%DVLF 2SHUDWLRQV (/3 3UHVHW &RXQW 2SHUDWLRQV 8.7 Preset Count Operations The Preset Count key is used to issue multiple labels for a recalled PLU. It may only be used on Non Weight and By Count type PLU’s. 8.7.1 Preset Count using Non Weight PLU Ex.) A quantity of 10 labels are needed for lettuce.
%DVLF 2SHUDWLRQV (/3 3UHVHW &RXQW XVLQJ %\ &RXQW 3/8 8.7.2 Preset Count using By Count PLU Ex.) A quantity of 10 labels is required for Bananas.
%DVLF 2SHUDWLRQV (/3 8VLQJ WKH 6$9( NH\ 8.8 SAVE Key Operations The SAVE key may be used to retain a recalled PLU’s information. The type of information that is saved depends on the PLU type that is recalled. 8.8.1 Weigh Mode Operations with SAVE key The information that is saved may be the Unit Price information and Preset Tare Weight.
%DVLF 2SHUDWLRQV (/3 1RQ :HLJK 0RGH XVLQJ WKH 6$9( NH\ 8.8.2 Non Weigh Mode Operations with SAVE key The information that is saved may be the Piece Count and the Unit Price.
%DVLF 2SHUDWLRQV (/3 %\ &RXQW 0RGH XVLQJ WKH 6$9( NH\ 8.8.3 By Count Mode Operations with SAVE Key The information saved may be the Quantity Purchased and Unit Price.
%DVLF 2SHUDWLRQV (/3 3/8 7\SH &KDQJH 2SHUDWLRQV 8.9 PLU Type Change Operations This special operation allows the operator to temporarily change a Weigh Mode PLU to a By Count Mode PLU. Ex.) Change PLU #79 Onions from $2.99 per pound to 3 Onions for $1.29. Note: PLU Type Change is only available for changing a Weigh Mode PLU into a By Count PLU.
3URJUDPPLQJ 6 0RGH (/3 3URJUDPPLQJ 6 0RGH 9. Programming (S Mode) Most of the information used in the scale is entered using the S Mode. (To access the S Mode press the twice.) Items like PLU or commodity information, Store Name and Address, Speed Keys, Date/Time and Discount Information can be programmed using the built in programming keyboard. The procedures used to program information into the scale are outlined in this section of the manual.
3URJUDPPLQJ 6 0RGH (/3 3URJUDPPLQJ 6 0RGH S12 MMX Discount Price S5 PLU Key File Used to program PLU Speed Key information. Used to assign PLU Discounts using a new unit price. S6 Function Key File S13 Clerk Number Used to assign special Function Keys to the Speed Key keyboard. Used to program Clerk information.
3URJUDPPLQJ 6 0RGH (/3 3/8 )LHOGV 9LVLEOH 6 0RGH 9.1 PLU Fields Visible (S0 Mode) The PLU Fields Visible function allows you to select the PLU information fields that will be displayed while programming PLU’s in the S Mode - S1 PLU File. This function should be completed prior to programming any PLU information in the S Mode – S1 PLU File. Refer to the list below for all of the possible PLU information fields available. Mode No. Field Name Remarks S0.0 PLU No.
3URJUDPPLQJ 6 0RGH (/3 3/8 )LHOGV 9LVLEOH 6 0RGH S0.20 VIP Price PLU Special Customer Price S0.21 Cost Price PLU Cost Price S0.22 Tare Weight PLU Tare Weight S0.23 Qty Non Weight or By Count PLU Piece Count S0.24 Net Wt PLU Net Weight S0.25 Message Special Sales Message S0.26 Ingredients PLU Ingredients S0.27 State N/A S0.28 Prt Sell By Date Print PLU Sell By Date S0.29 Prt Sell By Time Print PLU Sell By Time S0.30 Prt Cook By Date Print PLU Cook By Date S0.
3URJUDPPLQJ 6 0RGH (/3 3/8 )LHOGV 9LVLEOH 6 0RGH 9.1.1 Selecting PLU Fields To select the PLU Fields that will be used in the S Mode – S1 PLU File program follow the procedures outlined below. Note: You may save the information entered at any time and exit this program by pressing the SAVE key then the FEED/ESC key. You may also exit this program without saving any entered information by pressing the FEED/ESC key at any time. 1.) Start at the normal weigh mode screen 2.
3URJUDPPLQJ 6 0RGH (/3 6HOHFWLQJ 3/8 )LHOGV 6 0RGH 5.) Select PLU Number Field Status 0 = Not Visible 1 = Visible Ex.) Make PLU Number Field visible by pressing the number one key. Press the Print/* key. 6.) Select PLU Name Field Status 0 = Not Visible 1 = Visible Ex.) Make PLU Name Field visible by pressing the number one key. Press the Print/* key. 7.
