X6 Operation and Instruction of 6-channel TX
Warning NE-T007 2.4GHz transmitter is not a toy. To ensure your safety, children under 14 years old are strictly forbidden from operating it. It uses 8 AA NiMH batteries, any other inapplicable batteries are strictly forbidden. If you are not experienced in operating, we suggest you to learn it under the guidance of a well-experienced operator. Manufacturer and distributor are exempted from the responsibility of the product usage. We strongly suggest you to read this instruction carefully before operating.
Catalogue Summarize 1 Wing-mix parameter setup 20 TX technical parameters 1 Operation curve setup 21 TX stand by status 3 Five subsection curve setup of throttle and PITCH channel 22 Airplane Operation Instruction 4 Operation example 23 Model number setup 5 Gyro sensitivity setup 25 Model type setup 6 Memory trim setup 26 User-defined mix setup 6 Throttle hold setup 27 Channel reverse function 7 Flight timer setup 27 Dual Rate setup 8 Other Function Instruction 28 Wing-mi
X6 Operation and Instruction of 6-channel TX Summarize The TX can control helicopter、airplane and glider, and adjust flight parameters. It employs advanced 2.4G DSSS (2.4G direct sequence spread spectrum) communication technology, and having long communication distance, excellent anti-inter ference and error correcting features. Friendly inter face, easy to operate, concise and practical function, the whole external view is illustrated below. TX technical parameters 1. Battery type: AM3 AA 1.
X6 A Enter/ Recover to default adjustment Operation and Instruction of 6-channel TX the button “A” is to enter into menu, and to recover to default in value setup. Return the button “B” is to return to menu. Confirm/Enter into next step the button “C” is to save current setting values and enter into next step. Adjust the button “D” is to choose or adjust values. B C D The TX employs high resolution and subsection LCD screen as user inter face.
X6 Operation and Instruction of 6-channel TX “CURV” represents operation curve of control stick, it will flash when sets it while go solid if the curve is not default in stand by status. The four surrounding indicating bar of LCD displays current trim position when control stick is not pushing (throttle channel generally indicates current channel volume), while displays control volume when control stick is pushing.
X6 Operation and Instruction of 6-channel TX Helicopter General parameter Advanced parameter page Function Channel Reverse Function Dual Rate Set CCPM mix setup General wing-mix (ATS.
X6 Operation and Instruction of 6-channel TX Flap VR(A) Gear speed SW(C) Gear SW(B) Trainer switch SW(E) Flap SW(A) D/R Switch SW(D) Model number setup Function Description It can be changed from 0 to 9. 5 Operation Steps 1、Place TX in stand by status. 2、Press A and B one second together, and “MODE” and model number identifier (“e”) will flash meanwhile. 3、Press A or C, and “MODE” will go solid while model number identifier (“e”) flash. 4、Turn D to choose current model number.
X6 Operation and Instruction of 6-channel TX Model type setup Operation Steps Function Description It offers two options: 1、Place TX in stand by status. Airplane and 2、Press A and B one second together, and “MODE” and Helicopter. model number identifier (“e”) will flash meanwhile. 3、Turn D until “MODE” and model type identifier flash meanwhile. 4、Press A or C, “MODE” will go solid while model type identifier flash. 5、Turn D to choose current model type.
X6 Operation and Instruction of 6-channel TX Operation Steps Function Description 9、Turn D to set user-defined mix value, set left/right or up/down par ts parameter according to corresponding control stick's switchover. (Press A one second if you want to recover it to default.) 10、Press C, “MIXES”, another single channel identifier (“a”or “c”), time display identifier (“f”) will flash meanwhile.
X6 Operation and Instruction of 6-channel TX Dual Rate setup: Function Description Operation Steps When choosing high-rate or lowrate mode for “AIL”, “ELE”, “THR” three channels, you can set two values for the control stick's both sides (left/right and up/down) separately to meet the servo trim or operation feeling adjustment. 1、Place TX in stand by status. 2、Press A one second and channel reversed setting identifier (“d”) will flash.
