirements for good color television reception are more important than those for black & white television reception. For this reason, a good quality outdoor antenna is strongly recommended. The following is a brief explanation of the type of connections that are provided with the various antenna systems. F-type connector 1.
PREPARATION (Continued) Antenna Connection (Continued) CABLE TV (CATV) CONNECTION • A 75-ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75ohm coaxial cable to the set, screw the 75-ohm cable to the ANT. terminal. • Some cable TV companies offer “premium pay channels”. Since the signals of these premium pay channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber by the cable TV company.
DISPLAY AND CONTROL OVERVIEW Controls Upper control panel VOL (–)/(+) CH ( )/( ) MENU TV/VIDEO MAIN POWER VOL CH MENU TV/VIDEO MAIN POWER Speaker Speaker To change the vertical angle of the LCD TV set, tilt the screen up to 5 degrees forward or 10 degrees backward. The TV set can also be rotated 25 degrees horizontally. Adjust the angle so that the TV set can be watched most comfortably. SLEEP indicator The SLEEP indicator lights up red when the SLEEP TIMER is set.
DISPLAY AND CONTROL OVERVIEW (Continued) ● Adjusting the screen view angle Terminals VIDEO UT AV-IN2/O L AUDIO R ONENT Y COMP PB PR L AUDIO R HEAD PHONE VIDEO AUDIO AUDIO Y PB PR AUDIO AUDIO (L) (R) AV-IN2/OUT Hold the carrying handle and tilt the screen while steadying the stand with your other hand. You can adjust the screen vertically up to 5 degrees forward or 10 degrees backward, or rotate 25 degrees horizontally.
DISPLAY AND CONTROL OVERVIEW (Continued) Removing the Back Cover ■ Before connecting cables and cords into the rear terminals, remove the back covers. Push in the tabs and pull out the back covers carefully. VIDEO 1 AV-IN L AUDIO R EO S-VID ■ To mount the cover, insert the 2 hooks on the bottom of the cover into the cabinet and press on the upper part of the back cover until the tab locks in place with a click. VIDEO 2/OUT AV-IN L AUDIO R NENT COMPO Y ANT.
EZ SETUP EZ SETUP during the First Power On ■ When you turn on the TV for the first time, it will automatically memorize the broadcasting channels. Please perform the following instructions before you press MAIN POWER. (1) Insert the batteries into the remote control. (See page 8.) (2) Connect the antenna cable to the TV set. (See page 9.) (3) Connect the AC adapter to the POWER INPUT terminal of the product and plug in the AC cord to the wall outlet. (See page 10.
REMOTE CONTROL POWER (p. 17) POWER PIC. FLIP (p. 24) VIEW MODE VIEW MODE (p. 20) SLEEP PIC. FLIP SLEEP (p. 22) MENU BRIGHT (p. 23) MUTE BRIGHT DISPLAY TV/VIDEO MENU/ a/b/c/d (Cursor control) (p. 19) DISPLAY*1 TV/VIDEO (p. 16) MUTE (p. 17) FLASHBACK VOL(+)/(–) (p. 17) CH ( VOL CH FLASHBACK*2 )/( ) (p. 18) Channel Select (p. 18) MTS*3 (p. 17) *1 Displays the receiving channel for 10 seconds. *2 Returns to the previous channel. *3 Selects audio settings.
BASIC OPERATION (Continued) Turning on POWER Control section of main unit 1 MAIN POWER VOL CH MENU TV/VIDEO 2 MAIN POWER Press MAIN POWER, located on the upper side of the main unit, to on. ▼ On-screen display 2 The POWER indicator instantaneously changes from red to green and the main unit is turned on. A • The On-screen indicator disappears after a few seconds. STEREO SAP MONO Notes: POWER indicator Switching TV/VIDEO [AV1/AV2/COMPONENT/TV] Modes POWER VIEW MODE SLEEP PIC.