3URJUDPPLQJ 6 0RGH (/3 6HOHFWLQJ 3/8 )LHOGV 6 0RGH Ex.) Make Unit Price Field visible by pressing the number one key. Press the Print/* key. 8.) Select Price Max Field Status 0 = Not Visible 1 = Visible Ex.) Make Price Max Field Not Visible by pressing the number zero key. Press the Print/* key. 9.) Select PLU Type Field Status 0 = Not Visible 1 = Visible Ex.) Make PLU Type Field visible by pressing the number one key. Press the Print/* key.
3URJUDPPLQJ 6 0RGH (/3 6HOHFWLQJ 3/8 )LHOGV 6 0RGH 10.) Select Label Format Field Status 0 = Not Visible 1 = Visible Note: If SPEC 14 is > 0 the Label Format Field will not be visible in S Mode – S1 PLU File regardless of this setting. Ex.) Make Label Format Field visible by pressing the number one key. Press the Print/* key. 11.
3URJUDPPLQJ 6 0RGH (/3 6HOHFWLQJ 3/8 )LHOGV 6 0RGH 12.) Select F1F2 Field Status 0 = Not Visible 1 = Visible Note: If SPEC 0 is = 1 the F1F2 Field will not be visible in S Mode – S1 PLU File regardless of this setting. Ex.) Make the F1F2 Field visible by pressing the number one key. Press the Print/* key. 13.) Select Item Code Field Status 0 = Not Visible 1 = Visible Ex.) Make Item Code Field visible by pressing the number one key. Press the Print/* key.
3URJUDPPLQJ 6 0RGH (/3 6HOHFWLQJ 3/8 )LHOGV 6 0RGH 14.) Select Barcode Type Field Status 0 = Not Visible 1 = Visible Note: If SPEC 0 is = 1 the Barcode Type Field will not be visible in S Mode – S1 PLU File regardless of this setting. Ex.) Make Barcode Type Field visible by pressing the number one key. Press the Print/* key. 15.) Select Main Group No. Field Status 0 = Not Visible 1 = Visible Ex.) Make Main Group No. Field not visible by pressing the number zero key.
3URJUDPPLQJ 6 0RGH (/3 6HOHFWLQJ 3/8 )LHOGV 6 0RGH Ex.) Make Tax Number Field not visible by pressing the number zero key. Press the Print/* key. 17.) Select BLC No. Field Status 0 = Not Visible 1 = Visible Ex.) Make BLC No. Field not visible by pressing the number zero key. Press the Print/* key. 18.) Select Tag No. Field Status 0 = Not Visible 1 = Visible Ex.) Make Tag No. Field not visible by pressing the number zero key. Press the Print/* key.
3URJUDPPLQJ 6 0RGH (/3 6HOHFWLQJ 3/8 )LHOGV 6 0RGH 19.) Select Weight Unit Field Status 0 = Not Visible 1 = Visible Ex.) Make Weight Unit Field not visible by pressing the number zero key. Press the Print/* key. 20.) Select Sell By Date Field Status 0 = Not Visible 1 = Visible Ex.) Make Sell By Date Field visible by pressing the number one key. Press the Print/* key. 21.
3URJUDPPLQJ 6 0RGH (/3 6HOHFWLQJ 3/8 )LHOGV 6 0RGH Ex.) Make Sell By Time Field visible by pressing the number one key. Press the Print/* key. 22.) Select Cook By Date Field Status 0 = Not Visible 1 = Visible Ex.) Make Cook By Date Field not visible by pressing the number zero key. Press the Print/* key. 23.) Select Pack Date Field Status 0 = Not Visible 1 = Visible Ex.) Make Pack Date Field not visible by pressing the number zero key. Press the Print/* key.
3URJUDPPLQJ 6 0RGH (/3 6HOHFWLQJ 3/8 )LHOGV 6 0RGH 24.) Select Pack By Time Field Status 0 = Not Visible 1 = Visible Ex.) Make Pack By Time Field not visible by pressing the number zero key. Press the Print/* key. 25.) Select VIP Price Field Status 0 = Not Visible 1 = Visible Ex.) Make VIP Price Field not visible by pressing the number zero key. Press the Print/* key.
3URJUDPPLQJ 6 0RGH (/3 6HOHFWLQJ 3/8 )LHOGV 6 0RGH 26.) Select PLU Cost Price Field Status 0 = Not Visible 1 = Visible Ex.) Make PLU Cost Price Field not visible by pressing the number zero key. Press the Print/* key. 27.) Select Tare Weight Field Status 0 = Not Visible 1 = Visible Ex.) Make Tare Weight Field visible by pressing the number one key. Press the Print/* key. 28.
3URJUDPPLQJ 6 0RGH (/3 6HOHFWLQJ 3/8 )LHOGV 6 0RGH Ex.) Make Quantity Field visible by pressing the number one key. Press the Print/* key. 29.) Select Net Weight Field Status 0 = Not Visible 1 = Visible Ex.) Make Net Weight Field not visible by pressing the number zero key. Press the Print/* key. 30.) Select Sales Message Field Status 0 = Not Visible 1 = Visible Ex.) Make Sales Message Field not visible by pressing the number zero key.