X6 Operation and Instruction of 6-channel TX △type wing-mix No wing mix pictureA pictureB Function Description Operation Steps 8、 Press A or C, “MIXES”, current mix mode, current mix channel identifier and time display identifier (“f ”) will flash meanwhile. 9、 Turn D to set wing-mix value, use corresponding control stick to change parameter of left/right or up/down par ts. (Press A one second to recover it to default.) 10、Press C to save data and enter into next search.
X6 Operation and Instruction of 6-channel TX Operation curve setup: Operation Steps Instruction 1、Place TX in stand by status. 2、Press A one second and channel reversed setting identifier (“d”) will flash. 3、 Turn D until “CURV” and channel identifier “123456” flash meanwhile. 4、 Press A or C, “CURV” and current channel identifier will flash meanwhile. 5、 Turn D to choose operation curve to set up for each channel.
X6 Operation and Instruction of 6-channel TX operation volume output swing angle of control stick index curve value is -60. Five subsection curve setup of throttle channel Function Description It is to set up operation curve for throttle. 11 Operation Steps 1、Place TX in stand by status. 2、Press A one second and channel reversed setting identifier (“d”) will flash. 3、 Turn D until “CURV” and channel identifier “123456” flash meanwhile.
X6 Operation and Instruction of 6-channel TX Operation example The process of setting operation curve of elevator channel as positive value 25% is as follows: Function Description It is the process of setting operation curve of elevator c h a n n e l a s positive value 25%. Operation Steps 1、Place TX in stand by status. 2、Press A one second and channel reversed setting identifier (“d”) will flash. 3、 Turn D until “CURV” and channel identifier “123456” flash meanwhile.
X6 Operation and Instruction of 6-channel TX Operation Steps Function Description Instruction 8、Turn D to set up current dot value as 002. 9、Press C, “CURV” and channel identifier “2” will flash meanwhile. 10、Press A or C, “CURV”, channel identifier “2” and the last three figures of time display identifier (“f”) will flash meanwhile, while the first figure displays “d”. 11、Turn D to set up current dot value as 028. 12、 Press C, “CURV” and channel identifier “3” will flash meanwhile.
X6 Operation and Instruction of 6-channel TX Memory trim setup: It can suppor t “Aileron, Elevator, Rudder” three channels trim adjustment, and also correct rudder deviation with memory function. Instruction Operation Steps Function Description 1、Place TX in stand by status. 2、 Press A one second and channel reversed setting identifier (“d”) will flash. 3、 Turn D until “Aileron, Elevator, Rudder” channel trim circle flash meanwhile.
X6 Operation and Instruction of 6-channel TX Helicopte Operation Instruction There are several setting parameters for helicopter:Model number, Model type, Channel reserve, Rudder dual rate, CCPM mix, Operation curve, Memory trim, Throttle hold, Flight timer, User-defined mix and so on. Each switch position is illustrated below: Hov.T button Gyro F.mode switch Trainer switch Throttle hold D/R switch Model number Function Description Operation Steps It can be changed 1、Place TX in stand by status.
X6 Operation and Instruction of 6-channel TX Model type Operation Steps Function Description Model type 1、 Place TX in stand by status. 2、 Press A and B one second together, and “MODE” and model number identifier (“e”) will flash meanwhile. 3、 Turn D, “MODE” and model type identifier will flash meanwhile. 4、 Press A or C, “MODE” will go solid while model type identifier flash. 5、Turn D to choose current model type.
X6 Operation and Instruction of 6-channel TX CCPM90° Swashplate drives by two or four servos, while CCPM120° Swashplate drives by three servos. The installation position is illustrated below: Elevator servo Aileron servo CCPM90° Swashplate Elevator servo Aileron servo CCPM120° Swashplate PITCH servo Aileron servo Elevator servo User-defined mix Function Description Operation Steps It provides a group of free mix control modes to meet users' different needs.
X6 Function Description Operation and Instruction of 6-channel TX Operation Steps Instruction 8、 Press A or C, “MIXES”, single channel identifier (“a”or “c”) and time display identifier (“f”) will flash meanwhile. 9、 Turn D to set user-defined mix value, set left/right or up/down par ts parameter according to corresponding control stick's switchover. (Press A one second if you want to recover it to default.
