+ @ BELL Phones BY NORTHWESTERN BELL Excursion®39205 Pr Congratulations on your selection of the Excursion® 39205 from Northwestern Bela Phones. This quality 900MHz cordless telephone, like all Genuine BELL® products, has been designed to give you many years of continuous service and represents the best value for your money.
| | + IMPORTANT SERVICE INFORMATION Read this manual before attempting to setup or use this instrument. it contains important information regarding safe installation and use. Keep this manual for future reference. Also save the carton, packing and proof of purchase to simplify and accelerate any needed action. If you need assistance or service, call (800) 888-8960 between 8:00 a.m. and 4:30 p.m. Pacific Standard Time, Monday through Friday. You can also visit our web site at. HTTP: Awww.nwbphones.
CARTON CONTENTS fi ee, a Mey HANDSET BASE UNIT RECHARGEABLE Ni-Cd BATTERY PACK TN, AC ADAPTER TELEPHONE WALL MOUNT BELT CLIP (9VDC,300MA) LINE CORD BRACKET {Short & Long) ¥ Offal.
| % SAVE THESE INSTRUCTIONS A IMPORTANT SAFETY INSTRUCTIONS When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: : Read and understand all instructions, Follow all warnings and instructions marked on the product. Unplug this product from the wall outlet before cleaning. Bo not use liquid cleaners or aerosol cleaners, Use a damp cloth for cleaning.
i © technician to restore the product to primal operation. E. If the product has been dropped or the cabinet has been damaged. FH the product exhibits & distinctive change in performance. 43. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. 14. Do not use tha telephone to report a gas leak in the vicinity of the leak. A Simon: To reduce the risk of fire or injury to persons, read and follow these instructions: 1.
SAVE THESE INSTRUCTIONS A INSTALLATION PRECAUTIONS 1. Never install telephone wiring during a fighting storm. 2. Ever install telephone jacks in wet locations unless the jack is specifically designed for wet locations. 3. Never touch insulated telephone wires or terminals unless the telephone line has been disconnected at the network interface. A, Use caution when installing or modifying telephone lines.
. This equipment may not be used on coin service provided by the telephone company. Connection to party fine service is subject to state tariffs. (Contact your state public utility commission or corporation commission for information). WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to pore equipment.
EXCURSION 39205 CONTROLS DIAGRAM HHA RETAINER al TAZ RETAINER LOT RBG BNFOFF_sorsmemrincm «= RECENTER EE TE HOUSEBOAT LED LOW LED INDICATOR TALK BUTTON | MEMO BUTTON | | Reputation | | Gio On of 008 oo! Tomes TELLING TOHBPULSE(TIP) AGH ITCH DE ARBITER ARH
| $ DESCRIPTION : CONTROLS LOCATION AND FUNCTION HANDSET CONTROLS 1. Antenna 2. IN BATHHOUSE LOW LED Indicator: Flashes when an incoming call is received and during paging condition. During TALK mode, this LED indicator remains lit steadily. The BAT LOW LED blinks when the handset battery power is low. 3, TALK Button: Press to answer an incoming call or to place a call. Press to end a call, 4. TONE Used to temporarily change the dialing mods from pulse to tone for rotary service user.
BLEEP 0 BLED, Button: Allows you to change channels if the current channel is noisy or heaving interference from other sources. 8. Charge Contacts: Used for charging the handset battery. 9. Microphone: Used for speaking with callers. 10. MUTE Button : Press to temporarily disable the handset microphone. 11. MEMO (Memory) Button: Used to store up to 10 telephone numbers into memory and you can then dial any of the stored phone numbers.
USE LED Indicator: Lights up steadily when the phone is being used. Flashes when paging the handset : 8, ANTENNA Raise for batter reception MOUNTING TIO DESKTOP USE: Connect the telephone ling cord te the TEL 2 LINE jack on the rear of the base unit and connect the opposite end to the telephone modular jack. (Figure 3) WALL USE: A. WITH A STANDARD AT&T OR GTE MODULAR WALL JACK 1. Install the wall mount bracket at the position as shown in Figure 4. 2.
rN & BELT CLIP INSTRUCTION ' Clamp the belt clip of the back of the handset on shown in Figure 7 i (Figure 7} CONNECTING T HEADSET For hands free conversation, a headset (not included) is connected to the headset jack as shown in Figure 8. The handset receiver and microphone are disabled when the headset is connected” Headset Jack Headset Plug ~. Rummy i {Figure 8} Press the TALK button to answer or place a call using the headset. Refer tithe manufacturer headset manual for more details.
AC Plug #7 Came Adapter . {Figure 9) BATTERY INSTALLATION [ Handset) A CAUTION: Use only the Nickel Cadmium H-Cd) battery type included with this unit. Use of = other battery type may cause injuries or damage. 1. Remove the battery compartment cover of the handset. Handset Batters insert the End Carpentry : of the Rafter > / Pack Wire 2. Connect the rechargeable Ni-Cd battery as shown on Figure 10. 3, insert the Ni-Cd battery into the battery compartment of the handset. 4.
INITIAL SETUP , Before you can use your cordless telephone, the handset must be charged for at least 12 hours. See charging instruction on MAXIMIZING BATTERY LIFE section of this manual. TONE | PULSE SETTING Select the appropriate dialing service by moving the TONE / PULSE switch on the side of the base unit eo TONE for Tone e PULSE SETTING THE HANDSET RINGER ON / OFF 1. Set the ringer switch of the handset to OFF position. The ringer is deactivated.
“SYMPTOMS POSSIBLE SOLUTION / CAUSE No dial tone «Check for the telephone line cord connectors at both ends that they are pushed in firmly until they click. of you had a power failure or had unplugged the base unit, replace the handset on the base unit for two to five seconds to reset the system. Does not ring « Check the RING ON / OFF switch on the handset. Switch 10 the RING ON position to enable the handset ringer telephone fine cord connectors at both ends. pushed in firmly until they click.
uses radio frequencies to allow mobility. There are certain using radio frequencies with a cordless telephone. while these are following could affect the operation of your system. dielectric pulse noise is present in most homes atone time or another. This noise is most intense during electrical storms. Certain kinds of electric equipment such as light dimmers, fluorescent bulbs, motors, and fans also ise pulses. Because radio frequencies are susceptible to these noise u.
COMMANDER NOISE REDUCTION Reduces background noise. FLASH If you subscribe to phone company special services like Call Waiting or Call Forwarding, pressing the FLASH button wilt momentarily hang up the phone to access these services. . HEARING AID COMPATIBLE Allows hearing aid devices to function properly while using the handset.