ZEMSO-ODF550-AT Server Software User Manual Version：5.5 Date Updated：2015.4.
Contents 1 Server Software Installation .................................................................................................................................. - 3 2 Software Introductions ......................................................................................................................................... - 6 2.1 Homepage .................................................................................................................................................. - 7 2.
.2 Software ................................................................................................................................................... - 26 3.3 Firmware .................................................................................................................................................. - 27 3.4 Weather ................................................................................................................................................... - 27 3.5 Junk File ..
1 Server Software Installation Note One: Please uninstall old version iDS6 software in advance. If user installs Tomcat and MySql and other software, please uninstall that software to avoid failed installation. It is recommended that close related anti-virus program Note Two: If iDS6 Software has been installed, please click Start->All Program->IDSV6->Uninstall iDS6 Software Running Environment can support Windows XP, Windows 7, Windows Server 2003, Windows Server 2008 and etc.
Pic 1.2 Pic 1.3 Then wait for several minutes, installation is finished. Pic 1.
Open Start->All Program->IDSV6->Setup iDS6 , make sure the services are working. Pic 1.5 Or open the Task Manager->service, you can see three DSM service. Then, Please click short cut on desktop “Login iDS6” to check Server Software is running well or not as bellow: Pic 1.6 If service cannot run well, please contact with our IT engineers.
2 Software Introductions Login Page: iDS6 Software is web-based. Not only user can click “Login iDS6” on desktop, also open iDS6 software by inputting IP address through browser. Q: If I install software into A computer, can I manage it though B computer? A: No problem at all. Just need input IP address of A computer in B computer. Default Login Info: Username: admin Password: admin Corp ID: demoiDS6 Software Interface as bellow: Pic 2.
2.1 Homepage Pic 2.2 Zone 1: Server Software Info Server IP: For it is local machine, so IP address shows 127.0.0.1. If user uses another computer to visit iDS6 software, then IP address is of server software. Website Port: Default HTTP Port is 80. User can change it through “Setup iDS6”. Note: If Website Port is changed from 80 into 8080, then server software address is IP address: 8080. Control Port: Get communication between Server and Player. Corp ID: Administrative domain after login iDS6 Software.
2.2 Resources Zone 1 Zone 3 Zone 2 Zone 4 Zone 5 Pic 2.3 Zone 1: Resources mainly includes File, RSS and Template. File includes Video, Image and etc. Hereby, some RSS materials are offered and user can also create own RSS resources. Template is for saving playlist templates which already have done. We also offer some templates for your reference. Method of RSS and Template is almost similar.
Upload :upload resources from local computer. Note: Click “Upload “and appear Flash Upload Interface (there is installation suggestion if native machine does not install Flash programs). Or drag one file or multiple ones to upload. User also can click “Browser”to search files in computer. “Download” is used for saving uniformed files into assigned root directory to back up or check. Click “ Direct Preview “ in file list or Thumbnails to preview files. Pic 2.
Notice: In Zone 5, please choose “Auto Audit”. If user does not choose it, resources need to be audited after uploading. Zone 5: File list can be flexibly checked according to every page 10 /20/50. Or directly jump into certain page according to specific page number. Also user can click shortcut to enter into Home, Page-end, Last, Next and etc. Please take notice on “Auto Audit” and user need check it out. 2.3 Composer Pic 2.6 Zone 1: Composer included Loop, Demand and Insert.
for player. It needs to be triggered by remote control, inductor or network command. Insert Composer: According to Start Time/End Time & Display Times/Display Method, it finishes emergent news delivery. 2.3.1 Loop Composer New: Click “New” to set one new composer and name it. Pic 2.7 Clone: Click “Clone “to back up another copy. User can modify it for one certain composer. Edit: Modify name of Composer. Delete: Delete composer that selected.
Pic 2.8 Like above image shows, user can add kinds of programs into layout. Each zone is adjusted by mouse cursers. Or directly input specific numbers in X and Y to adjust location coordinate. “Hybrid”: User can add kinds of resources into Hybrid Area. For example, user adds videos and images into Hybrid Area and then after player finishes displaying video and images are displayed. “Device”: Device area can display playlists of USB flash driver. Click Advance and user can check it as bellow pic2.9: Pic 2.
in advance. Playback order is same as marshalling sequence of images. So user needs edit images properties and obtains desired playback effect. “Advance”: Hereby, user can modify Color, Font, and Background of Text File. Pic 2.10 “Right Click “in layout, user can set ratio and use back ground image to intuitively design layout. After finish Layout and then click “Save ”, go to “ Content “ and add resources into related areas. Pic 2.11 Hereby, click “Edit” and user can edit related resources.
