Contents 1. Appearance………………………………………………………………………2 2. Getting started……………………………………………………………………2 3. Inputting…………………………………………………………………………8 4. Desktop …………………………………………………………………………9 5. Browsing web pages……………………………………………………………15 6. Typical applications……………………………………………………………15 7. Tips and other information……………………………………………………24 8. Customized settings……………………………………………………………29 9. Using HDMI……………………………………………………………………40 10. Locking the device……………………………………………………………41 11.
Appearance 1. 1.Appearance Production structure: 2. Getting started Note: Our Company spares no efforts to improve the product quality. Therefore, if there is any difference between the delivered product and the contents of the User’s Guide because of the upgrading of the software, the former shall prevail. Thank you for your understanding in this respect! 2.
power is low. Power adapter: To charge the battery, insert one end adapter into the outlet and the other end into the power jack on the device. 1. After the adapter is inserted, the battery indicator will turn red, which means the charging is in process. When the battery is fully charged, the indicator will turn green. At the time, you should unplug the adapter, while the indicator still remains green. 2. You can also use the handheld PC when the battery in it is being charged.
First close all files already opened from the card. Then click the menu, and select Setup →SD card’s memory→SD card 1→Uninstall SD card. At the time, the system indicates that “the SD card has been safely removed”. After that, press the card gently to allow it to project one part of it, and hold that part to pull out the whole card. Then the screen will indicate that “SD card was removed.” Note: 1. Insert the SD card properly. Otherwise, it may damage the card. 2.
internal memory of the device won’t be displayed. The folders of SD card are displayed as “SD card 1” and “SD card 2”. The folders of external flash disk are displayed as “Flash Disk 1” and “Flash Disk 2”. The system memory can only be used for storing the system files, with a capacity of 2GB. The capacity of the SD card and the external flash disk is subject to the device itself. The system can support an SD card of 32GB at maximum. For details of the memory, please refer to the part “8.
screen-locking interface. To save energy, if the electricity is insufficient in the sleeping mode, the system can power off itself after it is automatically powered on. 2.6 Vibration Power-on vibration: Click the setup icon the shortcut bar, and select settings for the voice and display mode. Then select the check box behind the “tactile feedback” and the vibration function is enabled.
External flash disk: Insert the flash disk into the USB port. Once it is properly connected, you can save and copy contents between the device and the PC. 2.9 Network connection Cable network: After you insert the network cable into the port designed for Ethernet on the PC, the icon “ETH” will appear on status bar at the top of the screen. Then the device will obtain the IP address automatically to access to the network. Network access can also be realized through manual setups.
. If AP is not encrypted, you can select “connect” in the popped-up window to start connecting; 9. If AP is encrypted, you should enter the password in the popped-up window and then click “connect” to start connecting; 10. If the connection is successful, an icon indicating the successful connection will appear on the transfer bar at the top of the desktop. 3. Inputting 3.1 Keyboard When you need to input the programs or files made up of texts and digits, the touch keyboard will appear on the screen.
pages, or move the application icons to the shortcut bar You can also use a pen rather than you finger to operate the touch screen. 3.3 Mouse The device is compatible with external mouse. After a mouse is connected, you can use the mouse for such operations as clicking, selecting, dragging, sliding or for right clicking to pop up the menu. 4. Desktop 4.1 Status bar At the upmost part of the screen is the status bar, at the left of which is one software button and right are five.
To enter the interface of application icons, click the button shortcut bar, as shown below: 10 at the
To enter the interface of Gadget Mode, click . 4.3 Shortcut mode In the major interface of the Gadget Mode, you can press the menu button or click the icon Menu at the status bar.
4.4 Shortcut way to add gadgets 1. Shortcut mode To add a shortcut mode of an application to the desktop, press Menu→Add→Shortcut in the Gadget mode interface. Once added, you can click the shortcut icon to perform the related operations.
2. Widgets To add the widgets to the major screen, press Menu→Add→Widgets in the gadget mode interface. And then select the widget you want to add. Once added, you can click the shortcut icon to perform the related operations.