3URJUDPPLQJ 6 0RGH (/3 6HOHFWLQJ 3/8 )LHOGV 6 0RGH Press the Print/* key. 31.) Select Ingredients Field Status 0 = Not Visible 1 = Visible Ex.) Make Ingredients Field visible by pressing the number one key Press the Print/* key. 32.) Select State Field Status 0 = Not Visible 1 = Visible Ex.) Make State Field not visible by pressing the number zero key. Press the Print/* key.
3URJUDPPLQJ 6 0RGH (/3 6HOHFWLQJ 3/8 )LHOGV 6 0RGH 33.) Select Print Sell By Date Field Status 0 = Not Visible 1 = Visible Ex.) Make Print Sell By Date Field visible by pressing the number one key. Press the Print/* key. 34.) Select Print Sell By Time Field Status 0 = Not Visible 1 = Visible Ex.) Make Print Sell By Time Field visible by pressing the number one key. Press the Print/* key.
3URJUDPPLQJ 6 0RGH (/3 6HOHFWLQJ 3/8 )LHOGV 6 0RGH 35.) Select Print Cook By Date Field Status 0 = Not Visible 1 = Visible Ex.) Make Print Cook By Date Field not visible by pressing the number zero key. Press the Print/* key. 36.) Select Print Pack Date Field Status 0 = Not Visible 1 = Visible Ex.) Make Print Pack Date Field visible by pressing the number one key. Press the Print/* key. 37.
3URJUDPPLQJ 6 0RGH (/3 6HOHFWLQJ 3/8 )LHOGV 6 0RGH Ex.) Make Print Pack Time Field not visible by pressing the number zero key. Press the Print/* key. 38.) Select Enable Discount Field Status 0 = Not Visible 1 = Visible Ex.) Make Enable Discount Field visible by pressing the number one key. Press the Print/* key. 39.) Select Sale Inhibit Field Status 0 = Not Visible 1 = Visible Ex.) Make Sale Inhibit Field not visible by pressing the number zero key. Press the Print/* key.
3URJUDPPLQJ 6 0RGH (/3 6HOHFWLQJ 3/8 )LHOGV 6 0RGH 40.) Select Enable Price Limit Field Status 0 = Not Visible 1 = Visible Ex.) Make Enable Price Limit Field not visible by pressing the number zero key. Press the Print/* key. 41.) Select Nutrition Field Status 0 = Not Visible 1 = Visible Ex.) Make Nutrition Field not visible by pressing the number zero key. Press the SAVE key.
3URJUDPPLQJ 6 0RGH (/3 6HOHFWLQJ 3/8 )LHOGV 6 0RGH Press the FEED/ESC key.
3URJUDPPLQJ 6 0RGH (/3 3/8 )LOH 6 0RGH 9.2 PLU File (S1 Mode) The PLU File mode is used to program commodity or PLU information directly into the scale. There are 3 different types of PLU’s available, Weigh Mode, Non Weigh Mode and By Count Mode. Each of the different types contains information that is similar such as name, price, expiration dates and ingredients. Each PLU type also contains some information that is unique based on the PLU type selected.
3URJUDPPLQJ 6 0RGH (/3 3/8 )LOH 6 0RGH 3.
3URJUDPPLQJ 6 0RGH (/3 3URJUDPPLQJ D :HLJK 0RGH 3/8 6 0RGH 4.) Enter the PLU Number Ex.) Enter PLU Number 12 by pressing the number one key followed by the number two key. Press the Print/* key. 5.) Enter the PLU Name Note: The PLU Name may be up to 4 lines of text. The number of characters printed on each line is determined by the font size of the PLU Name. The larger the font size the less characters that will be printed on each line Ex.
3URJUDPPLQJ 6 0RGH (/3 3URJUDPPLQJ D :HLJK 0RGH 3/8 6 0RGH 6.) Enter the Unit Price Ex.) Enter a Unit Price of $2.99 by pressing the number two key and then the number nine key twice. Press the Print/* key. 7.) Enter the PLU Type 0 = Weigh type 1 = Non Weigh type 2 = By Count type Ex.) Enter 0 for Weigh mode PLU Type by pressing the number zero key. Press the Print/* key. 8.) Enter the Item Code Note: The Item Code is used in the barcode to identify the PLU.
3URJUDPPLQJ 6 0RGH (/3 3URJUDPPLQJ D :HLJK 0RGH 3/8 6 0RGH Ex.) Enter an item code of 1212 using the number keys. Press the Print/* key. 9.) Enter the Sell By Date Note: The Sell By Date that is printed on the label is a result of adding the value (0 – 999 days) entered here to the Pack Date. Ex.) Enter a Sell By Date of 5 days by pressing the number five key. Press the Print/* key. 10.
3URJUDPPLQJ 6 0RGH (/3 3URJUDPPLQJ D :HLJK 0RGH 3/8 6 0RGH Press the Print/* key. 11.) Enter the Tare Weight Note: The Tare Weight value must be in the resolution value of the scale. Ex.) Enter a Tare Weight value of .05 lbs by press the number five key. Press the Print/* key. 12.) Enter the Quantity Note: The Quantity field is only used on Non Weight and By Count type PLU’s. If a value is entered here it will be used if this PLU is Type Changed. (Section 8.9) Ex.
