User’s Manual for Totem
Introduction to Manual This manual provides operation guideline information for you. Please refer to Guideline for Quick Use if necessary to grasp the basic functions fast. Introduction to Operation Procedures The following ways are used in the User’s Manual in order to search the functional menu: Operation path: Main menu > Messages. The case indicates: click the[Central Key] from standby menu, the phone displays the main menu and click the message functional menu.
Table of Contents Comprehend Your Phone................................................................................... 4 Front View............................................................................................... 4 Side View ................................................................................................ 5 Back View ............................................................................................... 6 Begin to Use..................................................
Function Menu..................................................................................................35 SAT........................................................................................................ 35 Browser ................................................................................................. 36 Entertainment ........................................................................................ 41 Camera..................................................................
Comprehend Your Phone Front View Central Key Navigation Key LSK Go to browser Go to home Call Key RSK Go to SMS Delete Key On/Off Key Numeric Key Special Function Key 4
Side View USB socket Volume-adjusting key Snap Key 5
Back View Loudspeaker Camera Battery Cover Important notes: you can only use the touch pen which is applicable for this kind of device. Using other touch pen may violate the maintenance clause of the device and even damage the touch screen. You should avoid to scraping the touch screen. Please do not write with commonly-used pen, pencil or other sharp instruments on the touch screen.
Begin to Use (U)SIM Card and Battery When you reserve to access to the communication network services, you will receive a phone-inserted subscriber identity module (abbreviated as (U)SIM card), which contains the information of the network services booked by you, your personal identity number (PIN) and the available network service info. Please consult with your SIM card provider, network service provider or network operator to obtain and use SIM-based information.
Recharge Battery When the battery capacity is low, the phone will send out the low power information and the flickering icon of empty battery appears as well. Under this case, you are supposed not to use some functions of the phone. When the power is lower than the threshold value, the phone will be power off automatically. Please recharge the battery. When the phone is power-on and being charged, the flickering battey icon is displayed on the top-right corner of the screen.
standby menu while leaving the factory, and the screen will display your recently standby menu if you use at the second time. 4. If desired to set up the phone, please consult for more details. After the phone is launched, it will identify the (U)SIM card supplier automatically, and finish setting up the SMS and wireless network parameters.
Display Screen Display Screen Status Indication Standby Message Wallpaper Shortcut Key LSK Function Indication RSK Function Indication Central Key Function Indication z z z z z Status Indication: signal status, battery status, message status, incoming call status, user’s profile status, function launch status and insert status of external device etc. Standby Message: name of operator, date, week message, time, Am.& Pm. prompt (12 hours). Wallpaper: background image under standby status.
Keys and Touch Screen Keys Central Key Enter into main function menu or confirm selected entries. Navigation Key Move the selected frame amid menus of every level and entries. Left soft key go to contacts Right soft key go to SAT go to home go to browser go to SMS Call key Launch call. End key After ending the call, power on/off or return to the standby status. Clear key Delete entries or clear away input. “1” key Press and hold to dial voice mailbox service.
View and Setting z If you are desired to view the content list or option details, you can click to select the entry under the current screen display, and the screen will display the details of the entry. For example: Main menu > Contacts, click the contact you are desired to view and the screen will display the details of the contact. Click the entry to enter into the editing status of the option and you can modify the entry as well.
> New. 2. You can click the icon on the top right corner or blank area of the screen to display the Mini-keyboard. Click the icon on the Mini-keyboard to input your required number, special symbol, space etc. click “Option” to switch input method. Select letter with handwriting pen and match input method to get the expected input letter. You can input it to the editing window by clicking it. 3. If you do not want to use Mini-keyboard, you can click the icon , the Mini-keyboard will retract.
The T9 input method distinguishes the most frequently used characters under each key sequence with the uses built-in dictionary. Thereby, no matter where is the position of the key corresponding to the letter you are eager for, you just click the key corresponding to the letter once. 7. Locate at the character input status, for example, Main menu > Messages> Text message > New. 8. Providing that you are desired to input a word of “Phone”, you can click , , , , in sequence. 9.