BASIC OPERATION (Continued) Sound Volume POWER 1 Press VOL (+) to increase the sound volume. The bar indicator shifts right. POWER VOLUME 50 VIEW MODE SLEEP 2 PIC. FLIP MENU MUTE BRIGHT DISPLAY TV/VIDEO VOLUME 10 MUTE FLASHBACK VOL Press VOL (–) to decrease the sound volume. The bar indicator shifts left. CH To mute the sound VOL (+)/(–) 1 Press MUTE to temporarily turn off the sound. is displayed for The MUTE mark 4 seconds.
BASIC OPERATION (Continued) Changing Channels Changing channels by using Channel Select on the remote control • This LCD TV set allows you to select up to 125 channels (1 to 125). To select a channel, enter a 2or 3-digit number. To select a 1- or 2-digit channel number (e.g., Channel 5): Complete the following procedure within 4 seconds. POWER VIEW MODE SLEEP PIC. FLIP MENU MUTE BRIGHT DISPLAY TV/VIDEO CH ( )/( ) 1 2 Press the Press the 0– 5 button. 5 button.
SELECTING MENU ITEMS Selecting Menu Items • This LCD TV set allows you to adjust the various settings using the menu screen. Select the desired menu item by following the steps below and then refer to the indicated page for details. Press MENU to display the MENU screen. 2 Press a/b to select the desired menu item. 3 4 Press c/d to enter. POWER VIEW MODE SLEEP PIC.
ADJUSTMENTS Adjusting VIEW MODE Settings You can directly change the size of the picture by pressing VIEW MODE on the remote control. VIEW MODE 1 Press VIEW MODE to display the VIEW MODE screen. 2 Press VIEW MODE to change the setting. Change the setting as shown below. POWER VIEW MODE SLEEP S I DE BAR PIC. FLIP MENU MUTE BRIGHT DISPLAY TV/VIDEO FLASHBACK VOL SIDE BAR SMART STRETCH ZOOM STRETCH CH SMART STRETCH A • The VIEW MODE screen automatically disappears in 3 seconds.
ADJUSTMENTS (Continued) Moving the Picture on the Screen You can move the picture upwards or downwards on the screen. Press a/b to move an image on the screen to the desired position. Press c/d to return to the initial image position. POWER VIEW MODE SLEEP PIC. FLIP MENU MUTE BRIGHT DISPLAY TV/VIDEO FLASHBACK VOL CH a/b/c/d A • This setting cannot be stored. Once the LCD TV shuts down or enters standby mode, the setting is erased.
ADJUSTMENTS (Continued) Adjusting SLEEP TIMER Settings You can set the SLEEP TIMER to automatically turn off the TV. Directly setting the SLEEP TIMER 1 Press SLEEP to display the SLEEP TIMER screen. 2 Press SLEEP to set the sleep timer (in minutes). POWER VIEW MODE SLEEP PIC. FLIP MENU MUTE BRIGHT DISPLAY TV/VIDEO SLEEP --- FLASHBACK VOL 30 60 CH 120 ––– REMA I N 90 (minutes) The SLEEP TIMER is turned off when --- is displayed.
ADJUSTMENTS (Continued) Adjusting BRIGHTNESS Settings You can set the brightness of the screen. Directly setting the BRIGHTNESS 1 Press BRIGHT to display the BRIGHTNESS screen. 2 Press BRIGHT to change the setting. POWER VIEW MODE SLEEP PIC. FLIP MENU MUTE BRIGHT AUTO BRIGHT DISPLAY TV/VIDEO NORMAL DARK BR I GHTNESS [ BR I GHT ] FLASHBACK VOL CH BRIGHT A • The BRIGHTNESS screen automatically disappears in 3 seconds.
ADJUSTMENTS (Continued) Adjusting PICTURE FLIP Settings You can set the orientation of the picture. Directly setting the PICTURE FLIP 1 Press PIC. FLIP to display the PICTURE FLIP screen. 2 Press PIC. FLIP to change the setting. POWER VIEW MODE SLEEP PIC. FLIP PIC. FLIP P I C. F L I P [NORMAL ] MENU NORMAL MUTE ABC BRIGHT DISPLAY TV/VIDEO MIRROR ROTATE UPSIDE DOWN FLASHBACK VOL CH A • The PICTURE FLIP screen automatically disappears in 3 seconds.