Pic 2.12 Notice: Playback time is set as 0 which means fully display for one time. 2.3.2 Demand Composer Demand composer is triggered through pressing numbers on remote control; touch screen, mouse or network command. Click “Demand “ and then click “New“ to set up new demand composer. Main difference between Loop Composer and Demand Composer is that user need set playback method (times/playback time). If user sets Demand Composer according to times, then player displays it for assigned times.
Pic 2.13 2.3.3 Insert Composer Insert Composer owns highest priority. When it arrives certain time point, player cuts other composer and display Insert composer. Click “Insert “and then choose “New “to set up one new Insert Composer. Main difference between Insert Composer and Demand Composer is that user need set Start & End time and Insert Mode & Insert Times. Player begins to display Insert Composer in certain assigned start time and ends in stop time. Insert Mode includes “Always “and “Interval”.
2.4 Player Player can be grouped. User can set “New”, “Edit” and “Delete”. Click “New” to set up new group and also go on clicking “New “to set sub group. “Edit “can modify name and location of group. Player’s ID ,unique Download progress Player’s location Display the players did not been registered You can choose auto registered in the dsm8 setting Choose the player and grant task Pic 2.15 2.4.
2.4.2 Register by Hand Choose one group and click “New “to register one Player ID. It must 12 ~ 16 system of Player Mac Address, Player name and etc. Player ID is sole serial number and it is usually called as MAC address ID. 2.4.3 Edit Player Pic 2.16 2.4.4 Set Playlist Click “Playlist “and then choose one certain Loop Composer. Basic unit is based on one composer. Method of setting Demand Composer and Insert Composer is same as Loop Composer.
Pic 2.17 2.5 Monitor Remote Monitor can format SD card, Player Reboot, Standby, Wake Up and etc. Pic 2.18 2.5.1 Player Setting: Through “Settings” and “Network”, user can finish general preferences for multiple players remotely through network.
Pic 2.19 2.5.2 Network Pic 2.20 2.5.3 Upgrade Upgrade: User can upgrade Software, Firmware and Settings and check version. Upgrade Packages need to be uploaded into server software from back-stage management. Notice: It should be very cautious during upgrading process and please keep player powered on.
Pic 2.21 2.5.4 Problems “Problem”: it can record Playback Abnormal, Time Abnormal, Reboot Abnormal and Power off statues. Playback Abnormal is defined as video playback is not finished in established time period plus another 30 seconds (like playback is dead or frozen). Time Abnormal is defined as time difference between server and player is beyond of five minutes.
2.5.5 Report Pic 2.
2.6 Accounts Accounts include User and Role. Set one Role or multiple ones. Each role can be assigned operation right. Then set one user or multiple ones and set certain role for each role. Set Role and choose related roles and edit Permissions. 2.6.1 Edit Role Pic 2.
Pic 2.25 2.6.2 Create User Pic 2.26 2.6.3 Assign Role Pic 2.
Choose related User and Role and then click “Update”. 2.7 Statistics User needs to open Play-log in advanced setting of Player. Pic 2.
3 Back-stage Management Back-stage Management needs to add admin after IP address: port number. For example, it is http://server IP address: port number/admin. Default Login Info is that Username (admin), Password (123456) and Verification Code. Back-stage Management includes Company, Software, Firmware, Weather, Junk File, User Log and etc. Pic 3.1 3.1 Company Default sub account is demo. User can create multiple companies. Every company is totally independent from each other.
Pic 3.2 3.2 Software Here, user can upload Terminal Software Package (like tar_CEAPP_8900.tenhz). After finish uploading, user can assign Software Package to certain terminal and remote update software through network. Notice: Software Package must come from original Supplier. Or it causes failed upgrade or other accidents. It is scrupulous to upgrade Software for terminal and forbidden power off during upgrading process. Pic 3.