Calendar Menu Catalog Profile Browser Entertainment Camera Messages Contacts Tools Multimedia My stuff Calendar Call Log Call log Settings Go to homepage Enter URL Bookmark History Push message box Saved pages Browser settings Network settings SMS MMS Email All/Phone/USIM card Group Alarm Calculator Recorder World time Media player Radio Images Video Sounds Others Missed calls 15
Settings Outgoing calls Incoming calls All Calls Data Transmission Call duration Call cost Display Settings Phone Settings Call Settings Network Settings Security Settings Connection Settings Reset Settings Set up Your Phone Set up your phone personally, including display Settings, ringtone Setting, language Setting, time and date Setting, shortcut Setting and phone lock Setting.
Adjusting Backlight time Operation path: Main menu> Settings > Display Settings > Backlight time. Select screen light to maintain the working time without operation, click “Ok” to save the Settings. Adjusting the Brightness of Screen Display Operation path: Main menu> Settings > Display Settings > Brightness. Select the brightness of display screen, click “Save” to save the Settings. Ringtone Settings Select Profile and Rigntone Operation path: Main menu> Settings > Profile.
Set up Shortcut Key Operation path: Main menu > Settings > Phone Settings > Shortcuts > Shortcut settings. Select the shortcut key you required to set up, click[Central Key]to activate the waiting function menu of shortcut key, and then select shortcut key function and click “OK”. You can save all shortcut settings after finished all shortcut key settings. Display Shortcut Key Operation path: Main menu > Settings > Phone Settings > Shortcuts > Shortcut display.
Guideline for Quick Use Call Function After launching the phone, if it locates inside the network, the phone will select automatically to connect the main network. If it is not inside the network, the phone can use other network upon permited by network operator, and called as Roaming. When the mark of network supplier comes forth on the display screen, you can dial or answer the phone.
will pop up the dummy keyboard at once. You can input the phone number with physical keyboard or dummy keyboard. 2. Click the[Call Key]or[Central Key]to launch the calling. 3. If desired to end the call or cancel the call, please click[On/Off Key]. When you are desired to dial the international call, you can click the icon continuously for many times, input + to replace the international connecting number, and then input national code, regional code and phone number.
2. Select shortcut key, click “Set” to input the corresponding number of shortcut key or click “Search” to select the number of contacts in the Contacts. 3. Click “OK” to save the settings. 4. Press and hold the corresponding shortcut keys under the standby status to launch the call. Fixed Dial Set up the number which is allowed to launch the call. 1. Operation path: Main menu > Contacts > Settings > Fixed dial 2. Click “Option” to select “New Contacts”. 3.
The phone supports to dial the international number, for example: 112 and 911 etc. when the phone locates at network coverage of WCDMA or GSM, whether you insert the (U)SIM card or not, you can dial out the emergency call in any countries and regions. You just require inputting the emergency number, click[Call Key]or[Central Key] to launch the call. Some countries or regions may set up other emergency numbers.
incoming call fails to be received. 2. Click “View” to view the record of missed calls, you can dial to call the missed call number by clicking[Call Key]or[Central Key]. 3. Through call log to view the missed calls information, please use the operation path: Main menu > Call log > Missed calls. 4. You can dial to call the missed call number by clicking[Call Key]or [Central Key]. Transfer to receive the Incoming Call 1. Operation path: Mian menu > Settings > Call settings > Call divert 2.
prompt. The function requires the supports from network, please consult the network service supplier. Multi-calls This function requires the supports from network, please preset the network service. For relevant information, please consult the network service provider. Call during Calling 1. During calling, click “Option” to select “New call”, input the number of new contact and make a call, or input the number of contact directly and click[Call Key]to make a new call. 2.
“Hangup”. The extra frees will be charged if you dial in multi-calls. For more details please contact network service supplier. Message Function The phone supports many kinds of message services. You can book or consult the service supplier for the service which can be used by you. Text message The Text message may contain simple text message.
report allowed, delivery report, read report, admit anonymity, fetch mode, delivery size limit, reception size limit and profile settings. Email The network support is needed to receive, view or edit and send E-mail with the phone. Please firstly reserve the E-mail service. You can add file in types such as pictures, photos, audios and videos and so on in the E-mail. If desired to set the E-mail-related parameters, please use the path: Main menu > Messages > Email > Settings.
/Multimedia/Email > New. 2. Input the message contents under the editing window. 3. After finished editing, you can click “Option” to select “Send” and input the number of addressee. You can select “Edit number/Contacts/Recent receiver” to input the address when you send the mail. You can shortly press the “Edit number” to input the numbers and press and hold to input the letters. 4. If desired to send to many contacts, you just move the message to the related entries and input other phone numbers. 5.
