Warning NE-TXEH0E 2 46Hz transmitter is not a toy. To ensure your safely, children under 14 years old are strictly forbidden from operating IL Eight dry calls are seeded for using this resole control any other inapplicable batteries are sightly forbidden. If you are not experienced in operating, we suggest you fo learn it under the guidance of a well-experienced operator. Manufacturer and distributor are exemplified from the responsibility of ihe product usage.
Operation and Reconstruction of 6-channel 1X For further convenient operation, wa replace the four general buttons by A, B,C and D interstate and the cores pounding relationship is as follows: A Enter Recover to default the button "A Is to enter into many, and to recover bo default in value adjustment setup. B Re tum the butter "BY Vista relic th menu. £ Confirmatory nonexistent the button "CIs to Save current setting values and enter into net step.
Operation and Reconstruction of 6-channel 1X The corresponding location is Illustrated below: NOR REY CELL proponents mix identifier, it will flash when sere if while go solid if there bs minx-control activate in stand by status, The four surrounding Indicating bar of LCD displays current trim suffusion when control stick is not pushing (throttle channel generally indicates current channel volume), while dips avs control volume when control stick is pushing.
Operation and Reconstruction of 6-channel 1X Function Advanced Modal type patriotism Transmitting power Helicopter Function Channel Reverse Function ~ Dual Rate Set COP mix setup General parameter General wing-mix (415.
Model No Operation and Reconstruction of 6-channel 1X G5 ’ Trainer SWE oa SW Friction description Operating slaps Specification Change the Mode! No from Ot 8. {standby 2 Press button A+B for one second, character MODE and Model No Ink simultaneously. 3.Press bullion Aor C, chiller "MODE Tights constantly, the Mods| No blinks. A. Turn tha dial plats D to choose the needed Model No. 5. Press button © to save tha current Model No, change he model date fo the value corresponding fo this these Mode! Ne.
JG Operation and Reconstruction of 6-channel 1X Poe! tune setup Function Dandelion Operation Slaps Instruction it otters sensations: Airplane and Helicopter 1. Place 1X10 stand by status, %. Pres bullpen "A" 4 "8" forgone second the “MODE” character and icon dash simultaneously, 3. Press bullpen "A or 0 the "MODE character {highs constantly, and the model type loon flashes, 4. Adulthood disk fo choose the model vape that |s needed. 5.
JG Operation and Reconstruction of 6-channel 1X Dual Rate setup: Function Deterioration Operation Steps Instruction When choosing high-rate or lows Tate mods for “AIL, PELT, "THR three channels, you can set twa values for the control slicks both sides Halt/right and spelldown separately to meet the servo tim or operation leafing adjustment. 1. Place Xin stand by stale. ¥.Press bunion A for ona second. The whole “HOR LEVY Instruction box and the channel flag "120458" lash together 3.
JG Ha wing mix Operation and Reconstruction of 6-channel 1X type wing mix Ho Tea pictured Bounces function Resorption Operation Steps instruction A Press bison A Orc, the "WIX character, ing current mixing mode, the current mixing channel blink and the numerical displacing earn Hash simultaneously, 9. Tum D fo sel wing-mix value, use corresponding betrayal stick to change parameter of rightist or up/down pairs {Press A one second to recover i to default) 10. Press C to save dale and enter into ned Search.
Operation and Reconstruction of 6-channel 1X pe ding owns underused Pa | Swing angle of control stick I index curve value index curve value is (BO. www, Finagle.
JG Five subsection curve self up of throttle channel Operation and Reconstruction of 6-channel 1X Function Description Operation Steps instruction Histamine operation sure for throttle, 1. Plugs [Xin stand by slats. 2. Press button Forgone second knothole "ROR REV! instruction box and the Chanel hg lash together. 3. Dial the D disc until the channel tag "123458" flashes, 4. Prostitution A Orc channelization "17 flashes.
JG Operation and Reconstruction of 6-channel 1X Operation example The process of setting operation curve of e elevator channel as positive vale 26% is as follows. Function Description Operation Steps Instruction 18 Is the process of gating operation curve of elevator channel as positive value 25%. 1. Place TX inland by sale. 2. Press bunion Alar one second, the whole "NOR REV" instruction box and the channel flag “123456 lash together 3. Dia the D disc until the channel flag "123456" Rashes, 4.
JG Operation and Reconstruction of 6-channel 1X function Indoctrination Preparation Taps instruction 10. Press button Aor Go channel flag "2 and ihe numeric ama flash simultaneous, 11.00althe Disc to set the parameter value ol the operating curve's currant point as N28 12. Crass button © channel flag "3 dashes 14 Press bunion Roe ©, channel fag "3" and the numeric arms flash simultaneously. 14. Dial the D disc lo set the parameter value of the operating Clive's current point as 052. 15.
JG Operation and Reconstruction of 6-channel 1X Memory trim setup: Function Description Operation Slog Instruction Nonsupport “Aileron, Elevator, Rudder” three channels trim unsentimental ang gis correct rudder 1. Place TX|n stand by status. 2. Frass bunion A for one second, the whole" NOR REV 7 instruction box and the channel eg "123458" flash loganberry 3. Turn D until "Alert, Elevator, Rudder” channel trim circle flash meanwhile. 4.