3URJUDPPLQJ 6 0RGH (/3 3URJUDPPLQJ D :HLJK 0RGH 3/8 6 0RGH 13.) Enter the Ingredient Message Ex.) The example PLU Ground Beef does not have any ingredients. Press the Print/* key. 14.) Select Status of Print Sell By Date 0 = Don’t Print Sell By Date 1 = Print Sell By Date Note: The Printing of the Sell By Date on the label is controlled by this setting in each PLU. Ex.) Select a status of Print the Sell by Date by pressing the number one key. Press the Print/* key.
3URJUDPPLQJ 6 0RGH (/3 3URJUDPPLQJ D :HLJK 0RGH 3/8 6 0RGH 15.) Select Status of Print Sell By Time 0 = Don’t Print Sell By Time 1 = Print Sell By Time Note: The Printing of the Sell By Time on the label is controlled by this setting in each PLU. Ex.) Select a status of Don’t Print the Sell By Time by pressing the number zero key. Press the Print/* key. 16.
3URJUDPPLQJ 6 0RGH (/3 3URJUDPPLQJ D :HLJK 0RGH 3/8 6 0RGH 17.) Select Status of Discount 0 = Disable PLU Discount 1 = Enable PLU Discount Note: The Discount status of each PLU is controlled by this setting. Ex.) Select a status of Enable the PLU Discount by pressing the number one key. Press the Print/* key. Press the SAVE key. Press the FEED/ESC key.
3URJUDPPLQJ 6 0RGH (/3 3URJUDPPLQJ D 1RQ :HLJK 0RGH 3/8 6 0RGH 9.2.2 Programming a Non Weigh Mode PLU (S1 Mode) In the example below the PLU Fields that will be used have been programmed using the S Mode – PLU Fields Visible examples in the previous section. Ex.) Create a Non Weigh Mode PLU for Apple that has a price of 1 for $ 0.29. Note: You may save the information entered at any time and exit this program by pressing the SAVE key then the FEED/ESC key.
3URJUDPPLQJ 6 0RGH (/3 3URJUDPPLQJ D 1RQ :HLJK 0RGH 3/8 6 0RGH Ex.) Enter PLU Number 15 by pressing the number one key followed by the number five key. Press the Print/* key. 5.) Enter the PLU Name Note: The PLU Name may be up to 4 lines of text. The number of characters printed on each line is determined by the font size of the PLU Name. The larger the font size the less characters that will be printed on each line Ex.) Enter Apple using the alpha keys on the programming keyboard.
3URJUDPPLQJ 6 0RGH (/3 3URJUDPPLQJ D 1RQ :HLJK 0RGH 3/8 6 0RGH Ex.) Enter a Unit Price of $0.29 by pressing the number two key and then the number nine key. Press the Print/* key. 7.) Enter the PLU Type 0 = Weigh type 1 = Non Weigh type 2 = By Count type Ex.) Enter 1 for Non Weigh mode PLU Type by pressing the number one key. Press the Print/* key. 8.) Enter the Item Code Note: The Item Code is used in the barcode to identify the PLU.
3URJUDPPLQJ 6 0RGH (/3 3URJUDPPLQJ D 1RQ :HLJK 0RGH 3/8 6 0RGH Press the Print/* key. 9.) Enter the Sell By Date Note: The Sell By Date that is printed on the label is a result of adding the value (0 – 999 days) entered here to the Pack Date. Ex.) Enter a Sell By Date of 7 days by pressing the number seven key. Press the Print/* key. 10.
3URJUDPPLQJ 6 0RGH (/3 3URJUDPPLQJ D 1RQ :HLJK 0RGH 3/8 6 0RGH 11.) Enter the Tare Weight Note: The Tare Weight is not used in the Non Weigh Mode. Ex.) A Non Weight type PLU does not use the Tare Weight field. Press the Print/* key. 12.) Enter the Quantity Ex.) Enter a Quantity of 1 by pressing the number one key. Press the Print/* key.
3URJUDPPLQJ 6 0RGH (/3 3URJUDPPLQJ D 1RQ :HLJK 0RGH 3/8 6 0RGH 13.) Enter the Ingredient Message Ex.) The example PLU Apple, does not have any ingredients. Press the Print/* key. 14.) Select Status of Print Sell By Date 0 = Don’t Print Sell By Date 1 = Print Sell By Date Note: The Printing of the Sell By Date on the label is controlled by this setting in each PLU. Ex.) Select a status of Print the Sell by Date by pressing the number one key. Press the Print/* key. 15.
3URJUDPPLQJ 6 0RGH (/3 3URJUDPPLQJ D 1RQ :HLJK 0RGH 3/8 6 0RGH Ex.) Select a status of Don’t Print the Sell By Time by pressing the number zero key. Press the Print/* key. 16.) Select Status of Print Pack Date 0 = Don’t Print Pack Date 1 = Print Pack Date Note: The Printing of the Pack Date on the label is controlled by this setting in each PLU. Ex.) Select a status of Print the Pack Date by pressing the number one key. Press the Print/* key. 17.