1. Operation path: Main menu > Contacts. 2. Search a contact and phone number by the alphabetic sequence. 3. If desired to search the message entries by the group, you can click [Right Navigation Key]to open group folder. Select group type, click [Central Key]to open the contact’s list under the group, and then search the sequence. 4. If desired to search the contacts quickly, please input several previous letters of the name. Edit My business card Edit v-Card 1. Operation path: Main menu > Contacts. 2.
Album”, and then click[Central Key]to open the pictures. 6. If you want to quit out the camera function, you can click “Back” to back to the function menu. Image Pick-up Function Image Pick-up 1. Operation path: Main menu > Camera. 2. Click “Option” to select “To camcorder” and open the camera window. 3. Click the icon or[Central Key]to start the video. 4. You can click[Central Key]to pause the video under the video status , and click[Central Key]again to continue the video. 5.
My stuff. 4. Select the media folder/file which you required playing, click[Central Key]to finish the adding of play list. Play Media File Play Media File 1. Operation path: Main menu > Multimedia > Media player 2. Under the status of media player, you can click key to play in order when the play list is not empty. 3. You can play previous or next file in the play list under the status of media player playing. key to pause the play under the status of media 4.
2. Select a folder including: images, sounds, videos, applications and others. You can click[Central Key]to open the folder list under this folder. 3. After select and open the folder, you can click[Central Key]to inquire about the file list. 4. If desired to view the storage status of the folder, please use the path under the status of type folder: Option > Memory status. Create Folder 1. Operation path: Main menu > My stuff. 2. Select a folder including: images, sounds, videos, applications and others.
1. Use path: Main menu > Settings > Connection Settings > Data account. 2. Click “Option” to select “New”. 3. Input account name, APN, authentification type, user name and password, click “Save” to save the account settings. Network Settings 1. Use path: Main menu > Browser > Network settings 2. Open network settings list to select setting entries. 3. Click “Ok” to save the settings. Browse Internet Browse 1. Use path: Main menu > Browser. 2.
to your phone or PC. In order to secure the phone, please: close the Bluetooth function at ordinary time; be vigilant against receiving undiscerned Bluetooth files or MMS; do not install the undiscerned equipment program; and download the ringtone or games from the reliable websites. Bluetooth & Wireless Link You can link to other compatible devices wirelessly with the Bluetooth & wireless technology. The compatible devices include possibly the handsets, PC, and earphones and so on.
8. If the input password is matched to that of the Bluetooth device to be linked, the phone will link to the Bluetooth device. Transmit Data via Bluetooth 1. Open an application program storing the files, for example, opens My stuff if desired to send pictures to an object device, select the file you required to send. 2. Click “Option” to select “Send” and select “Via Bluetooth”. 3. The phone will display the device list, you can click Bluetooth device which required to be connected. 4.
USB Connection 1. Main menu > Settings > Connection settings > USB. 2. Select connection type including USB. USB You can communicate with the PC or internet in different application procedures synchronously by USB transmission line or internet service. Use the phone operation path: Main menu > Settings > Connection settings > USB >USB.
the SAT function and provide the additional service of (U)SIM card. Your service provider will provide different additional services, for example, entertainment, mobile chat and weather etc. If desired to enter SAT menu, please Press[RSK]under the standby. Browser The wireless application protocol (WAP) browser supports you connect with the wireless network. You can view the latest information and download abundant media contents with the network browser, such as wallpaper, ringtone and music.
following procedures: 1. Insert SIM/USIM card. 2. Located inside of a service area of wireless network, which supports the network function. 3. Set a data account. 4. Set network configuration. Browse Webpage Go to homepage The default homepage is the network operator’s homepage. You can link to the homepage URL with the main menu. 1. Operation path: Main menu > Browser> Go to homepage. 2. Select webpage linkage, click “Back” and quit out the current page. 3.
You can set the current webpage as a bookmark or create a bookmark through the functional menu when you are browsing a webpage. 1. Under the webpage-browsing status, via path: Option> Tool> Mark page. 2. Create a bookmark with functional menu, via path: Main menu> Browser>Bookmark. 3. You can click “New” when there is no bookmark. If there has bookmark, you can click “Option” to select “New”. 4. Input bookmark name and URL and click the “Save” to save the bookmark. Open Bookmark 1.
