Safety Instructions

CONGRATULATIONS!
You’ve purchased the finest in natural lighting technology with your new product.
PRODUCT REGISTRATION FORM
Please complete the enclosed Product Registration Form and return it today by mail, or register online by going
to:OttLite.com/warranty
1. Remove lamp from packaging placing lamp base (A) flat on a steady surface.
2. Connect the AC Adapter input (C) into the connector (H) in the rear-bottom of the lamp.
3. Plug the A/C adapter (B) into a standard household 120V AC outlet. Note: Only use with the supplied AC adapter to
avoid damage or fire.
4. Turn the lamp ON & OFF using power switch (D) located in the front-upper side of base (A). Power switch (D) is a “touch”
switch that controls the dimmer function for
3 levels of brightness.
5. To power LED settings, slightly touch the switch to achieve the following:
• turn lamp “ON” to first lower-brightness; touch the switch “once”;
• for medium-brightness; touch the switch “twice”;
• or high-brightness; touch the switch “three-times”;
• to turn lamp “OFF”; touch the switch “four-times”.
6. Wireless Charger (E) for Qi certified devices is on a separate stand next to the mirror. See Wireless Charging Instruction
section for details.
7. To position the mirror simply rotate to desired position needed. Note: The mirror is double sided with a standard mirror
on one side and a magnification mirror on the other.
WIRELESS CHARGING INSTRUCTIONS:
Wireless charging requires the use of a Qi-Certified device. To determine if your device is Qi-Certified, please visit the
Wireless Power Consortium website.
To wireless charge a device, perform the following:
• Place the device, which supports the Qi wireless charging standard, in the horizontal position on the charging stand.
• When the phone is centered on the Qi wireless charging emblem the blue indicator (F) will come on indicating charging.
NOTE: If the BLUE light is
blinking this indicates the device is not charging and needs to be properly centered.
• Monitor the battery status of your device to determine when charging is complete.
CAUTION! DEVICE MAY BECOME WARM DURING CHARGING. THIS
IS NORMAL AND PART OF THE PROCESS. CHARGING TIMES VARY BY DEVICE.
SAFETY WARNING: TO REDUCE THE RISK OF FIRE,
ELECTRIC SHOCK, OR INJURY TO PERSONS
1. Never use with an extension cord unless the plug can be fully inserted into the receptacles in the extension cord.
2. Do not alter the plug.
3. The mirror head included with this unit cannot be replaced by the consumer.
4. INDOOR USE ONLY
NOTE: The important safety instructions appearing in this instruction sheet are not
meant to cover all possible conditions and situations that may occur. It must be
understood that common sense, caution, and care must be used with any electrical
product.