X6 Operation and Instruction of 6-channel TX CCPM Mix setup: Operation Steps Function Description It is to set CCPM120° swashplate mix parameter for helicopter. CCPM90° has no this configuration item for helicopter and airplane. 1、Place TX in stand by status. 2、 Press A one second and channel reversed setting identifier (“d”) will flash. 3、 Turn D until “END-P” and channel identifier “123456” flash meanwhile. 4、 Press A or C, swashplate type and single channel identifier will flash meanwhile.
X6 Function Description Operation and Instruction of 6-channel TX Operation Steps 7、 Turn D to set the rudder value, use D/R switch to choose high-rate mode or low-rate mode, shake the corresponding channel control stick to select rudder value for left, right, upper and under sides. (Press A one second if you want to change Dual Rate Rudder value of left/right or up/down to default.
X6 Operation and Instruction of 6-channel TX Wing-mix setting parameter range is from -100% to 100%. Negative value represents that control direction is opposite to the direction of control stick.
X6 Operation and Instruction of 6-channel TX Index curve value ranges from -80% to 80%. The corresponding relationship between index curve and operation volume output is illustrated below: operation volume output swing angle of control stick index curve value is 0. operation volume output swing angle of control stick index curve value is 60. operation volume output swing angle of control stick index curve value is -60. www.NineEagle.
X6 Operation and Instruction of 6-channel TX Five subsection curve setup of throttle and PITCH channel Operation Steps Function Description It is process of Five subsection cur ve setup for throttle and PITCH channel. Instruction 1、Place TX in stand by status. 2、 Press A one second and channel reversed setting identifier (“d”) will flash. 3、 Turn D until “CURV” and channel identifier “123456” flash meanwhile.
X6 Operation and Instruction of 6-channel TX Operation Steps Function Description Instruction 6、Press A or C, “CURV”, channel identifier “2” and the first three figures of time display identifier (“f”) will flash meanwhile, while the last figure displays “E”. 7、Turn D to set up operation curve value as 25. 8、Press C to save data and enter into next search. 9、Press B to exit after finishing setup. The setup of normal PITCH curve and 3D curve is different.
X6 Operation and Instruction of 6-channel TX Operation Steps Function Description Instruction 10、 Press A or C, “CURV”, channel identifier “2” and the last three figures of time display identifier (“f”) will flash meanwhile, while the first figure displays “d”. 11、Turn D to set up current dot value as 035. 12、Press C, “CURV” and channel identifier “3” will flash meanwhile.
X6 Operation and Instruction of 6-channel TX Operation Steps Function Description T h i s f u n c t i o n 1、Place TX in stand by status. suppor ts the user 2、 Press A one second and channel reversed setting to set sensitivity identifier (“d”) will flash. value of gyro. 3、 Turn D until time display identifier (“f”) displays “G-S” and flash. Instruction Press the Flap/Gyro button to choose Lock Tai/Non-lock Tail type, so as to set the value separately. 4、Press A or C and the “three figures” will flash.
X6 Operation and Instruction of 6-channel TX Throttle hold setup: Operation Steps Function Description You can set throttle hold value according to your requirement, and the value is percentage of throttle, which ranges from 0 to 100%. Instruction 1、Place TX in stand by status. 2、 Press A one second and channel reversed setting identifier (“d”) will flash.
X6 Operation and Instruction of 6-channel TX Other Function Instruction Transmitting power setup: Function Description It is to adjust transmitting power and range test the X6. Operation Steps 1、Place TX in stand by status. 2、 Press A and B one second together, and “MODE” and model number identifier (“e”) will flash meanwhile. 3、 Turn D until time display identifier (“f”) flashes, and the first two figures display “P-”, while the last two figures display current power status.
X6 Operation and Instruction of 6-channel TX Operation instruction for trainer TX: Operation Steps Function Description You have to complete linked allocation between the trainer TX and the trainee one before wireless coach. This function is not for transmitter with old high frequency protocol. 1、Place TX in stand by status. 2、 Press A and B one second together, and “MODE” and model number identifier (“e”) will flash meanwhile. 3、Turn D until the two transmitter identifier in the right of LCD flash.
X6 Operation and Instruction of 6-channel TX 4) When pulling the trainer switch, the two scrollbars of the trainer TX identifier will roll meanwhile, indicating the transmitting data is from the trainee TX, and the scrollbar in the middle of trainee TX star ts rolling. And that means it is the trainee TX operating now. Neither the trainer TX nor the trainee one is permitted to power off in wireless coach, or it will fail to wireless coach.
