SEED-7I0A-55 SEED-7I0A-55 User Manual
SEED-7I0A-55 Preface SEED-7I0A-55 is a new generation display screen of Shanghai Rising Digital Co.,Ltd.. It is a monitoring and control platform specially designed for construction machinery products. The display screen is based on cortex-a9 platform and adopts a new digital display scheme.
SEED-7I0A-55 1.Functions and features 7 Inch Touch screen with capacitive touch Internal integrated radio with external radio antenna Microphone voice input, audio output 4G, GPS, BLE Support two-way can communication, support ISO11898 CAN2.0B、J1939、CanOpen The interface uses te 2-6447232-3 connector.
SEED-7I0A-55 Inpu/ output 5 6 camera 4.2 Output switch 4.3 Audio analog signal output Audio analog signal output 5.1 Camera acquisition and display function Support NTSC / PAL analog camera, can access 1 channel, support single picture, picture in picture display Microphone input Support microphone input, Bluetooth phone function Microphone 6.1 Support switch output Product appearance structure function description 1、Appearance size unit：mm Fig.
SEED-7I0A-55 2、Installation dimensions Fig 2 display screen installation size The outer ring is fixed with 4 × M6 screws (including spring washer and flat washer), and the inner ring is fixed with 4 × M5 screws (including spring washer and flat washer).
SEED-7I0A-55 3、Product port function details name digital signal input Digital signal output function System settings Video input One button start remarks Power on and ground short circuit into BIOS, wiring harness is not connected SYS_SET 3 signal DI 30 signal output DO 8 signal output DO 9 Start signal A_GND 5 Power amplifier A_POWER 4 Power supply of power amplifier A_LF 6 Left channel A_RF 7 Right channel MUTE MUTE 16 amplifier MUTE STB STANDBY 23 amplifier STB C
SEED-7I0A-55 3.Product program download and upgrade 3.1 Hardware development platform Fig.3 USB interface for program download and upgrade of display screen To download and upgrade the display program, please loosen the screw of the metal cover plate on the left side of the display screen, connect the computer with the USB data cable, and download and upgrade the program cable through the upper computer. The USB interface is also used for screen program debugging.
SEED-7I0A-55 3.2 Software development platform It supports QT configuration software, adopts standard ide development environment, and can develop QT application program according to project requirements. Can refer to the commonly used sample programs, rapid development of applications.
SEED-7I0A-55 4.Connection with external controller It is connected with external controller through CAN bus and supports CAN2.0B, CANopen, J1939 and other protocols.
SEED-7I0A-55 User Manual 5.Description of product parameters and environmental indicators Number Product name 1 Video input 2 12V OUT Detailed 4 channel，PAL / NTSC signal 2 channel CAN：2 channel，Rate selectable ISO11898 CAN2.0B、J1939、 CanOpen； USB：1 channel，USB2.
SEED-7I0A-55 User Manual 7 Work environment 8 Outline size working temperature：- 20 ~ 65 °C Storage temperature：- 25 ~ 80 °C Overvoltage protection：37.2 V Anti vibration：4 - 300 Hz 10mm 5G Impact resistance：50G 6ms & 11ms Relative temperature：10 % ~ 95 % Protection level：IP 65 197×131.5×48.9（mm 6.Operating instructions Bluetooth: Turn on and find the Bluetooth logo in the main interface, turn on the switch, click to enter, Search the device, you can connect to use.
FCC Statement： Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference,and (2) this device must accept any interference received, including interference that may cause undesired operation.