4.5 Using gadgets The user can add, delete and install the gadgets, add and delete application icons, and move the icons. You can also drag the icons between the operation areas or between operation area and shortcut bar. In the desktop gadget interface, long press the gadget icon, and a small square graphic and a recycling bin icon at the middle of the shortcut bar will be popped up. Drag the recycling bin icon to any place on the desktop, or drag it to the recycling bin to delete it.
5. Browsing web pages The user can access to the Internet through the browser. Click the browser icon on the desktop, and you can access to the web pages. The popped-up interface is shown below: 6. Typical applications 6.1 Email Click the email icon , you can enter the email interface, where you can perform the operations below: 1.
2. Write new emails; 3. Send and receive the emails; 4. Download or print the attachments. Tip: To pop up the shortcut menu, press the menu button. 6.
perform such operations as move, copy, rename and delete, as shown below: Installing files If you want to install the files in the explorer, you only need to click the installation files with an extension name “APK”. At the time, a prompt window will be popped up, and then you can select Install to install the fife into the device. 6.3 Photo Frame Click the icon to enter the interface for picture browsing.
play the pictures in a slide mode. After you click the button Menu, the shortcut menu of the electronic photo frame will be popped up, with which you can perform the operations below: 1. Random playing; 2. Sharing the pictures being played; 3. Setting time intervals for playing; 4. Setting the fold for playing; 5. Selection setup items. 6.
1. Click the menu button to pop up the shortcut menu, where such items as All Pictures, Multi-Option and Camera Settings are available.
2. Click All Pictures, and system will enter the slide playing mode. 3.
4. Click the thumbnail at the picture library interface, and you can view the picture in full screen. Click the screen, and the zoom-in and zoom-out items will be popped up, where you can perform the related operations. Press the menu button, and the system will pop up the shortcut menu, where you can realize such operations as sharing picture, deleting picture and cropping, setting as wallpaper and clicking icon of contact people.
the option interface, as shown below: 6.5 Music Click the icon to enter the music mode. After you click the menu, the menu shown below will be popped up. You can select Play All, Party Shuffle or Shuffle All.
To enter the playing interface, click the song. 1. Click to enter the play list; 2. Click to enter the mode of Party Shuffle; 3. Click to switch over between Play All mode and Play Single mode; 4.
add the current track to the play list or jump to the music library. 6.6 Camera Click to enter the mode for shooting pictures. To operate the device in this application: 1. Click the icon at the lower right angle to shoot the picture. You can save the picture to DCIM/CAMERA under SD root directory. 2. Move the slide block on the icon at the right, and you can change the shoot mode to video mode. 3.
7.2 Setting for shortcut operations 7.2.1 Access to Internet in a wireless way Click to enter the interface for wireless access to Internet, as shown below: 7.2.2 Access to Internet Click the internet access icon to access to the Internet.
7.2.
After you enter the user name and password, you can click “connect” to access to the Internet. 7.2.4 Access to the Internet in 3G mode First of all you should buy a 3G wireless internet access card from China Telecom, China Mobile or China Unicom. At present, the network adapter which supports 3G internet access is branded as “Wangxun I916.
with more models. At any rate, the delivered product shall prevail. To access to the Internet in 3G mode, you must buy card with models mentioned above. To do that, you can place the card you bought into the 3G network adapter, and insert the adapter into the USB port of the device. At the time, the indicator for 3G Internet access will be illuminated. This means you can access to the Internet now, so please just click . Select the check box behind the 3G network item.
appearing in the screen, which means you can surfer on the Internet now. 7.3 About the battery The large-size LCD screen of the device will consume quite a lot electric power. To extend the working time of the battery, you may reduce the use of some functions. 1. Watch movies, listen to music or shoot pictures; 2. Brightness: Press Menu→Setup→Voice/Display(display setting)→Brightness (lower down the brightness); 3.
setting. For details, please refer to the section “7.2.1 Access to Internet in a wireless way. Settings for 3G network If you want to set and manage connection point designed for 3G network, please press Menu→System Settings→Wireless Network→3G network setting. For 7.2.4 Access to the Internet in 3G mode. details, please refer to the section “7.2.4 mode.” 8.2 Access to the Internet Access to broadband network and Ethernet 7.2.2 Access to Internet For details, please refer to the section “7.2.