Option Menu of Browsing Log: z Delete: delete a current browsing log. z Delete All: clear away all the browsing logs. z Show title: display message title. Push message box View Push Message 1. Operation path: Main menu > Browser >Push message box. 2. You can select message list when there has Push message, and then click “Option” to select “Details”. Saved pages Save Webpage When browsing a webpage, click “Option”to select “Tools”, and then select “Save page”.
The settings of browser includes browser clearance, security settings, appearance and concerning browser. Clear Browse Message 1. Path: Main menu > Browser > Browser settings > Clear. 2. Select clear type including clear history, cache, cookies and login info. 3. You can clear away the message by clicking the clear type. Set up Security Parameter 1. Operation path: Main menu > Browser > Browser Settings > Security setting. 2. Select Setting type, and click “Ok” to open the parameter choice window. 3.
Create Network Settings 1. Operation path: Main menu > Browser > Network settings. 2. Click “Option” to select “New”, click “Ok” to open the setting page of new network configuration. 3. Input network parameter including profile name, homepage, connection mode and data account. 4. After finishing the input, click “Save” to reserve network configuration. Set up Default Network Configuration 1. Path: Main menu > Browser > Network settings. 2.
the standby status, and then enter into main functional menu to select [Entertainment]. Please install and use those reliably-originated application programs and software. The software developer must be capable of providing essential security protection against the attack of the virus software. Download Application Software Download Application Software 1. Operation path: Main menu > Entertainment. 2. Click “Option” to select “Download”, and then click “Ok”. 3.
7. select “Delete”, and then click “Ok”. If desired to comprehend relevant information of application software, you can click “Option” to select “Details” and then click “Ok”. Run Application Software Run Application Software 1. Operation path: Main menu > Entertainment. 2. If desired to run the application software, you can click[Central Key] to run the software. 3. Quit out the current application and return back the entertainment menu.
Photo Snapping Photo Snapping 1. Operation path: Main menu > Camera. 2. You can set the phone screen as view-selecting frame, then click side key, camera key or [Central Key] to snap what you need, the phone will generate the picture and display in the screen, and save to My Album automatically. 3. If desired to continue to snap, you can click [Central Key] to back to the view-selecting status. 4.
z z z z z z z z To camcorder: switch the video camera to snap mode. Photo album: switch to My Album of My stuff. My Album is as a folder for storing the default picture. Countdown: the function of self-timer includes Close/3 seconds/5 seconds/10 seconds, self-timer close is set in default. Effect: Close/Black and white/Negative/Brown/Reseda, special effect close is set in default. Frame mode: you can select different frames to screen.
9 9 9 9 9 Send: send the picture by MMS/E-mail/Buletooth. Set as: set up the picture as wallpaper/image of contacts. Delete: delete the picture. Rename: re-name the picture. Details: view the detailed information of the file, including name, format, type, creation date, size, resolution, position and file protection. Screening Video Screening Video 1. Operation path: Main menu > Camera. 2. Click “Option” to select “To camcorder” and click “Ok”. 3.
z z z z for screening film will be defaulted as “video”. Effect: Close/Black and white/Negative/Sepia/Aqura, Close is set in default. Settings: Quality, Image size, White balance, Record sound, Video type, Record time limit, Anti-banding, Night mode and Video default name. 9 Quality: Middle, Low, High, Middle is set in default. 9 Image size: 176X144 and 128X96, 176X144 is set in default. 9 White balance: Auto, Tungsten, Fluorescence, daylight, Cloudy, Auto is set in default.
Send Video Through MMS or E-mail 1. Operation path: Main menu >Messages >Multimedia/Email >New. 2. Select to add entry and click[Central Key]to open My stuff. 3. You can select the required video in the My stuff and click “Ok”. 4. You can click “Option” to select “Send” when the phone returns back the editing window of MMS or E-mail. 5. You can input the message of addressee and click[Central Key]to confirm the sending under the editing window of addressee.
Please confirm the following procedures you have operated before sending and receiving message: 1. Insert (U)SIM card. 2. Locate inside the wireless network service area and the network supports the message function. 3. Set up network access point. 4. Set up parameters for text message. 5. Set up parameters for multimedia message. 6. Set up parameters for Email. The phone can identify the supplier of (U)SIM card and can set up message parameters automatically as well.
Option Menu of Editing Text message: z Send: send the well-finished Text message contents and jump to the addressee editing window. z Insert: you can insert the message, commonly-used phrase and website of the contacts when editing the current Text message. z Save to draft: save the currently edited Text message into draft box and as draft. z Input mode: select to alter the input mode. z Input settings: set up the electable option of input mode. View Received Message 1.