ADJUSTMENTS (Continued) Adjusting LANGUAGE Settings The language for the On-Screen Display can be ENGLISH, SPANISH or FRENCH. 1 Press MENU to display the MENU screen. POWER VIEW MODE SLEEP MENU SLEEP T IMER V I DEO ADJUST PRESET CLOSED CAPT I ON V–CH I P BLOCK SET UP PIC. FLIP MENU MUTE FLASHBACK VOL SELECT BRIGHT DISPLAY TV/VIDEO CH MENU/ a/b/c/d 2 Press a/b to move the cursor to SET UP. 3 Press c/d to enter. Press a/b to move the cursor to LANGUAGE. 5 Press c/d to enter.
ADJUSTMENTS (Continued) Adjusting VIDEO ADJUST Settings Video adjustments have different selection items depending on TV mode or AV mode (signal from an external device). (See page 27.) 1 Press MENU to display the MENU screen. POWER MENU SLEEP T IMER V I DEO ADJUST PRESET CLOSED CAPT I ON V–CH I P BLOCK SET UP VIEW MODE SLEEP PIC. FLIP MENU MUTE SELECT BRIGHT DISPLAY TV/VIDEO FLASHBACK VOL CH MENU/ a/b/c/d 2 Press a/b to move the cursor to VIDEO ADJUST. 3 Press c/d to enter.
ADJUSTMENTS (Continued) Adjusting VIDEO ADJUST Settings (Continued) TV mode Selected item Press c Press d PICTURE Decrease contrast Increase contrast TINT Toward purple Toward green COLOR Lower color intensity Higher color intensity BLACK LEVEL Less brightness More brightness SHARPNESS Soft picture Sharp picture Selected item Press c Press d PICTURE Decrease contrast Increase contrast TINT Toward purple Toward green COLOR Lower color intensity Higher color intensity BLACK LEVEL
ADJUSTMENTS (Continued) Adjusting PRESET Settings 1 Press MENU to display the MENU screen. POWER MENU SLEEP T IMER V I DEO ADJUST PRESET CLOSED CAPT I ON V–CH I P BLOCK SET UP VIEW MODE SLEEP PIC. FLIP MENU MUTE SELECT BRIGHT DISPLAY TV/VIDEO FLASHBACK VOL CH MENU/ a/b/c/d 2 Press a/b to move the cursor to PRESET. 3 Press c/d to enter. Press a/b to move the cursor to the desired item. 5 Press c/d to change the setting. 6 Press MENU to return to the main screen.
ADJUSTMENTS (Continued) SET UP ■ CHANNEL SETTING It is necessary to set the receiving mode to AIR or CABLE channels to receive locally broadcast TV programs. POWER VIEW MODE SLEEP PIC. FLIP 1 Press MENU to display the MENU screen. 2 Press a/b to move the cursor to SET UP. 3 Press c/d to enter.
ADJUSTMENTS (Continued) SET UP (Continued) ■ Saving broadcast TV channels in the memory 1 Press MENU to display the MENU screen, press a/b to move the cursor to SET UP, and press c/d to enter. 2 Press a/b to move the cursor to CH-SETTING, and press c/d to enter. 3 Press a/b to move the cursor to CH SEARCH, and press c/d to enter. 4 Press d. The tuner will search through all available channels in your area and add them to the TV memory. POWER VIEW MODE SLEEP PIC.
ADJUSTMENTS (Continued) Adjusting BLUE SCREEN Settings ■ BLUE SCREEN Automatically turns the screen blue if no broadcast signal is received. POWER VIEW MODE SLEEP 1 Press MENU to display the MENU screen. 2 Press a/b to move the cursor to SET UP. 3 Press c/d to enter. MENU SLEEP T IMER V I DEO ADJUST PRESET CLOSED CAPT I ON V–CH I P BLOCK SET UP PIC. FLIP SELECT MENU MUTE BRIGHT DISPLAY TV/VIDEO FLASHBACK VOL CH MENU/ a/b/c/d 4 Press a/b to move the cursor to BLUE SCREEN.
