GPS tracker Manual V2.0 Please read the instructions carefully before use for correct and quick operation.
Chapter 1 Product Introduction 1.1. Product features Speeding alarm, Beidou/GPS+LBS positioning, electronic fence, power-down alarm (optional) 1.2. Working environment GSM: GSM850/900/1800/1900Mhz GPRS: Class 12, TCP/IP positioning accuracy: <10 meters Positioning time: average hot start: ≤2sec (open sky) Average cold start: ≤32sec (open sky) Working voltage/current: 9V-36V DC/32mA (12VDC) Product weight: 28g Body size: 74 (L) × 26 (W) × 12 (H) mm Working temperature: -20℃ to +70℃ 1.3.
Flashing web searching Flashing web searching Slow flashing network signal is normal Slow flashing network signal is normal Steady on Calling/Online Steady on Calling/Online No light SIM card not inserted No light SIM card not inserted Note: By default, when the terminal is stationary for 5 minutes,The LED light will automatically go out and wake up after shaking. Chapter 2 Installation 第一步、2.1. Install SIM cardThe firstInstructions step, insert the SIM card (must 2.1.
③ The device without battery does not have a battery switch, and it needs to be connected to an external power source to turn it on. 2.2. Wiring method (by default, only the positive and negative poles of the red and black wires are available, and the orange and yellow wires are optional) 2.3. Suggested installation diagram This terminal is a high-tech satellite positioning product. It is recommended that you choose professional units and personnel designated by the dealer for installation and debugging.
Note: 1. The product installation should face up to the sky; 2. If the windshield is pasted with a metal heat insulation layer or heating layer, it will reduce the signal strength of the satellite, which may make the satellite difficult to locate. Please change the terminal installation position Chapter 3 Device Application Operation Log in to the mobile phone client designated by the dealer or bind the terminal to the location service platform to query and set terminal-related parameters. 3.1.
4.1Report location information regularly The terminal regularly reports the location information to the platform in a hybrid way of satellite positioning and LBS.If the car is parked and not used for a long time,,The terminal will go to sleep,RestDo not upload location information during sleep, vibration can wake up the terminal 4.
Common 5 troubleshooting When the operating terminal has the following faults, please refer to the following troubleshooting solutions, such asIf you still can’t solve the problem, please sell to youBusiness or service provider! common problem Bad positioning signal Fault description Using terminals in places with poor reception, such as under high buildings or basements, cannot effectively receive satellite radio waves.
1. Special statement (1). If there are any technical changes to this product in the future, we will not notify you. (2). If the appearance and color of the product are changed, the actual product shall prevail. (3). Please take good care of this warranty card, and please show this card and the original purchase receipt during warranty. 2. Warranty regulations (1) Since the date of purchase, non-human damage failures enjoy one-year warranty service.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.