3URJUDPPLQJ 6 0RGH (/3 3URJUDPPLQJ D 1RQ :HLJK 0RGH 3/8 6 0RGH Ex.) Select a status of Enable the PLU Discount by pressing the number one key. Press the Print/* key. Press the SAVE key. Press the FEED/ESC key.
3URJUDPPLQJ 6 0RGH (/3 3URJUDPPLQJ D %\ &RXQW 0RGH 3/8 6 0RGH 9.2.3 Programming a By Count Mode PLU (S1 Mode) In the example below the PLU Fields that will be used have been programmed using the S Mode – PLU Fields Visible examples in the previous section. Ex.) Create a By Count Mode PLU for Bananas that has a price of 3 for $ 1.00. Note: You may save the information entered at any time and exit this program by pressing the SAVE key then the FEED/ESC key.
3URJUDPPLQJ 6 0RGH (/3 3URJUDPPLQJ D %\ &RXQW 0RGH 3/8 6 0RGH Ex.) Enter PLU Number 25 by pressing the number two key followed by the number five key. Press the Print/* key. 5.) Enter the PLU Name Note: The PLU Name may be up to 4 lines of text. The number of characters printed on each line is determined by the font size of the PLU Name. The larger the font size the less characters that will be printed on each line Ex.) Enter Bananas using the alpha keys on the programming keyboard.
3URJUDPPLQJ 6 0RGH (/3 3URJUDPPLQJ D %\ &RXQW 0RGH 3/8 6 0RGH Ex.) Enter a Unit Price of $1.00 by pressing the number 1 key and then the number zero key twice. Press the Print/* key. 7.) Enter the PLU Type 0 = Weigh type 1 = Non Weigh type 2 = By Count type Ex.) Enter 2 for By Count mode PLU Type by pressing the number two key. Press the Print/* key. 8.) Enter the Item Code Note: The Item Code is used in the barcode to identify the PLU.
3URJUDPPLQJ 6 0RGH (/3 3URJUDPPLQJ D %\ &RXQW 0RGH 3/8 6 0RGH Press the Print/* key. 9.) Enter the Sell By Date Note: The Sell By Date that is printed on the label is a result of adding the value (0 – 999 days) entered here to the Pack Date. Ex.) Enter a Sell By Date of 7 days by pressing the number seven key. Press the Print/* key. 10.
3URJUDPPLQJ 6 0RGH (/3 3URJUDPPLQJ D %\ &RXQW 0RGH 3/8 6 0RGH 11.) Enter the Tare Weight Note: The Tare Weight is not used in the By Count Mode. Ex.) A By Count type PLU does not use the Tare Weight field. Press the Print/* key. 12.) Enter the Quantity Ex.) Enter a Quantity of 3 by pressing the number three key. Press the Print/* key.
3URJUDPPLQJ 6 0RGH (/3 3URJUDPPLQJ D %\ &RXQW 0RGH 3/8 6 0RGH 13.) Enter the Ingredient Message Ex.) The example PLU Bananas, does not have any ingredients. Press the Print/* key. 14.) Select Status of Print Sell By Date 0 = Don’t Print Sell By Date 1 = Print Sell By Date Note: The Printing of the Sell By Date on the label is controlled by this setting in each PLU. Ex.) Select a status of Print the Sell by Date by pressing the number one key. Press the Print/* key. 15.
3URJUDPPLQJ 6 0RGH (/3 3URJUDPPLQJ D %\ &RXQW 0RGH 3/8 6 0RGH Ex.) Select a status of Don’t Print the Sell By Time by pressing the number zero key. Press the Print/* key. 16.) Select Status of Print Pack Date 0 = Don’t Print Pack Date 1 = Print Pack Date Note: The Printing of the Pack Date on the label is controlled by this setting in each PLU. Ex.) Select a status of Print the Pack Date by pressing the number one key. Press the Print/* key. 17.
3URJUDPPLQJ 6 0RGH (/3 3URJUDPPLQJ D %\ &RXQW 0RGH 3/8 6 0RGH Ex.) Select a status of Enable the PLU Discount by pressing the number one key. Press the Print/* key. Press the SAVE key. Press the FEED/ESC key.
9.2.4 Deleting a PLU Follow the steps below to delete a PLU from the scale. 1.) From the PLU Number Screen 2.) Enter the PLU Number to delete Ex.) Enter PLU Number 1 by pressing the number one key Press the VOID key Press the FEED/ESC key Press the FEED/ESC key.
3URJUDPPLQJ 6 0RGH (/3 6KRS 1DPH )LOH 6 0RGH 9.3 Shop Name File (S2 Mode) This programming mode allows you to enter up to 32 (1 – 32) different Shop or Store Names and Addresses. Each Shop Name can have up to 4 lines of text. Each line of text may have up to 28 characters depending on the font size and label format that is being used. 9.3.1 Entering Shop Name Information 1.) Start at the normal weigh mode screen 2.) Press the Mode Key twice 3.) Press the X key 4.