9 9 9 9 9 Forward: forward the current SMS to operation window of editing SMS which contained original SMS contents. Delete: delete SMS. Call: use audio or video to call the number of current message addresser. Exstract: abstract the phone number/URL/E-mail in the message contents. Move to USIM card: move the SMS to the phone/USIM card. View Message Failed in Sending 1. Operation path: Main menu >Messages>Text message>Outbox. 2.
Option Menu of Sent Message: z Forward: forward the current successfully-sent message to other person. z Delete: delete the current selected message or the whole message list. z Delete all: clear up the currently sent mailbox. z Call: use audio or video to call the number of current message addresser. z View mode: display the message in the sent message list by date and subject. z Details: addressee, time and type. View/Edit Draft Message 1. Operation path: Main menu >Messages > Text message >Draftbox. 2.
z Message details: addressee, time and type. Cell Broadcast After you launch “Cell Broadcast” service, the message will be sent according the local area’s conditions. The “Cell Broadcast” does not aim to the phone number to send the message, but in accordance with the geography region. You will feel that all messages are together with you when you receive the “Cell Broadcast” service.
1. 2. Operation path: Main menu > Messages > Text message >Settings >Setting/Send setting/Default storage/Memory status. Select setting entry and input the relevant parameters of SMS account, and send relevant parameters and default memorizer. Multimedia Create and Send Multimedia 1. Operation path: Main menu > Messages > Multimedia > New. 2. Select the subject and click[Central Key]to input the subject under MMS editting status. 3.
13. If required to alter the sending mode, please use the operation path: Option >Change send mode>To/CC/BCC. 14. Click[Central Key]to send MMS after finishing the setting of contacts and sending mode. Option Menu of Editing Multimedia: z Send: send the well-finished MMS contents and jump to the addressee editing window. z Preview: preview the edited MMS. z Slide time: set up the interval of slide playing time. z Add page: add an edited page in the MMS.
9 9 9 9 9 Call: call the current MMS sender by audio/video. Save file: save the video, audio and image to the folder. Exstract: abstract the phone number, website and image. Delete: delete or delete a batch the selected MMS. Details: display the current attribute information of the current MMS, including sender, date, time and type. View the unsuccessfully-sent Multimedia: 1. Operation path: Main menu>Messages>Multimedia>Outbox. 2.
z z z z Delete all: clear up the current sent mailbox. Call: call the current SMS sender number by audio/video. View type: display the sent list of MMS by date and subject. Details: addressee, time and type. View/Edit Draft 1. Operation path: Main menu >Messages >Multimedia>Draft box. 2. Arrange MMS by time sequence to search the MMS to be viewed, if you are desired to continue to edit message in draft box, you can select draft entry and click[Central Key]to enter into the editing window. 3.
Option Menu of Multimedia Templates Entry: z Send: send the MMS templates to the contacts. z Delete: delete or delete a batch the selected MMS templates. z Delete all: clear up MMS templates. Multimedia Setting 1. Operation path: Main menu >Messages >Multimedia>Setting. 2.
Option Menu of Editing Email: z Send: send the well-finished E-mail contents and jump to the addressee editing window. z Add attachment: select the Add File from the My stuff. z Add vCard: select and add contact info from the Contacts. z Save to draft: save the well-redacted E-mail in the draft. View Received Email 1. Operation path: Main menu >Messages >Email>Inbox. 2. Arrange E-mail by time sequence to search a required E-mail. 3.
3. Click the[Central Key ]to view the detailed E-mail contents. Option Menu of Outbox Message: z Resend: resend the selected mail. z Delete: delete or delete a batch the selected E-mail. z Delete all: clear up the current outbox. z View mode: display the mail of mail-sending list by date and subject. z Details: from,subject,time,size,to,priority,attachment. Option Menu of Viewing unsent E-mail: 9 Resend: resend the selected mail. 9 Delete: delete or delete a batch the selected E-mail.
