User's Manual

Intelligent Control Egress Device series
 Contactless Egress Button integrated with Door Controller (all-in-one) – simple to install but SAFE.
 Friendly Installation – One “ICED-s” can replace the Exit Button, Break Glass Unit, Door Controller as well as
the Remote Exit Button.
 Safe – The lock control is inside the premises.
Design Philosophy
Abbreviation
 ICED-i : Single Door Controller embedded with Basic Contactless Exit device
 ICED-s : Single Door Controller embedded with Contactless Exit Device and Break Glass Simulated
functional device
 More reliable capacitive proximity technology has been used instead of Infar-red technology, which will NOT
false trigger by ventilation, sunlight, white object; and the read range will not detent.
 When the device is activated, indicator light will change with an audible tone.
 Icon indicators for Door Held Open, Fire Alarm and Mains Failure situation.*
 Simulated Break Glass function with Visible and Auditable alert to provide better indication of the door location
under emergency situation (only available for “s” version).
 Build-in Door Chimer and can be trigger by Magic series number pad reader by pressing the “*” sign.
 Remote button is available as an option.
Egress Technology & Functions
ICED-S ICED-i
 Can support any Wiegand output reader and IN/OUT reader module is an option.
 Support Card Only; Card plus PIN; and PIN only mode. PIN is definable from 4 to 8 digits.
 Support 2000 card capacity and 20,000 audit records.
 User can set their own Add/ Delete/ Clear function card – easy to manage when standalone.
 Support Keypad Programming.
 Function Cards can only be use after activation of the Egress Device inside – to make sure the person can
enter the premises.
 Time schedule allow user to define Door Unlock mode. Supported “Timed Unlock” or “Trigger Unlock” mode.
 One dry contact input for door unlock & one definable alarm output.
Door Controller Functions