Shanghai Qiangling Electronics Co., Ltd. TCPMESH8269-06 User Manual Bluetooth Module Module No.: TCPMESH8269-06 Version: V3.
Shanghai Qiangling Electronics Co., Ltd. Content 1. Introduction .......................................................................................................................... 3 2. Features................................................................................................................................. 3 3. Applications .......................................................................................................................... 4 4. Module Diagram ...................
Shanghai Qiangling Electronics Co., Ltd. 1. Introduction The module with internal PCB printing antenna is MESH Bluetooth Low Energy (BLE ) solution which is fully Bluetooth 4.0 standard compliant and allows easy connectivity with Bluetooth Smart Ready devices. IPBM-06 supports BLE slave and master mode operation, including broadcast, encryption, connection updates, and channel map updates. It is RoHS-compliant and 100% lead (Pb)-free.
Shanghai Qiangling Electronics Co., Ltd. ◼ Embedded Hardware AES ◼ Host Controller Interface (HCI) over UART, I2C and USB 2.0 in full speed ◼ Class 1 supported with 8dBm maximum TX power ◼ Operation Temperature: ET Version:-40 to 85 ℃, AT version: -40℃~+125℃ ◼ Bluetooth 4.0 1Mbps, Boost Mode: 2Mbps TX RF Power: +7.58dBm ◼ RX :-92dBm BT4.0 Sensitivity ◼ RSSI Monitoring ◼ Embedded LDO ◼ Battery monitoring ◼ Low power consumption ◼ 100k program/erase, 20 years data retention 3.
Shanghai Qiangling Electronics Co., Ltd.
Shanghai Qiangling Electronics Co., Ltd. PCB Thickness: 0.8+/-0.
Shanghai Qiangling Electronics Co., Ltd. 5. Module Schematic Please further contact if needed. 6. Pins Description Pin NAME Inter I/O Description 1 VDD face Power I DC 3.3V input, Max 3.6V, Min 3.
Shanghai Qiangling Electronics Co., Ltd. 17 COL3 Analog I/O SoC TLSR8267F512P29 Remote Port 18 COL2 Analog I/O SoC TLSR8267F512P30 Remote Port 19 COL1 Analog I/O SoC TLSR8267F512P31 Remote Port 20 COL0 Analog I/O SoC TLSR8267F512P32 Remote Port 21 AVDD1 Power I DC 3.3V input, Max 3.6V, Min 3.0V 22 AVDD Power I DC 3.3V input, Max 3.6V, Min 3.0V 7. Electronic Specification Item Specification RF Transmitting Power Level 7.
Shanghai Qiangling Electronics Co., Ltd. Operation Voltage 2.9V to 3.6V Operation Temperature -40 to 125 ℃ Security 128 Bit AES encryption Interface PWM, UART, I2C, USB. GPIO EMC/BQB approval FCC, BQB approved 8. Power Consumption Operation Mode Consumption Operation (TX/RX) 0dBm 30mA Standby (Deep Sleep) depend on firmware 0.
Shanghai Qiangling Electronics Co., Ltd. 9. Antenna Specification UNIT ITEM Frequency MIN MHz 2400 V.S.W.R TYP MAX 2500 2.0 Gain(AVG) dBi Maximum input power W Characteristics TYPE Meander IFA Polarization Vertical Radiated Pattern Omni-directional Impendence 50 SIZE 14 X 4 X 22 mm 0 1 Optional internal antenna by PCB printing antenna. 10. Ordering Information Part Number Description IPBM-06-00-I_V3.
Shanghai Qiangling Electronics Co., Ltd. 11. Package For special requirements, please contact the sales staff. 12. Reflow Profile 13.
Shanghai Qiangling Electronics Co., Ltd. 14. Antenna Design NO GROUND Copper Boundary Influence of GND on Antenna The GND interrupts the emission of antenna but isessential. RF vertical GND is important in antennadesign. Normally, the emission rate is improved as more GND is secured and edged GND of antenna is cut. 15. Critical Materials Please further contact if needed.
Shanghai Qiangling Electronics Co., Ltd. 16. Regulatory Module Integration Instructions 2.2 List of applicable FCC rules This device complies with part 15.247 of the FCC Rules. 2.3 Summarize the specific operational use conditions This module can be used in household electrical appliances as well as lighting equipments. The input voltage to the module should be nominally 2.9~3.6 VDC ,typical value 3.3VDC and the ambient temperature of the module should not exceed 105℃.
Shanghai Qiangling Electronics Co., Ltd. MESH8269 ”,or “Contains FCC ID: NIR-MESH8269”, Any similar wording that expresses the same meaning may be used. 2.9 Information on test modes and additional testing requirements a) The modular transmitter has been fully tested by the module grantee on the required number of channels, modulation types, and modes, it should not be necessary for the host installer to re-test all the available transmitter modes or settings.
Shanghai Qiangling Electronics Co., Ltd. a. Additional testing, Part 15 subpart B disclaimer The final host / module combination need to be evaluated against the FCC Part 15B criteria for unintentional radiators in order to be properly authorized for operation as a Part 15 digital device.
Shanghai Qiangling Electronics Co., Ltd. ISED RSS Warning: This device complies with Innovation, Science and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'ISED applicables aux appareils radio exempts de licence.
