User's Manual

M1 User Guide
Hazardous/Toxic Substances and Content
Table of the Product
Contents of Package
Warranty Card
Product technical index
Warranty Card
Product Name:
Product Model:
Product No.:
Purchase Date:
Warranty Period: Warranty service by our company is
available within ___ days upon purchasing.
Free warranty is not provided in following conditions:
· Products are disassembled and repaired without
permission.
· Product barcode and fragile sticker are damaged, and
the warranty card is obliterated or broken.
· Malfunction caused by operations without complying
with requirements in the manual.
· Malfunction caused by water soaking or falling, and
man-made damage like scratching or breaking.
· Malfunction or damage caused by force majeure.
· Beyond the warranty period.
Contact Methods:
· Business address:
· Telephone number:
Statement
The company is not responsible for the following behaviors:
· Damages caused by using and maintaining the device without following the User Guide;
· Damages or problems caused by selection of objects or Consumables (products which are
not the initial ones provided or recognized by the company). In this case, the company will
not undertake any responsibility. No one is entitled to modify or change the product unless
permitted by the company.
Disclaimer
Discrepancies between the product and the file concerning detail s may raise due to
product updates. Please be subject to the material object. The company reserves the right
to interpret the file and the right to revise this manual withou t prior notices.
Products reaching or beyond service life for environmental protection shall not be
discarded anyhow but recycled as per the stipulations set out in the Control and
Administrative Measures on Electronic Information Products.
Body*1
User Guide*1 (including Contents of Package, Warranty Card and Product Certificate)
Charging dock*1
Indicates that the concentration of the hazardous substances in all
homogeneous materials in the parts is below the relevant threshold of
the SJ/T11363-2006.
Indicates that the concentration of the hazardous substances of at
least one of all homogeneous materials in the parts is above the
relevant threshold of the SJ/T11363-2006; However, the content of
the parts marked with "×" is above the standard due to the fact that
there is not mature alternative technologies in the industry.
Parts
Name
Circuit card
assembly
Lead
（Pb）
Mercury
(Hg)
Cadmium
(Cd)
Hexavalent
chromium
(Cr(VII)
Polybrominated
biphenyls
(PBB)
Polybrominated
diphenyl ethers
(PBDE)
Hazardous/Toxic Substances or Elements
WIFI
Camera
FLASH
Battery
O/S
CPU Frequency
Button
Mircrophone
LCD Screen
Bluebooth
Speaker
RAM
Interface
Touch screen
3G
WIFI 802.11b/g/n（2.4G）
200W FF Macro
4GB Nand Flash
3.7V/3000mAh
Android 5.1
1.3GHZ Quad Core
1xpower button 、1xscan button
1xMIC,Acoustic Wave Payment Supported
4.5''TN,FWVGA 854*480
Bluetooth3.0/4.0，IBEACON supported
Single Track 1W,Volume Up to 90 DB(Adjustable）
512MB DDR2
Micro USB Debug Port,SIM card slot,4 section headphone hole,
charging thimble
Capacity Dual-point Touch screen
GSM 900/1800/850/1900、WCDMA 850/1900
Dimension
Thimble Type
Charging Base
Terminal：length148mm*width73mm*height23mm
Charging Base：Length104mm*Width74mm*Height 68mm
INPUT：AC100~240V/1.5A 50/60Hz
OUTPUT：DC5V/1A
CPU MTK MT6580M
Configuration Main specifications
FCC Regulations:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the
user‘s authority to operate the equipment.
FCC RF Exposure Information (SAR)
This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the
Federal Communications Commission of the United States.
During SAR testing, this device is set to transmit at its highest certified power level in all tested frequency bands, and placed in positions
that simulate RF exposure in usage near the body with the separation of 5 mm. Although the SAR is determined at the highest certified
power level, the actual SAR level of the while operating can be well below the maximum value. This is because the device is designed to
operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless
base station antenna, the lower the power output.
The exposure standard for wireless employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set
by the FCC is 1.6W/kg.
The FCC has granted an Equipment Authorization for this model device with all reported SAR levels evaluated as in compliance with
the FCC RF exposure guidelines. SAR information on this model device is on file with the FCC and can be found under the Display
Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: 2AH25M1.
For this device, the highest reported SAR value for usage near the body is 1.20 W/kg.
While there may be differences between the SAR levels of various devices and at various positions, they all meet the government
requirement.
SAR compliance for body operation is based on a separation distance of 5 mm between the unit and the human body. Carry this
device, at least 5 mm away from your body to ensure RF exposure level compliant or lower to the reported level. To support body
operation, choose the belt clips or holsters, which do not contain metallic components, to maintain a separation of 5 mm between this
and your body.
SUNMI W5910