3URJUDPPLQJ 6 0RGH (/3 6KRS 1DPH )LOH 6 0RGH Press the Print/* key 102
3URJUDPPLQJ 6 0RGH (/3 (QWHULQJ 6KRS 1DPH ,QIRUPDWLRQ 6 0RGH 6.) Enter First Line of Shop Information Ex.) Store Name: Friendly Market Change to the Second Line of text 7.) Enter Second Line of Shop Information Ex.) Store Address: Street 200 Main Press the Print/* key 8.
3URJUDPPLQJ 6 0RGH (/3 (QWHULQJ 6KRS 1DPH ,QIRUPDWLRQ 6 0RGH Press the FEED/ESC key. Note: Repeat the steps above as required to input all Store Information. Keep in mind that there are 4 lines of information available.
3URJUDPPLQJ 6 0RGH (/3 'HOHWLQJ 6KRS 1DPH ,QIRUPDWLRQ 6 0RGH 9.3.2 Deleting Shop Name Information Follow the steps below to delete Shop Information from the scale. 1.) From the Shop Number Screen 2.) Enter the Shop Number to delete Ex.
3URJUDPPLQJ 6 0RGH (/3 'HOHWLQJ 6KRS 1DPH ,QIRUPDWLRQ 6 0RGH Press the FEED/ESC key.
3URJUDPPLQJ 6 0RGH (/3 'HSDUWPHQW )LOH 6 0RGH 9.4 Department File (S3 Mode) The Department File program allows you to categorize your PLU information into departments. Departments may be numbered from 1 – 99. The departments that are defined may also be assigned to groups using S Mode – S4 Main Group File. 9.4.1 Entering Department Information 1.) Start at the normal weigh mode screen 2.) Press the Mode Key twice 3.) Press the X key twice 4.) Press the Print/* key 5.
3URJUDPPLQJ 6 0RGH (/3 'HSDUWPHQW )LOH 6 0RGH Press the Print/* key 6.) Enter Department Name Ex.) Department One Name: Meat Press the Print/* key 7.
3URJUDPPLQJ 6 0RGH (/3 'HOHWLQJ 'HSDUWPHQW ,QIRUPDWLRQ 6 0RGH 9.4.2 Deleting Department Information Follow the steps below to delete Shop Information from the scale. 1.) From the Department Number Screen 2.) Enter the Department Number Ex.
3URJUDPPLQJ 6 0RGH (/3 'HOHWLQJ 'HSDUWPHQW ,QIRUPDWLRQ 6 0RGH Press the FEED/ESC key 110
3URJUDPPLQJ 6 0RGH (/3 0DLQ *URXS )LOH 6 0RGH 9.5 Main Group File (S4 Mode) The Main Group File is used to further categorize the PLU information stored in the scale. Main Groups are linked to Departments and can be linked to individual or multiple scales. 9.5.1 Entering Main Group Information 1.) Start at the normal weigh mode screen 2.) Press the Mode Key twice 3.) Press the number four key then press the X key Note: This has the same results as pressing the X key three times. 4.
3URJUDPPLQJ 6 0RGH (/3 0DLQ *URXS )LOH 6 0RGH Press the Print/* key 112
3URJUDPPLQJ 6 0RGH (/3 (QWHULQJ 0DLQ *URXS ,QIRUPDWLRQ 6 0RGH 6.) Enter Main Group Name Ex.) Main Group One Name: Beef Press the Print/* key 7.) Enter the Department Number Ex.) Enter Department Number 1 by pressing the number one key Note: This will be the Department Number that the Main Group is linked to. Press the Print/* key 8.
3URJUDPPLQJ 6 0RGH (/3 (QWHULQJ 0DLQ *URXS ,QIRUPDWLRQ 6 0RGH Press the FEED/ESC key 114
3URJUDPPLQJ 6 0RGH (/3 'HOHWLQJ 0DLQ *URXS ,QIRUPDWLRQ 6 0RGH 9.5.2 Deleting Main Group Information Follow the steps below to delete Main Group information. 1.) From the Main Group Number Screen 2.) Enter the Main Group Number to delete Ex.
3URJUDPPLQJ 6 0RGH (/3 'HOHWLQJ 0DLQ *URXS ,QIRUPDWLRQ 6 0RGH Press the FEED/ESC key 116
3URJUDPPLQJ 6 0RGH (/3 3URJUDPPLQJ D 6SHHG .H\ RQ /HYHO 6 0RGH 9.6 PLU Key File (S5 Mode) The PLU Key File mode is used to assign programmed PLU’s to the Speed Keys. The Speed Keys are configured with 3 levels of 56 keys or a total of 168 possible Speed Keys available. Follow the steps outlined below to assign PLU’s to the Speed Keys. Note: Please keep in mind that if there is Function Key (S-Mode S6 FUNC.