3.3 Firmware User can uniformly upload Terminal Firmware Package (like tar_CEROM_8900.tenhz) here. After finish uploading, user can assign Firmware Package to certain terminal and remote update software through network. Notice: Firmware Package must come from original Supplier. Or it causes failed upgrade or other accidents. It is scrupulous to upgrade Firmware for terminal and forbidden power off during upgrading process. Pic 3.4 3.
Pic 3.5 Edit Weather: Pic 3.6 3.5 Junk File Files which are deleted are temporarily saved in Junk File. User can choose Delete or Restore them. Restore operation will make file be back to root directory of Resources of related Administrative Domain.
Pic 3.7 3.6 Statistics In Statistics, user can check all play-log or delete them all. Pic 3.
4 Common Tools 4.1 Standalone Export Software If network is not available for hardware terminals or the player cannot connect to the server, users can use Standalone Export Software to export the playlist into the root directory of the empty USB drive or directly publish to the SD card. Standalone Export Software running environment needs Microsoft .Net Framework 2.0, please install Microsoft .Net Framework 2.0 if it is not in your computer.
Pic 4.2 4.2 Templates Update iDS6 V5.0 or higher version can support templates management functions, which allows to install and import the embedded templates package, also can support to build new templates based on the embedded templates, in program making users can quote/use the embedded templates or new defined templates. Regarding embedded templates import, please go to START- All Programs-iDS6 Set – Advanced-Update Templates (name for example: iDS6_RES_yyyymmdd.
5 FAQ 5.
Pic 4.5 Example of checking the server website port and control port by telnet (Assumed that server IP address is 192.168.1.4. telnet to the server from other computers with same network with server), as shown in the below picture, if all black interface occurred, which means telnet is normal. Pic 4.6 5.
blocked the Java plug in program. For IE browser, users can check if JRE and related Active X are installed and applied by checking the browser interface tool “Internet” “Advance”; For Google Chrome, it will directly warn if install or update the Java Plug in program wen software running. 5.3 Flag Plug in Program Installation V4.3 iDS6 software or higher version has not adopted the Java Plug in program for contents uploading and program making, which adopts flash plug in.
save it. Then replace the file with same name in newly installed software. Note: Since different versions of software adopts different mysql-server and apache-tomcat programs, so the numbers in the above mentioned files might be different, users just need to check the detailed directory with same prefix. 5.6 Add City Weather V4.
Pic 4.
User Manual for ZEMSO-ODF550-AT Running on Hardware Terminals Version：5.5 Date Updated：2015.4.
Contents 1 Introduction ..................................................................................................................- 1 - 2 Functionalities Introduction ..........................................................................................- 2 - 3 2.1 Network Setting ............................................................................................- 2 - 2.2 Player Setting...............................................................................................
1 Introduction Hardware Terminal iDS6 Software is embedded on the Android board of the media player or all in one screen, which will automatically run the terminal program to access into the playing status after the mainboard turned on, Press “Info” button on remote control (for non-touch screen) or quickly click any corner 4 times on screen (only for touch screen) can allow users to view the hardware terminals running status information including Player ID, Resolution, Play Path, APP Version, Kernel Versio
2 Functionalities Introduction Hardware Terminal Setting Interface includes 7 functionality buttons: Network, Player, Advanced, Online/Offline, Guide, Reboot and Start Player. Pic 2 2.
Pic 3 In Hardware terminal “Sever setting”, “Server IP” should be the IP address or domain name of the information publication server (computer with iDS6 software installation).
Ethernet setting is as follows: Users can select “Obtain IP from a DHCP Server”(it is recommended to use if the local network area has DHCP server) or use the static settings below (It is recommended to use if local network area has no DHCP server or DHCP IP address is not allowed to use) Pic 4 WiFi Network Setting is as follows: Users can use the “search” button to search WiFi by refresh or update the wireless AP list and select the suitable AP (users also can input the AP by hands with the help of remot
2.2 Player Setting Player setting interface is shown in the following picture, including player information displaying (Available space, APP version, System Version, Campaign and Player ID), player information editing and settings for parameters of all personalities of the hardware terminals. Pic 7 “Setup” button interface on the information of the player is shown in the following picture, which allows users to edit the player ID, Corp ID and Player Name.
Pic 8 Player system configuration functions include volume setting, brightness setting, power on/off time setting, standby setting, downloading intervals setting, On-demand intervals setting, date and time setting, Login password setting, contents management… -7-
Volume settings interface is as shown in the below picture, users can set max five time periods volumes for hardware terminal. In default, hardware terminals have a volume for 00:00~23:59.
