User's Manual

1 / 3
User manual
FCC ID:
2AA551105B6105B80；
For Model: SBD1105B-YQL80;
SBF6105B-YQL80;
1. use
Shanghai Senben Lighting Technology Incorporated Company’s SBD1105B-YQL80/SBF6105B-
YQL80Maintenance-free, Energy-saving, Waterproof, Dustproof and Corrosion-proof Factory
Lamp, the light source is induction lamp, and has the high Luminous Efficiency, longer lifespan etc
features, the luminaire adopts the integrated structure, aluminum alloy die-casted ballast box and
incoming line cover with the surface painted with polyester powder, This product is applicable for
the common lighting or emergency lighting of such indoor and outdoor place with mech dust or
damp such as factory ,airport,tunnel,especially power plant and its boiler unit,iron& steel plant and
so on.
2. Feature
1. This product is of flame-proof and increased safety structure, O type sealing rings are adopted
in the flame proof joints to make this product fulfill the dust-proof structural requirements.
The flameproof electrical box, increased safety illuminant chamber and junction box are
casted from aluminum alloy and painted with polyester on the outer surface.
2. The tensile strength of the aluminum alloy enclosure is no less than 120MPa and content of
magnesium and titanium of the enclosure is no more than 7.5% of the total content, the
enclosure is anti-corrosion. See Figure 2 for the light structure.
3. The flame proof electrical box shall subjected to specified internal explosion without any
damage, the flame proof threads will provide a flame path to cooldown the enclosure in case
of internal explosion.
4. Increased safety chamber is used as a reflector,
it’s casted by aluminum plate with anodizing on
the internal surface and polycarbonate coated
on the external surface. Light with 120W and
150W illuminant has assistant reflectors.
5. The maximum surface temperature of the
enclosure shall be less than 80℃ without dust
layer.
6. Flat toughed glass or polycarbonate prisma can
be adopted as transparent plate.
7. Transparent plate and illuminant enclosure are
fixed with aluminum alloy made hoop, it’s
endurable and reliable with good oxidation
resistance.
8. Rubber sealing rings are adopted between flame
proof electrical box and increased safety
chamber, these will ensure the good ingress
protection performance.
9. Electromagnetic induction illuminant equipped
special ballast with high steady frequency and
high steady power, make the light is available
to work under a wide range of voltage with
long service life, it will also ease visual fatigue.
10. The light is provided with cable entries(compression nut type) with rubber sealing rings
inside for user’s convenience to wiring and cable sealing.
11
10
1
3
2
4
9
8
756
1-illuminant enclosure 2-illuminant 3-assistant
reflector 4-electrical box 5-junction box 6-
compression nuts cable entry 7-user terminal 8-
electrical box cover 9-ballast 10-transparent
plate 11-hoop
Figure2