Smart Building Blocks Product Manual
Install the App www.tinkamo.com/help www.tinkamo.com/app Before you start using the product, please scan the QR code above to read the help Manual and install the Tinkamo App, or visit the official website "www.tinkamo.com/help" and "www.tinkamo.com/app" to read and download.
Product family Actuator series Motor actuator Servo actuator Core module Controller series Button controller Slider controller ※You may not own all the modules, it's actually based on the packaging.
Product family Sensor series Distance sensor Line sensor Display series Color pixel display ※You may not own all the modules, it's actually based on the packaging.
Product family Mechanical series Gearbox module ※You may not own all the modules, it's actually based on the packaging.
Code with Line ™ Step one: *Motor/Sevro actuator does not need this step Align the bottom of the function module with the top of the core module to make them snap together magnetically. Step two: Turn on the power switch at the bottom of the module, open the Tinkamo App, enter the "My ideas" and click"Create!" to create a new Line ™ coding project.
Code with Line ™ Step four: The connection can be completed by dragging (or tapping) the button icon to the center of the screen. At the same time, the color of the bluetooth status LED on the button module will be the same as the color in the lower right corner of the button icon. At this point, pressing the real button module will cause the same response from the buttons in the App on screen.
Specifications Actuator series Motor actuator Size: 34mm x 34mm x 48mm Battery rated voltage: 3.7V Battery rated capacity: 300mAh Rated charging voltage and current: 5V0.2A Charging time: 7.5h (typical) Battery endurance: 12h (typical)* Cross shaft connector At 3.0V: Speed: 70±10% rpm (no-load speed) Stalling torque: 280g.cm Min Operation Frequency:2400-2483.
Specifications Actuator series Servo actuator Size: 34mm x 34mm x 75mm (steer head vertical state) Rotation angle: ± (60 ° ± 5 ° ) Battery rated voltage: 3.7V Battery rated capacity: 300mAh Rated charging voltage and current: 5V0.2A Brick connector Peg connector Charging time: 7.5h (typical) Battery endurance: 11.5h (typical)** Operation Frequency:2400-2483.
Specifications Actuator series Core actuator Size: 34mm x 34mm x 31mm Battery rated voltage: 3.7V Battery rated capacity: 300mAh Rated charging voltage and current: 5V0.2A 5-pin magnetic connector Charging time: 4h (typical) Life time: 10h (typical) *** Operation Frequency:2400-2483.
Specifications Controller series Button controller Slider controller Knob controller Joystick controller Size: 30mm x 30mm x 20mm Service life: >1000 times (typical) Size: 30mm x 30mm x 30mm Effective rotation angle: 180 ° ± 10 ° Working temperature: 5 ° C ~ 35 ° C Size: 30mm x 30mm x 22mm Effective sliding stroke: 10±0.5mm Size: 30mm x 30mm x 20mm Operating temperature range: 5 ° C ~ 35 ° C Sliding handle force: 12±5mNm (120±50gf.
Specifications Sensor series Distance sensor Size: 30mm x 30mm x 13mm Minimum sensing distance: 2cm Maximum sensing distance: 150cm Color sensor Size: 30mm x 30mm x 24mm Maximum detectable color depth:24bit Line sensor Size: 30mm x 30mm x 17mm Best working distance: 3.5~10.
Specifications Display series Color pixel display Size: 30mm x 30mm x 20mm Total LEDs:25pcs Luminous intensity (one LED,typical, no filter): Red: 100mcd, Green: 300mcd, Blue: 90mcd.
Specifications Mechanical series Gearbox module Size: 30mm x 32mm x 33mm Minimum input and output speed ratio: 1:2 Maximum input and output speed ratio: 2:1 Torque input connector (connected to the Motor actuator) Semi-peg connector Torque output connector Grabber module Size: 34mm x 42mm x 54mm Maximum opening angle: 120° Maximum snatch weight: 500g Torque input connector (connected to the Motor actuator) Brick connector Grabber gear set
Manufacturer info. Tinkamo Smart Building Blocks - Play Kit/Tinker Kit Shanghai Chuangdou Technology Co., Ltd. 2nd Floor, Tongji Technology Building, No.46 Guokang Road, Yangpu District, Shanghai,China Manufacturer Name: Shanghai Chuangdou Technology Co., Ltd. Manufacturer 2nd Floor, Tongji Technology Building, No.
FCC info. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Changes or modifications not expressly approved by the part responsible for compliance could void the user's authority to operate the equipment.
FCC info. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
Trouble shooting If the Bluetooth status LED is always white and the module is not recognized by the app, try to toggle the switch and restart the module to recover. If the module has the magnetic connector and need to be used with the core actuator module can not connected to the app, the magnetic connector Pogopin may be contaminated. Turn off the power, disconnect the charging cable, and try to wipe the cleaning interface with cotton and reuse it.
Custom care If you have any problems during use, please contact us by our website "www. tinkamo.com" or e-mail address"listen@tinkamo.com".We will answer your questions as soon as possible.
Warranty Card User info. User name:_______________Phone:_____________________ Address:_____________________________________________ Sales info.
Certificate Certificate This product is rigorously tested to meet the standards and is approved for sale.
Copyright © 2016-2019 Tinkamo. All Rights Reserved. Tinkamo Text, T-Shaped Face and Monkey Head are trademarks of Tinkamo Inc.