MOYA iSPA BUBBLE MASSAGE BATH APPLIANCE
FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Specifications for iSPA iSPA 0.05 ± 0.01PPM 5.
Control Panel Introduction Status Display Area Functional Control The control panel is divided into upper and lower areas, namely, status display area and functional control area. Status display area: display usage time, air quantity , ozone status, lock, Bluetooth connection and other device status. The functional control area adopts the touch control mode, and the user can touch the opening equipment, air quantity, time length and other related operations. Status display area 01 ��.Air volume ��.
Equipment Operation Instructions Before starting the machine, please confirm that the equipment power plug is installed on the leakage protector equipped with the product (see the 'leakage protector' on the next page), and check whether the power supply is normal, the equipment power indicator is on, indicating that the power supply is normal. Start and close equipment When the power supply is connected to the indicator light and turns on, press the power button ( ) to start the device.
Mobile Bluetooth Control The MOYA iSPA R30 has a Bluetooth wireless connection function, using the mobile client connection steps: 1) Turn on Bluetooth online in the phone. 2) Download and install the following "GSPA" mobile application or wechat applet to add attention. 3) After the installation or attention, open the application to add the device and make online matching, you can use the mobile phone to control the device.
Installation of iSPA iSPA Equipment Mount on Wall 20c m 160cm ~ 162cm GRAND MOYA iSPA Eauipment mount on the 15
Proper Handling of Soft Pad Connect both ends of the pipe to iSPA machine and bubble pad until tight enough. Comfirm two connection is stable for each usage. To disconnect the pipe from the Soft Mat, please screw out the connector lightly.
Safety Precautions for SPA Bath Notice : Not everyone suits a SPA bath 1.Maintain cleanliness and good ventilation in the bathroom. Do not use it in a badly-ventilated bathroom (when necessary, keep the bathroom door open to allow for good ventilation). 2.Do not install gas or heater in the bathroom and/or use it. 3.During bath, do not lock the door and ask families to pay attention to safety. 4.Do not submerge in the SPA for prolonged period under high temperature or beyond one's health capacity.
Four Principles of Bathing Safety The water temperature is below 40 ℃ No more than 10 minutes Sit high with your hands on the bathtub Do not take a bath if you feel unwell 18
Steps for a healthy bubble bath (SPA) 1. Before the spa session, rinse the body with water from the bathtub. Wash the body with the hot water, starting from the area farthest away from the heart, so as to allow the body to get used to the heat and alleviate the burden on the heart. 2. Add in appropriate amount of Moya SPA Bath oil. Mix the Bath oil and water well with one's hand. When in SPA, breathe deeply to take in the herbal smell. 3.
Troubleshooting Malfunctions Solution 1 Solution 2 Solution 3 Main device does not start up Check if the plug is firmly connected to power source; also check whether voltage is compatible Turn Timer and Bubble Contact our Intensity Control clock wise to proper setting; service if correctly done, "Input" departmant indicator will light up Soft pad will not stick fast to bathtub Check whether the surface of bathtub bottom is smoother or has marks/protrusions e.g.