3URJUDPPLQJ 6 0RGH (/3 3URJUDPPLQJ D 6SHHG .H\ RQ /HYHO 6 0RGH 4.) Press the Print/* key Note: Refer to the figure above for an explanation of the display. Ex.) Assign PLU number 12 to Speed Key number 4 on Speed Key Level number 1. 5.) Enter the Speed Key Number Ex.) Enter Speed Key number four by pressing the Speed Key numbered 4 one time. 6.) Enter the PLU Number Ex.) Enter PLU number by pressing the number one key followed by the number two key.
3URJUDPPLQJ 6 0RGH (/3 3URJUDPPLQJ D 6SHHG .H\ RQ /HYHO 6 0RGH Press the SAVE key.
3URJUDPPLQJ 6 0RGH (/3 3URJUDPPLQJ D 6SHHG .H\ 8VLQJ 0XOWLSOH /HYHOV 6 0RGH 9.6.2 Programming a Speed Key Using Multiple Levels Ex.) Assign PLU number 12 to Speed Key number 4 on Speed Key Level number 1 Assign PLU number 18 to Speed Key number 4 on Speed Key Level number 2 Assign PLU number 25 to Speed Key number 4 on Speed Key Level number 3 1.) Start at the normal weigh mode screen 2.) Press the Mode Key twice 3.
3URJUDPPLQJ 6 0RGH (/3 3URJUDPPLQJ D 6SHHG .H\ 8VLQJ 0XOWLSOH /HYHOV 6 0RGH 5.) Enter the Speed Key Number Ex.) Enter Speed Key number four by pressing the Speed Key numbered 4 one time. 6.) Enter the Level 1 PLU Number Ex.) Enter Level 1 PLU number by pressing the number one key followed by the number two key. Press the SAVE key.
3URJUDPPLQJ 6 0RGH (/3 3URJUDPPLQJ D 6SHHG .H\ 8VLQJ 0XOWLSOH /HYHOV 6 0RGH Press Speed Key number four again. Note: Pressing Speed Key number four again selects Level 2. Ex.) Enter Level 2 PLU number by pressing the number one key followed by the number eight key. Press the SAVE key. Press the Print/* key Press Speed Key number four again. Note: Pressing Speed Key number four again selects Level 3. Ex.
3URJUDPPLQJ 6 0RGH (/3 3URJUDPPLQJ D 6SHHG .H\ 8VLQJ 0XOWLSOH /HYHOV 6 0RGH Press the SAVE key. Press the FEED/ESC key Note: The Multiple Level Speed Key programming procedure must be executed without interruption for the procedure to work as explained. If it is not executed without interruption you may have to press the Speed Key 4 twice to access the Level 2 and three times to access the Level 3 keys.
3URJUDPPLQJ 6 0RGH (/3 )81& .H\ )LOH 6 0RGH 9.7 FUNC Key File (S6 Mode) This mode is used to assign special functions to the Speed Keys. There are seven different function keys that can be assigned to any of the Speed Keys. Once a function is assigned to a Speed Key that key will no longer have multiple levels, it will only be that function. Function Keys available are: •Discount Amount •Discount Rate •Shop Number •Total Label •Subtotal Label •Label Format •Clerk Logon/Logoff 9.7.
3URJUDPPLQJ 6 0RGH (/3 )81& .H\ )LOH 6 0RGH 4.) Press the Print/* key 5.) Assign the Discount Amount function to a Speed Key Ex.) Do Not Use the Discount Amount function. Enter a 0 by pressing the number zero key Press the Print/* key 6.) Assign the Discount Rate function to a Speed Key Ex.) Do Not Use the Discount Rate function.
3URJUDPPLQJ 6 0RGH (/3 )81& .H\ )LOH 6 0RGH 7.) Assign the Change Shop No. function to a Speed Key Ex.) Assign the Change Shop Number function to Speed Key number fifty five. Enter a 55 by pressing the number five key twice. Press the Print/* key 8.) Assign the Clerk Logon/Logoff function to a Speed Key Ex.) Do Not Use the Clerk Logon/ Logoff function. Enter a 0 by pressing the number zero key Press the Print/* key 9.) Assign the Sum Label function to a Speed Key Ex.
3URJUDPPLQJ 6 0RGH (/3 )81& .H\ )LOH 6 0RGH Press the Print/* key 10.) Assign the Sub Sum Label function to a Speed Key Ex.) Do Not Use the Sub Sum Label function. Enter a 0 by pressing the number zero key Press the Print/* key 11.) Assign the Change Label Format No. function to a Speed Key Ex.) Assign the Change Label Format Number function to Speed Key number fifty one. Enter a 51 by pressing the number five key and the number one key.
3URJUDPPLQJ 6 0RGH (/3 )81& .H\ )LOH 6 0RGH 12.
9.8 Upgrade (S7 Mode) The Upgrade mode provides a method to update the scale’s firmware version. This function is usually performed by a service technician. The new firmware file may be installed using a USB memory stick. 1.) Start at the normal weigh mode screen 2.) Press the Mode Key twice 3.) Press the number seven key then press the X key Note: This has the same results as pressing the X key six times. 4.) Press the Print/* key 5.) Insert the USB Memory Stick Ex.
