WM320 User Guide for Windows 2012/3
Contents Introduction .......................................................................................................................................... 1 Before using the terminal ................................................................................................................ 1 Supported OS (Personal Computers) .............................................................................................. 1 Safety Notes ................................................................
Introduction Thank you for purchasing the WM320. Please always read this user guide before using the product. Before using the terminal ・ It is not available, at the place that out of reach of radio waves such as in tunnels, underground, building and weak point, out of service. And you may not be available even in the high floor vantage point, such as high-rise apartment buildings. ・ Public places, a quiet place and where there is a lot of people, please use so as not to disturb the people around.
Safety Notes Before using this product, please read the "Safety Notes" and use this product in the correct manner. The dangers or damage that can occur if the following precautions are not strictly adhered to or this product is not used in the correct manner are described below. Danger Warning Caution This sign denotes that death or serious injury may directly result from improper use. This sign denotes that death or serious injury may result from improper use.
Danger Please do not use or leave the device in a place where it will be exposed to high temperatures, such as near a fire or heater, in strong, direct sunlight, or inside a car on a hot day. This may cause the device change shape or malfunction or overheat, catch fire. It may also cause the device to become hot, resulting in a burn injury. Please do not use near the vicinity of high-precision electronic devices.
Warning Please do not subject the device to strong shocks or throw it. It may cause malfunction of device, a fire, injury of yourself or others. Please do not contact the conductive foreign object into the USB connector or not insert foreign object into crack. This may cause overheat, a fire, electric shock or malfunction. Please do not use the device at gasoline stations or other locations where it may cause a fire or explosion. This may cause explosion, or catch fire.
Caution Do not place the device on sloped or unstable surface. The device may fall off, causing an injury, or malfunction of the device. Do not use more excessive force than necessary. This may cause injury or malfunction. Itching, rash, eczema, or other condition may occur depending on the customer's health or physical disposition. If an abnormality occurs, immediately stop using, please receive medical attention. If the impact on electronic devices of the vehicle, please do not use.
Use of the device around electrical devices for medical care Details noted here are based on the "Guidelines on the use of mobile phones and other device to prevent adverse effect or radio waves on electrical devices for medical care (Electromagnetic Compatibility Conference JAPAN). Warning Please adhere to the following rules inside medical facilities. ・Do not bring this device into operating rooms, intensive care units(ICU),or coronary Do care units(CCU). ・Turn OFF PC in hospital wards.
Request concerning handling Common ・ Please use a soft, dry cloth when cleaning the units. If you use alcohol, thinner, benzine or other cleaning agent, the printing may disappear and the colors may fade. ・ Use a dry cotton swab to occasionally clean the electrode terminals. If the terminals become dirty, contact becomes poor and power may be cut. If the terminals become, please wipe them clean with a dry cloth or cotton pad. ・ Do not place the units near the air outlet section of an air-conditioner.
Caution Please do not use WM320 altered absolutely. If used it, it is a violation of the Radio Act. This product complies with Japanese technical regulations regarding exposure to radio waves. Its proof has been displayed in the label of its name plate. If you remove its screw for modification, such proof will be disabled. If its proof will be disabled, it is a violation of the Radio Act.
1. Part names and function ➊ ➍ ➋ ➎ ➌ ➊ LED status lamp ➍ Memory card slot Display the current state For inserting a memory card ※Not available part ➌ Cover ➎ USIM card slot To protect the USIM card For inserting a USIM card. ➌ USB connector Connection terminal for PC 1.
2. Preparing USIM card USIM card is an IC card customer information such as telephone numbers are recorded. In order to use this product, please attach to this product USIM card. Not to insert USIM card, you will not be able to take advantage of data communication, etc. 2.1 Attaching 1. Remove the cover. 2. Facing down the terminal portion of gold in the USIM card slot, insert the direction of the arrow. 3. Attach the cover. 2.2 Removing 1. Remove the cover. 2. Remove the USIM card from USIM card slot. 3.
3. Setup for Windows For the first time, connect to a PC product , the installer will automatically launch and installation of a (WM320 Data Connection Manager) utility software for data communications. 3.1 Installing WM320 Data Connection Manager 1. Turn on your PC, start the OS. 2. Connect the USB port on your PC this product. WM320 Data Connection Manager setup screen for installation by the zero function, to connect the product will be displayed automatically. 3.
5. Confirm the "license agreement", click [Agree]. 6. Select the installation location, click [Install]. 7. The installation is complete and the following screen is displayed. Click [Finish]. WM320 Data Connection Manager launch automatically.
3.2 Confirm WM320 Data Connection Manager Make sure that is installed on the PC WM320 Data Connection Manager. 1. Select [Start] - [Control panel] - [System and Security] *Windows Vista Select [Start] - [Control panel] - [System and Maintenance] *Windows XP Select [Start] - [Control panel] - [Performance and Maintenance] - [System] 2. Click [Device Manager]. *Windows Vista Click [Device Manager] - [Continue]. *Windows XP Click [Hardware] tab - [Device Manage] 3.