Brightness settings interface is as shown in the below picture, users can set max five time periods brightness for hardware terminal. In default, hardware terminals have certain brightness for 00:00~23:59. Generally, brightness value 0 is darkest, 10 means most bright. However, some LED screen has an opposite logic on brightness.
Power on and off setting interface is as shown in the below picture, including daily mode and weekly mode. Daily mode means users can define daily on/off time for hardware terminals; if users want 24hours working set it 00:00~00:00. Weekly mode means users can define power on/off time based on week for hardware terminals; if users want 24hours on Sunday, set it 00:00~00:00.
Standby intervals setting is shown as in the below picture, users can set max five standby intervals for a hardware terminal. 00:00~00:00 means the blank configuration. Contents will stop playing and screen will go to black once the hardware terminal accesses into the standby condition.
Download intervals interface is as shown in the below picture, users can set max five download intervals for a hardware terminal, 00:00~00:00 means blank configuration; 00:00~23:59 means downloading can be available for any time of the whole day. Hardware terminals only download contents from server within the download intervals set by users. Note: configuration, program and system package downloading is not limited to the download intervals.
On-demand Intervals interface is as shown on the below picture, users can set max five on-demand intervals for a hardware terminal, 00:00~00:00 means blank configuration; 00:00~23:59 means on-demand is available any time of the whole day. Hardware terminal only can play on-demand programs within the on-demand intervals set by users.
Hardware Terminal Date and Time setting interface is as shown in the below picture. Users can manually set the terminal date and time. The terminal will check with the server once terminal rebooted, it will be automatically revised to the server time if the difference between it and server more than 5s.
Hardware Terminal Login Password Setting is shown as in below picture, users can set a password consisting of 6 numbers. Once password set, a login password interface will be shown if the users want to go to setting interface for setting. If users forgot password, can set or clear the password by remote control via server. Pic 16 Contents management interface is shown as in the below picture, users can access into the loop, on-demand and insert campaigns via “playlist” button.
Pic 17 Pic 18 - 16 -
2.3 Advanced Settings Hardware terminal advanced settings is shown as in the below picture. “Play Path” means the storage place of the current contents playing, including mainboard memory, SD card, USB disk; if the hardware terminal shows “no playlist”, users can check if the play path is correct or not. “Rotation” button is used to set the rotation angle of the Android system; 0 and 180° is suitable for landscape model, and 90 and 270° is suitable for portrait model.
Pic 19 2.4 Network & Standalone Mode Network and standalone modes exchange interface is as shown in the below picture. The default mode is network mode. If setting as standalone mode, hardware terminal can automatically play the current contents in full screen from pictures, videos in sequence from designated storage path. “Rotation” button is used to set the rotation of the screen and contents. “Playtime” means each picture playing time.
Pic 20 2.5 Reboot “Reboot” button is used to reboot the hardware terminal. 2.6 Start Player Press “Start Player” button after hardware terminal configuration finished. Terminal will play the program made in sever.
3 ANNEX 3.1 Resolution for each size of the panel Screen Size Landscape Portrait 12’’ 1280x800 800x1280 19’’ 1368x768 768x1368 22’’ 1920x1080 1080x1920 26’’ 1368x768 768x1368 32’’ 1368x768 768x1368 42’’ or larger 1920x1080 1080x1920 HDMI HD 1280x720 720x1280 HDMI Full HD 1920x1080 1080x1920 VGA General 1360x768 768x1360 AV PAL 720x576 576x720 AV NTSC 720x480 480x720 3.
Audio Formats：MP3, WMA, WAV, EAAC+, APE, FLAC, BSAC, OGG and etc… AC3 and DTS are not supported because of uncommitted. Video Coding supported: MPEG-1/2/4, H.263, H.264, WMV9, RV8/9/10, Divx-3/4/5 Video Formats：MKV, MOV, MP4, AVI, TS, MPG, ASF, FLV, OGG, RM and etc… Notice: The best is H.264 encapsulated by AVI, 1920*1080 resolution, and the recommended stream is 8~10Mbps; It needs more resources to decode WMV formats. And its formats is 4~6Mbps by recommended. 3.
FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
