User's Manual

ManualsBrandsShanghai Nine Eagles Electronic Technology ManualsCamera & PhotoWIFI Camera

NE-OT017 WIFI CAMERA Users Manual

1.WIFI camera’s specifications and parameters：

Memory: Accepts up to 32G Micro SD card

Camera Size: 91.5mm L x 39.4mm W x 38.5mm H

Codec Video: Motion FHD 1080P, JPG, file extension .mp4

Codec Audio: Mono

Still Image Capture: 1920 x 1080, file extension .jpg

WIFI Control Distance: About 80 meters @2.4G (No Interference and No obstacles)

About 100 meters @5.8G (No Interference and No obstacles)

2.Install Wifi Camera：

For RTF version, the Wifi camera is already installed. Please follow the below instructions to replace or repair Wifi camera.

1) Connect the Wifi camera cable to camera slot in quadcopter.

2) Use the double side tape to stick the Wifi camera to the bottom of quadcopter.

3) Plug Micro SD card into card slot of the camera according to the SD card mark on camera.

4) Change the len’s angle if necessary.

3.indicator lights status instruction：

Camera indicator light Status

blue light solid on Successful connection with mobile devices. Camera working under 2.4G.

orange light solid on Successful connection with mobile devices. Camera working under 5G.

4.Download and Install APP：

1)Download and install APP:

Attention: Please check the latest APP version on www.nineeagle.com or you may update the APP inside About page.

Optional ways to download

●Use your mobile devices (Android operating system) to visit : http://www.nineeagle.com/product/product_download.aspx?id=49

●Visit Apple Store or Google Play by searching “nineeagle” to download.

●Scan two-dimension code.

After download APP, please install it.

2)Find APP manual:

Please find the manual in “manual” section of User Center or visit www.nineeagle.com

3)Teaching Video

Please find the “video” section of User Center or visit www.nineeagle.com

Summary of content (4 pages)

PAGE 1
NE-OT017 WIFI CAMERA Users Manual 1.WIFI camera’s specifications and parameters： Memory: Accepts up to 32G Micro SD card Camera Size: 91.5mm L x 39.4mm W x 38.5mm H Codec Video: Motion FHD 1080P, JPG, file extension .mp4 Codec Audio: Mono Still Image Capture: 1920 x 1080, file extension .jpg WIFI Control Distance: About 80 meters @2.4G (No Interference and No obstacles) About 100 meters @5.8G (No Interference and No obstacles) 2.Install Wifi Camera： For RTF version, the Wifi camera is already installed.
PAGE 2
NE-OT017 WIFI CAMERA Users Manual 5.Connect Wifi camera to mobile devices Attention: It is suggested to have your mobile devices set as No-disturbing mode before flight as the application of APP will be severely affected by coming in phone calls. 1)Follow the instruction manual to power on the transmitter and connect Li-po battery to quadcopter.
PAGE 3
NE-OT017 WIFI CAMERA Users Manual to stop video shooting. Attention: Before removing the li-po battery, please make sure to stop the video shooting to save video. Otherwise, the video can not be saved. 7.Photo Shooting There are two ways for photo shooting. ● By transmitter - Under above video shooting mode, press the button “VIDEO /PICTURE ON” one time on the top right corner of transmitter backside, WIFI camera will take one picture. ● By APP - Click 12 Photo taking to take one photo.
PAGE 4
NE-OT017 WIFI CAMERA Users Manual FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.