Mute mode To set the system to a mute, except for medium and alarm clock, you can press Menu→System Settings→Voice and Display (voice setting)→Mute. Medium volume To set the volume for the music and video, you can press Menu→System Settings→Voice and Display (voice setting)→Medium Volume.
Settings→Voice and Display (voice setting)→Notification Ringing. Selecting the operation ringing If you desire that there is a sound when a selection is made through the screen, you can press Menu→System Settings→Voice and Display (voice setting)→Tactile Feedback. If you want to use the soft key and use some UI interacted vibrations, you can press Menu→System Settings→Voice and Display (voice setting)→Tactile Feedback.
Display (voice setting)→Brightness. Standby mode To adjust the delayed time for screen locking, press Menu→System Settings→Voice and Display (voice setting)→Standby Mode. 8.4 Position and safety Settings for GPS system and personal safety.
Menu→System Settings→Positin and Safety→Using GPS. Password To display the characters of the password when it is entered, press Menu→System Settings→Positin and Safety→Password Display. Saving credentials To use and install safety credential, press Menu→System Settings→Positin and Safety, and then perform the related operations under the root directory of the credential. For example, you can set the password for the safety credential. 8.
8.6 SD card and system memory View the remaining memory space. Memory devices (SD card and flash disk) To view or perform operations for the memory devices, such as uninstalling, press Menu→System Settings→SD card and system memory. Then select a memory device under the related root directory, like SD card 1. After you enter the interface of the memory device, you can view the total capacity and the remaining capacity, or you can uninstall it. The interface is shown below.
System memory To view the system memory, press Menu→System Settings→SD Card and System Memory. Under its root directory, you can view the system memory. 8.7 OSD Language and keyboard In this item, you can set the OSD language and region 、 character entering and automatic correction.
Select OSD language and region To select the OSD language and region, press Menu→System Settings→OSD language and keyboard→Select OSD language. Android keyboard To set Android keyboard, press Menu→System Settings→OSD language and keyboard→Android keyboard.
Menu→System Settings→OSD language and keyboard→User-defined dictionary. 8.8 Date and time To set the date, time, time zone, time system and format, you can press Menu→System Settings→Date and time. 8.9 Screen calibration To calibrate the screen, press Menu→System Settings→Screen calibration. Then calibrate the touch screen by following the prompts. After that, the system will prompt you to return to the settings list.
8.10 About the device In this item, you can view the information on law, device status and software version. Status To view the status of the battery, power-on time and WIFI address, press Menu→System Settings→About the device→Status.
device→Information on law. Model To view the mode, press Menu→System Settings→About the device→Model. Firmware version To view the firmware version, press Menu→System Settings→About the device→Firmware version. Version No. To view the version No., press Menu→System Settings→About the device→Version No. 9. Using HDMI With HDMI, video contents being played by the flat handheld PC can be transferred to HDMI monitor (like a TV set with HDMI port) for playing.
may wait with patience. 5. You can transfer the contents to the PC again by any of the four ways below: 1) System transfers to PC automatically after the playing is completed. 2) Press Menu during playing to switch the video contents to the PC. 3) Pull out the HDMI cable during playing, after which the video contents will be transferred to the PC. 4) Press Back to exit the playing mode, after which the video contents will be transferred to the PC. 10.
enter the interface of system settings, where you can select Application→Running Services, as shown below: Click the application to be closed, and the system will pop up a window which asks you whether you need to stop the service window, as shown below: 42
Click Stop, and the application will be closed and disappear within the window being used. 11.2 Compulsory power-off 1. Press the power switch and hold down for 7 seconds, the device will be powered off in a compulsory way. 2. Press Rest at the right lower part of the device, the device will be powered off in a compulsory way.
11.3 Restore defaults If you want to restore the factory defaults and delete all other data, please press Menu→System Settings→Privacy→Defaults Warning: Once you select Reset, the Google account, data and settings of the system and application and the downloaded applications will be deleted. Thus, be careful when using this function.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized changes and modifications to this equipment. Such changes and modifications could void the user’s authority to operate the equipment.