X6 Operation and Instruction of 6-channel TX Operation Steps Function Description Instruction 4、Press A or C, model number identifier (“e”) and the first two figures of time display identifier (“f”) will flash while the last two figures go solid. 5、Turn D to choose model number. 6、 Press C, model number identifier (“e”) and the last two figures of time display identifier (“f”) will flash while the first two figures go solid. 7、 Turn D to choose model number.
X6 Operation and Instruction of 6-channel TX Binding with receiver: Function Description It is used for establishing communication between transmitter and receiver. It is required to do the binding when you use a receiver for the first time. It's better to keep the transmitter within 0.5 meters away from the receiver to avoid any influences to other transmitters during the binding.
X6 Operation and Instruction of 6-channel TX Communication protocol choice: Function Description The TX is compatible with our other transmitters which are with old communication protocfol. You have to rebind it if the communication protocol is changed before flying. Operation Instruction With TX power off, push the throttle hold switch downwards, press the trainer switch and A together, and then enter into communication protocol choice inter face, LCD displays “R-1” or “R-0” and flash meanwhile.
X6 Operation and Instruction of 6-channel TX Wire Trainner function Function Description It is to Trainner with wire in terrible signal inter ference status. Operation Instruction Make sure that the trainer switch is off before operating, for the two functions can not be used meanwhile. The operation is as follows: First, turn on the trainee TX, and inser t the coach line. Second, inser t another side of coach line into the trainer TX after the trainee one operating normally.
X6 Operation and Instruction of 6-channel TX Reset for the first three model type (illustrated above) Press A, B, C together and turn on transmitter meanwhile, you can reset parameters of the first three model type to default, as follows: First model type: for non-mix airplane Model number 0 Model type non-mix airplane high-rate mode Aileron channel low-rate mode high-rate mode D/R high-rate mode Rudder channel low-rate mode Memory trim 35 right 100% left 80% right 80% left 100% right 100
X6 Gear speed Operation and Instruction of 6-channel TX slow speed 25% fast speed 75% mix-channel A wing mix OFF mix-channel B Main channel user-defined mix left 80% right 80% left 80% right 80% left 60% right 60% left 0% right 0% OFF Sub channel Second model type: for non-aileron helicopter or CCPM90° helicopter Model number 1 Model type non-aileron helicopter or CCPM90 helicopter Swashplate type CPM90° high-rate mode Aileron channel low-rate mode high-rate mode D/R left 1
X6 Operation and Instruction of 6-channel TX the first dot value Throttle curve Operation curve 3D mode Normal mode PITCH curve 3D mode HOV.T the third dot value Decided by HOV.T knob the four th dot value the fifth dot value Decided by HOV.
X6 Operation and Instruction of 6-channel TX Third model type: for CCPM120° mix helicopter Model number 2 Model type Helicopter Swashplate type CCPM120° high-rate mode Aileron channel low-rate mode high-rate mode D/R left 100% right 100% left 80% right 80% left 100% right 100% left 80% right 80% left 100% right 100% left 80% right 80% Elevator channel low-rate mode high-rate mode Rudder channel low-rate mode Aileron channel E0 Elevator channel E0 Rudder channel E0 Nor
X6 Operation and Instruction of 6-channel TX Normal mode Operation curve PITCH curve 3D mode the first dot value 35% the second dot value 45% the third dot value 55% the four th dot value 65% the fifth dot value 75% the first dot value 30% the second dot value 42% the third dot value 55% the four th dot value 65% the fifth dot value 75% Throttle hold Trim Memory trim Gyro sensitivity 0% Aileron channel 0 Elevator channel 0 Throttle curve 0 Rudder channel 0 Aileron channe
X6 Operation and Instruction of 6-channel TX receiver front view front signal line power line base line back The front is with LED indicator light. As illustration, “1 AIL” represents aileron channel, “2 ELE” represents elevator channel, “3 THR” represents throttle channel, “4 RUD” represents rudder channel, “5 CH5” represents landing gear/sensitivity channel, “6 AUX” represents PITCH /flap channel, “BIND” represents binding/power faucet. The LED indicator light displays the receiver status.