9 content. Details: from,subject,time,size,to,priority,attachment. View/Edit Draft 1. Operation path: Main menu >Messages >Email>Draft box. 2. Arrange E-mail by time sequence to search a required E-mail. 3. If you are desired to continue to edit message in draft box, you can select draft entry and click[Central Key]to edit, and click “Option” to select “Send” to send the mail.
the standby status, enter into the main function menu and select . Set up Current Contacts Display Set up Current Contacts Display 1. Operation path: Main menu > Contacts. 2. Click the “Option” to select “Contacts Display”, click “Ok” to select Phone /USIM Card/All. Operate Contact Data New Contact 1. Operation path: Main menu >Contacts. 2. Click “Option” to select “New”. 3. Select the setting entries and input the data of contacts in order.
phone number of the contacts. Option Menu under Contacts Status: z Call: call the selected contact by voice call. z Send message: edit Text message or MMS. z New: create the message of contact in contacts. z Edit: edit the message of the current contact in contacts. z Delete: delete the current selected contacts or delete a batch the selected contacts. z Copy to USIM/mobile: support the copy between USIM card and phone mutually, copy the curremt record/copy a batch selected records.
Edit Contact Reedit the possessed data of contacts. 1. Operation path: Main menu > Contacts. 2. Select the contact entry, click “Option” to select “Edit”, and then click “Ok”. 3. If the data of contact save in the phone, the contents which can be edited include: name, mobile number, video number, number, number type, group, E-mail, URL, birthday, ringtone, image and notes. If the data of contacts save in USIM card, the contents which can be edited: name and number.
z New: create the group. Option Menu of Customizing Group: z Edit: edit relevant data for current group, including group name, group ringtone and group image. z New: create the group. z Delete: delete a currently-selected group. Contacts-associated Function Set up the Ringtone and Image for Contact The phone only supports to set up the special ringtone and image for the contacts in Contacts. 1. Operation path: Main menu >Contacts. 2. Select a contact , click “Option” to select “Edit” and click “Save”. 3.
2. Click “Option” to select “Settings”. 3. Select “My business card” and click[Central Key]to open the business card message window. 4. Click “Send” to select the sending mode and click “Ok”. 5. The phone will open the message editing window and add business card in message. 6. After finishing message editing, you can click “Option” to select “Send”, click “Ok”. Input the message of addressee and click[Central Key]to send. Memory Status View Memory Status 1. Operation path: Main menu >Contacts. 2.
the setting of alarm clock. 4. If you are desired to activate the closed alarm clock, please click “On” to open the selected alarm clock under the list window. Calculator The phone supports the simple calculator function, including addition, subtraction, multiplication and division operations, radical sign operation, storage operation and operation number reverse. The calculator also includes radix point, operation number and operation results, and supporting within 8-digit input space. Calculator Usage 1.
z z z MS: this operation sign and MR MC are the stored operation signs. The operation sign is stored order, namely, the current operation number and operation results will be stored in EMS memory. But it has no operation function and can not fulfill any operation, therefore, it will not breach the current display contents. Note: it can not store multiple data, and the re-saved data will replace last stored data. The same data can be used for many times.
Option Menu under Recorder Status: z Record folder: turn to the page of record folder to play or view the specific message of record folder. z Setting: set up the storage position of record file, name of file is set in default and the record time is limited. World Time The phone supports displaying time of cities in different time zones. Search City Info via Focusing on Map 1. Operation path: Main menu > Tools >World Time. 2. Search city info via the [Navigation Keys]amid different time zones. 3.
3. Click “Option” to select “Summer Time” and click “Ok”. 4. Select a summer time status and click “Ok”. Option Menu of Time Zone Display: z Quick search: you can quickly search the required city by inputting initial letter of the name of city. z Summer time: launch or close summer time. z Set locate zone: set up the time of selected city to local time. Multimedia Multimedia includes media player and radio.
file you want to remove, and then click “Option” to unfold the option menu, select “Remove”, and then click “Yes”. Option Menu of Play List: z Add: add folder/files to the play list. z Remove: remove the current/ delete a batch file from the play list. Play Audio/Video Files 1. Operation path: Main menu > Multimedia > Media player. 2. Click[Central Key]to begin the media file in play list when the play list is full. 3.
Listen to the broadcast Please note that the effect of receiving broadcast by radio which depends on the coverage inner the customized region of broadcasting station. The antenna used by FM radio is not the antenna of wireless device. The function of FM radio will work normally as long as connecting with the compatible earphone or fittings. 1. Operation path: Main menu > Multimedia > Radio. 2. Activate the radio search, please click “Search”, the search will stop after searching the station.
For the resource file downloaded in the phone, you should transact the relevant processing such as DRM digital copyright management, you just can use it by obtaining licence information such as CEKs etc. when you use these resource files. If a file obtains the protection from the digital copyright, it can not be copied or sent. When DRM file used as wallpaper and ringtone etc.