JG Wade! Ho Operation and Reconstruction of 6-channel 1X Function ascription Specification from dtp 5. Chang he Modal No landlady by. # Press bunion A+H Tur one second, character MODE" and Model No blink simultaneously. 3 Press button Aor 0, chattier "MODE “lights constantly the Modal Neo blinks. 4. Tue the did plate D to chaos the seeded Model No. 5. runs bunion © io save the current Model No, sang fhe orl fain 10 the value corresponding to the chosen Ode] No, Oo to the model Ripe slug automatically B.
JG Operation and Reconstruction of 6-channel 1X Dual Rate Setup: Function Resorption Operation Steps instruction When choosing high-sate or law rate mode for AIL, ELEGY, THR three channels, you can S86 two valise for the control stick's both sides Playwright ang rundown} separately to meat tha servo trim or operation feeling adjustment. 1. Plage TX in stand by status. 2 Press bunion A for one second the whale "NOR REV" instruction box and the channel flag "123458" flash simultaneously, 3.
JG Wing-mix parameter setup: Operation and Reconstruction of 6-channel 1X Function Description Operation Plebs Instruction Provides three kinds of prenatal w Wing-mix parameters setup and asymmetric value stun of Sightseeing or up/down side of control stick for airplane. 1. Place Thin stat ov status. 2. Press Button A for one second, the whole © NOR REV ani the Chanel fap "1234587 dash together. 3. Tun D oun "NIC and channel identifier #123458" flush together.
JG Operation and Reconstruction of 6-channel 1X Wing-mix setting paramecia range 8 from 100% 10 100% Negative value represents halt contra direction a apposite to the direction of control slick Wing-mix setup changes accessioning to different model type as Frustration below: A mix-conlra block | Theodolite channel Helicopter mix-control block | Rudder channel for ATS Mo of nel copter 1.2, 3 in tho above form represent miss-control type, you can find then in the channel! identifier "123456" In LED.
JG Operation and Reconstruction of 6-channel 1X Function Description Operation Steps instruction umn Oto setup operation curve value as 25. 8. Press Cio save tads and eviler info need search. 9. Press Bloody alter shingling satin The setup of normal PACT curve and 30 curve [8 resilient. Throttle hold switch roust be on when less 30 PITCH Curve.
Operation and Reconstruction of 6-channel 1X Function Ascription Operation Slaps instruction {0 Press button Aor channelize 27 and the asi throe nl the numismatic area flash simultaneous iv 11.Dial the 0 disc to set the parameter vans of the operating curve 's currant point as 035. 12.
JG Operation and Reconstruction of 6-channel 1X Function Description Preparation Steps instruction This function supports the user tn sel sensitivity value of gyro. 1. Place TX In stand by status. 2, Cross button Alar one second, Die whole "HOR REV Instruction hor Lashes, 3. Turn until numeric display centiliter 1" displays "6.5" and flash. 4. Press hor Can the "three figures” wil flash, 5. Press [to acoustic the current sensitivity value, (Press Ao restore to default} 6.
JG Operation and Reconstruction of 6-channel 1X Theodolite hold setup; Friction Description Operation Steps Instruction You can sat throttle had value according in your requirement, ant the vassals percentage of throatily, which ranges from Gio 100%. 1. Stand by 2. Press bunion A for one second, the whale “HOR REY" instruction box dash. 2. Dialectics until ha numeric agog Hashes The numerable are displace “TH” and flashes. 4. Press button Aor, Lhe numeric ara Hashes 5.
Operation and Reconstruction of 6-channel 1X Note: With miniature status, vou can test your transmitter in 8 short distance, which Is to use a relevant short distance to simulate an actual long distance in proportion, Az 2.
Operation and Reconstruction of 6-channel 1X 3D switch safety protection Fungous Description iris to give protection and interacting prompts for user's commiseration, Operation Instruction Hyoulurnon transmitter with 30 switch on. and then | CO will display "44" and flashes. buses sends approval noise. Then you have to pull 30 switch to normal status (pull the stick backward) before using.
Operation and Reconstruction of 6-channel 1X Note: 1. Always push the stick to an trammed position [upper and ls MODE | underneath ls MODE 2), do not leave some obvious space. 2.
Operation and Reconstruction of 6-channel 1X Wire Trainer function Function Description its to Trainer with wire in terrible signal interference status, Operation Instruction The operation is as fo lows: First, turn on the trainee TX, and inherit coach ling, Second, insert another side of coach line Into the trainer TX after the trained one operating normally.
Operation and Reconstruction of 6-channel 1X Biro powering baseline The from is with LED indicator light. Ais Agglutination, *1 AIL represents aileron channel, 2 ELE” represents renovator channel, “3 THR represents throttle channel, "4 HUD" represents rudder channel, *5 CHS” represents sanding gear sensitivity channel, "6 AUX" represents PITCH Map channel “BIND” represents binding/power faucet. The LED indicator light displays the recoverable slats.
SHANGHAI MINE EAGLES ELECTRONIC TECHNOLOGY CO.LTD Factory: Mali Industrial zone. Jia Ding district shanghai. 201801 PR.