User Instructions

INSTRUCTIONSTOPROGRAMAREMOTE:

1. Pressandreleasethelearnbuttononthebackofthemotorunit.Thelightwillilluminatefor30seconds.This

indicatestheunitisinprogrammingmode.

2. Wit

hin15secondspressthebuttonyouwishtoprogramontheremotecontrol.

3. Youwillhearanaudibleclickand/orthelightonthemotorunitwillturnoffindicatingtheremotesuccessful

programming.

*Repeatsteps1‐3foranyadditionalremotesyouwishtoprogram.Wait60secondsbeforeprogramminganother

remotecontrol.

Product name：Remote Control

Model: GDR-41

PAGE 1
Product name：Remote Control Model: GDR-41 INSTRUCTIONS TO PROGRAM A REMOTE: 1. Press and release the learn button on the back of the motor unit. The light will illuminate for 30 seconds. This indicates the unit is in programming mode. 2. Within 15 seconds press the button you wish to program on the remote control. 3. You will hear an audible click and/or the light on the motor unit will turn off indicating the remote successful programming.
PAGE 2
FCC Statement: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.