User's Manual

User manual

FCC ID: 2AA55HUNHE150

For Model: SBF6110-YQL150;

SBF6105B-YQL150;

SBD1105B-YQL150；

1. use

Shanghai Senben Lighting Technology Incorporated Company’s SBF6110-YQL150; SBF6105B-

YQL150，SBD1105B-YQL150；Maintenance-free, Energy-saving, Waterproof, Dustproof and

Corrosion-proof Factory Lamp, the light source is induction lamp, and has the high Luminous

Efficiency, longer lifespan etc features, the luminaire adopts the integrated structure, aluminum alloy

die-casted ballast box and incoming line cover with the surface painted with polyester powder, the

luminarie has good protection and corrosion proof performances, is applicabe for factory, exhibition

hall, big super market etc, special for mosit, dusty lighting of indoor and outdoor places；This

product is applicable for the common lighting or emergency lighting of such indoor and outdoor place

with mech dust or damp such as factory ,airport,tunnel,especially power plant and its boiler unit,iron&

steel plant and

2. Feature

1. Maintenance-free, Energy-saving, Waterproof, Dustproof and Corrosion-proof Factory Lamp

manufactured by Shanghai Senben Lighting Technology Incorporated Company is device for factory

lighting, have good protection, the performance is reliable.

2.The luminarie adopts the integrated structure, closed structure, and pendant mounting type, have the

independent light source cavity, electrical appliance cavity and connection cavity

3.The luminarie's electrical appliance cavity and connection cavity shell is die-casted by aluminum

alloy, the surface is sprayed by pure polyester powder.

4.The light source cavity is spined by pure Aluminium sheet. The reflector is undergone anodic

oxidation treatment, High reflectivity, good Oxidation resistance, long life-span. The light source

cavity is adopted anodic oxidation treatment or polyester powder spraying, have good corrosion proof

performance.

5.The luminarie is equipped with toughened glass transparent plate, high luminousness, good high

intensity and good impact resistance

6.The connection cavity and electrical appliance cavity connection is fast dismantling structure, and

prevent the trouble operation in aloft work, and is convenient for luminarie installation and

maintenance.

7. Induction lamp is selected to be the fixture's light source, and is equipped with high stable

frequency and high stable power output ballast, has the advantages, such as, voltage can be widely

used, high light efficacy, no visual fatigue, long lifespan etc

8.This product is of flame-proof and increased safety structure, O type sealing rings are adopted in the

flame proof joints to make this product fulfill the dust-proof structural requirements. The flameproof

electrical box, increased safety illuminant chamber and junction box are casted from aluminum alloy

PAGE 1
User manual FCC ID: 2AA55HUNHE150 For Model: SBF6110-YQL150; SBF6105B-YQL150; SBD1105B-YQL150； 1.
PAGE 2
and painted with polyester on the outer surface. 9.The tensile strength of the aluminum alloy enclosure is no less than 120MPa and content of magnesium and titanium of the enclosure is no more than 7.5% of the total content, the enclosure is anti-corrosion. See Figure 2 for the light structure. 10.The flame proof electrical box shall subjected to specified internal explosion without any damage, the flame proof threads will provide a flame path to cooldown the enclosure in case of internal explosion. 11.
PAGE 3
4． Warnning： This equipment is fit fr FCC 18th regulatin. Any change and modify have not been allowed will case the equipment’s using permission failure This product may cause radio interference, can not be mounted at the place near marine Safety communications equipment, and other navigation and communications equipment operating frequency between 0.45 -30 MHz. If this happen, pls change the output and move the luminaire, and away from other electrical appliances if this is happening.