Press the SAVE key. Note S Mode tri mark will flash. Screen changes to Reboot. Scale reboots. Note: During the reboot process the new firmware version should be displayed. Picture may not reflect your firmware version. 6.) Remove the USB Memory Stick.
9.9 System Time File (S8 Mode) The System Time File is used to program the date and time in the scale. The input method must follow the scale’s date and time format settings. This date and time setting is used as the reference for all other date and time functions. 1.) Start at the normal weigh mode screen 2.) Press the Mode Key twice 3.) Press the number eight key then press the X key Note: This has the same results as pressing the X key seven times. 4.) Press the Print/* key 5.) Enter New Date Ex.
Press the Print/* key 6.) Enter New Time Ex.) Enter new time of 10:15 AM (101500) using the number keys. Press the Print/* key Press the SAVE key. Press the FEED/ESC key.
3URJUDPPLQJ 6 0RGH (/3 %URZVH &$/ 5HFRUG 6 0RGH 9.10 Browse System File (S9 Mode) This mode is used to browse through the System information. It allows you to view items such as the number of PLU’s, Departments and Main Groups that are programmed in the scale. You can also view the number of logos or label formats that are in the scale. 1.) Start at the normal weigh mode screen 2.) Press the Mode Key twice 3.
3URJUDPPLQJ 6 0RGH (/3 %URZVH &$/ 5HFRUG 6 0RGH Press the Print/* key 6.) Display the number of Departments Press the Print/* key 7.) Display the number of Main Groups Press the Print/* key 8.
3URJUDPPLQJ 6 0RGH (/3 %URZVH &$/ 5HFRUG 6 0RGH 9.) Display the number of Pictures Press the Print/* key 10.) Display the number of MPEG’s Press the Print/* key 11.
3URJUDPPLQJ 6 0RGH (/3 %URZVH &$/ 5HFRUG 6 0RGH 12.) Display the number of Addresses Press the Print/* key 13.) Display the number of Labels Press the Print/* key 14.
3URJUDPPLQJ 6 0RGH (/3 %URZVH &$/ 5HFRUG 6 0RGH 15.) Display the number of Logos Press the Print/* key Press the FEED/ESC key Press the FEED/ESC key.
3URJUDPPLQJ 6 0RGH (/3 %URZVH &$/ 5HFRUG 6 0RGH 9.11 Browse CAL Record (S10 Mode) Using this mode allows you to view the Calibration record of the scale. Each record shows the Date and Time of the Calibration as well as the amount of weight used to Calibrate the scale during that session. 1.) Start at the normal weigh mode screen 2.) Press the Mode Key twice 3.
3URJUDPPLQJ 6 0RGH (/3 %URZVH &$/ 5HFRUG 6 0RGH 6.) Display next Calibration record Note: Record states the scale was calibrated on November 19, 2016 at 13:16PM using 60.00 pounds. 7.) Display next Calibration record Note: Record states the scale was calibrated on June 30, 2017 at 09:30AM using 60.00 pounds. Press the Print/* key 8.) Display next Calibration record Note: This record is the first record viewed. This scale had been calibrated 3 times.
3URJUDPPLQJ 6 0RGH (/3 %URZVH &$/ 5HFRUG 6 0RGH Note: This example scale had only been calibrated three times, your scale may have several more records. The procedure to view all of them is the same as viewing these three.
3URJUDPPLQJ 6 0RGH (/3 00; Ń 'LVFRXQW 5DWH 6 0RGH 9.12 MMX – Discount Rate (S11 Mode) The MMX mode provides the ability to apply discounts to programmed PLU’s. The S11 Mode allows you to discount PLU’s based on a Percentage Rate. The discounts may be programmed to be active based on a date and time schedule. 9.12.1 Entering a PLU using Discount Rate 1.) Start at the normal weigh mode screen 2.) Press the Mode Key twice 3.
3URJUDPPLQJ 6 0RGH (/3 00; Ń 'LVFRXQW 5DWH 6 0RGH Press the Print/* key 142
3URJUDPPLQJ 6 0RGH (/3 (QWHULQJ D 3/8 8VLQJ 'LVFRXQW 5DWH 6 0RGH 6.) Enter the Discounted PLU Number Ex.) Select PLU Number 12 for Discounting by pressing the number one key and then the number two key. Press the Print/* key 7.) Enter the Discount Rate Ex.)Use 5% as a Discount Rate by pressing the number five key then the number zero key twice. Press the Print/* key Note: The current date will be displayed.
3URJUDPPLQJ 6 0RGH (/3 (QWHULQJ D 3/8 8VLQJ 'LVFRXQW 5DWH 6 0RGH Press the Print/* key Note: The current date will be displayed. If you wish to use the current date you can just press the Print/* key again. 9.) Enter the Discount End Date Ex.) Enter an end Date of December15, 2016 (121516) using the number keys. Press the Print/* key 10.) Enter the Discount Start Time on each day in the date range Ex.) Use the default Start Time of midnight.