SIM548Z GPRS Startup SIM548Z_GPRS Startup_V1.
SIM508Z GPRS Startup Document Title: SIM548Z GPRS Startup Version: 1.00 Date: Status: Created Document Control ID: SIM548Z_GPRS Startup_V1.00 General Notes Simcom offers this information as a service to its customers, to support application and engineering efforts that use the products designed by Simcom. The information provided is based upon requirements specifically provided to Simcom by the customers.
SIM508Z GPRS Startup SCOPE Thanks you select SIMCOM GSM/GPRS module. This product has standard AT command interface, and can provide GSM call, short message and GPRS net services, etc. Please read this user guide carefully. You can realize the powerful function and the easy operation method of the module. This module is used in voice or data communication mainly. We are not charge with the duty of personal injury and property loss for the custom abnormal operation.
SIM508Z GPRS Startup Contents 1 Introduction.................................................................................................................5 1.1 References..........................................................................................................5 1.2 Abbreviations .....................................................................................................5 2 What you need .............................................................................................
SIM508Z GPRS Startup 1 Introduction This document describes how to establish a PPP connection with Microsoft Windows NT4.0 using the prototype of GSM/GPRS. Configurations and settings for other operating systems (Windows 2000/XP) may slightly different, but the general proceeding is similar. 1.1 References /1/ SIMCOM_ATC /2/ Request for Comments: 1661 - The Point-to-Point Protocol (PPP) /3/ Request for Comments: 1994 - PPP Challenge Handshake Authentication Protocol (CHAP) 1.
SIM508Z GPRS Startup 2 What you need 2.1 GPRS settings from your network provider Before you can set up your device to access the GPRS network, contact your network provider to obtain the GPRS service. 2.2 Modem installation and configuration You will need to set up the modem driver. Follow the steps in chapter 3. Note: Administrator rights for the operation system may be needed in order to install modem driver. Connect your local system administrator for advice. 2.
SIM508Z GPRS Startup 3 Setting up a Windows modem driver 3.1 Adding a new modem If no standard 19200bps modem has been installed, add a new standard modem to the modem section of the control panel. Click Start -> Setting -> Control Panel -> Phone and Modem option -> Modem -> add SIM508Z_GPRS Startup_V1.
SIM508Z GPRS Startup Follow the instructions on the screen and choose “19200 bps modem” and “COM1”, click “NEXT”, till to finish the configuration. SIM508Z_GPRS Startup_V1.
SIM508Z GPRS Startup 3.2 Configuring the modem driver Choose the installed standard 19200bps modem, click “Properties”, choose it max port speed (default value: 115200), and click “Advanced” to configure “Extra setting” as illustrated in the figures below. You can change the “cmnet” to your access point name (APN). SIM508Z_GPRS Startup_V1.
SIM508Z GPRS Startup 4 Setting up the Dial-Up network 4.1 Adding a new connection From the control panel select “Network and Dial-Up Connections” and then “Make new connection”. Select “Dialup to private network” -> click “Next” SIM508Z_GPRS Startup_V1.
SIM508Z GPRS Startup 4.2 Configuring the setting Choose Modem – standard 19200bps modem (COM1) -> Click “Next” Type the number of GPRS connection (do not select “use dialing rules”) -> Click “Next” Choose “For all users” -> Click “Next” Type the name you want to use for this connection (such as “GPRS”) SIM508Z_GPRS Startup_V1.
SIM508Z GPRS Startup 5 Getting Started Ensure the “User name” and “Password” is blank -> Choose “Networking” tab, only choose “Internet protocol (TCP/IP)” -> Click “Properties”, setting DNS -> Click “OK” to finish the configuration SIM508Z_GPRS Startup_V1.
SIM508Z GPRS Startup -> Click “Setting”, configure the max speed “115200” Click “OK”, the connection is complete -> Click “Dial” SIM508Z_GPRS Startup_V1.
Contact us: Shanghai SIMCom Ltd. Add: SIM Technology Building, No. 700, Yishan Road, Shanghai,P. R. China 200233 Tel: +86 21 5427 8900 Fax: +86 21 5427 6035 URL: www.sim.
