Wireless MIDI Interface User’s Manual ————————————————— Model:WIDI-X8 Read “Precautions” on page 5 before use Please ready this manual carefully before use. Please keep this manual for reference.
Thank you for choosing CME WIDI-X8 wireless MIDI interface. Please keep all the important information here. Attach your invoice or receipt here ~~~~~~~~~~~~~~~~~~~~~~~ for reference Serial(on the back of the product) Purchase date Dealer’s name and addr. Dealer’s tel. Warning: Improper connection may cause damage to the device. Copyright Copyright of the manual belongs to Central Music Co. Anyone must get a written permission from Central Music Co.
Special Message Section This product utilizes batteries or an external power supply (adapter). Do NOT connect this product to any power supply or adapter other than the one described in the manual, on the product, or specifically recommended by CME. user safe and environment friendly. We sincerely believe that our products and the production methods used to produce them, meet these goals.
FCC WARNNING! (U.S.A) THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements.
PRECAUTIONS IMPORTANT Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, damages, fire or other hazards. These precautions include, but are not limited to, the follows: 1、 Read and understand all the instructions. 2、 Always follow the instructions on the instrument. 3、 Before cleaning the instrument, always remove the electric plug from the outlet as well as the USB cable. When cleaning, use a soft and dry cloth.
17、 Observe ‘Turn off the RF communication device such as Mobile Phone’ signs, such as those near stores of fuel, chemicals or explosives 18、 The operation of some medical electronic devices, such as hearing aids and pacemakers, may be affected if a WIDI-X8 is used next to them. Observe any warning signs and manufacturer's recommendations. 19、 Please do not use your WIDI-X8 near any precision instrument, which may cause noise or abnormal operation to the instrument.
99/519/EC Council Recommendation on the limitation of exposure to the general public to electromagnetic fields 0 Hz-300 GHz, Official Journal of the European Communities, July 12,1999. ANSI/IEEE C95.1-1992. “Safety levels with respect to human exposure to radio frequency electromagnetic fields, 3kHz to 300 GHz”. The Institute of Electrical and Electronics Engineers Inc., New York, 1991. FCC Report and Order, ET Docket 93-62, FCC 96-326, Federal Communications Commission (FCC), August 1996.
This page was intentionally left blank.
Content 1 2 3 4 5 6 Features .................................................................................................................... 10 System requirement................................................................................................... 11 Operation ................................................................................................................... 11 3.1 Power supply ............................................................................................
1 Features Professional WIDI products with all the function. The working band is 2.4GHz ISM. Bi-directional MIDI data transfer. 64 radio channels for MIDI data transfer, with manual or automatic radio channel setting mode. Manual switching for one-to-multi communication (auto finding and selecting). MIDI ports and USB port for various data route including USB USB RF, MIDI RF and MIDI.
2 System requirement MIDI device with MIDI ports GM compatible sound card or other tone generator Computer with 366MHz or faster with available MIDI ports or USB port Win ME/XP or Mac OS X Cakewalk or other music software The less obstacles, the better performance Avoid using blue teeth or other RF device to minimize interference 3 Operation ① ② ③ ④ ⑦ ⑧ ON DIP Pos.1 Pos.
5V DC IN ⑤ Indicator The indicator has two colors, red for power indicator and green for signal indicator. ⑥ Frequency set button Press the button shortly for one-to-multi function (finding and switching). Press and hold the button for about three seconds for automatic radio channel setting in the automatic frequency-setting mode, or for returning to the original frequency in the manual frequency-setting mode. ⑦ Route mode selector The route mode can be set to 1/2/3.
same time. The default system radio channel is already set. If necessary, you can set the radio channel again (you need to remove the battery cover). You can set the frequency automatically or manually, plus, you can also use the one-to-multi function (automatically finding and switching).
WIDI-X8s in the pair are in the automatic frequency setting mode. One-to-multi communication (auto finding and switching) The one-to-multi function is also regards as the auto finding and switching function. When you have two WIDI-X8s in different radio channels, you can use this function to find another one and establish communication conveniently.
3.3 Connection and routing The WIDI-X8 can send or receive MIDI data via the MIDI IN, MIDI OUT or USB port; plus the RF(radio frequency) , so you can route the MIDI data among MIDI ports, USB and RF to meet your need. There are three major route modes, those are MIDI RF, USB RF and USB MIDI, controlled by the route selector. Note: In the below fig, a) and b) means the data route. To make things clear, the 注: WIDI-X8 1 is fixed to route mode 1.
Explanation: The WIDI-X8 1 is set to route mode 1(MIDI RF), and the WIDI-X8 2 is set to route mode 3(USB MIDI). In this way, the WIDI-X8 2 works as a USB-MIDI interface. For the route a), please set the MIDI IN device to “USB Audio Device”, and the computer receives the MIDI data from MIDI IN. For the route b), please set the MIDI OUT device to “USB Audio Device”, and the computer sends the MIDI data to MIDI OUT of the WIDI-X8 2. The MIDI OUT data from WIDI X8 2 will also be send via RF to WIDI-X8 1. 3.
original channel, the WIDI-X8 will automatically establish communication. The green indicator will be on to show a successful communication establishing. Automatic communication establishing during frequency setting mode changes When the frequency setting mode changes from automatic to manual, the WIDI-X8 will automatically establish communication; when the frequency setting mode changes from manual to automatic, the WIDI-X8 will automatically search for available radio channel and establish communication.
cable. In the manual frequency setting mode, please make sure each pair of the WIDI-X8 use the same radio channel, and different pairs use different radio channel for proper data communication. Reduce the obstacle and interference as much as possible. If the signal indicator blinks, it means there is interference. If the signal indicator blinks fast or off, it means strong interference and the communicator stops. The signal indicators on both WIDI-X8s are on, which means proper communication.
23 0 1 0 1 1 0 44 1 0 1 0 1 1 24 0 1 0 1 1 1 45 1 0 1 1 0 0 25 0 1 1 0 0 0 46 1 0 1 1 0 1 26 0 1 1 0 0 1 47 1 0 1 1 1 0 27 0 1 1 0 1 0 48 1 0 1 1 1 1 28 0 1 1 0 1 1 49 1 1 0 0 0 0 29 0 1 1 1 0 0 50 1 1 0 0 0 1 30 0 1 1 1 0 1 51 1 1 0 0 1 0 31 0 1 1 1 1 0 52 1 1 0 0 1 1 32 0 1 1 1 1 1 53 1 1 0 1 0 0 33 1 0 0 0 0 0 54 1 1 0 1 0 1 34 1 0 0 0 0 1 55 1
06-Sep Central Music Co. Tel: +86-10-8580 1115 Fax:+86-10-8580 1114 Web: www.cme-pro.com E-mail for support: support@cme-pro.