Owner's Manual

THANK YOU!
We hope you enjoy your new OttLite product.
PRODUCT REGISTRATION FORM
Please complete the enclosed Product Registration Form and
return it today by mail.
NOTE: THIS UNIT IS FULLY ASSEMBLED
1. Remove product from packing, placing base (A) flat on a
steady surface.
2. Connect power adapter input (B) into connector (C) in the
back of the product.
3. Plug the power adapter (D) into a standard household
120V AC outlet. NOTE: Only use with the supplied
power adapter to avoid damage or fire.
4. Wireless charger is located in the center of base (E).
See Wireless Charging Instructions section for details.
TO SET THE TIME:
• Press and hold “Set” (H) until the year starts to flash.
Then press “UP/ALARM” (F) or “DOWN” (G) to change
the year.
• Press “Set” (H) again and the month will start to flash.
Press “UP/ALARM” (F) or “DOWN” (G) to change the
month.
• Press “Set” (H) again and the day will start to flash.
Press “UP/ALARM” (F) or “DOWN” (G) to change the
day.
• Press “Set” (H) again and the hour will start to flash.
Press “UP/ALARM” (F) or “DOWN” (G) to change the
hour.
• Press “Set” (H) again and the minutes will start to flash.
Press “UP/ALARM” (F) or “DOWN” (G) to change the
minutes.
• Press “SET” (H) again to return to normal time
keeping.
ALARM:
• Press and hold “UP/ALARM” (F) until the alarm time
starts to flash.
• Press “UP/ALARM” (F) or “DOWN” (G) to change the
alarm time. A clock indicator will appear showing the
alarm is on.
• Press “SET” (H) again to return to normal
time keeping.
• To stop the alarm sounding, press the “DOWN”
(G) button.
TO TURN OFF THE ALARM FUNCTION:
• Double press the “UP/ALARM” (F) quickly to turn the
alarm function on or off. Note: The alarm is off when
the year is visible.
SNOOZE:
• When the alarm is sounding, press “SNOOZE” (I) and
the alarm will snooze for five minutes before sounding
again. This can be done multiple times.
TO CHANGE THE BRIGHTNESS:
• Press the “SNOOZE” (I) button to change to the desired
brightness. There are three levels.
WIRELESS CHARGING INSTRUCTIONS:
Wireless charging requires devices that have integrated
wireless charging capabilities. To determine if your device
has wireless charging, refer to the owners manual that
came with your device.
To wirelessly charge a device, perform the following:
• Place the device, which supports wireless charging,
face up on the middle of the wireless charging area (E).
• When the device is centered on the wireless charging
area (E), your device should show charging is
taking place.
• Check the charge level on your device periodically to
determine when device is fully charged. NOTE: Product
DOES NOT provide any indication of when device is fully
charged.
Organizer with Clock and Wireless Charging
A03G5T
F G H I
PL-0313
INS-21-0638 REV033021
5V.DC MAX 2.1A
5V.DC MAX 2.1A