User's Manual

3
Steps for using the device
1.1
1.2
1.3
Press and hold the power button to start the device.
(Optional) Press the content switch button to display the "purchase
package" QR code.
(Optional) Scan the QR code with your mobile phone to visit the
online shop .
Step 1: Power on
2.1
2.2
Scan the QR code from step 1 again in online shop to perform device
binding.
Choose the suitable data package in online shop and pay for it.
After purchasing a traffic package, please reboot your device to
make the new data package effective.
Press the content switch button to display the WiFi SSID, PW on the
screen, set the SSID, password of WiFi connection in the settings of
your phone or computer, and connect to WiFi hotspot.
If your phone supports scanning QR code to connect to WiFi, press
the content switch button to show "set WiFi" QR code on the screen,
use your phone's camera to scan the QR code to set WiFi
connection.
Step2: Purchase data package(optional)
3.1
3.2
Note: If you have purchased a data package at the same time as the
device, you can only perform step 1.1 to turn on the device and
perform step 3 to connect WiFi, you can access the internet then.
Step3: Connect to WiFi hotspot
To check usage, press the content switch button to display the usage
information on the screen.
Step4: Check usage of data package
If you need to modify the SSD, Password of WiFi , your mobie phone or
computer need to access the devices' WiFi hotspot, then login
192.168.100.1 with web browser . The default login user name: admin,
default login password:admin.
Step 5: Modify WiFi SSID , Password (optional)
Global Pocket WiFi T8
User Manual
Uesd M
Total 254 M
Speed: High
11:08
209
When not operating the device, the screen will go off automatically after
15 seconds, short press the power button to light up/off the screen.
Product appearance and interface description
1
Long press for 3 seconds to turn on or off the device.
Short press the power button to light up or turn off the screen.
Power button
In the off state, you can insert your nano SIM card(4FF) for use.
SIM card slot
Type-C USB port
SIM card holder
Lanyard hole
SIM card slot
Power button
Charge indicator
Type-C USB port
Screen content
switch button
Screen
Screen content switch button
Press this key to switch between different displays.
Screen
Insert the card pin in to the small hole on SIM card holder to remove the
card holder from device,put the SIM card in the holder, and then load the
SIM card holder into the device.
Charge your device by connecting the charging plug via the Tye-C USB
cable.
The following information are displayed on screen: 3G/4G network signal
strength, usage of data plan, WiFi SSD and password etc.
This device supports VSIM technology, which can be used without
inserting a physical SIM card. To use VSIM, you need to purchase a data
package from SP (Service Provider).
The charging environment temperature is between 0℃-45℃; After
one year of normal use of charging and discharging, the battery
capacity will be reduced by about 20%.
Please do not over discharge or over charge the battery. When the
device is not used for a long time, suggest you charge the device once
2 months.
Device heating are normal when working, it can be used normally. The
device can be placed in a cool and ventilated place to do correspond-
ing cooling treatment.
2
Product specification
Network and bands
Colour
Dimensions
Weight
Battery capacity
Power input
Charging time
Normal working hours
Gray
60mmⅹ110mmⅹ13mm
100g
3500mAh
USB TYPE-C DC 5V/1.5A (AC 100V-240V)
~3.5h
~15h
Global 2G/3G/4G
TDD
-LTE:B41
3G WCDMA/HSPA:B1/B2/B4/B5/B8
2G GPRS/EDGE:B2/B3/B5/B8
CAT4, DL 150Mpbs, UL 50Mbps
802.11 b/g/n 2.4G
Max 8 concurrent connected users
Peak Rate
WiFi
WiFi users
F
DD-LTE: B2/B4/B5/B7B12/B13/B17/B25/B26/
B66
Notes:
①
②
③
Turn the device off and on again, when the 4G appears on the
upper left corner of the screen, then reconnect to the WiFi to use
the network.
Check the network signal strength indicator in the upper left corner
of the device screen, and when it indicates a weak network signal,
please change the device location and try again.
Check the power of the device, if the power is insufficient, please
charge it on time.
4
Quick Troubleshooting
Please check that a properly working charging cable and charging
plug are used and charge for a period of time before trying to boot
the device.
Please check the charging port for any abnormalities such as
looseness.
Please confirm whether the power button is loose or obvious
damaged, if there are abnormalities, please return for testing and
repairing.
After confirming the aboveis to use undamaged charging cable and
charging plug, the device can’t be charged, the device may be in
water or hardware abnormalities, please Please return for testing
and repairing.
1.WiFi device can’t be powered on / off
①
②
③
④
①
②
③
①
②
2.The WiFi terminal cannot access internet
Please turn off your phone's smart WiFi connection, or suggest you
try searching with another phone.
If WiFi signal still cannot be detected, please contact customer
service.
3.WiFi network detected but unable to connect to the network
Please check if the WiFi SSID, Password are set correctly.
4.Device’s WiFi cannot be detected
5.Network is connected but cannot access the internet
Please contact with customer service.
5 6
Safety Precautions
Do not disassemble the device (including battery) by yourself.
Do not subject the equipment to violent shocks and vibrations.
Do not use strong chemicals, cleaning agents and strong detergents
to clean equipment and accessories.
To clean the device, please turn off and disconnect the device from
the charging cable first.
When the device is finished charging, disconnect the device from the
charging cable and unplug the charging head from the power socket.
Do not place the device around heating equipment such as
microwave ovens, ovens, etc.
When the charging cable is damaged, do not continue to use.
Do not throw the device into fire.
Do not replace the device parts (including the battery) by yourself.
Please comply with local laws regarding the disposal of electronic
device, batteries and accessories, and support recycling initiatives.
Please do not dispose of this equipment, batteries and accessories as
ordinary household waste.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
FCC Warning
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may
cause undesired operation.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
Notes: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.This equipment
generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of
the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different.
from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
Notes: This device and its antenna(s) must not be co-located or operation
in conjunction with any other antenna or transmitter.
Specific Absorption Rate (SAR) information
This smart phone meets the government's requirements for exposure to
radio waves. The guidelines are based on standards that were developed
by independent scientific organizations through periodic and thorough
evaluation of scientific studies. The standards include a substantial safety
margin designed to assure the safety of all persons regardless of age or
health.
This cquipment should be installed and operated with
minimum distance of 10mm the radiator your body. The body-worn
test distance is 10mm.
Disclaimer:
Please be aware that if you do not use the device in accordance with this
User Guide, we assume no responsibility.