TSPM0424123 Product Datasheet TSPM0424123 Product Datasheet ⚫ Revision: B ⚫ Date: 2019-06-05 ⚫ Document Number: MS-RD60-GEN-04-A_EN Revision History Revision Date Description A 2018-12-19 Initial release; B 2019-06-05 Add FCC information; MS-RD60-GEN-04-A_EN Page 1/11
TSPM0424123 Product Datasheet Table of Contents 1 Introduction ........................................................................................................................... 3 1.1 Main Features............................................................................................................... 3 1.2 Main Parameters .......................................................................................................... 3 2 Hardware ..................................................
TSPM0424123 Product Datasheet 1 Introduction TSPM0424123 is a passthrough module based on Bluetooth Low Energy (BLE). It can transmit and receive data through BLE. It has a plenty of peripheral interface. It can be widely used in the field of Internet of Things. 1.1 Main Features ⚫ BLE Core v4.2; ⚫ Support LE Dual Mode Topology; ⚫ Antenna Type: PCB Antenna; ⚫ Antenna Gain: 1.
TSPM0424123 Product Datasheet 2 Hardware 2.1 Package and Pins The package and pin definitions are shown as Figure 2.1 and Table 2.1. Figure 2.1: The package of module Pin No. Name Type Description 1, 8 GND P Ground; 2 GPIO8 I/O GPIO; 3 GPIO7 I/O GPIO; 4 ADC_1 I 10-bit ADC input; 5 ADC_0 I 10-bit ADC input; 6, 7 VCC P Power, 1.9~3.6V, recommend 3.
TSPM0424123 10 PWM1 O PWM output; 11 PWM2 O PWM output; 12 PWM3 O PWM output; 13, 14 NC - - 15 SCL O I2C clock; 16 SDA I/O I2C data; 17 GPIO0 I/O GPIO; 18 GPIO15 I/O GPIO; 19 SWDIO I/O SWD data; 20 SWCLK O SWD clock; 21 RXD I UART RX; 22 TXD O UART TX; 23 RST I Reset, active low. Product Datasheet Table 2.1: The pin definitions of module 2.2 Circuit Schematic The circuit schematic of module is shown as Figure 2.2.
TSPM0424123 Product Datasheet Figure 2.
TSPM0424123 Product Datasheet 2.3 Precautions Hardware Design ⚫ Input power is recommended to use magnetic beads for filtering; ⚫ Copper plating, trace and component mounting are not allowed directly above/below the PCB antenna, otherwise it will affect the RF performance. It is recommended to use the Keep Out Layer to knock out this area; ⚫ Other components should be mounted away from the antenna to reduce the impact of object occlusion on RF performance.
TSPM0424123 Product Datasheet 3 Electrical Parameters 3.1 Limiting values Parameter Description Min. Max. Unit Supply voltage -0.3 +3.9 V Storage temperature -40 +125 ℃ Table 3.1: Limiting values 3.2 Operation Range Parameter Condition Min. Typ. Max. Unit Supply voltage 1.9 3.0 3.6 V Operation temperature -40 +25 +85 ℃ Table 3.2: Operation Range 3.3 Current Consumption Ambient temperature: 25℃, supply voltage: 3.0V. Parameter Condition Min. Typ. Max.
TSPM0424123 Product Datasheet 3.4 RF parameters Ambient temperature: 25℃, supply voltage: 3.0V, center frequency 2440MHz Parameter Condition Min. Typ. Max. Unit RF frequency 2400 - 2483.5 MHz Output power - 0 - dBm RX sensitivity - -93.5 - dBm Table 3.
TSPM0424123 Product Datasheet 4 FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device complies with Part 15, Part 15.247 of the FCC Rules. The FCC ID for this device is 2AS3M-TSPM0424123.
TSPM0424123 - Product Datasheet Consult the dealer or an experienced radio/TV technician for help. WARNING: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. The device must not be co-located or operating in conjunction with any other antenna or transmitter.
