Development Kit Manual SIM345-EVB_UGD_V1.
SIM345 EVB User Guide Document Title: SIM345 EVB User Guide Version: 1.02 Date: 2008-2-15 Status: Release Document Control ID: SIM345-EVB_UGD_V1.02 General Notes SIMCom offers this information as a service to its customers, to support application and engineering efforts that use the products designed by SIMCom. The information provided is based upon requirements specifically provided to SIMCom by the customers.
SIM345 EVB User Guide Contents Contents ............................................................................................................................................3 1 SIM345 EVB .................................................................................................................................5 2 EVB accessory ...............................................................................................................................7 3 Accessory Interface ..................
SIM345 EVB User Guide SCOPE This document give the usage of SIM345 EVB, user can get useful info about the SIM345 EVB quickly through this document. The SIM345 only supports 850MHz/1900MHz functions. This document is subject to change without notice at any time. SIM345-EVB_UGD_V1.02 4 15.02.
SIM345 EVB User Guide 1 SIM345 EVB Figure 1: EVB TOP view SIM345-EVB_UGD_V1.02 5 15.02.
SIM345 EVB User Guide Figure 2: EVB BOTTOM view A: B: C: D: E: F: G: H: I: J: K: L: M: N: O: P: Q: S: SIM345 module interface SIM card interface Headset interface Charge switch, switch on or off charging function Download switch, turn on or off download function ON/OFF key, turn on or turn off SIM345 Buzzer Expand port, such as keypad port, main serial port, SPI port Main serial port UART1 for downloading, AT command transmitting, data exchanging General Purpose output or input ports for customers’ applic
SIM345 EVB User Guide 2 EVB accessory Figure 3: EVB accessory A: Antenna B: Antenna transmit line C: Headset D: 5V DC source adapter E: USB to serial port line SIM345-EVB_UGD_V1.02 7 15.02.
SIM345 EVB User Guide 3 Accessory Interface 3.1 Power Interface Figure 4: Power Interface Pin Signal I/O Description 1 Adapter input I 5V/2.5A DC source input 3.2 Audio Interface Figure 5: Audio Interface SIM345-EVB_UGD_V1.02 8 15.02.
SIM345 EVB User Guide Headset interface: Pin Signal I/O Description 1 MIC2P I Positive microphone input 2 SPK2P O Positive speak output 3 SPK2N O Negative speak output 4 MIC2N I Negative microphone input Earphone interface: Pin Signal Input/Output Description 5 MIC1P&SPK1P I/O Auxiliary positive input and output 3.3 SIM card interface Figure 6: SIM card interface SIM345-EVB_UGD_V1.02 9 15.02.
SIM345 EVB User Guide 3.4 Antenna Interface Figure 7: Antenna Interface SIM345-EVB_UGD_V1.02 10 15.02.
SIM345 EVB User Guide 3.
SIM345 EVB User Guide Auxiliary serial port (UART2): Pin Signal I/O Description 2 RXD2 O Receive data 3 TXD2 I Transmit data 5 GND GND 3.
SIM345 EVB User Guide 4 Test Interface Figure 11: Test interface overview 4.1 Serial Interface J104—UART1 serial port Figure 12: J1 Interface RS232 Interface Pin List: Pin Signal I/O Description 1 RTS I Request to Send 2 DCD O Data carrier detection SIM345-EVB_UGD_V1.02 13 15.02.
SIM345 EVB User Guide 3 RXD1 O Receive data 4 TXD1 I Transmit data 5 DTR I Data Terminal Ready 6 CTS O Clear to Send 7 DSR I 8 GPIO4 I/O Transmit or receive data 9 RI O Ring Indicator 10 GPO1 O Transmit data 4.2 J102---KEY & POWER Figure 13: J102 Interface KEY & POWER Pin List Pin Signal I/O 1 COL0 O 2 ROW0 I 3 COL1 O 4 ROW1 I 5 COL 2 O 6 ROW2 I 7 COL 3 O 8 ROW3 I 9 COL 4 O 10 ROW4 I 11 CHG_IN 12 GND 13 VDD 14 VBATT SIM345-EVB_UGD_V1.
SIM345 EVB User Guide 4.
SIM345 EVB User Guide 5 EVB and accessory equipment At normal circumstance, the EVB and its accessory are equipped as the Figure 15 Figure 15: EVB and accessory equipment SIM345-EVB_UGD_V1.02 16 15.02.
SIM345 EVB User Guide 6 Illustration 6.1 Running (1) Connect the SIM345 module to the 60 pins connector on SIM345 EVB, inserting 5V direct current source adapter, switching the S103 switch on off state, S202 switch on ON state; (2) Press the ON/OFF for about 2 second, and then SIM345 module begins running. You can see the light on the EVB flashing at a certain frequency. By the state, you can judge whether the EVB and SIM345 can run or not.
●RF exposure requirements To allow compliance with RF exposure requirements,the SIM345’s maximum output power is 33dBm in GSM850/GSM900 band,or 30dBm in DCS1800/PCS1900 band, and the maximum antenna gain is 3dBi,and the minimum cable loss is 0.5db. ●The Antenna Parameter of SIM345 VSWR(Max.)Operation GSM850/GSM900 DCS1800/PCS1900 ≤2.5 ≤2.5 ≥3 ≥3 >0dBi > 1dBi >30dBm >27dBm band VSWR(Min.