3.3 Uninstalling WM320 Data Connection Manager 1. Select [Start] - [Control panel] - [Program] - [Uninstalling programs]. *Windows XP Select [Start] - [Control panel] - [Add or Remove Programs]. 2. Select [WM320 Data Connection Manager] - [Uninstall and delete]. *Windows XP Select [WM320 Data Connection Manager] - [Modification and delete]. 3. Click [Next]. 4. Click [Uninstall].
5. Click [Finish].
4. Utility Software for Windows This product WM320 Data Connection Manager utility for data communication software will be installed. Data communication will be available on Windows using this software. 4.1 WM320 Data Connection Manager configuration ➊ ➋ ➌ ➍ ➎ ➏ ➏ ➊ Connection ➍ Information of Connection To open the main. While connecting, displays the following information.
4.1.1 Status display area Information Status Signal strength Out of range Weak ← → Strong W-CDMA※2 / HSDPA/HSUPA※3 GPRS※4 Connection interface to HSDPA/HSUPA※5 Internet GPRS Operator Display name of operator.（Displayed only while connecting.） Operator-specific number Display the network information (PLMN). PLMN is the operator-specific number. PLMN indicates MCC(Mobile Country Code） and Network Code） Display "DOCOMO (44010)" in DOCOMO area.
4.2 Launch WM320 Data Connection Manager 1. When connecting to PC, launch automatically. 4.3 Close WM320 Data Connection Manager 1. Click "×" at the top of the main screen.
4.4 Connection Settings 1. Click . 2. Select [Settings] - [Connection settings]. 4.4.1 Profile Settings Sets the profile to take advantage of data communication. If the settings of the profile is not, data communication is not available. 1. Select [Connection settings] - [Profile settings]. 2. Click [New]. 3. Enter the profile information. ➊ ➋ ➌ ➍ ➎ ➏ ➐ ➊ Profile name ➎ Authentication method Enter profile name. Choose from two types of "PAP" "CHAP".
4. Click [OK]. 5. Select the profile that created and click [Connection destination settings]. 4.4.2 Advanced When use RAS(Modem), it is available to set manually IP address, DNS server addresses, WINS server addresses. Please follow the steps below. The default setting is "automatically". 1. Click [Advanced]. 2. Input IP address, DNS server addresses, WINS server addresses 4.4.3 Connection method It is available to use RAS(using dial-up modem) or NDIS(via network adapter).
4.5 Connect/Disconnect 1. Insert the USB port of PC the device. 2. WM320 Data Connection Manager launch automatically. 3. Create the profile for connecting to the network. 4. Click [Connect]. 5. While connecting, "Connect" is replaced by "Disconnect" and display "Connection Time", "Amount of data sent and received". 6. Click [Disconnect]. 7. Terminated connecting, "Disconnect" is replaced by "Connect".
4.6 PIN Management It is available to set "Enabled PIN", "Disabled PIN", “Modify PIN". PIN is a code of 4 to 8 digits in order to prevent unauthorized use by third parties. If set to "Enable PIN1", need to enter a PIN code when connecting to PC. For the default settings, please contact customer center. 4.6.1 Enabled PIN 1. Select [Enable PIN/Disable PIN]. 2. Select [Enable PIN]. 3. Input the correct PIN, PIN1 authentication is enabled. 4.6.2 Disabled PIN 1. Select [Enable PIN/Disable PIN]. 2.
4.6.3 Modify PIN 1. Select [Modify PIN]. 2. Input the original PIN. 3. Input new PIN. 4. Re-input for confirmation. 5. Click [OK].
4.7 Network Settings The default setting is "Auto". Search automatically, and then connect the network. If you select "manual", please follow the steps below. 4.7.1 Network Mode 1. Select [Network Mode]. 2. Select [Manual]. 3. Click [Search]. After searching, the network found is displayed. 4. Select the network. 5. Click [Select]. 4.7.2 3G/GPRS Settings When search for a network, is able to specify the network preferentially. 1. Select [3G/GPRS Settings]. 2.
5. Appendix 5.1 Product Specifications Product Name WM320 External Dimensions 88.5mm(D) × 30.5mm(W) × 12.9mm(H) Weight Approximately 30g Interface USB 2.
5.2 Export Administration Regulations This product and its accessories may be under coverage of the Export Administration Regulations of Japan ("Foreign Exchange and Foreign Trade Control Laws" and the related laws and regulations). And, they are also under coverage of Export Administration Regulations of the U.S. When exporting and reexporting this product and its accessories, take necessary procedures on your responsibility and expense.
5.5 RF Exposure Information(SAR) This device meets the government‟s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg.
5.6 Declaration of Conformity Model: WM320 Intended use: LTE USB Modem Complies with the essential requirements of Article 3 of the R&TTE 1999/5/EC Directive, if used for its intended use and that the following standards have been applied: 1. Health (Article 3.1(a) of the R&TTE Directive) EN 62311 :2008/EN 62209-2:2010 2. Safety (Article 3.1(a) of the R&TTE Directive) Applied Standard(s): EN 60950-1:2006+A11:2009 3. Electromagnetic compatibility (Article 3.
28
