Operating Instruction

USB data transfer interface,

connect keyboard or mouse

operation or control P2 PRO

screen interface.

USB data transfer

interface, connect

keyboard or mouse

operation or control P2

PRO screen interface.

Type C interface, with P2PRO

charging cable and adapter

connected to the power supply to

charge P2PRO.

The P2 PRO sensor head

needs to be aligned with the

PIN connector for charging

and data transmission.

ND050 Operating instruction

ND050 is a P2PRO special charging base, with charging function and

expand keyboard and mouse peripheral accessories function.

PAGE 1
ND050 Operating instruction ND050 is a P2PRO special charging base, with charging function and expand keyboard and mouse peripheral accessories function. Type C interface, with P2PRO charging cable and adapter connected to the power supply to charge P2PRO. USB data transfer interface, connect keyboard or mouse operation or control P2 PRO screen interface. USB data transfer interface, connect keyboard or mouse operation or control P2 PRO screen interface.
PAGE 2
Name ND050 Use For POS Base Working temperature 0°C---40°C Storage temperature -20°C---70°C Pogo PIN Number 8 Pogo PIN Definition VBUS/NC/GND/DP/DM/GND/ID/VBUS Input Voltage DC 5V Input Current 2A Output Voltage DC 5V Output Current 2A Interface Type C HOST Interface 2 Type A FCC ID: 2AH25ND050 This device complies with part 15 of the FCC Rules.
PAGE 3
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.