ADJUSTMENTS (Continued) Adjusting CLOSED CAPTION Settings ■ SETTING CLOSED CAPTION • This TV set is equipped with an internal Closed Caption decoder. “Closed Caption” is a system which allows conversations, narration, and sound effects in TV programs and home videos to be viewed as captions on the TV screen (see the illustration). • Not all programs and videos will offer closed captioning. Please look for the “ ” symbol to ensure that captions will be shown.
ADJUSTMENTS (Continued) Adjusting V-CHIP Settings ■ V-CHIP • This function allows TV programs to be restricted and TV usage to be controlled based on FCC data. It prevents children from watching violent or sexual scenes that may be harmful. • Restriction of TV programs includes two ratings that contain information about the program: the MPAA rating and the TV Parental Guidelines. The MPAA rating is restricted by age. TV Parental Guidelines are restricted by age and content.
ADJUSTMENTS (Continued) Adjusting V-CHIP Settings (Continued) [2] TV PARENTAL GUIDELINES ⇐ ⇒ V (Violence) S (Sexual Situation) L (Adult Language) D (Sexually Suggestive Dialog) xxx ✕ ✕ ✕ ✕ TV-14 (Parents Strongly Cautioned) X ✕ ✕ ✕ ✕ TV-MA (Mature Audience Only) X ✕ ✕ ✕ RATING FV (Fantasy Violence) content based TV-Y (All children) ⇑ TV-Y7 (Directed to Older Children) TV-G (General Audience) age based TV-PG (Parental Guidance Suggested) ⇓ ✕ X : The content rating can be set,
ADJUSTMENTS (Continued) Adjusting V-CHIP Settings (Continued) ■ SETTING V-CHIP [1] MPAA RATING 1 Press MENU to display the MENU screen. MENU SLEEP T IMER V I DEO ADJUST PRESET CLOSED CAPT I ON V–CH I P BLOCK SET UP 2 Press a/b to move the cursor to V-CHIP BLOCK, and press c/d to enter. MENU SLEEP T IMER V I DEO ADJUST PRESET CLOSED CAPT I ON V–CH I P BLOCK SET UP 3 INPUT SECRET NO. will display. Input a 4-digit secret number by using Channel Select. POWER VIEW MODE SLEEP PIC.
ADJUSTMENTS (Continued) Parent Control Continued) Adjusting V-CHIP(V-CHIP SettingsOperation (Continued) [2] TV GUIDELINES ● Setting TV GUIDELINES 1 Repeat steps 1 to 3 of [1] MPAA RATING. (See page 35.) 2 Press a/b to move the cursor to TV GUIDELINES. V–CH I P BLOCK RETURN MPAA TV GU I DEL I NES 3 Press c/d to enter. STATUS [ OFF ] POWER VIEW MODE SLEEP PIC.
ADJUSTMENTS (Continued) Adjusting V-CHIP Settings (Continued) [3] ACTIVATING V-CHIP BLOCK ● Setting STATUS You can activate V-CHIP BLOCK after setting [1] MPAA RATING and/ or [2] TV GUIDELINES. 1 Repeat steps 1 to 3 of [1] MPAA RATING. 2 Press a/b to move the cursor to STATUS. 3 Press c/d to set STATUS to ON. POWER V–CH I P BLOCK RETURN MPAA TV GU I DEL I NES VIEW MODE SLEEP STATUS [ ON ] PIC.
ADJUSTMENTS (Continued) Adjusting V-CHIP Settings (Continued) [5] CHANGING V-CHIP BLOCK SETTINGS 1 POWER Repeat steps 1 to 2 of [1] MPAA RATING, then INPUT SECRET NO. will be displayed. I NPUT SECRET NO . VIEW MODE SLEEP PIC. FLIP – – – – MENU MUTE BRIGHT DISPLAY TV/VIDEO EX I T MENU FLASHBACK VOL CH 2 Channel Select Input the 4-digit secret number by using Channel Select; the VCHIP select mode will be displayed. Set V-CHIP BLOCK again. I NPUT SECRET NO .
CONNECTING EXTERNAL DEVICES You can enjoy picture and sound by connecting a VCR or a home video game system to the terminals located on the rear of the TV set. When connecting an external device, turn off the power of the main unit first to prevent any possible damage.