Operate the File 1. Operation path: Main menu > My stuff > Images/Sounds/Videos/Applications/ Others. 2. Select and open the folder, select the required file. 3. Click the “Option” to select “Delete/Move/Copy”, and select specific operation mode: “Delete / Batch to delete”, “Move/ Batch to move”, “Copy/ Batch to copy”. 4. For the batch operation, using[Central Key]to select the required file, click “Option”, open option menu to select the specific operation.
9 9 9 9 Slides show: display the file by playing slide. Send: send thecurrent files by MMS/E-mail/Bluetooth. Delete: delete the current file. Details: display the current specific message of the file, including name, mode, type, time creation, size, resolution, position and file protection. Option Menu of Music Ring List: z Set as: set up the selected file as voice call ring/message alert/email alert. z Send: send the selected files by MMS/E-mail/Bluetooth.
z Details: display the current detailed message of the file, including name, mode, type, time creation, size, position and file protection. z Memory status: view the phone and occupied status of external memorizer. Option Menu of Application List: z Send: send the selected files by MMS/E-mail/Bluetooth. z Move: move the selected file from the current position to other position. z Copy: copy selected file to other position. z Delete: delete the selected file. z Rename: rename the current file.
z z z events. To certain day: skip to a designated date. Settings: set up alarm ringtones for different types of events, and set up the parameter for Week View including the date and name of Week View. Expired Event: display all outdated event logs. Event Recording Entry Create Event 1. Operation path: Main menu > Calendar. 2. Select newly-built event’s date in calendar, click[Central Key]to enter into the event management list in the present day. 3. Click “Option” to select “New event”. 4.
View Calendar View Events in Designated Date 1. Operation path: Main menu > Calendar. 2. Click “Option” menu to select “To certain day”, click “Ok’. 3. After inputting the date, click “Ok”. Week View 1. Operation path: Main menu > Calendar. 2. Click “Option” to select “Week view”, click “Ok’. 3. If there is an event log in a time interval, the week view will prominently display the time interval. Outdated Event 1. Operation path: Main menu > Calendar. 2.
restriction, Rate standard or replacement. Call Log View Call Log 1. Operation path: Main menu > Call log > Missed calls/Outgoing calls/ Incoming calls/All calls. 2. View call log entries. Save Record Number 1. Operation path: Main menu > Call log > Missed calls/Outgoing calls/ Incoming calls/All calls. 2. Select call log entry to open “Option”, select “Save number”, and then select save mode, click “Ok”. 3.
number. View the Transmission Data Capacity 1. Operation path: Main menu > Call log > Data transmission. 2. Click “Reset” to re-set and recalculate the data capacity. Review Call duration 1. Operation path: Main menu > Call log > Call duration. 2. Click “Reset” to reset and recalculate the call duration. Call cost Setting You can re-set the call cost calculation or set the relevant parameters related call cost. Call cost Re-set 1. Operation path: Main meun > Call log > Call cost. 2.
If desired to enter into setting menu, please click the central key under the standby status to enter into the main functional menu and then select [Settings]. Parameter Value Setting The general steps for setting parameter value. 1. Operation path: Main menu > Settings. 2. Select your required type of setting and select required setting of specific parameter items. 3. You can use the following operation method to set up the parameter value: z Use to launch or close a certain setting.
z z Key tone: set up whether to launch the key tone or not. Warning tone: set up whether to launch the warning tone or not. Items of Silent Mode Settings: z Voice call ring: set up ringtone of voice incoming call. z Message alert: set up prompt tone of message. z Email alert: set up prompt tone of E-mail. Display Settings Set up screen display parameters for the phone. 1. Operation path: Main menu > Settings > Display settings. 2.
key. Call Settings Set up the attribute parameter of call function. 1. Operation path: Main menu > Settings > Call settings. 2. Select required type of setting, then click to open parameter setting window to set up. 3. After finishing setting, click “Save” to save the setting value. Items of Call Settings: z Phone number: set up whether displaying the local phone number in the contactee’s phone, and the sending local phone number requires the network support.
1. 2. 3. Operation path: Main menu > Settings > Network settings. Select required type of setting, then click to open parameter setting window. Click “Ok” to select your required type of setting and to set up. Items of Network Settings: z Network mode: set up the connected network mode of the phone to support the automatic /GSM/WCDMA modes. z Search mode: set up the mode of network searching of the phone, including automatically and manually.
z z z z z lock, it will lock the keyboard automatically after operating one minute without key pressing under the standby status of the phone to prevent dialing the number wrongly. Phone lock: set up to launch or close the function of phone lock. After launching the phone lock, you should input the password of phone lock at a time when you turn on the phone. PIN lock: set up to launch or close the function of PIN lock.
