Installation Instructions

ND0A0 Product Introduction Quick installation
Insert cable port into the Type C port, Ethernet port (insert the network cable if have);
Connect the adapter to the mains；
Put P2 on POS Base, then start charging, or access internet through the POS Base (optional)
If you need to change the WiFi configuration of the POS Base, enter P2 settings,“Wireless and
Network - More”, ”POS Base Settings”.
Charging and Display Instructions
This machine only supports 5V/2A – 3A Type C cable charging.
When charging, the screen will display the corresponding icon.
Ethernet Port (Optional)
Type C Port
Threading Position
USB Port
Ethernet Port (Optional)
Used for Ethernet access, offer network to P2
via WiFi. And the POS Base can be connected
to P2 without any setting.
Reset Hole (Optional)
Used for reset POS Base WiFi.
Threading Position
Used to constrain the card position of the
peripheral connection, making the cable
more orderly.
USB Port
2 USB ports, used for peripheral connection,
such as scan code gun, keyboard, mouse
and etc.
Type C Port
Supply power for P2 and POS Base.
Reset Hole (Optional)
3
1
2
3
1
2