PS4000 User Manual Version Record Version Date V01 2010-6-1 No.
PS4000 User Manual ........................................................................................................................1 1. Introduction.......................................................................................................................3 2. Technical Parameter ..............................................................................................................3 3. Outside View and Packaging.......................................................................
1. Introduction PS4000 is a handhold POS terminal. It supports bank card, Unionpay card, and electrical currency trade of foreign currency card. It support document print.
RTC RTC clock, variable1~2s/Day Battery RTC battery, inbuilt, last for 2 years Main battery: 7.4V 2000mAH lithium battery Power input DC 9.0V 4A adapter OS Linux Second time SAND SDK for Linux development Several download type optional, USB、TF card、serial port, support TMS Support Support about 100 applications multi-applicatio n Size 206×88×68.
3.
4.Function Interface Picture 4-1 4.1 Power Input Input DC, internal positive and outside negative, voltage scope 9-12V PS4000 standard power adapter: 9.5V/4A。 4.2 Keyboard PS4000 have 20 keys, 10 numeral keys, 10 numeral function keys.
00 double ‘0’ keys F1-F4 Multi-function key, normally for direction or page up or down Photo and scanner Camera Table 4-1 The terminal will give out beep sound if the key press is effect. The keyboard backlight also lights on and will light off 15 seconds after no key press is detected (time can be defined). Attention: Key pressing for long time will be treated as one time pressing event not several times. 4.3 LCD & Touch Panel PS4000 LCD is a 240×320 3.5' TFT screen with 24Bit RGB.
Picture 4-2 4.6 Magnetic Card The magnetic card reader is on one side of the terminal. Swipe the card with the magnetic strip inby in right or reverse direction. 4.7 Buzzer There is an inbuilt buzzer in the PS4000 terminal. It normally buzzes when key is pressed or to alert. 4.8 Serial Port There is a serial port at the left side of PS4000 terminal. It is standard RS232 serial port, while its structural interface is Mini-USB interface.
4.9 USB The USB port is at one side of the POS terminal near the serial port. This USB Host 1.1 port supports U disk, USB keyboard and mouse, etc. Attention: Maximum USB power supply is 500mA 4.10 T-Flash T-Flash card slot is at one side of the pos terminal. It supports standard T-Flash card. 4.11 Indicator There are 4 lights at front of the TFT LCD, from right to left they are for power, charge, RX, and TX. Power Power indicator of the system, if lights on means work of system.
4.12 Printer Picture 4-3 PS4000 printer adapts mini thermal printer with low power consumption. The paper roller is at front of the terminal with its size is 58mm (W) and 40mm (D). Please put in the paper roller when use.
Please recharge the battery with standard power adapter provided by SAND if it is running down, When battery recharge, if the terminal is power on, the screen will display charging indicator, if power off, the indicator in the screen will tell if charging is finished. Power indicator lights means it is charging and lights out means charging finished or no power adapter inserted. 4.14 RTC Built-in RTC clock in PS4000, and furnished with proprietary battery which can work for 2`3 years.
5. Installation and adjustment 5.1 Environmental Requirements The Product requests ventilation, suitable temperature, to avoid high temperature, humidity, corrosive gases, avoid direct sunlight. 5.2 Power Requirements Product within the power supply as 9.5V 4A is outside the negative. Charger must be used in the security area. 6. Repairs and maintenance 6.
Prohibited demolition at dangerous places, installing the battery pack. 7. System components PS4000 for portable electrical equipment, no correlation equipment. 8. Complete set Supporting the use of the following products: ADP036-094B Power Supply Thermal paper (57 × 40mm) 9. Safety precautions Read carefully before using this manual, the proper use of this product. Please keep this manual to properly check in at any time convenient place.
U.S. Government.These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons,regardless of age and health. The exposure of measurement known as the Specific Absorption Rate, or SAR.