User's Manual

Product Overview
IMILAB Home Security Camera A1 can be placed on a number of horizontal surfaces, such
as a writing desk, dining table, and coffee table. It can also be mounted on the wall.
Mounted IMILAB Home Security Camera A1 on a Wall
1. Drill two holes on the wall by using the base of the IMILAB Home Security Camera A1 as a
template. It is recommended that you mark the locations of the hole with a pencil before
drilling. The diameter of each hole is approximately 6 mm, and the depth is approximately
25 mm.
2. Insert the two plastic anchors into the holes on the wall.
3. Make sure to position the base unit so that the arrow
is pointing up. Secure the base unit in place by tightening
the screws into the plastic anchors.
4. Matching the grooves on the boom of the camera unit
with the raised area on the base unit. Press down until
the two surfaces are flush, then turn the camera unit in
either direction to lock it in position.
Package Contents : IMILAB Home Security Camera A1 x 1, power cable x 1,
wall mounting accessories pack x 1, user manual x 1
Read this manual carefully before use, and retain it for future reference.
Installation
Warning:
To avoid any damages or injuries, the device must be securely fastened to the floor/wall
as specified in the installation instructions.
When mounting the security camera on a wall:
Please note that the wall must be able to support at least triple the product's total
weight.
Playback
IMILAB Home Security Camera A1’s playback feature is only available aer installing a
compatible MicroSD card. Once a MicroSD card has been installed and the security camera
is turned on, videos will be recorded automatically. Aer entering the user interface of the
Playback feature, simply slide the bar on the timeline to select the time period you wish to
view.
Note:
The diagram is for reference only. Actual displays will vary based on different versions of the
Mi Home/Xiaomi Home app and your smartphone model.
Note:
The diagram is for reference only. Actual displays will vary based on different versions of the
Mi Home/Xiaomi Home app and your smartphone model.
Note:
The diagram is for reference only. Actual displays will vary based on different versions of the
Mi Home/Xiaomi Home app and your smartphone model.
MicroSD Slot
(Can be
revealed by
pushing the
lens upward)
Lens
Status
indicator
Loudspeaker
Micro-USB
Charging port
MIC
Reset Buon
Front View
Rear View
MicroSD
Indicator Light
Steady blue on: connected/device status is normal
Flashing blue: network error
Flashing orange rapidly: waiting for connection
Flashing orange slowly: system upgrade in progress
Installing a MicroSD Card
Make sure that the power to IMILAB Home Security Camera A1 is already disconnected.
Adjust the camera lens upward until the MicroSD slot is revealed, then insert the MicroSD
card into the slot (the side with contact points must be facing down).
Note: Please turn off the IMILAB Home Security Camera A1‘s power supply before inserting
or removing the MicroSD card. Please use a genuine Micro SD card
manufactured by a qualified supplier, with a reading/writing speed of no less than
U1/Class 10. (Maximum support capacity is 64 GB)
Restore Factory Seings
Press and hold the Reset buon to restore your device to factory seings.
Data stored on the MicroSD card is not deleted.
IMILAB Home Security Camera A1
User Manual
Automatic Surveillance
Home surveillance can be enabled or disabled in the Mi Home/Xiaomi Home app.
Available options include 24-hour, daytime, and nightime monitoring. You can also
create your own schedule and set the desired camera angle.
This product is able to detect movements within its field of view. Once movements
are detected, a video is recorded and you will receive a notification.
Install Mi Home app
Connect with Mi Home/Xiaomi Home App. This product works with Mi Home/Xiaomi Home
app. Control your device with Mi Home/Xiaomi Home app.
Scan the QR code to download and install the app. You will be directed to the connection
setup page if the app is installed already. Or search “Mi Home/Xiaomi Home” in the app
store to download and install it. Open Mi Home/Xiaomi Home app, tap “+” on the upper right,
and then follow prompts to add your device.
The app is referred to as Xiaomi Home app in Europe (except for Russia). The name of the
app displayed on your device should be taken as the default.
Note: The version of the app might have been updated, please follow the instructions based
on the current app version.
Supporting Infrared and Image-intensified Night Vision
The camera will automatically switch to night-vision mode based on changing light
conditions. The 6 built-in infrared night vision lights increase the nightvision distance up to
10 meters, so the camera can clearly capture video in the dark.
1. If the indicator light is flashing orange, that means the device is activated successfully.
If you do not see a flashing orange light, please press and hold the Reset buon to restart
the device to enter pairing mode.
2. Once the IMILAB Home Security Camera A1 is turned on, please do not aempt to rotate
its head by force. If the camera position is incorrect, adjustments can be made through
the app.
Product Instructions
Turning the Device On
IMILAB Home Security Camera A1 will automatically activate once the power cable is
inserted into the Micro-USB charging port.
Infrared night vision mode sample
Real-time Surveillance
Launch the Mi Home/Xiaomi Home app and select a IMILAB Home Security Camera A1 that
is already connected to monitor the surroundings in real-time. The camera’ s control
interface allows you to adjust the sharpness of the image,as well as to change the device’ s
vertical and horizontal viewing angles.
Additional features such as screen capture or record and remote communications can also
be performed.
Note:
The diagram is for reference only. Actual displays will vary based on different versions of the
Mi Home/Xiaomi Home app and your smartphone model.
HD
HD
Note:
The diagram is for reference only. Actual displays will vary based on different versions of the
Mi Home/Xiaomi Home app and your smartphone model.
Shared Remote Viewing
Through the IMILAB Home Security Camera A1 control interface in the Mi Home app, you
can set your security camera as a shared device under the general seings menu, and invite
your friends to view the camera remotely.
Your friends will be required to download the Mi Home/Xiaomi Home app and log in with
his/her Xiaomi account.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
Attention that changes or modification not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Note: This product has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonabl e
protection against harmful interference in a residential installation. This product generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this product does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC Statement
Share with Mi Account
Share with friends
Share with family
Share...
4G
10:19
4G
10:15
General seings
Home surveillance
Manage storage
Automation
Device sharing
Help
Manufacturer: Shanghai Imilab Technology co.,LTD
(a
Mi Ecosystem Company)
Address: Room 908, No. 1, Lane 399, Shengxia Rd., China Pilot Free Trade Zone,
Sh
anghai, China
For further information, please go to www.imilab.com.
Support: [e-mail]
For Business: [e-mail]
Specifications
Name: IMILAB Home Security Camera A1
Model: CMSXJ19E
Net Weight: 211g
Lens Angle: 110°
Resolution: 2304x1296
Power input: 5 V 2 A
Expandable Memory: MicroSD card (up to 256GB)
Dimensions: 112 mm x 76 mm x 76 mm
Operating Temperature: -10 °C to 50 °C
Compatible With: Android 4.4 or iOS 9.0 or later
Wireless Connectivity: Wi-Fi IEEE 802.11 b/g/n 2.4GHz
Hereby, Shanghai Imilab Technology Co., Ltd. declares that the radio
equipment type IMILAB Home Security Camera A1 is in compliance with
Directive 2014/53/EU.
Correct Disposal of this product. This marking indicates that product
should not be disposal with other household wastes throughout the
EU. To prevent possible harm to the environment or human health
from uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse sustainable reuse of material resources. To return your
used device, please use the return and collection systems or contact the
retailer where the product was purchased. They can take this product for
environment safe recycling.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be install
ed and operated with minimum distance 20cm
between the radiator & your body.
WEEE Disposal and Recycling Information