Users Manual

GD‐R25

Prog

rammingLargeButtonorAUX:

1. Pressandreleasethelearnbuttonontheopenerhanginginyourgarage.Thelearnindicatorwillilluminate

for30seconds.

2. PresstheLARGEBUTTONorAUXbuttononthewallpanel.Youcanprogramupto2garagedoorsusing

thbuttons.

3. Theopener’slight willblinkand/oryouwillhearanaudibleclickindicatingsuccessfulprogramming.

ProgrammingtheLightbutton:

***AnexistingWIREDwallpanelisrequiredtoprogramthelightbuttononthiswirelesswallpanel!

1. Closethegaragedoor.

2. PressandholdtheLIGHTbu

ttononthewirelesspanel.

3. WhileholdingtheLIGHTbuttonpressandholdtheLIGHTbuttononthewiredwallpanel.

4. WhileholdingtheLIGHTbuttonspressandholdtheLOCKbuttononthewiredwallpanel.

5. Theopener’slights willflas hindicatingsuccessfulprogramming.

6. Testth

efunctionbypressingthelightbuttononthewirelesspanel.Theopener’slightsshouldturnonand

off.However,thedoorshouldnotmove.

FCC Statement

Any Changes or modifications not expressly approved by the party responsible for compliance could void

the user’s authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired

operation.