CONNECTING EXTERNAL DEVICES (Continued) Connecting a VCR, DVD player or a video camera (AV-IN1/2/COMPONENT) To AV-IN2 terminal VIDEO UT AV-IN2/O L Video AUDIO R Audio (L) ONENT COMP Y Audio (R) PB PR L To audio/video output terminal AUDIO R HEAD PHONE VCR To COMPONENT input (Video) terminal Y PB VIDEO 1 AV-IN L PR Audio (L) Audio (R) AUDIO R S-VID EO VIDEO 2/OUT AV-IN L ANT.
CONNECTING EXTERNAL DEVICES (Continued) Outputting video and audio (video output) You can output video and audio signals from the TV set through the AV output terminals (AV-OUT). • When using AV2 as an output terminal, select PRESET in the MENU and set AV2 IN/OUT to OUT. (See page 28.) • The factory setting for AV2 IN/OUT is IN. VIDEO /OUT AV-IN2 L AUDIO R T PONEN COM Y VIDEO 1 AV-IN L AUDIO R EO S-VID VIDEO 2/OUT AV-IN L ANT.
TROUBLESHOOTING ■ Before calling for repair services, make the following checks for possible remedies to the encountered symptoms. TV set Problem Sound Picture Picture There is no picture or sound. There is no picture. There is no picture from AV-IN1. There is no sound. There is no picture or sound, just noise. Check item • Make sure the AC adapter is properly inserted in the power outlet. • Reception other than those of broadcasting stations can be considered.
TROUBLESHOOTING (Continued) Antenna Problem The picture is not sharp. Check item • • • • The reception may be weak. The quality of the broadcast may also be bad. Make sure the antenna is facing the right direction. Make sure the outside antenna is connected. The picture moves. The picture is doubled or tripled. The picture is spotted. There are stripes on the screen or colors fade. • Make sure the antenna is facing the right direction.
SPECIFICATIONS Items LCD panel Number of dots Video color systems Destination TV Standard (CCIR) TV function TV Tuning System STEREO CATV 3 Dimensional Y/C separation circuit Digital comb filter Brightness Lamp life Viewing angles Audio amplifier Speakers AV-IN1 AV-IN2 Terminals COMPONENT Antenna Headphone OSD language Power supply Power consumption Weight Accessories Model LC-22SV2U 22” Advanced Super View & BLACK TFT LCD 1,229,760 dots WVGA N358, N443, PAL, PAL-M, PAL-N, SECAM, PAL-60 USA/Latin America/
DIMENSIONAL DRAWINGS 2 11/32 (59.5) 2 55/64 (72.5) Unit: inch/(mm) CH MENU TV/VIDEO 1617/32 (420) 7 7/64 (180.6) 29 3/32 (739) 3 47/64 (95) 183/16 (462) 147/16 (367) 109/16 (268.32) 19 5/16 (490.62) 41/4 (108) AUDIO OUT L AV-IN 1 RGB 123/32 (43.9) 3 15/16 (100) 3 15/16 (100) AV-IN 2 S-VIDEO VIDEO R L AUDIO R POWER INPUT DC13V 1 7/32 (31) 6 33/64 (165.
CALLING FOR SERVICE For location of the nearest Sharp Authorized Service, or to obtain product literature, accessories, supplies, or customer assistance, please call 1-800-BE-SHARP.
VALID IN CANADA ONLY LIMITED WARRANTY Consumer Electronics Products Congratulations on your purchase! Sharp Electronics of Canada Ltd. (hereinafter called “Sharp”) gives the following express warranty to the first consumer purchaser for this Sharp brand product, when shipped in its original container and sold or distributed in Canada by Sharp or by an Authorized Sharp Dealer: Sharp warrants that this product is free, under normal use and maintenance, from any defects in material and workmanship.
SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07430-2135 SHARP CORPORATION OPERATION MANUAL MODE D’EMPLOI MANUAL DE OPERACIÓN MANUAL DE OPERAÇÃO Printed on post-consumer recycled paper. Imprimé sur du papier recyclé. Impreso en papel reciclado. Impresso em papel reciclado pós utilização.