User's Manual

ManualsBrandsShanghai Imilab Technology ManualsCamera & PhotoIMILAB Wire-Free Home Security Camera

Infrared night vision mode sample

2018 3 2 20:51:05

The camera will be automatically switched to night vision

mode by IR-CUT according to the ambient light changes that

captured by the photosensor. With the incorporation of eight

infrared illuminators, the security camera is able to view up to

a distance of 9m and capture crystal clear images in the dark.

Supporting Infrared Night Vision

Through the IMILAB Wire-Free Home Security Camera control

interface in the Mi Jia app, you can set your security camera as

a shared device under the General Settings menu, and invite

your friends to view the camera remotely. Your friends will be

required to download the Mi Jia app and log in with his/her

Xiaomi account.

Shared Remote Viewingt

Launch the Mi Jia app and select a connected "IMILAB Wire-Free

Home Security Camera"-"IMILAB Wire-Free Camera Gateway" to

monitor the surroundings in real-

time. Through the camera's control

interface, users can perform screen

capture, screen record and remote

communication, etc.

Real-Time Monitoring

IMILAB Wire-Free Home ...

12MB / s

Monitoring Photo AlbumReview

06:20

IMILAB Wire-Free Home Security Camera

User Manual

Playback

Playback feature is only available after a compatible microSD

card is installed in the gateway. Once a MicroSD card has been

installed and the security camera is turned on, videos will be

recorded automatically.

In the IMILAB Wire-Free Home Security Camera control interface

in the Mi Jia app, click "Playback" to enter the page, then select

the time period you wish to view.

Automatic Monitoring

Conﬁgure this feature through the Mi Jia app " IMILAB Wire-

Free Camera GateWay "- " IMILAB Wire-Free Home Security

Camera " -"Automatic Monitoring".

This device is able to detect movements within its ﬁeld of

view. Once movements are detected, a video is recorded and

you will receive a notiﬁcation. Users can customize the

security time and set the alarm sensitivity, time interval, etc.

Read this manual carefully before use, and retain it for

future reference

Product Overview

Front view

Lens

Photosensor

Loudspeaker

MIC

Rear view

PIR sensor

Status

indicator

Power

Base

USB port

(Adjust the

camera's

ﬁeld of

view/FOV

by rotating)

Precautions

The suitable operationg temperature range for this product is

between -20℃~50℃. Don't use the product in an environment

with temperatures above or below the speciﬁed range.

When charging, the operating tempreture range for this

product is between 0°C~ 45°C. Don't charge the product in an

environment with temperatures above or below the speciﬁed

range.

Using the product in a low tempreture environment or

charging status will aﬀect its standby time. The actual

standby time is related to the user's environment and habbit.

To improve the product's performance, please do not place

the cameralens facing or next to a reﬂective surface, such as

glass windows/doors and white walls, which will cause the

image to appear overly bright inareas close to the camera

and darker in areas further away, or cause thecamera to

produce white images.

Please install the product in areas with Wi-Fi reception, and

try to place the device where the Wi-Fi signal is strong. In

addition, please keep the security camera away from metal

structures, microwave ovens, or other locations where signal

strength may be impacted.

Don't replace the battery in camera yourself—if not properly

replaced, there is a danger of explosion.

Battery (battery pack or batteries) must not be exposed to

sunlight, ﬁre, or similar overheating conditions.

This product is a low power consumption camera with battery

built-in. Don't use Real-Time Monitoring feature for long time

when charging, in order to avoid battery life loss.

All diagrams are for reference only. The auctual profuct may be

slightly diﬀerent with the diagrams due to the updates and

upgrades, please prevail in kind.

Packing content: IMILAB Wire-Free Home Security Camera,

IMILAB Wire-Free Camera GateWay, network cable, power cord,

wall mounting accessories pack (including expansion screw

pack), power adapter, user manual, camera bracket

USB charging

port

MicroSD slot

Reset button

Cable interface

Status indicator

Cooling holes

Note: Use MicroSD cards produced by reliable manufacturers

(maximum support capacity is 64G, only support FAT32 format).

It is recommended that the memory card read and write speed

should be no lower than U1/Class10.

Note: Install the gateway between the router and the camera.

2. Insert the two anchors in the

holes on the wall.

3. Make sure to position the gasket

and then secure it in place by

tightening the screws into the

plastic anchors.

4. Match the grooves on the bottom of the camera with the

raised area on the gasket. Press down until the two surfaces

are ﬂush, then turn the camera in either direction to lock it in

position.

When mounting the security camera on a wall:

Note:

The diagram is for reference only. Actual displays will vary