Bluetooth Connection 1. Operation path: Main menu > Settings > Connection Settings > Bluetooth>Turn on. 2. Operation path: Main menu > Settings > Connection Settings > Bluetooth>Devices. 3. Click “Search”, searching a certain range of Bluetooth Device, and the divice name will be displayed on the device list if searching out Bluetooth device. 4. Select the device name of required connecting and click to match. 5. When the device enquires about the matched password, input a matched password value. 6.
account setting parameters and click “Save”. Reset Settings If at partial recovery of default settings, the default preset parameter settings are restored only when the phone leaves the factory and the user-created file info, such as contacts, message and file massage will be reserved. If at complete recovery of default settings when the phone leaves the factory, the user-created file info, such as contacts, message and file massage and so on will be deleted.
z z locking the phone. The phone lock password must be input before using it. Input PIN: select a function of inputting PIN upon powering on the device each time. The PIN must be input; (the PIN of USIM card should be input when firstly used the phone). Input PUK: input PIN wrongly in continually 3 times. The operator-supplied PUK must be input. (U)SIM Card is Error z (U)SIM card metal surface is contaminated. Wipe the (U)SIM card metal contacts with a piece of clean cloth.
z Check whether the volume is adjusted appropriately. z Use the phone at the place where the receiving quality is not good, such as near to the building or in the basement where the radio wave cannot reach. z Use the phone at the peak time, such as at the time of going on/off the duty, the channel is congested.
the stand-by time of the battery. Please move to the place where the signal is strong to use the phone or temporarily power the phone off. z The battery requires to be displaced with a new battery. Cannot charge z Bad contact! Please check that the plug is connected well. z Wipe the interfaces of the phone and battery with soft and dry clothing. z Please change the charging environment when charge at the environment below 0℃ or beyond 45℃.
Health & Safety Information RF/SAR Information Your phone is a low-energy wireless receiver. Upon powering it on, the phone will emit a low-level radio frequency (RF). All governments around the world use the national safety directives framed by specialized scientific organizations, such as ICNIRP and IEEE. These directives have established an approved level of radio waves exposure to common population.
recycling location, and should not discard with the life trash. The battery charging time depends on the remained capacity, type and adapter. The battery may be charged for thousands of times, but will wear out gradually. Please purchases new battery when the standby time is shorter than the normal time obviously. Please use the adapter and battery dedicated to or authorized for the phone. Please disconnect the adapter and the power supply when the adapter is not used.
Place the wireless phone at an easy-to-find place. Do not distract from the road to sue the phone. Should use the voice mailbox as far as possible to answer the call if receiving a call at an inconvenient time. Tell the caller that you are driving. If necessary, hang up during the traffic congestion and bad weather. It is dangerous in rainy, snowy, freeze, icy and traffic congestion situation.
where the phone is prohibited using or the phone may cause the risks. Should read the User’s Manual; understand the security instruction when the phone is connected with other device. The phone is prohibited connecting with other incompatible devices. The subscriber shall use the phone at the correct location (to the ear with the antenna pointing to top of the arm) in order to operate satisfactorily and protect your health. Please use the phone at applicable temperature range --10℃ to 50℃.
Automobile device: please consult the manufacturer in confirmation of the information because the wireless signal may affect the electronic devices installed in the automobile. Emergency Call The phone uses the wireless signal similarly with other rope less phone and cannot be ensured to connect under all cases. Thus, the important calls should do not rely on the wireless phone only, in stance medical emergency call. The phone shall be kept on with enough strong signals within the network coverage.
z z z z z z z z z z z z Please use it cautiously. The following suggestions will help you use the phone happily in a long time. Do not let the kids or pets contact the phone, or otherwise cause kid’s suffocation or damage the phone. Keep the phone dry, and avoid all types of liquids entering in interior of the phone so as to prevent against damage. Do not operate the phone with wet hands, or otherwise cause electric shock.
1. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
FCC ID label is placed on the mobile phone clearly visible to all persons at the time of purchase. 4. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This may not cause harmfull interference, and (2) this device must accept any interference received, includeing interference that may cause undesired operation.