Design Ring Scanner Indication LED Scan window Touch area（Both Sides） Charging contact Ring strap(Replaceable) Wearing: wear on index finger on left or right hand Scanning: touch either side of ring body with thumb finger to trigger the scanning Ring Cradle（Bluetooth Receiver） Charging contact Bluetooth indicating LED Charging indicating LED Micro USB Loudspeaker
Charging 1. Charging ring scanner Red light: in charging Green light: fully charged Charging Illustration 1 Charging Illustration 2 Connect the ring cradle to power, click the ring scanner into the bottom of cradle with the scan window upward. Please note the power contacts of the ring and cradle must be touched. The red light indicates it is in charging, when the green light turns on, it’s finished charging.
The blue light on the cradle indicates the Bluetooth connected successfully Bluetooth connection barcode Connect with Tablet PC or phone: Enter the “Setting” in the Tablet PC or phone, click "Bluetooth search", find the Bluetooth serial number of the ring scanner, choose the corresponding Bluetooth serial number in the searching list. When the ring light turns on green, it indicates successful Bluetooth connection between ring and Tablet PC or phone.
ANDROID To connect ring scanner with Smart Phone or Tablet PC based on Android system, please scan the barcode "ANDROID". WINDOWS To connect ring scanner with Smart Phone or Tablet PC b a s ed o n W i n do w s s y s t e m , p l e a s e s c a n t h e b a rc o de "WINDOWS". Components Components Quantity Usage Ring Scanner 1 1. Decode 1D bar codes 2. Bluetooth slave Ring cradle 1 1. Charging cradle 2.
Specifications Weight 20g (excluding ring strap) Ring strap 10 pieces (5 different sizes) Scanner HYCO laser scanner Laser wavelength 650nm Bluetooth Bluetooth 4.2, BLE USB USB2.0 LED Three different colors Battery 200mAh@3.7V Charging time 2.
Functions 1. Scanning Wear on left or right index finger, touch left or right side of ring and aim at the barcode, the ring light turns green, it starts to scan. 2. Ring Straps Firstly, straightly pull out ring strap from the slot, then choose another ring strap and push it to the top of slot. Push the selected strap to the top of slot 5 different and replaceable ring straps 3. Ring Indicator Indicator Light The green light indicates successful scanning. The red light flashing indicates low battery.
Reset Bluetooth Name Restore factory settings Scan the barcode “Restore factory settings”, the ring will disconnect Bluetooth connection with terminal devices, and all the settings will change to factory default. 5. Charging cradle light indicator The blue light indicates successful Bluetooth connection between ring scanner and cradle. The green light indicates power on, The red light indicates charging, The red light off while the green light on in charging indicates fully charged. 6.
SERVICE 1.Warranty: one year for ring scanner, half year for battery and accessories. Notice » The ring window must be kept clean. Improper usage will breach the limited warranty clause. » Avoid rough objects scratching the window. » Remove stains from window by soft cloth. » Do not spray any liquid onto the window. » Use cleaning water to clean.
Shanghai Hyco Genyong Technology Co.,LTD Room 105, 1/F, Building B, No.999 of Huaxu Road, Qingpu District, Shanghai, CN Web: www.hyco.
Disclaimer Disclaimer @ 2018 Shanghai Hyco Genyong Technology Co., Ltd. All rights reserved. Please read through the manual carefully before using the product and operate it according to the manual. It is advised that you should keep this manual for future reference. Do not disassemble the device or remove the seal label from the device. Otherwise, Shanghai Hyco Genyong Technology Co., Ltd. does not assume responsibility for the warranty or replacement.
Function barcodes setup Change function of scanning after scanning the following barcodes: Device information "Device information" barcode includes device information (e.g. serial number, version number, Bluetooth version information).
Slow down data transmission through ring cradle Speed up data transmission through ring cradle In HID mode, scan the barcode "Speed up data transmission through ring cradle", it can accelerate the data transmission speed between the cradle and computer; scan the barcode "Slow down data transmission through ring cradle", it can slow down the data transmission between the cradle and computer.
Triggered continuous scanning Scan the barcode “Triggered continuous scanning”, ring could keep scanning when user keeps touching the ring. If user wants to change to common scanning, scan the “Manual Trigger Mode” bar code.
"Manual Trigger Mode" is set by default, user needs to touch ring once to scan once. Automatic Interval Scanning After scan "Automatic interval scanning" bar code, ring could automatically scan every 0.
Automatic interval scanning-reduce After scan "Automatic interval scanning-reduce" barcode, it can expedite the scanning speed once by 0.5 second, the fastest scanning speed is scanning once every 0.5 second. Automatic interval scanning-increase After scan "Automatic interval scanning-increase" barcode, it can slow down the scanning speed once by 0.5 second, the slowest scanning speed is scanning once every 3 seconds.
Common functional barcodes To meet different needs for customers, there are some functional barcodes used to meet the requirements for different customers. 扫描条码“触发式连续扫描”，持续触摸情况下保持长出光状态， 可实现条码批量快速扫描。 Add Enter Delete Enter After scan “Add Enter” barcode, it can automatically move to next line in the text field after each scanning. If user wants to close the function, scan “Delete Enter” barcode.
After scan "Add the tab" barcode, it can automatically move to next line in excel after each scanning. If user wants to close the function, scan "Delete the tab" barcode.
FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
W27 Ring Scanner User Manual Shanghai Hyco Genyong Technology Co.
