Installation Guide

SmartThings Cam 360
Welcome to your
Status Indicator
MIC
Installation Guide
Trouble Shooting
If the indicator light flashes amber, it means that the device has started up successfully.
If the indicator light is not flashing amber, please reset the device.
1.
In the event of app fails to operate:
Please re-start the app. If this status persists, please visit www.SmartThings.com.
2.
Status
Blue Slowly Blinking Voice communication
Amber Quickly Blinking Ready for QR scanning
Power off
ResetBlue Quickly Blinking
Alternately flashes
Blue and Amber
Firmware update
Blue on
No light
Power on
Amber on
Network is disconnected or
firmware update fail
LED Status Indicator
After login, select “+", and add device.
Connect your phone to WI-FI where device is used, and
download SmartThings App.
SmartThings is available to download on Android devices with at least 2GB of RAM, but
works best with devices running Android 5.0 or higher. For iOS devices, you'll need to be
running iOS 10 or later. Check https://itunes.apple.com/app/smartthings-samsung-con-
nect/id1222822904?mt=8 for more details.
SmartThings
1.
2.
3.
Select "Device", in the
"Add to this location" tab.
Add your camera by scanning the
QR code
7.
Plug your camera into an outlet and
wait until the light starts blinking
amber.
6.
4.
After select “By brand” , select
“Add device”.
My home-Living room
Successfully connected
SmartThings Cam 360
On
RESET
Speaker
Lens
Amber Slowly Blinking Recording
Add device manually
Reset
Button
Micro-USB
Charging Port
RESET
SmartThings
camera
Add device
Home appliances
Scan nearby
By device type By brand
Search
All brands
SmartThings
Add device Scan nearby
By device type By brand
Search
Add to this location
Camera groups
Voice assistant ?
Device
Room
Camera
Get started with your
Add your Camera by scanning the QR
code
The QR code will be detected automatically when it’s
positioned within the guide lines.
Camera
SmartThings
More devices
SmartThings Cam 360 ( IPC019D)
10.
After the installation is finished,
completion status is as shown in the
picture.
8.
Make sure your phone is near your
camera so they can connect.
9.
Please specify the location after
the connection is completed.
Connecting to Camera
Select a location and room
for your camera
My home
Add new location
5.
After select “Camera”，select “SmartThings Cam 360(IPC019D)”.
180º
180º
1. Indoor installation is recommended.
2.
Avoid
installing in wet or humid places.
3.
Avoid
installing in high temperature environments, such as near radiators, stoves or other
heat
sources.
4. Avoid installing on appliances that generate vibration, such as refrigerators or air conditioners.
5. Avoid installingit near devices that emit strong radio waves as this may degrade wi-fi
p
erformance.
6.
This
product can be placed on a flat surface, such as a desk or table.
7.
This
product can be mounted on a wall or celling with supporting installation accessories.
8.
This
product do not rotate head over allowed range (-180⁰ ~ +180⁰).
* Power on and Click QR icon, You can
also add a device without step 4,5,6
78 mm
78 mm