Applicable Models This manual will guide you to use Supernote, and the applicable model is Supernote A6 X. ¾ Specifications z Supernote A6 X Resolution 1872*1404 ͧ300DPIͨ Storage32G RAM2G Battery capacity 2900mAh ¾ Structures z Supernote A6 X Resolution 1872*1404 ͧ300DPIͨ Storage32G RAM2G 1.
Quick start 1.1 Power on and the initial settings 1澝 Hold the power button on the top right corner of device, until the Supernote logo appears If cannot turned on, the device might need to be charged (Please refer to FAQ: Unable to power on or freezing problem for help).
1.2 Connect to Wi-Fi 1澝 Activate the top status bar Swipe down from the top of the screen z Tap the settings icon “ ” on the top status bar z Tap “WiFi” 2澝 Wi-Fi z Tap “WLAN ON” z Select a SSID to connect (enter password if needed) z Tap “Other” to join a hidden network (enter SSID, security and password) If the Wi-Fi icon “ ” is lit up, the device is connected. (You can try to log in your account from your device to confirm the connection status).
1.
澝 Set account password z Enter the password twice z Tap “Register” *Note͵After completing registration, it will jump to "Successful login" page to bind your account to the device (Refer to "Cloud register and log in" or "Mobile APP quick login" to get more registration methods). The device can be only bound to a sole account and you have to reset the device to factory settings if you want to switch to another account (Refer to "Reset" to restore factory initialization settings).
㻮㼘㼡㼑㼠㼛㼛㼠㼔㻌 澝 Activate the top status bar z Tap the setting icon “ ” z Tap “connect device” z Tap“Bluetooth” 澝 OnʺBluetoothʺ page z Turn Bluetooth ON z Tap“Pairing” z Select the device to be paired, input pairing code if required
Office Support WORD document editing and browsing (support Bluetooth keyboard input editing) ϭ.
Note: Click page number to close thumbnail pages ϭ.2 Gesture to zoom in/out the page Use two fingers on the screen to zoom in and out ϭ.3 Repage View Click " " to enter the repage view.
ϭ.
FCC Statement Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
ISED RSS Warning/ISED RF Exposure Statement ISED RSS Warning: This device complies with Innovation, Science and Economic Development Canada licenceͲexempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.